Digital Commons Network^™

Field Investigation Of Stream-Aquifer Interactions: A Case Study In Coastal California, Devin Pritchard-Peterson

Master's Theses

This study is a detailed investigation of the dynamic interaction between a stream and an alluvial aquifer at Swanton Pacific Ranch in the Scotts Creek watershed in Santa Cruz County, California. The aquifer is an important source of groundwater for cropland irrigation and for aquatic ecosystem support. The potential for groundwater pumping to deplete Scotts Creek stream flows is a source of serious concern for land managers, fisheries biologists, and regulatory agencies due to the presence of federally protected steelhead trout (Oncorhynchus mykiss) and coho salmon (Oncorhynchus kisutch). An understanding of the interaction between the stream and pumped aquifer will …

Analyzing Global Cyber Attack Correlates Through An Open Database, Brady Benjamin Aiello

Master's Theses

As humanity becomes more reliant on digital storage and communication for every aspect of life, cyber attacks pose a growing threat. However, cyber attacks are generally understood as individual incidents reported in technological circles, sometimes tied to a particular vulnerability. They are not generally understood through the macroscopic lens of statistical analysis spanning years over several countries and sectors, leaving researchers largely ignorant of the larger trends and correlates between attacks. This is large part due to the lack of a coherent and open database of prominent attacks. Most data about cyber attacks has been captured using a repository of …

Use Of Manifolds In The Insertion Of Ballistic Cycler Trajectories, Oliver K. Morrison

Master's Theses

Today, Mars is one of the most interesting and important destinations for humankind and copious methods have been proposed to accomplish these future missions. One of the more fascinating methods is the Earth-Mars cycler trajectory which is a trajectory that accomplishes repeat access to Earth and Mars with little to no fuel-burning maneuvers. This would allow fast travel to and from Mars, as well as grant the possibility of multiple missions using the same main vehicle.

Insertion from Earth-orbit onto the cycler trajectory has not been thoroughly ex- plored and the only existing method so far is a Hohmann-esque transfer …

Pseudo Power Law Statistics In A Jammed, Amorphous Solid, Jacob Brian Hass

Physics

Simulations have shown that in many solid materials, rearrangements within the solid obey power-law statistics. A connection has been proposed between these statistics and the ability of a system to reach a limit cycle under cyclic driving. We study experimentally a 2D jammed solid that reaches such a limit cycle. Our solid consists of microscopic plastic beads adsorbed at an oil-water interface and cyclically sheared by a magnetically driven needle. We track each particles trajectory in the solid to identify rearrangements. By associating particles both spatially and temporally, we can measure the extent of each rearrangement. We study specifically the …

Development Of Low Cost, Environmentally Friendly And High Strength Carbon Foams From Bread And Cake, Laura Mountain-Tuller

Materials Engineering

Carbon foam is a high niche material that consists of a highly porous, three-dimensional cellular network that is characterized by extremely high strength-to-weight ratios and low thermal conductivity. Due to these properties, carbon foams excel in structural and thermal applications, especially in the aerospace industry. Typically, carbon foams are formed through a heating process called pyrolysis of polymer precursors with high carbon content. This process is done at high temperatures in an oxygen free environment. These precursors are expensive to make and use toxic chemicals to produce, therefore, there is a push to find an environmentally friendly and cost-effective method …

Warren J. Baker Center For Science And Mathematics (Csm)- Fire Protection Analysis, Neal Larsen

Fire Protection Engineering: Culminating Experience Project Reports

Analyzing the fire protection features of the Warren J. Baker Center for Science and Mathematics Building 180, located on Cal Poly Campus in San Luis Obispo California was done using two methods. The prescriptive based analysis of the building focused on the building design, egress, structural fire protection, fire suppression, fire alarm and detection systems to determine if current codes and standards were meet. The performance based analysis discusses certain methods and design fire scenarios that are present within the building and the building’s ability to protect occupants until they can exit safely. The performance based analysis was done using …

"Dual Peaks" Analog Distortion Guitar Effects Pedal, Dave Raul Breuer

Computer Engineering

The Dual Peaks distortion pedal is an analog effects pedal for electric guitar that distorts and boosts the guitar signal in order to achieve tonal characteristics often heard in music genres such as blues, rock, hard rock, and metal. Dual Peaks aims to remedy the current distortion pedal design, and provide a new spin not often provided in the majority of pedals. Dual Peaks contains two separate distortion channels which provide the player with a vast array of distortion and overdrive tones at the press of a switch. Also, Dual Peaks has a "noise gate" and 3-band equalizer circuits built …

The Effect Of Endgame Tablebases On Modern Chess Engines, Christopher D. Peterson

Computer Engineering

Modern chess engines have the ability to augment their evaluation by using massive tables containing billions of positions and their memorized solutions. This report examines the importance of these tables to better understand the circumstances under which they should be used. The analysis conducted in this paper empirically examines differences in size and speed of memorized positions and their impacts on engine strength. Using this technique, situations where memorized tables improve play (and situations where they do not) are discovered.

Simulating The Electrical Properties Of Random Carbon Nanotube Networks Using A Simple Model Based On Percolation Theory, Roberto Abril Valenzuela

Physics

Carbon nanotubes (CNTs) have been subject to extensive research towards their possible applications in the world of nanoelectronics. The interest in carbon nanotubes originates from their unique variety of properties useful in nanoelectronic devices. One key feature of carbon nanotubes is that the chiral angle at which they are rolled determines whether the tube is metallic or semiconducting. Of main interest to this project are devices containing a thin film of randomly arranged carbon nanotubes, known as carbon nanotube networks. The presence of semiconducting tubes in a CNT network can lead to a switching effect when the film is electro-statically …

Second Annual Survey On Narrowleaf Milkweed (Asclepias Fascicularis) And Western Monarch Butterfly (Danaus Plexippus) Populations In Pozo, Ca, Emily Rose Hermann, Francis Villablanca

Biological Sciences

The decline in milkweed (Asclepias spp.) populations across the country, due to factors including agricultural development and herbicide use, has lead to a correlated reduction of monarch butterfly (Danaus plexippus) feeding and breeding habitat. In addition, the intentional planting of non-native milkweed in areas surrounding overwintering habitat has altered Western monarch butterfly migratory behavior, by allowing monarchs to depart from their ancestral migration pattern (timing and location), therefore decreasing the effective population size, and putting monarchs at risk of higher pathogen prevalence, due, in part, to an obligate protozoan parasite that is able to persist on the …

Modular Injection System And Sampling Template (M.I.S.S.T) Design Report, Froylan M. Aguirre

Computer Engineering

Digital systems are ubiquitous throughout modern life and their applications continue to grow. Thus system designers engineer and test modular systems to mitigate error rates. Smaller systems and their increasing importance in many applications demand the utmost reliability. Fault injection is the most common method used by researchers and engineers to test system reliability. However, most hardware fault injection implementations are ad hoc and only used to test a specific system or for specific tests. There is also software-implemented fault injection that adds overhead in the benchmark source code. The aim of this project is to develop a general use, …

Extension Of Cpe 454 Operating System, Joseph Nathaniel Arhar

Computer Science and Software Engineering

This project extended on the operating system I wrote in CPE 454 by adding additional features on top of the existing implementation. In order to implement them, I researched operating system design patterns and hardware details. I used wiki.osdev.org for most research, just like I did in CPE 454. The source code for the project is at https://github.com/josepharhar/jos.

Tectonic Controls On Alluvial Fan Dissection In The El Paso Mountains, Michael Thomas Gaffney

Natural Resources Management and Environmental Sciences

The localized dissection of alluvial fans along the western El Paso Mountains is under question. A relatively minor, south dipping normal fault, previously unmentioned in scientific literature, cuts across Quaternary terraces and alluvial fans in the piedmont of the El Paso Mountains. The linear trend of footwall uplift and the pattern of stream incision into the footwall adjacent to the linear trend of footwall uplift reveal that fan dissection is a result of base level fall caused by ongoing tectonism along the El Paso fault system. The regional importance is discussed as the timing of faulting reveals relatively recent uplift …

Assembling And Characterizing The Efficiency Of An Injection Locked Laser System For Cold Neutral Atom Optical Traps, Alexandra Papa Crawford

Physics

Creating a quantum computer requires a system of particles that can be well-controlled to achieve quantum operations. We need a large array of these particles – called qubits – with long coherence times, which can be initialized, operated on by single and two qubit gates, and read out. For neutral atoms, the qubit states are stable ground states that interact minimally with the environment, leading to long coherence times. Experimentally, the qubits are manipulated using carefully timed laser beam pulses with controlled frequency and intensity, but the outstanding issue for optically trapping cold atoms is finding a light pattern that …

Dynamic Model For Simulating Motion Of The Right Ventricle, Brian Michael Larsen, Sam Koopman Porter, John Francis D'Ambrosio

Mechanical Engineering

This report documents all the research, ideation, and mockups used to determine right ventricle motion and develop a system capable of reproducing that motion on a tissue sample. The model is intended for evaluating anchoring systems being developed by Edwards Lifesciences for use with tricuspid valve therapies. Several design solutions were considered for the primary functions of recreating motion of the right ventricle and attaching tissue to the device. From these ideas a primary means of producing motion and attaching tissue was selected. These ideas were then developed over the course of a school year to become the final system …

Detection Method Of Subclinical Atherosclerosis Of The Carotid Artery With A Hemodynamics Modeling Approach, Marisa Peressini

Master's Theses

Subclinical atherosclerosis is an important area of research to evaluate stroke risk and predict localization of plaque. The current methods for detecting atherosclerosis risk are insufficient because it is based on The Framingham Risk Score and carotid intima media thickness, therefore an engineering detection model based on quantifiable data is needed. Laminar and turbulent flow, dictated by Reynolds number and relative roughness, was modeled through the carotid artery bifurcation to compare shear stress and shear rate. Computer-aided design and fluid flow software were used to model hemodynamics through the carotid artery. Data from the model was derived from governing equations …

Small Scale Intelligent Vehicle Final Design Report, Paul Rothhammer-Ruiz, Dominic Riccoboni, Sarah De Rosier

Mechanical Engineering

No abstract provided.

University Ambassador Tour Structure: Applied With The College Of Agriculture, Food And Environmental Sciences, Haley Rose Warner

Agricultural Education and Communication

College campus tours are an extremely important process to making a selection for where students will attend college. In fact, it has been concluded that campus tours are the most influential part of a students’ college decision (Cohen, 2009). A campus tour allows students to experience aesthetics of the campus environment, community of campus and personal interactions (Okerson, 2016). Although students who participate in a campus tour are twice as likely to attend the university they visited, students do not always choose the university they toured, but do leave with a better understanding about the institution and what they offer …

Lateral Behavior Comparison Of Driven And Screw Piles In Stiff Clay, Sophie Moore

Architectural Engineering

This study is concerned with the comparison of driven and screw piles when exposed to lateral forces and the effects of gapping on stiffness and displacement. Stiffness contributions were determined from force-displacement profiles, gap depth formation curves, strain profiles, bending moment profiles, and P-Y curves. Driven piles were found to be about twice as stiff as screw piles at lower displacements. At larger displacements, the stiffness of the two pile types start to converge. When the piles are in full contact with the soil, stiffness contribution is derived from both the soil and the pile. When gapping is exhibited, the …

Heat Treatment Control Of Residual Stress And Microstructure Of 3d-Printed 316l Stainless Steel, Hajime Yamanaka, Katherine Adelman, Kent Nakano

Materials Engineering

One of the major drawbacks of selective laser melting (SLM) as a form additive manufacturing is that it produces parts with severe residual stress that leads to poor mechanical performance due to the thermal cycling of the printing process. In this project, two different heat treatments (high temperature annealing and low temperature annealing) are applied to 316L stainless steel subsized tensile bars fabricated by SLM process to minimize the amount of residual stress in the samples. Residual stress is indirectly measured by X-ray diffraction (XRD), as well as microscopic analysis, hardness testing, and tensile testing are applied to characterize the …

Next Generation Protocol: Innovating A Resilient Future, Andrew Steven Rudnick, Jamie Cannady, Joe Decesaro, Juan A. Ortiz Salazar

Materials Engineering

Conventional practices do not account for product life beyond end-of-sale – these practices are not sustainable. We have developed an end-of-life protocol that includes a metric that we call the Recovery Rating. The objectives of this Next Generation Protocol, beyond supporting the United Nations’ Sustainable Development Goals, are to encourage the production of goods designed for recovery and to promote the collaboration between consumers, the public, and the private sector to recover goods at their end-of-life. The Recovery Rating that we propose evaluates and quantifies recovery potential of products. The Recovery Rating, which is normed against embodied energy from the …

Calibration And Limitations Of The Mg Ii Line-Based Black Hole Masses, Jong-Hak Woo, Huynh Anh N. Le, Marios Karouzos, Dawoo Park, Daesong Park, Matthew A. Malkan, Tommaso Treu, Vardha Nicola Bennert

Physics

We present single-epoch black hole mass () calibrations based on the rest-frame ultraviolet (UV) and optical measurements of Mg ii 2798 Å and Hβ 4861 Å lines and the active galactic nucleus (AGN) continuum, using a sample of 52 moderate-luminosity AGNs at z ~ 0.4 and z ~ 0.6 with high-quality Keck spectra. We combine this sample with a large number of luminous AGNs from the Sloan Digital Sky Survey to increase the dynamic range for a better comparison of UV and optical velocity and luminosity measurements. With respect to the reference based on the line dispersion of H …

Academic Senate - Agenda, 5/29/2018, Academic Senate

Academic Senate Agendas

No abstract provided.

Executive Committee - Agenda, 5/22/2018, Academic Senate

Academic Senate Agendas

No abstract provided.

Executive Committee - Agenda, 5/15/2018, Academic Senate

Academic Senate Agendas

No abstract provided.

Academic Senate - Meeting Minutes, 5/8/2018, Academic Senate

Academic Senate Minutes

No abstract provided.

Sympatric Serpentine Endemic Monardella (Lamiaceae) Species Maintain Habitat Differences Despite Hybridization, Kathleen M. Kay, Suzie Woolhouse, Brett A. Smith, Nathaniel S. Pope, Nishanta Rajakaruna

Biological Sciences

Ecological differentiation and genetic isolation are thought to be critical in facilitating coexistence between related species, but the relative importance of these phenomena and the interactions between them are not well understood. Here, we examine divergence in abiotic habitat affinity and the extent of hybridization and introgression between two rare species of Monardella (Lamiaceae) that are both restricted to the same serpentine soil exposure in California. Although broadly sympatric, they are found in microhabitats that differ consistently in soil chemistry, slope, rockiness and vegetation. We identify one active hybrid zone at a site with intermediate soil and above-ground characteristics, and …

Graduate Internship Report Aged 539, Frank C. Roche Iii

Agricultural Education: Graduate Internship Reports

This internship and project report includes documentation required in meeting the quality criteria for secondary-level programs of instruction in agriculture. The documents are concurrently used for the Agriculture Incentive Grant review process at Corcoran High School conducted by representatives of the California Department of Education. The supporting material includes information to receive state and local funding, outline the goals and objectives of the program, along with an overview of Corcoran High School, the agriculture program and the community.

Graduate Internship Report- Ceres High School, Mardel Runnels

Agricultural Education: Graduate Internship Reports

This Graduate Internship Report is based on an internship of teaching at Ceres High School and advising the Ceres FFA Chapter. The candidate examined and investigated the program according to the twelve Quality Criteria for Agricultural Education in the State of California. The report includes reflections and supporting documents that evaluate the quality of the Agriculture program and determine its eligibility for the Agriculture Incentive Grant funds. In addition, it demonstrates the process of creating a Comprehensive Program Plan for the Ceres High School Agriculture Program as part of the internship.

Graduate Internship Report- Salinas High School, Rachel Nicole Martinez

Agricultural Education: Graduate Internship Reports

This AgEd 539 Graduate Internship report includes validation documents required in meeting the quality criteria for secondary-level programs of instruction in agriculture. The documents are currently used for the Agriculture Incentive Grant review process at Salinas High School.The internship project includes the creation of an Agriculture Advisory Committee for Salinas High School. The included information and supporting materials are required to received local and state funding. An overview of the Salinas High School Program can be found in the Comprehensive Program Plan that is included in this document.