Digital Commons Network^™

Heating Lanyard To Warm Body Core, Cole Bunker, Spencer Alonge, Tyler Elsom, Matthew Hyland

Mechanical Engineering

Calculated Industries, a company that specializes in construction products headquartered in Carson City, Nevada, has sponsored the Heating Lanyard to Warm Body Core senior project. The objective of the project was to design and manufacture a body core heating device that will be used by construction workers to keep warm in cold environments. The goal is to create a device that is safe, comfortable, and temperature controllable. Our team consists of four mechanical engineering students at California Polytechnic State University, San Luis Obispo. Research was performed to analyze current products in the market, analyze how to best provide heat to …

Insulated Solar Electric Cooker With Phase Change Materials, Weijun Zhao, Jake Lung, Owen Chu, Sarah Melzer

Mechanical Engineering

This Senior Project Report documents the development and design process of the Insulated Solar Electric Cooker with a Phase Change Material (ISEC w/ PCM). In this project, we developed a PCM assembly that can be integrated into an existing ISEC system which utilizes two 100 W solar panels. This report details the use of a nitrate salt solution of 60% NaNO3 and 40% KNO3 and demonstrates its potential as a viable form of thermal storage solution for cooking. We found that only 1kg of PCM is able to retain its heat for around 5 hours after power removal and believe …

Shallow-Water Wind Turbine Foundation, Andrew Walker, Nico Nani, James Cusanelli, Zachary Dunkelberger

Mechanical Engineering

Over the 2021-2022 academic year, we, the Shallow Water Wind Turbine Foundation senior project team, designed, manufactured, and tested a fixed bottom, sand mounted turbine foundation for the Cal Poly Wind Power Club’s Collegiate Wind Competition turbine. The foundation was restricted to certain material, installation, and geometric constraints outlined in this report, and needed to support the turbine under operating conditions including 22 m/s wind speeds. The design was analyzed using primarily a bearing capacity geotechnical analysis to determine final geometry and weight. The foundation was then manufactured using welded, custom carbon steel parts.

The foundation was inspected for geometric …

Baker/Koob Final Report: Solar Solution For Mini Mars Rover, Jonathan Cederquist, Cole Korchek, Derick Louie, Michaella Ochotorena, Collin Petersen

Mechanical Engineering

This project focused on designing, building, and testing a functional prototype of a collapsible solar array on the mini Mars rover being developed by client and sponsor, Mr. Rich Murray. Although many previous collapsible solar arrays have been deployed for space missions, the previous solar-powered Mars rovers only deployed their arrays once upon landing. This solar array will be able to collapse and deploy multiple times to allow for greater rover mobility and stability when the rover is not charging. This system is critical to the success of the rover project because it provides power without which the rover cannot …

Legislative Language For Success, Sanjana Gundala

Master's Theses

Legislative committee meetings are an integral part of the lawmaking process for local and state bills. The testimony presented during these meetings is a large factor in the outcome of the proposed bill. This research uses Natural Language Processing and Machine Learning techniques to analyze testimonies from California Legislative committee meetings from 2015-2016 in order to identify what aspects of a testimony makes it successful. A testimony is considered successful if the alignment of the testimony matches the bill outcome (alignment is "For" and the bill passes or alignment is "Against" and the bill fails). The process of finding what …

Smart Usb-C Wall Plug For The Dc House Project, Ridge Lahti, Dino Maslic

Electrical Engineering

DC operated devices and appliances powered by AC systems suffer inefficiencies resulting from the losses of converting AC energy into DC energy. At Cal Poly, the DC House Project aims to minimize the need for AC electricity in homes and encourage the use of renewable energy systems. The DC House uses a 48V DC bus that must be stepped down for use with increasing number of DC loads in a typical home. In this project, a Smart USB-C Wall Plug is designed to work with USB Power Delivery to provide a variable voltage output for use with these DC loads …

Current-Source Dc-Dc Converter, Rocio Sanchez-Mendoza, Carlos Aguilar, Adrian Aranjo

Electrical Engineering

In this project, a hardware implementation of a current-source DC-DC converter for powering sensors used in an underwater communications system is presented. The proposed converter is designed to step down an input current of 0.9 A to 0.625 A, while maintaining an output voltage of 24 V and output power of 15 W. An overview of the system design is explained as well as the component selection process. The design of the converter was simulated and evaluated using LTspice before being physically constructed on a printed circuit board. Performance evaluation of the proposed converter was carried out in multiple lab …

Hvac Hardware Modeling Using Programmable Automatic Controller, Panthil Ketan Patel, Lumanti Tuladhar

Electrical Engineering

The primary purpose of this project is to use the donated programmable logic controllers (PLC) from Schneider Electric to develop experiments for a future lab class at Cal Poly. Our goal as the first group working on this project is to develop an experiment where the PLC can control the HVAC system based on temperature and humidity sensors and user inputs to maintain a desired consistent temperature. The PLC will be controlled using Unity Pro XLS/Control Expert software for simulations. The overall purpose of the experiments will be to demonstrate the potential of the PLC to minimize manual intervention while …

Standalone Wireless Humming Music Synthesizer, Elizaveta Viktorovna Koush, Conrad Kinsey, Alberto Munoz

Electrical Engineering

This project, called a standalone wireless humming music synthesizer, aimed to provide a tool for musicians to make creating music easier. It did this by removing learning barriers and adding an assistive functionality element that current synthesizers fail to address.

Existing methods for synthesizers typically include a keyboard or some collection of buttons to play melodies on. This requires the knowledge of music theory and a learning curve for the instrument, and this device aims to tackle this barrier. A device that can synthesize your voice into high-quality audio removes this musical knowledge barrier and allows anyone to easily convert …

Burt's Bees: Branding And Packaging Update, Mia Rogers

Graphic Communication

This project will focus on examining the existing brand identity, package design, and social media marketing collateral for Burt’s Bees personal care company in order to create updated versions of each. I will be re-branding the products to appeal to a wider target audience, focusing primarily on Generation Z and their consumer preferences.

My deliverables will consist of a complete brand style guide (logo variations, primary and secondary color palettes, typography, and visual collateral), updated packaging (four popular lip balm flavors, the beeswax hand salve, and two facial cleansers), and an example of a digital advertisement showcasing the new brand …

Montagna Restaurant Brand And Website Development, Kevin A. Shin-Wheeler

Graphic Communication

My goal for this project was to provide engaging branding and collateral for the fictitious Montagna restaurant to increase its consistency and tangibility. I wanted to create a design guideline for all aspects of the Montagna brand to ensure that Montagna’s logo, typefaces, colors, interaction elements, and other stylistic choices are aesthetically pleasing and match the brand’s identity. Next, set out to make an accessible, interactive, and exciting website for the restaurant and a cohesive menu aligning with the design specifications. Although the brand is fictitious, I wanted to design it with actual needs in mind so that somebody could …

Codes Of Conduct In Student Media: An Analysis Of Student Perceptions Of Ethics Codes, Torstein A. Rehn

Journalism

The following is a study into students' perceptions of codes of conduct in student media organizations. Codes of conduct in a media setting have long been a focus of research, but little research has been done into their application in a student media environment. Student media organizations operate in a unique setting where they are entirely staffed by novice reporters. These organizations double as training grounds for students and as legitimate news sources. This study seeks to analyze this phenomenon by interviewing student media members. The goal of this study is to understand what current students seek in a code …

A Comparison Of Exotic And Pyraf In Analyzing Exoplanet Transits, Kailei A. Gallup

Physics

In this paper we discuss the data analysis processes using PyRaf, a Python-based version of IRAF, which is one of the most commonly used coding softwares in the astronomy community, as well as the analysis process using EXOTIC. Additionally, we will compare the outcomes from each process to determine if either has significant benefits over the other.

Developing A Data Acquisition System For Use In Cold Neutral Atom Traps, Jonathan E. Fuzaro Alencar

Physics

The rising interest in quantum computing has led to new quantum systems being developed and researched. Among these are trapped neutral atoms which have several desirable features and may be configured and operated on using lasers in an optical lattice. This work describes the development of a new data acquisition system for use in tuning lasers near the precise hyperfine transition frequencies of Rb 87 atoms, a crucial step in the functionality of a neutral atom trap. This improves on previous implementations that were deprecated and limited in laser frequency sweep range. Integration into the experiment was accomplished using an …

Mars Prototype Rover Environmental Measurement System, James A. Renick

Computer Engineering

In my senior project, the problem I am trying to solve is how to efficiently design, create, and install an original library onto a Mars prototype rover operating system and to further use that library to integrate a new weather measurement sensor device into the rover system with the necessary software and hardware implementations. This is an important and highly valued problem as many aerospace and other engineering companies utilize rovers and other autonomous systems for important research, explorations, and reconnaissance missions and goals. In solving this problem, I utilized many resources that were available to me such as advisors, …

Researching The Impact Of Cal Poly Classes On Computing Students Perceptions Of Computer Ethics And Social Responsibility, Annie Joss

Computer Engineering

The importance and impact of socio-technical systems are playing an increasing role in the education of computing students. Discussion of ethics and social responsibility has always been a tenant of computer science education; however, research has shown engineering and computer science students lose focus on these values over their engineering education. Cal Poly computing departments have taken steps to emphasize social responsibility and ethics through required and suggested courses. This project focuses on examining the values and beliefs of Cal Poly computing students, who were surveyed over Winter and Spring Quarters in 2022. This project is inspired by Dr. Cech’s …

Developing A Miniature Smart Boat For Marine Research, Michael Isaac Eirinberg

Computer Engineering

This project examines the development of a smart boat which could serve as a possible marine research apparatus. The smart boat consists of a miniature vessel containing a low-cost microcontroller to live stream a camera feed, GPS telemetry, and compass data through its own WiFi access point. The smart boat also has the potential for autonomous navigation. My project captivated the interest of several members of California Polytechnic State University, San Luis Obispo’s (Cal Poly SLO) Marine Science Department faculty, who proposed a variety of fascinating and valuable smart boat applications.

Smart Bottle Ble Integration, Joshua M. Rizzolo

Electrical Engineering

In 1975, four percent of children aged five to nineteen were categorized as overweight or obese. As of 2016, this figure climbed above 18 percent [1]. Researchers at California Polytechnic State University San Luis Obispo (Cal Poly) want to investigate the effect of overeating in early childhood on later childhood obesity. This research requires collecting feeding pattern data on infants, which proves challenging. Parents cannot be relied on to regularly collect clean data due to factors including work schedule, multitasking, and general exhaustion. Thus, we have developed a tool to automatically collect data on feeding frequency and duration, as well …

Maximum Trapping Focal Length In Photophoretic Trap For 3d Imaging Systems, Jason M. Childers

Electrical Engineering

This product is a photophoretic trapping system which allows varying focal lengths to test which focal lengths are possible for trapping toner particles. This system establishes that there exists a maximum trapping distance limitation and is the first time the effect of focal length is studied in a photophoretic trapping system. Increasing photophoretic trapping focal length is necessary for improving this technology as a 3D display. The 3D imaging technology is realized by dragging a microscopic (micrometer-scale) particles with a laser beam to trace an image. This technology can display fully colored and high-resolution 3D images visible from almost any …

Bicep Muscle Rep Counter With Semg, Matthew Max Garcia

Electrical Engineering

The Bicep Muscle Rep Counter with SEMG is a device that was made to develop three repetition thresholds or difficulty levels from a fully-flexed bicep brachii muscle and signal to the user when consequent bicep muscle contractions pass said thresholds or levels. This device can be used when performing a bicep-focused movement or when generally flexing the bicep muscle. Essentially, this device serves to make sure each repetition of a muscle contraction passes a percentage value calculated from the electrical activity outputted from a max contraction.

The device is not designed for and does not produce data for muscle growth, …

Hum Synthesizer, Daniel Keith Mcfall, Jason Chang

Electrical Engineering

Most modern music, especially the popular and rising genres such as pop music and rap music are more reliant on music synthesizers than ever before. While other instruments are readily used to sample background noises, the main form of sound generation is becoming more digital rather than using acoustic instruments. However, many people that want to make music aren’t familiarized with traditional music theory and would have difficulty using a traditional synthesizer. The Hum Synthesizer aims to allow a wider audience to access the functions of a traditional synthesizer by using voice controls rather than keyboard controls. If the user …

Proyecto De Traducción: Compartiendo Cultura A Través De Historias De Latinoamérica, Diana P. Beas

World Languages and Cultures

This project attempts to cultivate awareness of ethical and professional perspectives that reflect linguistic and cultural heritage. In other words, creatively share the culture and history of Latin American countries. To achieve this, this project consists of two short stories I have translated. The stories were originally written in Spanish and I have translated them to English. Furthermore, each story is from a different Latin American country (one is from Argentina and the other is from Guatemala). To carry out this project, I began by researching simple background information of each country to which the stories belong to. Afterwards, I …

Interactive Lego Girl Scout Arm, Christopher Suzuki, Emi Okuyama, Bryson Shores, Karina Sandoval

Mechanical Engineering

This Senior Project Report document outlines the senior design project for Girl Scouts of California’s Central Coast (GSCCC) led by a team of four Mechanical Engineering students at California Polytechnic State University, San Luis Obispo. The project encompasses the researching, designing, prototyping, and testing of a LEGO robotic arm for the Girl Scouts to learn more about STEM (Science, Technology, Engineering, and Mathematics) and provide support to each Girl Scouts cookie sales in their stores. Their goal was to build a LEGO robotic arm that will interact with customers at the Girl Scout stores and promote the girl scouts' interest …

Mmteg Heatsink Design, Peyton Nienaber, Kadin Feldis, Alec Savoye, Jack Waeschle

Mechanical Engineering

In this document, Cal Poly Senior Design Team F16 presents a summary of its work developing a suitable heatsink for Gas Technology Institute’s Methane Mitigation Thermoelectric Generator. After several months of iterating between experimental testing and simulated heat transfer, a suitable prototype was selected for use in further refining simulation parameters. This was called the structural prototype and it allowed Team F16 to confirm several remaining unknowns relating to component thermal conductivity. All documentation of this process can be found in Preliminary, Critical, and Interim Design Review documents (PDR, CDR, IDR), included in this report. Having a realistic model …

Acoustic Release And Receiver System, Sebastien Danthinne, Carlos E. Otero, Joseph R. Lyons, Reagan M. Lawson, Lily G. De Torres

Mechanical Engineering

To design and build an acoustic release and receiver system, our team performed extensive
background research, developed thoughtful concepts of potential designs, performed ideation,
and constructed multiple prototypes. After constructing both a conceptual and structural
prototype, our team began updating the structural prototype to meet requirements expected of the
verification prototype. After completing the verification prototype, our team entered the testing
stage of the project. The electronics housings were pressure tested to determine if any leaks
would occur, the Dyneema rope was tensile tested to verify the system could withstand affected
loads, and the time to re-spool the device was …

Universal Tread For Power Wheelchairs, Daniel Ceja Gonzalez, Ryan Scarcella, Aaron Rocha, Brian Song

Mechanical Engineering

This project was centered around developing a fully independently driven powered wheelchair attachment that would allow users to traverse non-wheelchair accessible terrain. The initial goal was to create a full-scale model that would allow our user to use and test as a prototype to get over curbs and some light dirt off-roading. However, as the project progressed and limitations of time and money came up, this project was rescoped to a quarter-scale proof of concept model. The goal of this new project was to create a prototype that would carry a scaled-down load and traverse a scaled-down curb. This was …

Picnic Table Solar Powered Shade, Louis Gerny, Esmeralda Gonzalez, Connor Gigone, Ryan Dean

Mechanical Engineering

The Electrical Engineering department at California Polytechnic State University, San Luis Obispo has an outdoor courtyard that, until recently, was lacking in accommodations for student studying, group meetings, or simple leisure. A group of four mechanical engineering majors, “The Benchwarmers,” were tasked by Dale Dolan with the construction and installation of a picnic table to fulfil these needs. More specifically, Dr. Dolan also requested that the table provide off-the-grid power to charge student’s devices.

This report details the design, manufacturing, and testing of a solar powered picnic table. The table was designed to accommodate up to seven users, including one …

Bongoties Tying Machine Design, Zachary Stednitz, Tori Bornino, Jackson Mclaughlin, Shea Charkowsky

Mechanical Engineering

BongoTies are a reusable tool for cable management or general fastening, consisting of a strong rubber band attached to a bamboo pin. BongoTies is a company founded by our sponsor Tim Petros that sells its product on a variety of popular shopping sites, such as Amazon and eBay. Currently, the assembly process is to hand-tie the rubber band to the pin for every BongoTie. This is too slow to keep up with demand, requires a skilled worker with good dexterity, and can cause pain or injury if the rubber band snaps back onto the worker’s fingers. In this senior project …

Solar Solution For Mini-Rover, Michaella Ochotorena, Derick Louie, Jonathan Cederquist, Collin Petersen, Cole Korchek

Mechanical Engineering

This project focuses on designing, building, and testing a functional prototype of a collapsible solar array on the mini Mars rover being developed by client and sponsor, Mr. Rich Murray. Although many previous collapsible solar arrays have been deployed for space missions, the previous solar-powered Mars rovers only deployed their arrays once upon landing. This solar array will be able to collapse and deploy multiple times to allow for greater rover mobility and stability when the rover is not charging. This system is critical to the success of the rover project because it provides power without which the rover cannot …

Therapeutic Mechanical Horse, Cade M. Liberty, Aleya Dolorfino, Peter Philips, Zuzanna Dominik, Luke Watts

Mechanical Engineering

Jack's Helping Hand and its hippotherapy participants required a device to serve as an alternative to a live horseback riding experience that could also increase the range of riders. This would provide more clients with equine-assisted therapy that has proven to better the lives of people with both physical and mental disabilities. Horses can be unpredictable, tall, and sometimes anxiety-inducing, especially for new riders. Our group’s aim was to develop a mechanical horse that will be able to reduce these issues for equine therapy centers and the riders they help. When a rider gets to practice sitting on the horse …