Digital Commons Network^™

Framework For Multi-Agent Coordination And Distributed Localization In Micro-Uavs, Minwoo Park, Nikolas Tambornini

Electrical Engineering

Micro-UAVs (unmanned aerial vehicles) due to their inexpensive nature and compact form factor have shown an increase in prevalence throughout a multitude of applications including, but not limited to: search and rescue, military reconnaissance, and agriculture monitoring. However, for a majority of these high impact applications, a swarm of micro-UAVs are required and furthermore mandate that they are able to cooperatively and autonomously coordinate with each other. For long, controlling and communicating between a user and a singular micro-UAV has been a well known and solved problem, however the same can't be said for swarms of micro-UAVs. This project seeks …

Digital Drone Arrays: Two-Tone Communication, Armin Behbahani, Alejandro Martin Cosper, Landon Leroy John Foster, Mont Ziadoon Murad

Electrical Engineering

Over the last few years, there has been great interest in distributed antenna arrays. These arrays require each element to be precisely located and synchronized with each other in time, phase, and frequency. To this end, a drone-mounted, two-tone communication system was developed. It uses a transmit-retransmit-receive architecture, which obtains all of the necessary data required to compute and correct the phase, frequency, and time differences between each element while estimating distance. When integrated into a distributed array of drones, this two-tone communication system will be essential for reliable operation.

Test Equipment Automation And Remote Operation Curriculum Senior Project, Raheel Rehmatullah

Electrical Engineering

The goal of this project is to create new lab procedures and lab bench permutations for Cal Poly EE students to implement automated Test and Measurement equipment into their electrical engineering education. Currently EE students at Cal Poly have no classroom based opportunities to learn about leveraging software skills and test equipment knowledge in order to automate measurements, which is a valuable skill for an electrical engineer in the workforce. The curriculum outlined in this project will include three experiments, each leveraging an instrument controller, and Python as the primary scripting language. Each procedure will require students to write Python …

Autonomous Mapping Rover, Garrett Jones, Timothy Kyle Chu, Eugenio Caruso Pasos

Electrical Engineering

This report details the design, implementation, and evaluation of "Rovero," an autonomous mapping rover developed as a senior project. Rovero integrates state-of-the-art technologies, including ROS2 for communication, SLAM algorithms for mapping, and sensor fusion for accurate navigation. The project aimed to achieve robust autonomous operation in indoor environments, leveraging a combination of LiDAR, IMU, and encoder data for real-time decision-making. Key challenges addressed include path planning, obstacle avoidance, and integration of multiple sensor inputs. Results demonstrate successful mapping capabilities and efficient navigation performance.

Project Owl: Quad Rc2, Ethan Cy Zane

Electrical Engineering

Quad RC2 is a new radio designed to be compatible with the Cluster Duck Protocol (CDP). It must be able to act as all parts of the mesh network and be able to find its location with GPS. Much of the RC2 effort is already completed. This project ports the previously developed firmware to the new board and runs tests to assess its capabilities.

An Analysis Of The Power Consumption Of Various Computer Vision Machine Learning Techniques On A Microcontroller Utilizing The Clusterduck Protocol, Kaveh Shafiei

Electrical Engineering

Constant data processing is essential for effective data collection, particularly in remote and hard-to-reach areas. The need for efficient, autonomous data acquisition and transmission is increasingly addressed by integrating machine learning within larger communication networks. This paper explores the application of machine learning techniques with Internet of Things (IoT) mesh networks. Utilizing the LoRa communication protocol, data is captured and analyzed on an edge device and transmitted to a larger communication network. The ClusterDuck Protocol (CDP), developed by OWL Integrations, serves as an IoT mesh network designed to allow for communication in areas lacking traditional static infrastructure such as WiFi …

Leader-Follower Platooning With Turtlebot3: A Low-Cost Ros Test-Bed Using Vision-Lidar Fusion, Patrick Kelly Crandall, Kalon Ma Bienz

Electrical Engineering

This report presents the design, implementation, and indoor validation of a two-robot leader–follower platoon built on low-cost Turtlebot3 platforms. Each robot runs ROS Noetic on an on-board Raspberry Pi 4, fusing a fisheye camera for HSV-based lane detection with an LDS-02 LiDAR for clustering-based leader identification. A dual-loop architecture (PD steering for lateral control and PID for longitudinal gap regulation) maintains a 0.40m headway and keeps the follower centered within +/- 5 cm of the lane midline, without any inter-vehicle communication or external localization. Track experiments at speeds up to 0.18m/s achieved mean gap error of +/- 3 cm and …

Selena Quintanilla-Pérez: Breaking Barriers In Tejano Music And Shaping Mexican-American Identity, Fatima Hernandez-Barajas

World Languages and Cultures

This project will focus on how Selena Quintanilla-Perez broke barriers in Tejano music for women and became a cultural icon representing the aspirations of the American Dream for the Mexican American community. The paper begins with a summary of Selena’s life and accomplishments, followed by an examination of the history of Tejano music, the role of women within the genre, Selena’s unique relationship with it, and how she embodies the pursuit of the American Dream while representing the Mexican-American identity within the community. Through this analysis, the project highlights how Selena’s success challenged traditional gender roles and bridged bicultural identities, …

Foot Pedal Assistive Device, Julian Rubinstein, Connor Jessen, Isabelle Utsler, Sydney Alexander

Mechanical Engineering

Individuals with lower-limb mobility problems may have trouble accurately locating the pedals of a three-pedal manual transmission car, and some medical conditions cause individuals to fatigue more quickly when driving. This project aimed to create a device that assists in locating the user’s feet, indicates to the user which pedals are currently in use, and provides a visual and physical warning if they are not in the correct place. The project sponsor, Alan Keizer, is the primary stakeholder in this project. This device will be designed specifically for Alan’s Subaru BRZ and will address Alan’s specific lower-limb mobility issues that …

Drone Package Delivery System, Aiden Tyler Sim, Ryan Anders O'Toole, Matthew Karl Wyant, James Shaw Glanville

Mechanical Engineering

In response to the demands of the 2025 C-UASC (California Unmanned Aerial Systems Competition), our team developed an autonomous drone payload delivery system capable of two distinct delivery modes: a precision-controlled descent and a high-speed aerial drop. Designed for modular integration with UAV platforms, the system prioritizes reliability, accuracy, and simplicity under desert environmental conditions. Our solution features a custom winch mechanism with a programmable stepper motor, a passive mechanical hook for tension-based release, and a servo-actuated trapdoor for high-altitude drops. The design was extensively tested for structural integrity, motor torque requirements, drop precision, and electronics reliability—culminating in a robust …

Uav & Ugv Drone Competition (Raytheon), Christian Michael Freese, Adien Edmond Haro, Ethan Ray Andres, Sam Sakaguchi

Mechanical Engineering

Autonomous vehicles have been starting to address real-world issues through innovative technology. RTX (Raytheon) needs a way to have two autonomous vehicles, an unmanned air vehicle (UAV), and unmanned ground vehicle (UGV) reliably communicate with each other with the goal of landing and delivering a payload to designated delivery zones. This will foster creativity, innovation, and team-solving skills. Additionally, it will also promote & strengthen university relationships, evaluate top graduates, and promote corporate branding.

This report details the design process of a UAV-UGV delivery system developed for the RTX Autonomous Vehicle Competition (AVC). The system features a custom-built hexacopter UAV …

Llnl Raft Flash Pole Redesign, Jack Stangel, Evan Wolfson, Jake Borden, Alexander Meeter

Mechanical Engineering

During research exercises in the ocean, Lawrence Livermore deploys a fleet of rafts outfitted with flash modules affixed to tall poles (in tandem called flash poles) that flash while a photo is taken to act as datums for data collection. The current flash pole design that the LIDSS (Lawrence Livermore Independent Diagnostic Scoring System) team uses is too short to be visible in high seas, not mechanically suited to be made taller, too susceptible to the elements and blunt impact and too difficult to service. We aim to solve these issues.

Trailer Transport System For Multi-Ton Bins, Joanna Lizbeth Bendy, Kevin Matthew Creel, Annelise Vaara Cuneo, Hugo Alonso Valdez

Mechanical Engineering

This project aimed to improve the process of transporting 10,000-pound industrial waste bins. The current method for relocating these bins poses safety risks and requires significant manual effort. This project presents a conceptual solution that enables a single operator to efficiently and safely move roll-off bins using a custom-designed trailer system. The design incorporates three main subsystems: a trailer frame, an integrated winch system, and an off-the-market puller device to guide and secure the bin during transport. Two scaled proof-of-concept prototypes were fabricated to evaluate key aspects of the system's functionality. Testing and analysis suggested that the system is viable …

Heart Valve Leaflet Cutting Automation, Gabriella Aclan, Josh Deweese, Lizzie Dilao, Jason Wong

Mechanical Engineering

The content contained in this report is confidential and proprietary information of Edwards Lifesciences.

Poly Mars Mini-Rover, Dane Carroll, Aaron Lubinsky, Henry Bouma, Gerardo Tapia-Onate, Scott Frizzel

Mechanical Engineering

The Cal Poly Mars Rover project is creating a fleet of near-identical rovers operating collaboratively to research the surface of Mars. Over the last six years, teams at Cal Poly have been developing vehicles to be launched upon the commercialization of interplanetary travel. Two of these vehicles are to take the roles of ‘Scout’ and ‘Relay’ with the most significant difference being their respective ‘arms.’ The ‘Scout’ will have a robotic arm that interacts with objects on the surface while the ‘Relay’ will have a fixed arm, equipped with a StarLink antenna to communicate with orbiting satellites as seen in …

2024-2025 Cal Poly Fluid Power Vehicle Competition Team, Jaskaran Singh Hothi, Justin Menzie Lesko, Tristan Kai Crawford, Lucas Rupert Erickson, Diego Velazquez

Mechanical Engineering

The Fluid Power Vehicle Challenge (FPVC) provides an avenue for the exploration of fluid-powered transportation, adhering to regulations set by the National Fluid Power Association (NFPA). This document serves as a roadmap for our team’s research, design, and manufacturing of a vehicle for participation in the FPVC. The team’s journey began with extensive background research, encompassing stakeholder engagement, analysis of existing solutions, and education on fluid power fundamentals. From this information, we decided to focus on enhancing mechatronics systems, improving the transmission, optimizing the mounting, adding a pneumatic element, and improving the efficiency of the hydraulic system of the vehicle …

Shop Skills, Colin Moore, Bridget Davenport, Xavier Gagnaire, Joseph Watanabe

Mechanical Engineering

The first goal of this project is to present the machine shops with a new and memorable Red Tag, recently rebranded as the License to Drill certification. This certification provides students with a lasting project that also teaches them about the usage and safety of a broader scope of machines.

After students receive their License to Drill, students must devote a minimum of two hours in the shop to gain access to further training associated with the lathes, mills, and welders. These trainings are now called Intermediate Shop Skills Trainings, formerly known as Yellow Tag Trainings. Our second goal is …

Large Backflow Check Valve Life Cycle Test Stand, Colin Bentley, Christopher Carloni, Ethan Gray, Luke Romanini

Mechanical Engineering

Backflow preventers are plumbing devices containing internal check valves used to prevent cross-contamination between downstream contaminants and potable water supply. Zurn Wilkins needs a life cycle test stand to mechanically force open check valves submerged in contaminated water and verify check performance. The stand needs to be modular to work with a range of check types and sizes.

Zurn Wilkins is the primary stakeholder for this project. Secondary stakeholders include commercial and residential building owners, contractors, and water utility companies, who rely on their products for safe and efficient water management. The team for this project consists of four Cal …

Hi-Trac Camera Jig, Gabriel Frank Junge, Josh Sherreitt, Jake Weiser, Luke Silver

Mechanical Engineering

Uranium fuel assemblies are stored upright in an underwater container inside the spent nuclear energy fuel pool at Diablo Canyon. The engineers and in-service-inspection team all work together to safely locate this container inside the pool on pins so it is guaranteed safe before they begin loading it with spent uranium fuel rods. The Operators currently employ the use of a zip-tied camera jig that is lowered into the pool along with the tank (called a HI-TRAC) to ensure it is oriented correctly in the pool. This camera jig is in desperate need of re-vamping and re-designing to optimize efficiency …

Design Principles For Robotic-Controlled 3d Printing Of Soft Tissue-Mimicking Materials, Karina Mealey

Master's Theses

Geometrically and physically accurate 3D models are emerging as essential tools for surgeons in pre-operative planning and training, but current methods of producing these models are not sufficient. Existing solutions have downsides such as high costs, long and tedious production times, high complexity resulting in a lack of scalability, or an inability to meet material requirements for accurately simulating human tissue.

The objective of this work is to develop principles for a low-cost, easy-to-use 3D printing system capable of prototyping with soft tissue-mimicking materials. To pursue this goal, a MyCobot280 robot arm was used as the mechanism to explore the …

Machine-Checked Proofs For Correctness Guarantees In Containment Architectures, Sophie Russ

Master's Theses

Modern computing systems are increasingly susceptible to attacks at the hardware and software levels. Formal methods offer promising guarantees as to the correctness and security of systems. However, these methods tend to scale poorly and are thus insufficient to protect complex systems. Leveraging minimal amounts of trusted hardware and software to ensure the security of whole systems is a promising approach to gain the benefits of formal methods without having to overcome the scaling problem. TrustGuard realizes this approach: a containment architecture model that requires all outgoing communication from the host computer to be validated by a small, external hardware …

Frequent Itemset Mining With Tidyclust In R, Andrew D. Kerr

Master's Theses

Unsupervised learning is closely associated with clustering, however other methods fall under this umbrella such as data mining. In R, the tidyclust package provides a unified interface for clustering models, yet lacks support for data mining. This thesis addresses this gap by introducing the Apriori and ECLAT algorithms into tidyclust, with a focus on frequent itemset mining. Unlike traditional clustering models, frequent itemsets produce groupings of column variables, rather than cluster labels or partitions of observations. To address this, a novel clustering approach is proposed: items (columns) are grouped based on their ”dominant” frequent itemset. A key contribution is a …

Srh Lab Case Study: Ia, Mental Models, And Website Labels, Trista Wang

Graphic Communication

This paper discusses the results of a research study investigating Cal Poly students’ mental models regarding the Sexual and Reproductive Health Lab’s (SRH Lab) website. Mental models are beliefs that the user has about a website and how it functions, which affects how users interact with the website (Chan 2024). By tailoring its website to students’ mental models through appropriate nomenclature, the SRH Lab will be able to better engage and disseminate information to students.

52 students participated in a card sorting study, in which they were asked to intuitively sort cards labeled with SRH Lab website labels into different …

Floating Wind Turbine Foundation, Clayton Lahodny, Dillon Nelson, Trevor Ortega, Andrew Cervantes

Mechanical Engineering

The 2024 Collegiate Wind Competition (CWC) has introduced a new element to their Turbine Design Competition: a floating foundation. In previous years, foundations have been fixed-bottom in a box of sand and water. The Cal Poly Wind Power Club, who competes in the CWC every year, requires a floating foundation to be designed, manufactured, and tested to assist in winning the competition. The foundation is a large, hollow, cylindrical barge with a hanging spar (heavy mass). The barge will provide a restoring moment using buoyancy, and the heavy spar provides additional restoring moment. Four cables will be attached at the …

Functionalization Of A Calcium-Based Squaric Acid Metal Organic Frameworks With Amine-Based Polymers For Enhancing Post Combustion Carbon Capture, Corinne D. Watson

Master's Theses

The primary driver of climate change is the release of carbon dioxide (CO₂) from fossil fuel combustion. Global climate change has resulted in sea level rise, adverse weather patterns, and countless other negative global effects. Several carbon-reduction frameworks emphasize the transition to clean energy sources; however, other strategies must be concurrently pursued to immediately and effectively reduce atmospheric carbon dioxide point source emissions. Metal organic frameworks (MOFs) are a promising new technology for post-combustion carbon dioxide capture. The materials are synthesized using organic linker molecules and metal ion joints. Notably, there are several challenges with various types of …

Tanzania Mbesese Initiative 2025, Genevieve Marie Tedder, Frances Street, Audrey Wojcik, Alex Trujillo, Tristen Mullin, Jessica Jane, Anna Marie Langer, Carissa Castro, Molly Linong Rojec, Haley Pilcher

Architectural Engineering

The Tanzania Mbesese Initiative is an ongoing project based in Same, Tanzania. The Mbesese Initiative for Sustainable Design (MISD) is working in collaboration with ARUP and Cal Poly to develop a polytechnic college for the community in Same. Our team of ten students aims to support the design and construction process of the project.

Outdoor Exercise Area Renovation, Hagan T. Jackson, Chet S. Crummett, Jesse E. Muth

Architectural Engineering

The Outdoor Exercise Area Renovation project revitalizes a well-used outdoor exercise area located near the baseball fields at Cal Poly. The existing exercise equipment, originally donated by Maino Construction, was weathered, but the area remained well-utilized and presented potential for revitalization. This project transforms the site into a functional and resilient space by replacing the pull-up and dip bar equipment, constructing a 300 square foot pavilion, and adding a concrete slab and integrated concrete benches. The new design enhances usability, providing a multifunctional area for the Cal Poly community to exercise, socialize, relax, and enjoy scenic views.

The renovated area …

Physical Construction Of 1/2 Scale Concrete Wall, Alicia Danielle Lee, Cali Jeanne Carson

Architectural Engineering

This senior project was the physical construction and material testing of the half-scale reinforced concrete wall specimens. This included all stages of the building process, from formwork and reinforcement to concrete placement and laboratory testing.

Practical Integration Of Reality Capture In Architecture, Engineering, Construction, And Operations (Aeco) Workflows: Cost And Application Considerations, Dylan T. Ramsey

Architectural Engineering

This paper explores the practical integration of Reality Capture (RC) technologies, specifically LiDAR and photogrammetry, within Architecture, Engineering, Construction, and Operations (AECO) workflows. As interest in RC grows, costs decrease, and industry applications expand, this paper aims to clarify the current landscape of research, industry practices, hardware, and software. It provides managers, RC technology enthusiasts, and AECO professionals considering its implementation with essential insights into cost considerations, expectations, and limitations. The paper details common research and industry applications, including as-built documentation, surface analysis, and deflection monitoring, and cross-references cost data and project requirements to provide informed recommendations and considerations for …

C.H.I.I.P., Continuous Health Information For Infrastructure Protection, Lariel Sasha Henley

Architectural Engineering

This paper presents the development and validation of CHIIP (Continuous Health Information for Infrastructure Protection), a wireless structural health monitoring (SHM) device designed to provide accessible, real-time data on structural performance of building structures following a seismic event. The system integrates inclinometers, accelerometers, linear potentiometers, and strain gauges with ESP32 microcontrollers to create a compact and robust data collection device that can transmit synchronized sensor data via Wi-Fi to a remote server. A web-based interface enables users to access and download live data for rapid structural evaluation. The device was tested in three phases: a small-scale wired baseline test, a …