Digital Commons Network^™

Pulsed Electrical Field Ablation Modulation, Camille Lousie Dozois, Jason Tyler Arias, Courtnee Lin Madsen

Biomedical Engineering

This document comprises the steps taken by the senior project team to create a Proof-of-Concept Review for a Variable Pulsed Electric Field Ablation Catheter. First, the team did a significant amount of background research on related literature to better understand the current status of the project topic. After sufficient background information was obtained, project objectives and deliverables were finalized. Once customer requirements and the indications for use were completed, engineering specifications for the product and project were documented. All key customer requirements and engineering specs were related to the variable pulse functionality, maneuverability, as well as overall dimensioning of the …

Cal Poly Associated General Contractors Service- Learning Project In San Ignacio, Belize, Will A. Myers

Construction Management

In the winter of 2020, the Cal Poly Associated general Contractors chapter of San Luis Obispo built over 200 linear feet of soccer seating for the community of Selena, just outside of San Ignacio, Belize. Our team fundraised over $18,000 and designed a soccer stadium that would leave a lasting impact on the community. Throughout all phases of the project, we were challenged with many obstacles that tested our ability to overcome and handle difficult situations.

Belize Service Learning: A Case Study In Construction Technology Abroad, Parker H. Doshier

Construction Management

In Winter of 2019, members of the Associated General Contractors, Student Chapter at Cal Poly traveled to Selena, Belize to complete soccer bleachers at the local soccer field. This trip offered an excellent case study into feasibility and benefits of new construction technology on all project sizes and in different countries. SketchUp was used in multiple phases of this project including design, estimating and the creation of as-builts. Procore offers an array of useful features including the scheduling, daily logs and meetings that were used on this project. The scheduling feature was useful in tracking travel deadlines and for monitoring …

A Case Study On The Financial Implications Of The Zero Net Energy (Zne) Goal In California, Shane A. Willingham

Construction Management

This paper is a case study that identifies potential financial implications from the updated Title 24, Part 6 code requirements established in 2019 by the California Energy Commission (CEC). The CEC works closely with the California Public Utilities Commission (CPUC), who’s long term goal is to make all residential structures Zero Net Energy (ZNE) throughout the state. The CEC’s updated code requirements include mandatory measures for detached residential homes to meet Zero Net Electricity on an Energy Design Rating (EDR) basis, a step towards Zero Net Energy. The purpose of this study is to understand the additional construction costs associated …

Increasing Health And Safety Through The Utilization Of 4d Modeling, Rogan J. Wells

Construction Management

Health and safety is one of the most important aspects of the construction industry. Every year there are thousands of work-related injuries in the construction industry. Avoiding these injuries is of the utmost importance on a jobsite. This paper will analyze how building information modeling, specifically the use of 4D building information modeling, can be utilized to increase the overall health and safety of construction jobsite. An exploratory survey was conducted amongst architecture, engineering, and construction industry professionals who hold a wide range of experience. The aim of this survey was to analyze their knowledge and experiences using building information …

As-890-20 Resolution On Class Attendance, Jerusha Greenwood, Ashlee Hernandez, Alan Faz, Tess Loarie, Kylie Clark

Academic Senate Resolutions

That the wording in Class Attendance policy be changed as follows: It is strongly urged that instructors accept the following “excusable” reasons for allowing students to make up missed work. And, be it further RESOLVED that the following clarifying language be added to the policy as excusable reasons for making up missed class work: B. Injury, illness, death, or any extenuating circumstances of close relatives (to include but not limited to natural, adopted, and/or in-law children, parents, legal guardian, siblings, grandparents, grandchildren as well as spouse or partner). Extenuating circumstances can be defined as serious and exceptional factors outside the …

Llama: The MBh–Σ⋆ Relation Of The Most Luminous Local Agns, Turgay Caglar, Leonard Burtscher, Bernhard Brandl, Jarle Brinchmann, Richard I. Davies, Erin K. S. Hicks, Michael Koss, Ming-Yi Lin, Witold Maciejewski, Francisco MüLler-Sánchez, Rogemar A. Riffel, Rogério Riffel, David J. Rosario, Marc Schartmann, Allan Schnorr-MüLler, T. Taro Shimizu, Thaisa Storchi-Bergmann, Sylvain Veilleux, Gilles Orban De Xivry, Vardha N. Bennert

Physics

Context. The MBH–σ_⋆ relation is considered a result of coevolution between the host galaxies and their supermassive black holes. For elliptical bulge hosting inactive galaxies, this relation is well established, but there is still discussion concerning whether active galaxies follow the same relation.

Aims. In this paper, we estimate black hole masses for a sample of 19 local luminous active galactic nuclei (AGNs; LLAMA) to test their location on the MBH–σ_⋆ relation. In addition, we test how robustly we can determine the stellar velocity dispersion in the presence of an AGN continuum and AGN emission lines, …

Executive Committee - Agenda, 2/18/2020, Academic Senate

Academic Senate Agendas

No abstract provided.

Automating Deep-Sea Video Annotation Using Machine Learning, Hanson Egbert, Lubomir Stanchev, Benjamin Ruttenberg

Computer Science and Software Engineering

As the world explores opportunities to develop offshore renewable energy capacity, there will be a growing need for pre-construction biological surveys and post-construction monitoring in the challenging marine environment. Underwater video is a powerful tool to facilitate such surveys, but the interpretation of the imagery is costly and time-consuming. Emerging technologies have improved automated analysis of underwater video, but these technologies are not yet accurate or accessible enough for widespread adoption in the scientific community or industries that might benefit from these tools. To address these challenges, we developed a website that allows us to: (1) Quickly play and annotate …

Timber-Strong Design Build Competition, Anna Luehrs, Lilliann Lai, Dolores Herrera, John Leone

Architectural Engineering

The November 2019 Timber-Strong Design Build Competition, hosted by National Council of Structural Engineers Association (NCSEA), was developed by the American Wood Council (AWC), Simpson Strong-Tie Company Inc. (SST), and APA - The Engineered Wood Association (APA) to cultivate timber design, building, and sustainability experience for students. Participating students gained exposure to performance analysis, construction management, building practices, and project bid preparation while practicing as a design construction firm. In the process of this hands-on experience, students were expected to procure all building materials and tools themselves with some aid from sponsors. The goal of the competition was to provide …

Academic Senate - Agenda, 1/28/2020, Academic Senate

Academic Senate Agendas

No abstract provided.

Academic Senate - Meeting Minutes, 1/14/2020, Academic Senate

Academic Senate Minutes

No abstract provided.

Flight Test Instrumentation For Drag Measurement Using Iot Devices, Bennett Diamond, Wyll Soll, William Busby, Danny Maas, Adam Waldemarson, William Bergman, Austin Conrad, Zachary Yamauchi

Baker/Koob Endowments Awarded Projects

A wing drag measuring device known as a drag rake was conceived, built, and tested to support the flight test of the Nixus Sailplane project. This device improved upon existing drag rake designs by incorporating a self-contained microcontroller that logged drag rake data and broadcast that data wirelessly to a WiFi equipped smart device in real time. By being entirely wireless, the drag rake can be quickly mounted to any aircraft and does not have any wires that must run long distance to the cockpit affecting the aircraft’s aerodynamics. After the end date of the grant, the completed drag rakes …

The Optimum Design Of A Vacuum-Compatible Manipulator To Calibrate Space Based Ultraviolet Imagers, Jason L. Grillo

Master's Theses

Recent discoveries in geospace science have necessitated the design of compact UV imaging instruments to make space-based observations from multiple vantage points. The miniaturized ultraviolet imager (MUVI) instrument from the Space Sciences Laboratory (SSL) at UC Berkeley is under development to facilitate such discoveries on a wider scale. This thesis documents the design, integration, and characterization of a vacuum compatible manipulator to calibrate the MUVI instrument inside the UV thermal vacuum chamber at SSL. Precision linear and rotation stages were implemented with custom mounting plates to achieve four degrees of freedom. Optical components were installed to imitate the MUVI instrument …

Human Path Prediction Using Auto Encoder Lstms And Single Temporal Encoders, Hayden Hudgins

Master's Theses

Due to automation, the world is changing at a rapid pace. Autonomous agents have become more common over the last several years and, as a result, have created a need for improved software to back them up. The most important aspect of this greater software is path prediction, as robots need to be able to decide where to move in the future. In order to accomplish this, a robot must know how to avoid humans, putting frame prediction at the core of many modern day solutions. A popular way to solve this complex problem of frame prediction is Auto Encoder …

Volumetric Flow Measurement For Irrigation District Turnouts, Charles M. Burt, Daniel J. Howes, Stuart Styles

BioResource and Agricultural Engineering

Technical assistance related to irrigation district turnout flow/volumetric measurement is provided by ITRC on behalf of California Dept. of Water Resources, USBR, and BIA irrigation projects. Throughout that work, it was apparent there was a need to organize well-established information as well as to provide new insights into irrigation flow measurement. The target audiences are irrigation districts and others who want to improve measurement accuracy for irrigation flow rates and volumetric deliveries to meet regulations, improve the efficiency of ditchriders (system operators), and provide equity and transparency to farmers and managers. The focus of this publication is on turnouts (deliveries) …

Can Oral Contraceptives Increase Antibiotic Resistance In Escherichia Coli?, Allison Helene Clatch, Leah Van Otterloo

Baker/Koob Endowments Awarded Projects

Antibiotic resistance is one of the most pressing threats to public health. Intrinsic resistance to many antimicrobials in Gram-negative bacteria is accomplished by naturally occurring efflux pumps. Efflux pumps are transmembrane proteins that can extrude antimicrobials from bacterial cytoplasm. Efflux pumps recognize a wide range of compounds including antibiotics, antiseptics, pesticides, and hormones. The upregulation of efflux pump genes in response to increasing concentrations of substrates has shown to increase resistance to toxic substrates. We hypothesize that efflux pump substrates other than antimicrobials, such as steroid hormones, will also induce the expression of efflux pump genes and consequently increase resistance …

A Transfer Students Guide To Becoming A Pca, Zack J. Krueger

Agricultural Education and Communication

A transfer students guide to becoming a PCA through the AGED department as opposed to AEPS. Agricultural science majors. Classes shown and listed cooperate with the California Department of Pesticide Regulations required course list necessary to take the Pest Control Advisers exam.

A Comparison Of The Army Corps Of Engineers Hydrologic Modeling System And Autodesk Storm And Sanitary Analysis For Hydraulic And Hydrologic Analysis And Design, Foster Josef Heifetz Campbell

Master's Theses

Hydrological and hydraulic effects of urban development is one of the key issues of study for improved water management. The addition of impervious surfaces to once pervious land and re-routing open channels and flow paths can cause flooding or declining water levels within a watershed. Many studies of these issues have found that there can be multiple factors causing hydrological and hydraulic impacts, and it can be hard to analyze and develop effective solutions without appropriate drainage software packages. However, there are multiple software packages available for use, and determining the correct one to use for a specific challenge can …

Development Of An Analysis Tool And Weight Estimation Method For Aircraft Wing Structures, Kevin M. Barton

Master's Theses

The goal of this effort was to build an analysis tool for aircraft wings and incorporate it into a program that optimizes the wing structure for the lowest weight for the conceptual design phase. The analysis tool calculates the internal stresses in primary load carrying members using established analysis methods for semimonocoque beams. Via a Graphical User Interface (GUI) built in MATLAB, the user can define the structural layout and material properties of the load carrying members. The program requires a degenerate geometry model built with Vehicle Sketch Pad (OpenVSP) to define the outer mold line (OML) of the wing, …

Design, Modeling And Control Of A Two-Wheel Balancing Robot Driven By Bldc Motors, Charles T. Refvem

Master's Theses

The focus of this document is on the design, modeling, and control of a self-balancing two wheel robot, hereafter referred to as the balance bot, driven by independent brushless DC (BLDC) motors. The balance bot frame is composed of stacked layers allowing a lightweight, modular, and rigid mechanical design. The robot is actuated by a pair of brushless DC motors equipped with Hall effect sensors and encoders allowing determination of the angle and angular velocity of each wheel. Absolute orientation measurement is accomplished using a full 9-axis IMU consisting of a 3-axis gyroscope, a 3-axis accelerometer, and a 3-axis magnetometer. …

Mechanized Advent Calendar, Oma Skyrus, Sigrid Derickson, Tyler Koski, Daniel Clifton

Mechanical Engineering

Within this document, the “Naughty and Nice” team will describe the details associated with the completion of this project, which involves creating an animated advent calendar for the Cambria Christmas Market. The problem, the customers and stakeholders, and the general goals of the project are introduced. The team conducted background research; how this research helps in finding a solution or supporting the needs of the sponsor is illustrated. Initial research includes interviews with the sponsor and potential users, patent and existing product searches, and some technical research pertaining to the subject. The team found that there are not many existing …

Blood Glucose Predictor, Jessica Patterson

Electrical Engineering

For my senior project, I perform data analysis using statistical methods to determine body metrics that correlate with blood glucose levels. Working with Dr. Tina Smilkstein, I take repeat measurements from 6 different volunteers to establish trends in bodily metric data. The data taken includes weight, body fat, pulse rate, VO2, blood glucose, blood pressure, hours slept, and quality of sleep. Using these values, I use the program MiniTab to view results.

A few examples of correlations with blood glucose found in this project are:

• Systolic blood pressure for females had a regression line of 124.0 -0.3366*Blood Pressure. This indicates …

Reasoning From Point Clouds, Joey Wilson

Computer Engineering

Over the past two years, 3D object detection has been a major area of focus across industry and academia. This is primarily due to the difficulty of learning data from point clouds. While camera images are fixed size and can therefore be easily trained on using convolution, point clouds are unstructured series of points in three dimensions. Therefore, there is no fixed number of features, or a structure to run convolution on. Instead, researchers have developed many ways of attempting to learn from this data, however there is no clear consensus on what is the best method, as each has …

Mobile Robot Platform, Sukhman S. Marok

Electrical Engineering

The Mobile Robot Platform is a research and development tool designed for researchers working in the field of robotics. The cost of existing mobile robot platforms can easily be in the thousands of dollars, leading many researchers to choose between spending the time to create their own platform or buying an expensive pre-existing solution. The Mobile Robot Platform proposed combines pre-existing open source software and hardware solutions, along with a strong mechanical base that is capable of navigating on flat surfaces. The robot is designed to have many of the necessary components needed for teleoperation as well as autonomous navigation. …

Free Space Optical Communication, Anuj Gohil

Electrical Engineering

Communication is key to day to day activities for all companies and people. Wireless communication has made us expect more from our tools. Radio Frequency has been the preferred medium for a couple decades, but there is a need for faster secure communication. Free Space Optical Communication is an alternate wireless communication system which uses optics to create a link. It utilizes low-power and converts an analog signal into digital pulses which are transmitted across space to a receiver. Its only caveat is its vulnerability under atmospheric obstacles. The goal of this project is to create a free space optical …

Pv Mppt Water Pump Controller, Jacob R. Lamkin

Electrical Engineering

The intention of this project is to create a low cost way to extract the maximum useful power from a PV module to power a water pump. This approach will yield maximum financial and technical accessibility for end users. The project was successful in powering a water pump from a PV module as desired, and the microcontroller driven control circuitry was capable of finding and maintaining operation at the maximum power point of the PV module. Due to the low performance of the buck converter used in this project, this approach was not as efficient as desired and would require …

Waste Gasification, Glyn D. Lewis, Nash Taylor, Nicholas L. Ordonez, David S. Mccallum

Mechanical Engineering

This document summarizes the work the IGT Team has conducted on the topic of waste to energy gasification over the Cal Poly Winter, Spring, and Fall quarters of 2019. The project is being carried out by four Cal Poly Mechanical Engineering students: Nash Taylor, Glyn Lewis, David McCallum, and Nicholas Ordonez and the sponsor of this project is Tod duBois. The team’s original goal was to successfully create a system that compiles residential solid waste on a small scale, gasifies it, and measures the typical syngas outputs, so that the team may assess the viability of gasification of household waste …

Deployable Cover For Cubesat Fuv Imager, Edwin J. Rainville, Patrick J. Rainville, Jeff Wagner

Mechanical Engineering

The goal is to develop a deployable cover for a far ultraviolet imager cube satellite that will be used to map the earth’s auroras in the ionosphere. The deployable cover is used to protect the Far Ultra-Violet (FUV) sensor and lenses, house two mirrors which are used to filter unwanted light and expose optics when deployed. The deployable cover consists of a door, an actuator, a lockout mechanism, and an “open position” indicator. This project also includes designing a fixture for testing the optical alignment of the deployable cover after launch and during orbital conditions. The subassembly is required to …

Model Block Press Design, Ben Todd Van Hamersveld, Chester Wong, Alexander Wing-Jon Giannousis

Mechanical Engineering

This project’s goal is to redesign the Center for Vocational Building Technology (CVBT) BP9 earth block press, which makes 1/3 scale compressed earth blocks to build demonstration model homes in Thailand. The full-scale block press, the BP6, provides a sustainable and affordable technique for constructing habitable homes in Thailand. The BP9 serves as a tool to inform the public of the advantages of human-powered earth block presses through demonstration. The BP9 press design has multiple problems: it is too expensive to manufacture, there is too much friction when used, it has several weak points due to users unintentionally applying excessive …