Digital Commons Network^™

Solar Energy In Relation To Structural Engineering, Rachel Keith

Architectural Engineering

Solar power is increasingly popular among households around the world. However, many people may not understand how solar modules work, system design, factors that affect efficiency, or options for integrating a residential solar system with the existing power grid. This paper addresses all of these.

Earthquake Engineering Research Institute 2021 Undergraduate Seismic Design Competition, Tomlinn Cox

Architectural Engineering

Since 2004, the Earthquake Engineering Research Institute (EERI) has hosted the undergraduate Seismic Design Competition to promote the study of earthquake engineering. This year, a team of students from the California Polytechnic State University, San Luis Obispo competed against 36 other colleges and universities from across the world in the 19^th annual competition, virtual for the first time due to the COVID-19 pandemic. This report summarizes and expands on the material prepared by the 2021 team to guide the exploration of the implementation of an addition to an existing hospital that needs retrofitting. This includes the potential design sequence …

Design And Construction Of Modular Concrete Footings And Testing Assembly For Use In Cal Poly's High Bay Laboratory, Thomas Little, Anders Johnson

Architectural Engineering

The purpose of this project was to improve the testing capabilities of the ARCE High Bay lab by designing and fabricating a pair of modular concrete footings along with a reusable testing frame capable of testing full-scale steel moment connections.

Selection Of Overwintering Microclimate By Migratory Western Monarch Butterflies, Kiana Saniee

Master's Theses

Migratory species are expected to demonstrate habitat selection that occurs at multiple spatial and temporal scales. Western monarch butterflies migrate seasonally to overwinter in groves at geographically predictable locations along the California coast. To date, overwintering habitat selection by western monarch butterflies has been studied assuming that habitat selection occurs where overwintering aggregations form, meaning at the spatial scale where monarchs form dense overwintering aggregations within overwintering groves. We argue that since western monarch butterflies are migratory, studies of habitat selection could have commingled selection at different scales into a single spatial scale. This likely leads to ignoring some levels …

Journeyman International: Dwell Being Jonestown, Mississippi, Autumn Wagner

Architectural Engineering

Journeyman International is a non-profit organization that works with countries all over the world to support humanitarian projects by pairing clients with design professionals and volunteers to oversee the design and construction of projects. This specific project partners with Third Lens Ministries and But God Ministries, two organizations that are hoping to empower the community in Jonestown, Mississippi. Dwell Being promotes sustainability and affordable housing in a new housing community in Jonestown that is designed for healthy living and community interaction. Jonestown is a very small 0.4 square acre town that has roots in systemic racism and oppression. A once …

Tensegrity, Experimentation In The Removal Of Compression Stability Elements, William R. Adam, Ivan E. Cruz, Jose Hernandez, Joe Kasey Tatis-Flanagan, Truman J. Waller

Architectural Engineering

Tensegrity strives to create an impossible floating structure. To achieve this mark, cables are used to suspend the pavilion mid-air which creates an axial stress governed system. Within this axial force design constraint, a 3D space truss becomes the form. This structure pays homage to famous structural designers of the past such as Santiago Calatrava and Kenneth Snelson. Similar to these artists, tensile elements are at the forefront of the design. To accomodate the user, we have provided a sitting space nestled in the center of system. This is intended for visitors first to be puzzled by the seemingly discontinuous …

Hand Strength And Dexterity Enhancer, Julia Ann Denison, Autumn B. Rexford, Melissa A. Kurani, Christina K. Fong

Biomedical Engineering

Good Grips created the hand strength and dexterity enhancer project to meet the challenge presented by Bill Phelps. He has Inclusion Body Myositis (IBM), an inflammatory muscle disease characterized by progressive muscle weakness and atrophy. Bill has limited strength in both hands and lost the ability to bend his fingers, making it difficult to grip anything. He needed a device that would help with everyday tasks such as writing, lifting, and holding various objects.

Our team consists of four engineering students attending Cal Poly, San Luis Obispo. We researched, designed, manufactured, and tested a device that would fulfill the problem …

Automatic Tourniquet For Military Emergencies, Arshia Nazerani Houshmand, Marina Felt, Blake Juett

Biomedical Engineering

This document contains the progress and development of an automated tourniquet that would be intended for use within the United States military. The project was student-led and sponsored. Coordination and confirmation of our device was provided by Dr. John F. Kragh, who is part of the U.S. Army Institute of Surgical Research. The document will outline the research conducted on tourniquets, specification development of the tourniquet, morphology process, and final design production of the automatic tourniquet.

Emotional Intelligence Development Program For Designers, Chloe Heinz

Graphic Communication

What sets great designers apart from the rest is their ability to empathize with the user they’re designing for. Formal education doesn’t teach the soft skills that help a designer effectively communicate with the client and connect with the user. To bridge this educational gap, I designed a piece of interactive instructional media in the form of a customizable emotional intelligence development program to enhance designers’ self- awareness, emotional regulation, motivation, empathy, and social skills. This program is based upon the intentional change theory by Richard Boyatzis, so the program duration is left up to the program user to meet …

Effect Of Dissolved Oxygen On Corrosion Of Carbon And 13cr Steel In A Brine Environment, Kevin Peter Iu, Andy Zhou

Materials Engineering

Oxygen corrosion is a major threat to seawater injection systems that are part of offshore drilling operations. Seawater is typically deoxygenated to an industry standard of(DO) by injection through a deaeration column followed by treatment with oxygen scavenging chemicals. Commercial simulation software like OLI Studio: Corrosion Analyzer predicts high corrosion rates when injection seawater contains high DO levels, justifying deoxygenation. However, a notable lack of experimental data exists concerning the effect of varying levels of dissolved oxygen on corrosion rate. The goal of this project is to measure the effect of three dissolved oxygen levels (0, 62, and 620 ppb) …

Uv Polymerization Of A Zwitterionic Antifouling Membrane Coating, Amanda Jia-Hwa Tsai, Vincent Matthew Guarino

Materials Engineering

Membrane filtration is used in a wide array of industries to separate components in a mixture. Filtration membranes suffer from the external deposition of pollutants and microorganisms, a phenomenon known as fouling. Fouling reduces the lifetime of a membrane and therefore increases production costs. The goal of this project was to modify the surface of a hydrophobic commercial membrane with a charged coating to induce antifouling properties. A zwitterionic monomer, sulfobetaine methacrylate (SBMA), was used for its steric hindrance and hydration shell formation mechanisms, which result in superior non-specific antifouling performance. When polymerizing the coating onto the surface of the …

Development Of A Marine Biodegradable Target Balloon, Blake Samuel Robinson, Arash Sam Akhavi, David Leonardo Albarran-Martinez

Materials Engineering

The US Navy utilizes PVC target balloons, known as Killer Tomatoes, that are inflated onboard a naval vessel then deployed into the ocean to calibrate a variety of weaponry. The Navy has requested the investigation of biodegradable polymers to replace the PVC in attempts to reduce ocean waste that is generated from the leftover PVC material. After communicating with American Pacific Plastic Fabricators (APPF), the current manufacturer of the Killer Tomatoes, we gained an understanding of the manufacturing process and the material requirements that would allow a new material to be integrated into their current process. Two proprietary, trial polymers …

Inventory Locating With Quuppa: The Design And Development Of A Real-Time Process Monitoring Web Application Solution, Dylan C. Moreland, Trevor J. Howell, John W. Takiff, Patrick S. Dillon, Theo E. Fritz, William K. Mcintyre

Industrial and Manufacturing Engineering

Viasat, Inc. requires precise inventory tracking at their production facility in San Diego, CA. Viasat has installed the Quuppa indoor real-time locating system (RTLS), which it uses to track the real-time position of high-value work-in-process items. In its current state, the system only displays in-the-moment location information, with no available functionality for storing historical data for review, analysis, or visualization. In addition, the data displayed is noisy and prone to significant random error. This paper provides an overview of RTLS methods and technologies, assesses alternative solutions to Viasat’s issue, demonstrates our RTLS integrated web app solution, analyzes its impact, and …

Pressure Driven Desalination Membranes: Lyotropic Liquid Crystals Containing Single Walled Carbon, Matteo A. Del Giudice, Samantha Castillo Merigold

Materials Engineering

This project presents a potential alternative desalination technique that utilizes the ion rejection properties of single walled carbon nanotubes dispersed in a lyotropic liquid crystal (LLC) matrix. Previous research has pointed to the polymerizable surfactant methacryloxy ethyl hexadecyl dimethyl ammonium bromide (C16MA) having capabilities of filtering molecular components smaller than a nanometer, when oriented in cylindrical micelles. SWCNTs were dispersed in deionized water by probe sonication and addition of surfactant cetyltrimethylammonium bromide (CTAB) due to SWCNTs’ hydrophobic properties. Membranes were produced containing 55wt% C16MA, 37wt% DI water, 0.1wt% with respect to the monomer (WRM) SWCNTs, 1.9 wt% WRM 2,2-dimethoxy-2-phenylacetophenone (photointiator), …

Assessing Bear: Tool Usability For Wireless Ctf, Donald S. Sanchez Jr.

Master's Theses

Capture the Flag (CTF) is a common and popular type of event in the cyber security space with audiences ranging from large security conference participants to even those in middle or high school. Event participants bring their favorite set of tools and any level of knowledge they have to compete against other teams in solving cyber security related challenges. These types of challenges can range anywhere from reverse engineering programs and hacking WiFi to utilizing interesting command line commands and messing with browser developer consoles. There are plenty of general CTF events that happen throughout every month, as well as …

Connected Vehicle Co-Simulation For Autonomous Vehicles In Airsim Using Ns-3, Alexandra Garro

Master's Theses

Vehicle-to-everything (V2X) communications enables vehicles to communicate directly with each other, as well as roadside infrastructure. Vehicle-to-vehicle (V2V) communication, a subset of V2X communication, enables the vehicle to not solely rely on on-board sensors and allows the vehicle to share information directly to any nearby vehicles. Information shared between vehicles may include a vehicle's position, velocity, and direction, as well as other data. As these are safety-critical applications, rigorous security assessments are needed, yet it can be very expensive, dangerous, and complex to test security vulnerabilities of autonomous vehicles. Therefore, we aim to leverage realistic open-sourced simulators to carry out …

Automating Deep-Sea Video Annotation, Hanson Egbert

Master's Theses

As the world explores opportunities to develop offshore renewable energy capacity, there will be a growing need for pre-construction biological surveys and post-construction monitoring in the challenging marine environment. Underwater video is a powerful tool to facilitate such surveys, but the interpretation of the imagery is costly and time-consuming. Emerging technologies have improved automated analysis of underwater video, but these technologies are not yet accurate or accessible enough for widespread adoption in the scientific community or industries that might benefit from these tools.

To address these challenges, prior research developed a website that allows to: (1) Quickly play and annotate …

Simulation Of A Configurable Hybrid Aircraft, Brandon Bartlett

Master's Theses

As the demand for air transportation is projected to increase, the environmental impacts produced by air travel will also increase. In order to counter the environmental impacts while also meeting the demand for air travel, there are goals and research initiatives that aim to develop more efficient aircraft. An emerging technology that supports these goals is the application of hybrid propulsion to aircraft, but there is a challenge in effectively exploring the performance of hybrid aircraft due to the time and money required for safe flight testing and due to the diverse design space of hybrid architectures and components. Therefore, …

Journeyman International: Haiti Hac Innovation Center In Croix Des Bouquets, Brent K. Underwood

Construction Management

The purpose of this project was to create and provide the necessary pre-construction documents for a multi-purpose building in Croix des Bouquets, Haiti. This project aims to give occupants a new space to work freely in as it will be equipped with the essential needs. The rooms to be included within this building are offices, meeting rooms, general spaces, a workshop and computer lab – all of which will give the occupants the ability to work in an innovative environment. The project is overseen by three organizations. These groups are Journeyman International (JI), the Haitian American Caucus (HAC), and Third …

Dependencyvis: Helping Developers Visualize Software Dependency Information, Nathan Lui

Master's Theses

The use of dependencies have been increasing in popularity over the past decade, especially as package managers such as JavaScript's npm has made getting these packages a simple command to run. However, while incidents such as the left-pad incident has increased awareness of how vulnerable relying on these packages are, there is still some work to be done when it comes to getting developers to take the extra research step to determine if a package is up to standards. Finding metrics of different packages and comparing them is always a difficult and time consuming task, especially since potential vulnerabilities are …

Applying Facial Emotion Recognition To Usability Evaluations To Reduce Analysis Time, Gavin Kam Chao

Master's Theses

Usability testing is an important part of product design that offers developers insight into a product’s ability to help users achieve their goals. Despite the usefulness of usability testing, human usability evaluations are costly and time-intensive processes. Developing methods to reduce the time and costs of usability evaluations is important for organizations to improve the usability of their products without expensive investments. One prospective solution to this is the application of facial emotion recognition to automate the collection of qualitative metrics normally identified by human usability evaluators.

In this paper, facial emotion recognition (FER) was applied to mock usability recordings …

The Ill-Treatment Of Their Countrywoman: Liberated African Women, Violence, And Power In Tortola, 1807–1834, Arianna Browne

Master's Theses

In 1807, Parliament passed an Act to abolish the slave trade, leading to the Royal Navy’s campaign of policing international waters and seizing ships suspected of illegal trading. As the Royal Navy captured slave ships as prizes of war and condemned enslaved Africans to Vice-Admiralty courts, formerly enslaved Africans became “captured negroes” or “liberated Africans,” making the subjects in the British colonies. This work, which takes a microhistorical approach to investigate the everyday experiences of liberated Africans in Tortola during the early nineteenth century, focuses on the violent conditions of liberated African women, demonstrating that abolition consisted of violent contradictions …

Comparison Of Hilbert Transform And Derivative Methods For Converting Ecg Data Into Cardioid Plots To Detect Heart Abnormalities, Robert George Goldie

Master's Theses

Electrocardiogram (ECG) time-domain signals contain important information about the heart. Several techniques have been proposed for creating a two-dimensional visualization of an ECG, called a Cardioid, that can be used to detect heart abnormalities with computer algorithms. The derivative method is the prevailing technique, which is popular for its low complexity, but it can introduce distortion into the Cardioid plot without additional signal processing. The Hilbert transform is an alternative method which has unity gain and phase shifts the ECG signal by 90 degrees to create the Cardioid plot. However, the Hilbert transform is seldom used and has historically been …

An Analysis Of Real-Time Ray Tracing Techniques Using The Vulkan® Explicit Api, Elleis C. Souza

Master's Theses

In computer graphics applications, the choice and implementation of a rendering technique is crucial when targeting real-time performance. Traditionally, rasterization-based approaches have dominated the real-time sector. Other algorithms were simply too slow to compete on consumer graphics hardware. With the addition of hardware support for ray-intersection calculations on modern GPUs, hybrid ray tracing/rasterization and purely ray tracing approaches have become possible in real-time as well. Industry real-time graphics applications, namely games, have been exploring these different rendering techniques with great levels of success. The addition of ray tracing into the graphics developer’s toolkit has without a doubt increased what level …

Evaluation Of Blood Vessel Mimic Scaffold Biocompatibility, Nicole M. Abraham

Master's Theses

The Tissue Engineering Research Lab at California Polytechnic State University, San Luis Obispo focuses on creating tissue-engineered blood vessel mimics (BVMs) for use in preclinical testing of vascular devices. These BVMs are composed of electrospun scaffolds made of an assortment of polymers that are seeded with different cell types. This integration of polymers with cells leads to the need for biocompatibility testing of the polymer scaffolds. Many of the lab’s newest scaffolds have not been fully characterized for biologic interactions. Therefore, the first aim of this thesis developed methods for in vitro cytotoxicity testing of polymers used in the fabrication …

Transfer Learning Approach To Powder Bed Fusion Additive Manufacturing Defect Detection, Michael Wu

Master's Theses

Laser powder bed fusion (LPBF) remains a predominately open-loop additive manufacturing process with minimal in-situ quality and process control. Some machines feature optical monitoring systems but lack automated analytical capabilities for real-time defect detection. Recent advances in machine learning (ML) and convolutional neural networks (CNN) present compelling solutions to analyze images in real-time and to develop in-situ monitoring.

Approximately 30,000 selective laser melting (SLM) build images from 31 previous builds are gathered and labeled as either “okay” or “defect”. Then, 14 open-sourced CNN were trained using transfer learning to classify the SLM build images. These models were evaluated by F1 …

The Application Of Post-Hoc Correction Methods For Soft Tissue Artifact And Marker Misplacement In Youth Gait Knee Kinematics, Kaila L. Lawson

Master's Theses

Biomechanics research investigating the knee kinematics of youth participants is very limited. The most accurate method of measuring knee kinematics utilizes invasive procedures such as bone pins. However, various experimental techniques have improved the accuracy of gait kinematic analyses using minimally invasive methods. In this study, gait trials were conducted with two participants between the ages of 11 and 13 to obtain the knee flexion-extension (FE), adduction-abduction (AA) and internal-external (IE) rotation angles of the right knee. The objectives of this study were to (1) conduct pilot experiments with youth participants to test whether any adjustments were necessary in the …

Soarnet, Deep Learning Thermal Detection For Free Flight, Jake T. Tallman

Master's Theses

Thermals are regions of rising hot air formed on the ground through the warming of the surface by the sun. Thermals are commonly used by birds and glider pilots to extend flight duration, increase cross-country distance, and conserve energy. This kind of powerless flight using natural sources of lift is called soaring. Once a thermal is encountered, the pilot flies in circles to keep within the thermal, so gaining altitude before flying off to the next thermal and towards the destination. A single thermal can net a pilot thousands of feet of elevation gain, however estimating thermal locations is not …

Expanding Housing Typology, Increasing Affordability: A Flexible Density Program For The City Of San Luis Obispo, Graham J. Bultema

Master's Theses

The City of San Luis Obispo faces an ongoing housing production shortage and housing affordability crisis that has been afflicting jurisdictions across State of California for a prolonged period of time. The City faces many of the same housing availability and affordability challenges as the rest of the State, but also has distinct characteristics that necessitate unique policies and strategies, such as the concurrent presence of both a large student and young professional population as well as a wealthy retirement community, which drastically drives up housing prices and demand.

The Flexible Density Program is proposed by the City of San …

Modeling The Spread Of Covid-19 Over Varied Contact Networks, Ryan L. Solorzano

Master's Theses

When attempting to mitigate the spread of an epidemic without the use of a vaccine, many measures may be made to dampen the spread of the disease such as physically distancing and wearing masks. The implementation of an effective test and quarantine strategy on a population has the potential to make a large impact on the spread of the disease as well. Testing and quarantining strategies become difficult when a portion of the population are asymptomatic spreaders of the disease. Additionally, a study has shown that randomly testing a portion of a population for asymptomatic individuals makes a small impact …