Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network™

Open Access. Powered by Scholars. Published by Universities.®

Other

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type

Articles 19711 - 19740 of 25685

Full-Text Articles in Entire DC Network

Performance Of Large Scale Steel Fiber Reinforced Concrete Deep Beam With Single Opening Under Monotonic Loading, Carlos Flores Jan 2009

Performance Of Large Scale Steel Fiber Reinforced Concrete Deep Beam With Single Opening Under Monotonic Loading, Carlos Flores

Civil Engineering Theses - Archive

The design of complex, discontinuous stress trajectory regions (D-regions) is complex in natureand cumbersome to design. The performance of a large scale steel fiber reinforced concrete (SFRC)deep beam with single opening under monotonic loading was tested under controlled conditions. Themain objective of this study was to see if Steel Fiber Reinforced Concrete (SFRC), used as a bettermaterial than reinforced concrete (RC) offered an alternate to the cumbersome and iterative stepsinvolved in strut-and-tie (STM) methodology. Additionally, a similar reinforced concrete (RC) specimenwas tested under the same controlled condition designed with classical strut-and-tie model designmethodology reinforced using conventional steel bars.Material testing was …

Go to article

Theoretical Feasibility Study For A Conceptual Approach To Trenchless Replacement Of Culverts, Diego R. Calderon Jan 2009

Theoretical Feasibility Study For A Conceptual Approach To Trenchless Replacement Of Culverts, Diego R. Calderon

Civil Engineering Theses - Archive

Culvert damage and collapses and their renewal alternatives are a raising concern in today's infrastructure topics. In most cases damages are irreversible; however, in many cases opportunities exist to correct and renew. While conventional open-cut construction brings inconvenience to the public, trenchless technology brings a greener, reliable and more socially acceptable alternative to renew culverts. Considering the strong dependency on highway transportation by the American lifestyle, collapses of culverts in major roads may produce chaotic traffic redirections. To reduce this risk, this research sets a path for a construction and feasibility study on a new culvert replacement method based on …

Go to article

Use Of Electrical Resistivity And Multichannel Analysis Of Surface Wave Geophysical Tomography In Geotechnical Site Characterization Of Dam, Joshua Lee Hubbard Jan 2009

Use Of Electrical Resistivity And Multichannel Analysis Of Surface Wave Geophysical Tomography In Geotechnical Site Characterization Of Dam, Joshua Lee Hubbard

Civil Engineering Theses - Archive

Performance of geotechnical site characterization is a primary function of geotechnical engineers. Generalizations required to extrapolate conventional geotechnical boring data can limit the effectiveness of site assessments. Advancements in geophysical technology have simplified means of data acquisition and interpretation of electrical and seismic testing, allowing a broader audience of practitioners to utilize methods for various engineering and environmental applications. In this study, electrical resistivity and multichannel analysis of surface waves (MASW) seismic geophysical methods are used to expound upon previous geotechnical sampling and in situ testing conducted at an earthen dam site in East Texas. Findings from this study show: …

Go to article

A New Paradigm In User Equilibrium - Application In Managed Lane Pricing, Asapol Sinprasertkool Jan 2009

A New Paradigm In User Equilibrium - Application In Managed Lane Pricing, Asapol Sinprasertkool

Civil Engineering Dissertations - Archive

Ineffective use of the High-Occupancy-Vehicle (HOV) lanes has the potential to decrease the overall roadway capacity during peak periods. Excess capacity in HOV lanes during peak periods can be made available to other types of vehicles, including single occupancy vehicles (SOV) for a price (toll). Such dual use lanes are known as "Managed Lanes." The main purpose of this research is to propose a new paradigm in user equilibrium to predict the travel demand for determining the optimal fare policy for managed lane facilities. Depending on their value of time, motorists may choose to travel on Managed Lanes (ML) or …

Go to article

Advances In Helical Stent Design And Fabrication: Studies Of Stent Thermal Treatment, Stent Mechanical Properties, And Stent Interactions With A Simulated Plaque-Laden Artery, Tre Raymond Welch Jan 2009

Advances In Helical Stent Design And Fabrication: Studies Of Stent Thermal Treatment, Stent Mechanical Properties, And Stent Interactions With A Simulated Plaque-Laden Artery, Tre Raymond Welch

Bioengineering Dissertations - Archive

Advancements in processing biomaterials have lead to the development of bioresorbable PLLA drug-loaded stents with different geometric configurations. To further advance the technology, systematic studies have been carried out. This dissertation consists of six specific aims: 1) To characterize the effects of thermal annealing on the mechanical characteristics of PLLA helical stent, 2) To characterize the mechanical characteristics of a PLLA double helix stent, 3) To characterize the physical and chemical properties of PLLA films impregnated with niacin and curcumin, 4) To characterize the mechanical interaction of expanded stent and vascular wall with both model simulation and experimental studies using …

Go to article

Functional Near Infrared Spectroscopy For The Assessment Of Motor Cortex Plasticity In Pediatric Subjects Affected By Cerebral Palsy, Bilal Khan Jan 2009

Functional Near Infrared Spectroscopy For The Assessment Of Motor Cortex Plasticity In Pediatric Subjects Affected By Cerebral Palsy, Bilal Khan

Bioengineering Theses - Archive

Functional near infrared spectroscopy (fNIRS) is widely used to monitor hemodynamic changes occurring in the cerebral cortex as a result of neuronal activation. One of the current challenges in this field is that activation-related hemodynamic signals are often eclipsed by global hemodynamic fluctuations due to cardiac pulsation, respiration and Mayer waves. In this study, we demonstrate by using a combination of principal component analysis (PCA) and adaptive filtering that the global hemodynamic modulation signals can be effectively removed from the fNIRS measuring cortical hemodynamic response. While pediatric subjects were performing a finger tapping task, we concurrently recorded cardiac pulsation and …

Go to article

Durability Studies On Stabilization Effectiveness Of Soils Containing Different Fractions Of Montmorillonite, Aravind Pedarla Jan 2009

Durability Studies On Stabilization Effectiveness Of Soils Containing Different Fractions Of Montmorillonite, Aravind Pedarla

Civil Engineering Theses - Archive

Stabilization of clays with additives like lime and cement has been practiced for several years and worked well in improving the subgrades. Though this practice is used widely, there were cases where the treated subgrades exhibited premature failures. Many departments of transportation (DOT) agencies in the United States have had subgrade failures even after stabilization with chemical additives due to loss of stabilizer over a time period, or a stabilizer being ineffective in some soils. The design based on PI and gradation of soil followed by many DOTs is quite misleading due to the lack of inclusion of basic soil …

Go to article

Failure Analysis Of A Mechanically Stabilized Earth (Mse) Wall Using Finite Element Program Plaxis, Tahsina Mahmood Jan 2009

Failure Analysis Of A Mechanically Stabilized Earth (Mse) Wall Using Finite Element Program Plaxis, Tahsina Mahmood

Civil Engineering Theses - Archive

Mechanically Stabilized Earth (MSE) retaining walls have been increasingly used in many federal, state and private projects over the last 20 years. MSE walls are reliable, constructible, and cost effective. However, failure of MSE wall has become a problem for all agencies using them. This study presents the failure analysis of a segmental block, MSE retaining wall located in Rockville, Maryland. The top of MSE wall moved about 12 inches to 18 inches. An extensive geotechnical investigation program was undertaken to investigate the MSE wall failure. This study presents the results of investigations to determine the causes of failure. The …

Go to article

Spatiotemporal Measurement Of Freezing-Induced Deformation Of Engineered Tissues, Ka Yaw Teo Jan 2009

Spatiotemporal Measurement Of Freezing-Induced Deformation Of Engineered Tissues, Ka Yaw Teo

Bioengineering Theses - Archive

In order to cryopreserve functional engineered tissues (ETs), the microstructure of extracellular matrix (ECM) as well as the cellular viability should be maintained given that the functionality of ETs is closely related to the ECM microstructure. Since the post-thaw ECM microstructure is determined by the deformation of ETs during cryopreservation, the freezing-induced deformation of ETs was measured in the present study with a newly developed quantum dot (QD)-mediated cell image deformetry technique using dermal equivalents as a model system. The dermal equivalents were constructed by seeding QD-labeled fibroblasts in type I collagen matrices. After 24 hour incubation, the ETs were …

Go to article

Development And Benefits Of A Leed Project Management Database, Teri Schmig Jan 2009

Development And Benefits Of A Leed Project Management Database, Teri Schmig

Civil Engineering Theses - Archive

The U.S. Green Building Council is a non-profit community of industry leaders working to make green buildings available to everyone. The documentation process for achieving Leadership in Energy and Environmental Design (LEED® ) certification is highly complex and more time-consuming than necessary with currently employed systems. This thesis explains the need for development of a relational database as a means to increase the efficiency of the documentation process to meet LEED® requirements. This database will provide the construction project team a relational platform that guides the user through the LEED® administration and certification process. By developing a LEED® specific project …

Go to article

Development Of Microscope Stage Incubator For Long-Term Monitoring Of Neuronal Cell Culture During Axotomy, Kailash Karthikeyan Jan 2009

Development Of Microscope Stage Incubator For Long-Term Monitoring Of Neuronal Cell Culture During Axotomy, Kailash Karthikeyan

Bioengineering Theses - Archive

It is imperative to understand the patterns in regeneration of the central and peripheral nervous system after injury. This understanding would provide a fundamental cue towards molecules and other factors involved in regeneration, and how they affect the regeneration pattern after injury. In most culturing techniques currently used for neuronal culturing and observing the neuronal regeneration, it is difficult to determine the regeneration pattern (individual axonal level) though the overall regeneration is observed due to the complexity of neuronal network. Thus a model that provides isolation of individual axons and allowing us to monitor continuously upon injury has been developed. …

Go to article

Controlled Vascular Cellular Growth By Microstructured Patterned Surfaces On Implantable Biodegradable Polymer Scaffold., Nitin Garg Jan 2009

Controlled Vascular Cellular Growth By Microstructured Patterned Surfaces On Implantable Biodegradable Polymer Scaffold., Nitin Garg

Bioengineering Theses - Archive

The technological advances in the field of MEMS and biodegradable polymers with elastomeric properties have opened new areas of application for engineering of soft tissues such as blood vessel, heart valves, cartilage, tendon, and bladder, which exhibit elastic properties. In this thesis work, Microfabrication technology has successfully been applied to biodegradable polymer films to encourage cell growth in designated area. This work is presented with the final goal of fabricating implantable polymer scaffolds to produce small diameter blood vessels in a controlled manner spatially by using the concept of wettability and contact guidance.There are several methods to control cell growth …

Go to article

Molecular Modelling Of Dna Translocation In Bio-Functionalized Nanopores With Applications In Gene Sequencing, Abhijit Ramachandran Jan 2009

Molecular Modelling Of Dna Translocation In Bio-Functionalized Nanopores With Applications In Gene Sequencing, Abhijit Ramachandran

Bioengineering Theses - Archive

The human genome project which was completed in 2003 took more than 12 years to complete at a cost of $2.7 billion. The advancement in technologies in the next five years led to the same feat being achieved in 5 months with a total cost of $1.5 million. Micro-fabrication technology has now made it possible miniaturize to micro- and nanofluidic devices for biochemical analysis. Solid-state nanopore based molecular analysis provides the potential to characterize and sequence DNA, based on the signature of the ionic current measured. A major challenge in using solid-state nanopores for DNA detection and sequencing is the …

Go to article

Development Of Brownfield Database Using Gis, Jubair Hossain Jan 2009

Development Of Brownfield Database Using Gis, Jubair Hossain

Civil Engineering Theses - Archive

Brownfields are abandoned, idled or underutilized industrial or commercial sites where expansion or redevelopment is complicated by actual or perceived environmental contamination. Brownfields may be as small as a vacant city lot or as large as an abandoned manufacturing facility occupying several hundred acres. The extent of contamination encountered at brownfield sites may range from minor surface debris to extensive, dangerous soil and ground-water contamination. Concerning the communities in which brownfields are located, redevelopment may improve community appearance and image, relieve associated health and environmental concerns and produce a beneficial economic effect through increased property values and employment opportunities.The overall …

Go to article

Modeling And Characterization Of Rf Mems Resonators, Najla S. Khan Jan 2009

Modeling And Characterization Of Rf Mems Resonators, Najla S. Khan

Electrical Engineering Theses - Archive

Over the past decade, a multitude of micro-electro-mechanical (MEMS) devices have been developed and commercialized due to their low power consumption, reduced cost and compact size. In recent years, significant advancements in technology have extended MEMS development towards radio frequency, microwave and millimeter wave applications. The need for micro-machining and MEMS based systems for RF and microwave applications arises from the inherent limitations of existing RF devices. Motivation for incorporating MEMS based fabrication technologies into microwave and millimeter wave systems can be classified into three main categories: precision, system integration and performance. As frequency increases, the size of RF components …

Go to article

Preparation Of Pyramidal Zinc Oxide Particle As An Antireflective Coating For Application In Solar Cell., Amit Banik Jan 2009

Preparation Of Pyramidal Zinc Oxide Particle As An Antireflective Coating For Application In Solar Cell., Amit Banik

Electrical Engineering Theses - Archive

There is a lot of research going on in the field of solar cell to increase the energy conversion efficiency. Many new methods have been implemented and new processes and materials have been suggested in the recent past. This research deals with the preparation of pyramidal structure zinc oxide particles as an antireflective coating for polycrystalline and non-silicon solar cell. The process involved a cost effective method that is electrochemical deposition of zinc oxide on silicon mold. The mold, inverted pyramid, is prepared by photolithographic process PECVD silicon nitride as the hard mask and wet etching and then electrochemical deposition …

Go to article

Design Of Microwave Non-Redundant Band-Pass Filter Using Microstrip And Edge Coupled Sections, Vinoj Vijayan Pillai Jan 2009

Design Of Microwave Non-Redundant Band-Pass Filter Using Microstrip And Edge Coupled Sections, Vinoj Vijayan Pillai

Electrical Engineering Theses - Archive

Microwave filler design using the non-redundant method relies on using the quarter wave Unit Elements (U.E's) to create a complex pole and hence augment the filter skirt response as against the redundant method wherein the U.E's do not contribute towards the filtering action. Filters realized using this method may have series high impedance capacitors, which are not realizable in planar microstrip technology. This thesis proposes a method to integrate microstrip transmission line and coupled line elements to circumvent the problem of realizing series capacitance. The total number of transmission line elements required to realize the filter is the minimum number …

Go to article

Performance Analysis Of Space - Time Block Coded Multiple Antenna Systems, Varsha Rao Bolar Jan 2009

Performance Analysis Of Space - Time Block Coded Multiple Antenna Systems, Varsha Rao Bolar

Electrical Engineering Theses - Archive

Multiple input and multiple output(MIMO) communications are seen as key technology to achieve high data rates for next generation of air interfaces like Wifi, WiMAX, and 3GPP-LTE, because of the spatial dimension complementing time (TDM), frequency (FDM), and code (CDM) multiple access technologies. MIMO technology has many captivating characteristics such as, it offers significant increases in data throughput and link range without additional bandwidth or transmit power. It achieves this by higher spectral efficiency (more bits per second per hertz of bandwidth) and diversity (reduced fading). Because of these properties, MIMO is a current theme of international wireless research. Diversity …

Go to article

Maternal Bodies, Ojibwe Histories And Materiality In The Novels And Memoirs Of Louise Erdrich, Jodi Bain Mccormack Jan 2009

Maternal Bodies, Ojibwe Histories And Materiality In The Novels And Memoirs Of Louise Erdrich, Jodi Bain Mccormack

English Theses - Archive

This thesis examines uterine metaphors and birthing scenes in the novels and memoirs of Louise Erdrich. Specifically, it examines convergences between these images and material feminisms, as well as Ojibwe spirituality and ontology. Within these images and metaphors, Erdrich critiques personal, family and gender boundaries and also the nature/culture divide and even ideas which separate birth and death. It begins with actual birthing scenes in her texts, then moves to metaphors and similes which birth or maternity is implied. This thesis uses feminist theories by Alaimo, Harraway, Hekman and Irigaray and also science study scholars like Bruno Latour and Andrew …

Go to article

A Multi-Functional Essay Prompt For State Mandated Assessments, Allen Anthony Glick Jan 2009

A Multi-Functional Essay Prompt For State Mandated Assessments, Allen Anthony Glick

English Theses - Archive

A State-mandated assessment of high school English composition skills can be a trying experience for sophomore basic writers. Because students must construct a text-supported argument around the State's choice of theme, it is of the utmost importance that the assessors present for thematic considerations a properly identified subject that is universally accessible to all sophomores. Through the analysis of an essay prompt used in a benchmark exam from the Texas Assessment of Knowledge and Skills--a sentence in which I discern both ambiguity and inaccessibility--this thesis hopefully sheds light on considerations that should be made in the construction of an effective …

Go to article

At Play In Her Clearing: Centering The Personal Experience Of Disability Within Irigarayan Philsophy, Katherine Elaine Wallis Jan 2009

At Play In Her Clearing: Centering The Personal Experience Of Disability Within Irigarayan Philsophy, Katherine Elaine Wallis

English Theses - Archive

From a theoretical perspective, the disabled woman can be seen as `doubly othered' within patriarchal culture. Because the disabled woman faces this dual otherness, she is barred from both masculine language and able-bodied culture. By looking at the memoirs of three women who became disabled in adulthood: Nancy Mairs', Waist-High in the World: A Life Among the Nondisabled, Simi Linton's My Body Politic, and finally Janet Price and Margrit Shildrick's critical article "Bodies Together: Touch, Ethics and Disability," I will ask the question: How can the disabled woman gain a new sense of embodiment and move beyond the able/disabled binary? …

Go to article

A Portable Biotelemeter For Batteryless Gerd Sensors, Sandeep Battula Jan 2009

A Portable Biotelemeter For Batteryless Gerd Sensors, Sandeep Battula

Electrical Engineering Theses - Archive

In many medical problems, a continuous monitoring of the disease in vivo is essential to prevent further deterioration of health. The monitoring usually exceeds 24 hours. With the help of current advanced technologies, micro-medical devices are built to sense the internal physiological conditions in patients. Telemetry is used to transmit information to an external monitoring device. For the convenience and comfort of the patient, these monitoring systems should have low power consumption and be portable. This work discusses the design of a low power portable biotelemeter for batteryless Gastro esophageal reflux disease (GERD) sensors which can detect acid and non-acid …

Go to article

Analysis And Modeling Of Self Heating In Silicon Germanium Heterojunction Bipolar Transistors, Kevin Bastin Jan 2009

Analysis And Modeling Of Self Heating In Silicon Germanium Heterojunction Bipolar Transistors, Kevin Bastin

Electrical Engineering Theses - Archive

Silicon Germanium (SiGe) hetero junction bipolar transistors (HBTs) have established itself as strong technology contender for a host of circuit applications including analog, mixed signal and Radio Frequency (RF). Due to the effect of technology scaling, self heating plays a significant role in the performance of SiGe HBTs. This thesis paper does an extensive analysis on the effect of self heating and uses different methods to extract the self heating parameters. An expression for thermal resistance considering thermal conductivity as a function of temperature is derived. Also a method to convert a multi pole thermal model to a single pole …

Go to article

Preliminary Investigation Of Six Degree Of Freedom Human Steadiness Measurement Using A Performance Theory Framework, Jonathan Daniel Armstrong Jan 2009

Preliminary Investigation Of Six Degree Of Freedom Human Steadiness Measurement Using A Performance Theory Framework, Jonathan Daniel Armstrong

Electrical Engineering Theses - Archive

Tremor is an undesired oscillatory movement of a body segment which limits a person's ability to accomplish tasks. A conceptually sound, single number measure reflecting steadiness (defined as the inverse of tremor) of body segment is desired. Technology has advanced to make six degree of freedom (DOF) characterization of motion feasible, but the challenge remains regarding how to process time series data from multiple DOFs to achieve the single number composite measure. Previous conceptual work has applied General Systems Performance Theory (GSPT) to this problem. This thesis reports the investigation of steadiness composite measure formation. Three composite formation candidates were …

Go to article

Analysis Of The Spatial Correlation Measurements For The Multiple Input Multiple Output (Mimo) Channel Using Anechoic Chamber Measurement Methodologies To Evaluate Over-The-Air (Ota) Testing Techniques, Digvijay Arjunrao Jadhav Jan 2009

Analysis Of The Spatial Correlation Measurements For The Multiple Input Multiple Output (Mimo) Channel Using Anechoic Chamber Measurement Methodologies To Evaluate Over-The-Air (Ota) Testing Techniques, Digvijay Arjunrao Jadhav

Electrical Engineering Theses - Archive

There are numerous constraints in defining an Over-The-Air (OTA) test due to the practical hardware restrictions present in an anechoic chamber. It is necessary to evaluate the test signals used in OTA testing to verify that the real world multipath propagation can be recreated for OTA testing inside an anechoic chamber. The objective of this measurement is to check whether the parameter, `Spatial Correlation' can be used to compare OTA test signals used in the MIMO OTA testing. Spatial Correlation has prime importance from the point of view of MIMO channel modeling. It's a key factor in determining the MIMO …

Go to article

Error Concealment Techniques In H.264/Avc For Video Transmission Over Wireless Networks, Vineeth Shetty Kolkeri Jan 2009

Error Concealment Techniques In H.264/Avc For Video Transmission Over Wireless Networks, Vineeth Shetty Kolkeri

Electrical Engineering Theses - Archive

Several error concealment methods are applied to H.264/AVC (Advanced Video Coding) baseline profile such that the decoded video is error free. The error concealment techniques are implemented both in the spatial and temporal domains. The original and error concealment video sequences are compared in terms of MSE (Mean Square Error), PSNR (Peak-to-peak Signal to Noise Ratio) and SSIM (Structural Similarity Index Metric). This comparision has demonstrated that the error concealment methods are very effective in improving the visual quality. Implementation complexity also has been considered as the video transmission in baseline profile is meant for wireless networks.

Go to article

An Efficient Piecewise Linear Network, Rohit Rawat Jan 2009

An Efficient Piecewise Linear Network, Rohit Rawat

Electrical Engineering Theses - Archive

A Piecewise Linear Network (PLN) is a local network that offers the accuracy of higher order networks and the Multi Layer Perceptron (MLP), with the computational simplicity of linear networks. A method to design a PLN is demonstrated and several clustering algorithms, used in the design procedure, are compared. The performance of the Self Organizing Map (SOM) clustering algorithm has been found to be slightly better than the other clustering methods. Methods to determine the appropriate threshold in the Sequential Leader algorithm have been studied. A binary search based approach was found to be the most efficient in terms of …

Go to article

A Frequency Domain Approach For Time-Reversal Of Microwave Impulses, Shaoshu Sha Jan 2009

A Frequency Domain Approach For Time-Reversal Of Microwave Impulses, Shaoshu Sha

Electrical Engineering Theses - Archive

In this thesis, a compact and low-cost electronic circuit system is designed for time-reversal of microwave impulses with nanosecond and sub-nanosecond temporal durations. A frequency domain approach is adopted in order to avoid high sampling rate in time. The proposed system obtains the discrete spectra of input impulses first, then realizes time-reversal in frequency domain, and finally synthesizes the time-reversed impulses using discrete continuous wave elements. It is composed of commercially available circuits including oscillators, mixers/multipliers, band-pass-filters, amplifiers, and switches, hence embodies low-cost system-on-chip implementation. The proposed time-reversal circuit's performance is verified by Advanced Design System (ADS) simulations, with most …

Go to article

Utilizing Physical Layer Information To Improve Rfid Tag Identification, Rushikesh Shree Khasgiwale Jan 2009

Utilizing Physical Layer Information To Improve Rfid Tag Identification, Rushikesh Shree Khasgiwale

Electrical Engineering Theses - Archive

Radio-frequency identification (RFID) systems are designed for fast and accurate identification of multiple RFID tags. Their performance depends on the effective detection andresolution of communication collisions caused by the presence of multiple tags in the reader's field. Present RFID protocols do not rely upon the received physical waveform obtainedduring a collision for either collision resolution or improved identification rate. This signal contains important information that is often ignored or otherwise discarded.In this thesis I analyze the physical layer information extracted from a collision waveform from the ISO-18000-6C protocol and identifypotentially performance enhancing information contained therein. Utilization of this information to …

Go to article

Athena - Rfid Tag Metrics, Amit Jain Jan 2009

Athena - Rfid Tag Metrics, Amit Jain

Electrical Engineering Theses - Archive

In this thesis we have developed a Metric which is a numerical value representing the readability and performance characteristic of an RFID tagged object. The metric value ranges from 0 -100 and is given a unit of Athena, where a higher number specifies a better performing tag. The major parameters on which the metric value depends are frequency at which RFID system is working, transmitted power by the reader, and the received signal strength from the tag. All the parameters used for the Metric evaluation are well within the FCC regulations for passive UHF RFID system. Choosing the best performing …

Go to article

First Prev Next Last