Digital Commons Network^™

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa

Journal of Materials Exploration and Findings

This study investigates the application of red palm oil (RPO) as an alternative vegetable oil resource to substitute petroleum-based plasticizers, which have environmental and health concerns, in carbon black (CB)-filled SSBR/BR tire tread compounds. The plasticizing effects of RPO were thoroughly evaluated by comparing them with a commercial bio-based plasticizer, Epoxidized Soybean Oil (ESBO), and two safer petroleum-based oils, Naphthenic Oil (NYNAS) and Treated Distillate Aromatic Extract (TDAE). The initial investigation shows that fatty acid composition is imposing regarding the plasticizing effect. The higher unsaturated fatty acid content in RPO than in ESBO improved tensile strength and degraded rolling resistance …

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa

Journal of Materials Exploration and Findings

A modified eye bolt from the David Arm Manhole Storage Tank underwent thorough metallurgical study due to the consequences of the bolt's malfunction during operation. Safety issues arose when the manhole door detached during operation. The mechanical testing and chemical composition analysis of the bolts indicated they were manufactured from an ASTM A193 Grade B7 material used for high-temperature bolting. This material did not conform to the engineering drawing, which mentioned SA 563A, which is about nuts, not bolts. This contradiction clearly shows that the eye bolt which was installed does not conform to the intended design. Welded connections of …

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih

Journal of Materials Exploration and Findings

Peat water is a surface water source widely used by people in swampy and lowland areas, but it has poor quality characteristics such as high organic matter content, low pH, and dissolved metal levels such as iron that exceed the threshold. These conditions can cause health problems and reduce the quality of clean water so that effective treatment technology is needed. This study aims to analyze the effectiveness of ultrafiltration membranes made from chitosan from shrimp shell waste in rejecting iron (Fe) and organic substances in peat water, and to determine the effect of pressure on separation performance. This study …

Website: Home, Zhiqu Lu, Likun Zhang, Lei Cao

Gulf Research Program Data Sets

No abstract provided.

Website: Latest Results, Zhiqu Lu, Likun Zhang, Lei Cao

Gulf Research Program Data Sets

No abstract provided.

Website: News And Events, Zhiqu Lu, Likun Zhang, Lei Cao

Gulf Research Program Data Sets

No abstract provided.

Developing Field And Spaceflight Microscopy, Nikki Johnston

Dissertations and Theses

Designing for spaceflight favors the reduction of unnecessary features and cost-cutting, whether thisbe computation, hardware, or procedure. Resources are spent toward fortification and mission success over convenience. Such design goals paired with the relatively smaller budgets of academia lead us to do as much as we can in-house and use open-source as much as we can without compromising mission success. We also believe that thoroughly testing technology in extreme environments on earth is necessary for the success of a flight instrument. We focus on microscopy for life detection. I have spent my time here learning methods of hand-building microscopes to …

Evaluating A Dual-Beacon Hartmann Turbulence Profiling Technique Using Wave Optics Simulations, Benjamin C. Wilson, Matthew Kalensky, Santasri Bose-Pillai, Jack E. Mccrae

Faculty Publications

Resolving how optical turbulence varies along a propagation path remains a key challenge for designers of free-space optical propagation systems. Instruments such as scintillometers and differential image motion monitors are commonly used, but only provide path-integrated turbulence estimates. Point sensors provide localized estimates of turbulence strength and can be used to generate path-resolved profiles when an array of point sensors are distributed along the optical path. However, this approach can be costly and complex to deploy in certain environments. Alternatively, a single point sensor can be mounted on a mobile platform that collects data while traversing the optical path, although …

Electronic Structure Discretization And Compression Using Diagonal Basis Sets, Casey Lee Dowdle

Dartmouth College Ph.D Dissertations

Numerically solving the electronic structure problem is a fundamentally difficult problem due to the exponential growth in the dimension of the Hilbert space as the system size increases. In order to solve problems at a chemically relevant accuracy, both the choice of basis set and numerical method are important factors that are intrinsically connected.

In this thesis, we study the discretization and resulting compression of electronic Hamiltonians using diagonal basis sets. A diagonal basis set approximately diagonalizes the matrix and tensor representations of the one- and two-body potentials. This can reduce storage, simplify matrix-vector products, and lower the complexity of …

Simulation And Delivery Of The Next Stage Of The Cebra Array, Hanna J. Ross

Physics and Astronomy Summer Fellows

The CeBrA detector array at Florida State University’s Fox Lab uses a collection of CeBr₃ scintillator detectors to collect gamma rays emitted by excited nuclear reaction products to gain information about nuclear energy levels of a nucleus of interest. When the array was commissioned, it contained five individual detectors. Expanding the array maximizes its efficiency and accuracy. In collaboration with FSU, Ursinus College has purchased nine additional detectors that will be added to the array at the end of the summer. While the detectors are still in our possession, we are working to create an accurate simulation model of …

Behavior Of Magnetic Reconnection In The Relativistic Regime Under The Presence Of Shear Flows And Guide Field, Sarah Peery

Dartmouth College Ph.D Dissertations

Magnetic Reconnection is a ubiquitous phenomenon in plasma, where magnetic energy is released into plasma thermal and kinetic energy through the rearrangement of magnetic topology. In this study we derive fluid scaling models to predict the steady state and onset behavior of magnetic reconnection in the highly magnetized (relativistic) regime, in the presence of plasma shear flows and a (out-of-plane) guide field. We use 2.5D kinetic particle-in-cell simulations to motivate and validate these models. We find that, similar to the non-relativistic regime, shear flows parallel to the reconnecting magnetic field will delay reconnection onset and slow outflow jets. They can …

Development Of Robust Ratio Linear Fitting Method Of Temperature And Emissivity Separation For High-Temperature Data, Mitchell Manzardo, Michael L. Dexter, Shannon R. Young, John Bowlan, Anthony L. Franz

Faculty Publications

Accurate temperature and emissivity separation from thermal infrared radiance is essential for characterizing materials under high-temperature laboratory conditions. Existing temperature and emissivity separation methods have largely been developed for multispectral remote sensing applications, where long atmospheric path lengths require extensive atmospheric compensation. In contrast, the current work considers hyperspectral laboratory measurements acquired over a short optical path, where atmospheric effects are comparatively small but increased measurement uncertainty remains within portions of the measured spectrum. The ABB MR304 FTIR spectrometer used in this study exhibits reduced optical transmission below approximately 2.5 μm, producing increased measurement uncertainty within the spectral region containing …

Palmnet: Confidence-Calibrated Edge-Cloud Ai For Field Diagnosis Of Date Palm Diseases, Muntadher Kareem, Raed Majeed

Karbala International Journal of Modern Science

Date palm (Phoenix dactylifera L.) is a cornerstone crop for Iraq and the wider MENA region, yet reliable in-field diagnosis of leaf disorders remains slow, labour-intensive, and constrained by a limited pool of agronomists. This paper presents PalmNet, a full-stack diagnostic system that classifies nine leaf conditions through a calibrated edge-cloud framework. The system is developed and evaluated on a public dataset of 3,089 field images spanning the nine classes, using a 70/15/15 stratified split. A ShuffleNetV2 student network, distilled from a ConvNeXt-Tiny teacher, is deployed on two complementary edge endpoints: a Raspberry Pi Zero 2 W field station …

Scattering Phase Shift In Quantum Mechanics On Quantum Computers: Non-Hermitian Systems And Imaginary-Time Simulations, Peng Guo, Paul Levan, Frank Lee, Yong Zhao

Research & Publications

To overcome the fast oscillatory behavior of correlation functions for extracting scattering phase shift in real-time quantum simulations encountered in the work of Guo et al. [Phys. Rev. D 113, 054512 (2026)], we propose and test two solutions in the present work. One is to simulate Hermitian systems in imaginary time, and the other is to simulate non-Hermitian systems in real time. We demonstrate that both approaches lead to the problem of nonunitary quantum evolution that can be solved by combining two quantum algorithms: block encoding and Hadamard test. The combined quantum algorithm does not require midcircuit …

Machine Learning Applications To Physical Processes, William Charles

Arts & Sciences Graduate Student Theses and Dissertations

This thesis demonstrates how machine learning techniques can solve computationally challenging problems across diverse areas of physics, from high-energy astrophysics to condensed matter systems, accelerating traditional computation. My first contribution addresses the computational expense of Monte Carlo calculations for radiative processes in relativistic plasmas. I develop a neural network sampling method that enables fast sampling from an arbitrary probability density, and demonstrate the method on inverse Compton scattering, achieving a speedup of up to an order of magnitude beyond standard methods. My second contribution addresses the structure and radiation of neutron star magnetospheres. I use physics-informed neural networks to model …

X-Ray Emission From V1674 Her (Nova Her 2021) And Characterization Of Cebr3 Detectors For Gamma-Ray Spectrometry, Tekeba Olbemo

Arts & Sciences Graduate Student Theses and Dissertations

Novae are thermonuclear explosions on the surface of the white dwarf in a close binary system. They are multi-wavelength transients emitting across the electromagnetic spectrum from radio to gamma-rays. This thesis primarily focuses on the X-ray emission from one particular nova, V1674 Her. V1674 Her (Nova Her 2021) is known for its ultra-fast decline time of ��2 ∼ 1 day. This under normal circumstances implies massive white dwarf potentially approaching the Chandrasekhar limit. We test this for V1674 Her by measuring its mass via X-ray spectroscopy method. The method calculates X-ray emission from physically motivated model of post-shock accretion column …

Characterization Of An Ambe Tagged Neutron Source For A 30-Ton Wbls Detector, Rylee Grover

Discovery Day - Daytona Beach

Understanding the detection capabilities of water-based liquid scintillator (WbLS) is critical for its deployment in next-generation neutrino detectors such as THEIA and Phase II of the Deep Underground Neutrino Experiment (DUNE). This study focuses on the characterization and alignment testing of an Americium-Beryllium (AmBe) radioactive neutron source. We plan to dope the 30-ton WbLS detector at Brookhaven National Laboratory (BNL) with Gadolinium (Gd) to improve neutron detection capabilities. This will be tested by the implementation of an AmBe source as a calibration metric. The AmBe source emits neutrons coincident with a 4.4 MeV gamma ray, making it possible to perform …

Numerical Modeling Of Thermo-Poroelasticity Using Finite Element Method, Maya Mckean

Discovery Day - Daytona Beach

We propose a numerical method for solving and modeling thermo-poroelasticity problems using a finite element formulation. Thermo-poroelasticity models describe the coupled interaction between mechanical deformation, fluid flow, and heat transfer in specific materials or environments over time. These models demonstrate the evolution of displacement, pressure, and temperature; we compute these fields in this work using backward Euler time discretization and Enriched Galerkin finite element spatial discretization. For these computations we used FreeFEM, a partial differential equation solver that uses the finite element method, which produced our numerical results. We then compared these values with the expected analytical solution. This was …

M.O.D.U.S. Modular Optical Design Using Specular Film, Mario Gutierrez, Robert Thibodeau, Emma Show, Desiree Robinson, Lingyuan Meng, Sean Martin, Conner Beeson

Discovery Day - Daytona Beach

High-quality parabolic mirrors, which are vital components in reflecting telescopes, are typically bulky, costly, and highly fragile. This experiment explores the feasibility of using specular Class B Mylar as an unconventional, lightweight, and cost-effective alternative. This approach could enable new telescope designs by greatly reducing weight and manufacturing expenses, while also opening options for potential adaptability.   This approach involves using Mylar, a flexible, reflective style of plastic. The mylar is formed into a concave mirror by stretching a sheet over a chamber and depressurizing one side to force the sheet into the necessary curved shape. Multiple designs are being created …

From Code To Cube: Interactive Fluid Simulation With Real Time Motion Control, Dominic Ziccardi, Carter Groezinger

Discovery Day - Daytona Beach

This research project explores the use of FluidX3D, an open-source lattice Boltzmann method (LBM) solver, to simulate fluid behavior within a three-dimensional cube container. The system supports both standard water models and rheoscopic fluid visualization, allowing detailed observation of complex flow dynamics in real time. The simulation accurately represents fluid motion, gravity-driven behavior, and rotational response within a bounded cubic domain. The longterm objective is to extend this digital simulation into a physical installation consisting of six synchronized square displays arranged to form a cube. This configuration will create a volumetric illusion of fluid occupying a tangible, handheld structure. An …

The Motion Of A Falling Object Under Linear Drag And How Differential Equations Can Be Used To Find It, Lukas Estrella

Discovery Day - Daytona Beach

This project, "The Motion of a Falling Object Under Linear Drag and How Differential Equations Can Be Used To Find It," investigates the motion of a falling object subject to air resistance through a combination of mathematical modeling and fundamental physical principles. The analysis is grounded in Newton’s second law, which yields a differential equation describing the forces acting on the object. Assuming a linear drag model, in which the resistive force is proportional to velocity, the governing equation reduces to a first-order ordinary differential equation for velocity. This equation is solved using the integrating factor method, yielding an explicit …

String-Of-Pearls Measurements Of Supersonic Plasma Jets Using Magnetospheric Multiscale Satellites, Amelia Koth

Discovery Day - Daytona Beach

High-energy supersonic plasma jets form when the solar wind, which is a flow of charged particles from the Sun, slows down as it encounters Earth’s magnetic shield. Occasionally, the solar wind remains at supersonic speeds as it enters this region. This forms plasma jets that propagate toward Earth; these jets can carry strong magnetic fields, drive magnetic reconnection, and potentially initiate substorms that lead to auroral activity.   Previously studied plasma jets occurred when the interplanetary magnetic field (IMF) points southward. In contrast, this study focuses on northward IMF conditions, which are less understood, yet still capable of producing supersonic jets. …

Extending The Essentially Entropic Lattice Boltzmann Method To Three-Dimensional Turbulent Flows, Michael Derderian

Discovery Day - Daytona Beach

The Entropic Lattice Boltzmann Method (EELBM) has demonstrated strong numerical stability and accuracy for two-dimensional simulations, particularly at higher resolutions where the entropic formulation introduces only minimal stabilizing turbulent viscosity and eventually converges to the Lattice Bhatnagar–Gross–Krook (LBGK) formulation. This built-in stabilization can be interpreted as an implicit large-eddy simulation (LES) model, allowing EELBM to capture complex turbulent behavior without requiring explicit subgrid-scale closures. While these advantages have been thoroughly validated in 2D, understanding how the entropic constraint regulates dissipation in three dimensions is essential for assessing EELBM’s suitability for practical, turbulence-dominated applications. This work focuses on the development and …

Multi-Dimensional Particle-In-Cell With Monte Carlo Collisions (Pic-Mcc) Simulation For Visualizing Plasma Flow And Secondary Ionization In Constricted-Anode Geometries, Parth Thakar

Discovery Day - Daytona Beach

Constricted-anode plasma sources generate locally intensified electric fields that enhance ionization near the anode, making them valuable in propulsion and laboratory plasma systems. However, the narrow geometry produces complex charge accumulation and secondary ionization effects that remain difficult to measure experimentally. To address this challenge, our research develops and applies a multi-dimensional Particle-in-Cell with Monte Carlo Collisions (PIC-MCC) simulation of a DC discharge in 1-D, 2-D, and 3-D configurations that model a constricted-anode device. PIC-MCC is a first-principles method that tracks electrons and ions individually while computing self-consistent electric fields and incorporating energy-dependent collision processes. This approach enables direct visualization …

Differentiating The Impossible: Feynman's Trick In Applications Of Modern Physics, Yaohua Zhao

Discovery Day - Daytona Beach

We discuss Feynman’s method of differentiating with respect to a parameter inside an integral and explore its significance on selective topics of modern physics. This powerful technique allows us to integrate functions that may seem impossible. Depending on the underlying parameters, the Feynman method becomes a unifying framework that connects mathematical concepts to many parameter-dependent equations in modern physics. In statistical mechanics, this appears directly in the partition function, where derivatives with respect to temperature-related parameters yield thermodynamic quantities such as internal energy and heat capacity; this demonstrates how parameter dependence gives rise to macroscopic behaviors observable at a larger …

Bounded Thunderstorm Tracking Of Lightning Events With Muon Detection, Skylar Wardlaw, Ainsley Helgerson, Maria Kaminska, Logan Velvet, Georgii Dubrov, Jackson Stewart, Aaron Jung, Nathaniel O’Hara, Amelia Koth, Nash Mcleod, Emaleth Wyckoff

Discovery Day - Daytona Beach

The muon is a high-energy particle that can be produced by cosmic rays and trigger upper-atmospheric particle cascades and energetic processes. It has been hypothesized that such cascades are at the onset of lightning. As such, muons serve as a valuable probe for investigating the underlying mechanisms of its initiation, whose full governing dynamics remain vastly unknown despite extensive research. Traditional approaches to lightning research involve simulations and observations of the discharge itself, but the role of high-energy particle interactions has yet to be fully constrained. The CosmicWatch Muon Detector design enables the detection of atmospheric muons through scintillation events, …

Effect Of Anode Size On The Properties Of Constricted Hollow Anode Pulsed Plasma Source, Nirav Patel, Garret Seckinger

Discovery Day - Daytona Beach

With the advent of ion thrusters, burns requiring large velocity changes can be performed with a fraction of the propellant required by traditional chemical rocket engines. However, current ion thrusters produce thrust in the order of millinewtons and thus cannot be viable for launching vehicles or burns requiring velocity changes in a small amount of time. Furthermore, current ion thrusters experience grid and component erosion, where the two grids at the termination of the nozzle slowly erode due to particle impact, and the hot electrodes degrade due to high thermal load. This limits the life of ion engines, which require …

A Feedback Loop Control To Automate Cold Atmospheric Pressure Plasma Based Additive Manufacturing, Arineh Shahbazi

Discovery Day - Daytona Beach

Currently, nanoparticle annealing based additive manufacturing process requires high temperatures, making them unsuitable for a broad range of applications. By lowering the temperature and developing a process to use Cold Atmospheric Pressure Plasma (CAPP) for annealing, many more doors are opened to a wide range of materials, films, and environments for space, communication, and microelectronics. CAPP-based additive manufacturing technology is continually evolving, making projects like nanoparticle annealing more feasible. In this work, we designed a CAPP jet printer assembly consisting of a 0.25-inch outer diameter glass tube connected to a 3D printing nozzle. The flow of Argon gas in the …

Navier Stokes Pressure Drop Derivation, Brayden Benedetti, Gedaliah Dimbert, Jaden Turobiner

Discovery Day - Daytona Beach

Accurate prediction of pressure losses in propellant and fluid feed systems is essential for reliable design and operation of aerospace and industrial flow networks. This project presents a systematic derivation of a practical pressure drop calculator for a feed system using isopropyl alcohol, beginning from the fundamental conservation laws and culminating in an engineering-level computational model. Starting with the differential form of the Navier–Stokes equations for incompressible flow, the governing equations are simplified through a series of physically justified assumptions, including steady-state flow, negligible body forces, and fully developed internal flow within circular piping. The resulting momentum balance is reduced …

Application Of Navier Stokes In Cfd, Hayden Kerkhoff, Gavin Palmer, Garret Seckinger

Discovery Day - Daytona Beach

This project investigates the use of 2-Dimensional Computational Fluid Dynamics (CFD) to analyze aerodynamic behavior, then compare data with the numerical solution of the Navier–Stokes equations run by MATLAB. By leveraging open‑source and possible industry CFD platforms—including OpenFOAM and commercial solvers such as ANSYS Fluent and Inventor Professional—the study evaluates how computational methods simulate, optimize, and predict key aerodynamic quantities such as lift, drag, stall angle, and Reynolds number.   The project focuses on modeling an airflow over specific parameters, such as different angles of attacks and ISA Atmospheric Conditions. Parametric variations in density, angle of attack, chord length, and temperature …