Digital Commons Network^™

Development Of Holographic Optical Elements For Use In Wound Monitoring, Pamela Stoeva, Tatsiana Mikulchyk, Brian Rogers, M. Oubaha, Suzanne Martin, Dervil Cody, M.A. Ferrara, G. Coppola, Izabela Naydenova

Conference Papers

Wounds that fail to heal impact the quality of life of 2.5 % of the total population. The costs of chronic wound care will reach $15–22 billion by 2024. These alarming statistics reveal the financial strain for both the medical industry and society. A solution can be found in compact and accessible sensors that offer real-time analysis of the wound site, facilitating continuous monitoring and immediate treatment, if required. Benefits of these sensors include reduction of cost and can extend the reach of healthcare to remote areas. The progression of a wound site can be closely monitored with holographic optical …

Optical Design Study Of A High-Resolution Spectrograph Utilizing Photonic Lanterns For A Large Fiber Array Telescope, Richard D'Alo

Graduate Thesis and Dissertation 2023-2024

Large area fiber array telescopes are a relatively modern development in the long history of telescope design and effectively create a single large equivalent aperture by combining many smaller unit telescopes at a fraction of the cost. In this study a spectrograph optical design is demonstrated that utilizes photonic lanterns in the input fiber feed for the Large Fiber Array Spectroscopic Telescope (LFAST) design concept, where photonic lanterns provide a simplified approach to the fiber feed originally proposed for LFAST. Conservation of etendue is applied to derive the relationship between slit size and photonic lantern ratio, and classical echelle spectrograph …

Another Angle On Perspective, John Adam

Mathematics & Statistics Faculty Publications

No abstract provided.

"Density" Of Light And Pi, John Adam

Mathematics & Statistics Faculty Publications

Question 1: What is the linear “density” of the spectral range on the ceiling? The crown molding is common for an older (circa 1925) house.

Question 2: The glass shown is a standard 16-oz. water glass engraved with many digits of pi. (The dimensions appear somewhat distorted because of the camera angle chosen to enhance the contrast of the numerals against the dark background.)

A Theoretical Study Of Elementary Processes In Interstellar Plasma, Joshua Forer

Graduate Thesis and Dissertation 2023-2024

Interstellar plasma — interstellar clouds in particular — play an important role in determining the structure and evolution of galaxies. Understanding the time evolution of such plasmas requires knowledge of the chemical processes that drive their dynamics. Two processes are studied in this dissertation: radiative electron attachment (REA) via dipole-bound states (DBSs) and dissociative recombination (DR). Of the several hundred molecules detected in the interstellar medium, only eight anions have been detected: CN-, C3N-, C5N-, C7N-, C4H-, C6H-, C8H-, and C10H-. Their production mechanism is not well known; REA was suggested as a possible formation pathway, but previous theoretical studies …

Development Of Advanced Germanium Detectors For Rare Event Physics, Sanjay Bhattarai

Dissertations and Theses

High Purity Germanium (HPGe) detectors are widely used in rare-event physics searches for dark matter, neutrinoless double-beta decay, and solar neutrinos. This dissertation fo- cuses on improving crystal quality by controlling the impurity concentration, dislocation density, and growth environment as well as developing advanced Ge detectors for various physics applications. The dissertation presents experimental investigations of electrical conduction mechanisms in p-type amorphous germanium (a-Ge), which is used as an elec- trical contact material in HPGe detectors. By measuring the surface leakage current from three high-purity planar Ge detectors, we determine the localization length and hopping parameters in a-Ge. The dissertation …

Development Of Novel Hpge Detector For Rare Event Physics, Mathbar Singh Raut

Dissertations and Theses

This dissertation focuses on the enhancement of crystal quality in High Purity Germanium (HPGe) detectors, which play a crucial role in rare-event physics investigations such as dark matter detection, neutrinoless double-beta decay, geo-neutrinos, and solar neutrinos. The primary objective of this research is to improve crystal quality by controlling impurity concentration, dislocation density, and growth environment. Additionally, the development of advanced Ge detectors for various physics applications is explored. One significant aspect examined in this dissertation is the investigation of systematic errors associated with the Hall effect system. The goal is to identify a reliable technique that minimizes the systematic …

Background Discrimination Of A Neutrino Detector With Dense Neural Networks, Perry Siehien

Dissertations and Theses

Neutrinos are subatomic particles that weakly interact with matter due to their neutral charge and small cross section. Detectors that search for neutrinos require sensitive instrumentation, which makes them susceptible to various background sources such as gamma rays. Additionally, coherent elastic neutrino-nucleus scattering events, or CEvNS, are the weakest neutrino interactions at 1-25 keV, making them exceptionally difficult to observe. To understand the physics of CEvNS events within the detector material, the recoil signatures of relevant interactions must be determined. Traditional analysis methods are effective, but cannot be applied to energies below 50 keV, due to the overlap of discrimination …

Fabrication And Characterisation Of Large Area, Uniform And Controllable Surface Relief Patterns In Photopolymer Material, Owen Kearney, Izabela Naydenova

Conference Papers

As the risk of antibiotic resistant pathogens increases, development of convenient point of care devices is essential. Such devices would help avoid infection – ensure cleanliness of environments and assist in bacteria analysis. The ultimate aim of the research presented here is to develop a compact, cost effective, easy to use optical device which is capable of detecting and quantifying bacteria in an aqueous sample. The surface relief patterns have a dual role, they provide a diffracted light signal, and control the adhesion of the bacteria to the surface. The strength of the diffracted signal is expected to provide a …

Azimuthal Anisotropy Measurement Of (Multi)Strange Hadrons In Au+Au Collisions At √S Nn = 54.4 Gev, Star Collaboration

Physics and Astronomy Faculty Publications

Azimuthal anisotropy of produced particles is one of the most important observables used to access the collective properties of the expanding medium created in relativistic heavy-ion collisions. In this paper, we present second (v2) and third (v3) order azimuthal anisotropies of KS0, φ, Λ, Ξ, and ω at midrapidity (|y|< 1) in Au+Au collisions at sNN=54.4 GeV measured by the STAR detector. The v2 and v3 are measured as a function of transverse momentum and centrality. Their energy dependence is also studied. v3 is found to be more sensitive to the change in the center-of-mass energy than v2. Scaling by constituent quark number is found to hold for v2 within 10%. This observation could be evidence for the development of partonic collectivity in 54.4 GeV Au+Au collisions. Differences in v2 and v3 between baryons and antibaryons are presented, and ratios of v3/v23/2 are studied and motivated by hydrodynamical calculations. The ratio of v2 of φ mesons to that of antiprotons [v2(φ)/v2(p¯)] shows centrality dependence at low transverse momentum, presumably resulting from the larger effects from hadronic interactions on antiproton v2.

Gauging The Mass Of Metals In The Gas Phase Of Galaxies From The Local Universe To The Epoch Of Reionization, K. E. Heintz, Alice E. Shapley, Ryan L. Sanders, M. Killi, D. Watson, G. Magdis, F. Valentino, M. Ginolfi, D. Narayanan, T. R. Greve, J. P. U. Fynbo, D. Vizgan, S. N. Wilson

Physics and Astronomy Faculty Publications

The chemical enrichment of dust and metals are vital processes in constraining the star formation history of the universe. These are important ingredients in the formation and evolution of galaxies overall. Previously, the dust masses of high-redshift star-forming galaxies have been determined through their far-infrared continuum, however, equivalent, and potentially simpler, approaches to determining the metal masses have yet to be explored at z ≳ 2. Here, we present a new method of inferring the metal mass in the interstellar medium (ISM) of galaxies out to z 8, using the far-infrared [C II]- 158† μm emission line as a proxy. …

Jwst/Nirspec Balmer-Line Measurements Of Star Formation And Dust Attenuation At Z ∼ 3–6, Alice E. Shapley, Ryan L. Sanders, Naveen Reddy, Michael W. Topping, Gabriel B. Brammer

Physics and Astronomy Faculty Publications

We present an analysis of the star formation rates (SFRs) and dust attenuation properties of star-forming galaxies at 2.7 ≤ z < 6.5 drawn from the Cosmic Evolution Early Release Science Survey. Our analysis is based on JWST/NIRSpec Micro-Shutter Assembly R ∼ 1000 spectroscopic observations covering approximately 1-5 μm. Our primary rest-frame optical spectroscopic measurements are Hα/Hβ Balmer decrements, which we use as an indicator of nebular dust attenuation. In turn, we use Balmer decrements to obtain dust-corrected Hα-based SFRs (i.e., SFR(Hα)). We construct the relationship between SFR(Hα) and stellar mass (M _*) in three bins of redshift (2.7 ≤ z < 4.0, 4.0 ≤ z < 5.0, and 5.0 ≤ z < 6.5), which represents the first time the star-forming main sequence has been traced at these redshifts using direct spectroscopic measurements of Balmer emission as a proxy for SFR. In tracing the relationship between SFR(Hα) and M _* back to such early times (z > 3), it is essential to use a conversion factor between Hα and SFR that accounts for the subsolar metallicity prevalent among distant galaxies. We also use measured Balmer decrements to investigate the relationship between dust attenuation and stellar mass out to z ∼ 6. The lack of significant redshift evolution in attenuation at fixed stellar mass, previously confirmed using Balmer decrements out …

Azimuthal Anisotropy Measurement Of (Multi)Strange Hadrons In Au+Au Collisions At √𝑠𝑁⁢𝑁=54.4 Gev, Star Collaboration

Physics and Astronomy Faculty Publications

Azimuthal anisotropy of produced particles is one of the most important observables used to access the collective properties of the expanding medium created in relativistic heavy-ion collisions. In this paper, we present second (v2) and third (v3) order azimuthal anisotropies of KS0, φ, Λ, Ξ, and ω at midrapidity (|y|< 1) in Au+Au collisions at sNN=54.4 GeV measured by the STAR detector. The v2 and v3 are measured as a function of transverse momentum and centrality. Their energy dependence is also studied. v3 is found to be more sensitive to the change in the center-of-mass energy than v2. Scaling by constituent quark number is found to hold for v2 within 10%. This observation could be evidence for the development of partonic collectivity in 54.4 GeV Au+Au collisions. Differences in v2 and v3 between baryons and antibaryons are presented, and ratios of v3/v23/2 are studied and motivated by hydrodynamical calculations. The ratio of v2 of φ mesons to that of antiprotons [v2(φ)/v2(p¯)] shows centrality dependence at low transverse momentum, presumably resulting from the larger effects from hadronic interactions on antiproton v2.

Beam Energy Dependence Of Fifth- And Sixth-Order Net-Proton Number Fluctuations In Au + Au Collisions At Rhic, Star Collaboration

Physics and Astronomy Faculty Publications

We report the beam energy and collision centrality dependence of fifth and sixth order cumulants (C5, C6) and factorial cumulants (κ5, κ6) of net-proton and proton number distributions, from center-of-mass energy (sNN) 3 GeV to 200 GeV Au+Au collisions at RHIC. Cumulant ratios of net-proton (taken as proxy for net-baryon) distributions generally follow the hierarchy expected from QCD thermodynamics, except for the case of collisions at 3 GeV. The measured values of C6/C2 for 0%-40% centrality collisions show progressively negative trend with decreasing energy, while it is positive for the lowest energy studied. These observed negative signs are consistent with …

Measurement Of Sequential ϒ Suppression In Au + Au Collisions At √Snn = 200 Gev With The Star Experiment, Star Collaboration

Physics and Astronomy Faculty Publications

We report on measurements of sequential ϒ suppression in Au+Au collisions at sNN=200 GeV with the STAR detector at the Relativistic Heavy Ion Collider (RHIC) through both the dielectron and dimuon decay channels. In the 0%-60% centrality class, the nuclear modification factors (RAA), which quantify the level of yield suppression in heavy-ion collisions compared to p+p collisions, for ϒ(1S) and ϒ(2S) are 0.40±0.03(stat)±0.03(sys)±0.09(norm) and 0.26±0.08(stat)±0.02(sys)±0.06(norm), respectively, while the upper limit of the ϒ(3S) RAA is 0.17 at a 95% confidence level. This provides experimental evidence that the ϒ(3S) is significantly more suppressed than the ϒ(1S) at RHIC. The level of …

Measurementus Magnetic Moment To 0.20 Ppm Of The Positive Muon Anomalo, The Muon G − 2 Collaboration

Physics and Astronomy Faculty Publications

We present a new measurement of the positive muon magnetic anomaly, aμ(gμ-2)/2, from the Fermilab Muon g-2 Experiment using data collected in 2019 and 2020. We have analyzed more than 4 times the number of positrons from muon decay than in our previous result from 2018 data. The systematic error is reduced by more than a factor of 2 due to better running conditions, a more stable beam, and improved knowledge of the magnetic field weighted by the muon distribution, p′, and of the anomalous precession frequency corrected for beam dynamics effects, ωa. From the ratio ωa/p′, together with precisely …

Ai-Assisted Optimization Of The Ecce Tracking System At The Electron Ion Collider, C. Fanelli, Z. Papandreou, K. Suresh

Physics and Astronomy Faculty Publications

The Electron-Ion Collider (EIC) is a cutting-edge accelerator facility that will study the nature of the ‘‘glue’’ that binds the building blocks of the visible matter in the universe. The proposed experiment will be realized at Brookhaven National Laboratory in approximately 10 years from now, with detector design and R&D currently ongoing. Notably, EIC is one of the first large-scale facilities to leverage Artificial Intelligence (AI) already starting from the design and R&D phases. The EIC Comprehensive Chromodynamics Experiment (ECCE) is a consortium that proposed a detector design based on a 1.5 T solenoid. The EIC detector proposal review concluded …

Scientific Computing Plan For The Ecce Detector At The Electron Ion Collider, J. C. Bernauer, C. T. Dean, C. Fanelli, J. Huang, K. Kauder, D. Lawrence, J. D. Osborn

Physics and Astronomy Faculty Publications

The Electron Ion Collider (EIC) is the next generation of precision QCD facility to be built at Brookhaven National Laboratory in conjunction with Thomas Jefferson National Laboratory. There are a significant number of software and computing challenges that need to be overcome at the EIC. During the EIC detector proposal development period, the ECCE consortium began identifying and addressing these challenges in the process of producing a complete detector proposal based upon detailed detector and physics simulations. In this document, the software and computing efforts to produce this proposal are discussed; furthermore, the computing and software model and resources required …

Design, Construction, And Stabilization Of An Adjustable Repetition Rate Frequency Comb For Precision Spectroscopy, Matthew Carter

Physics, Astronomy and Geophysics Honors Papers

Optical frequency combs have numerous applications across the sciences. One of the most powerful applications is in molecular spectroscopy, which takes advantage of both the coherence of lasers and combs’ inherent broad bandwidth. One well-established design is the erbium fiber comb, which is popular due to its low cost and relative ease of construction. I have modified the traditional all-fiber design by introducing an adjustable free-space section which allows for adjustments to the path length, and thus the comb’s repetition rate. This low-cost addition allows for repetition rate matching, a necessity for dual-comb spectroscopy, and active repetition rate stabilization, which …

Quantum Computing And Its Applications In Healthcare, Vu Giang

OUR Journal: ODU Undergraduate Research Journal

This paper serves as a review of the state of quantum computing and its application in healthcare. The various avenues for how quantum computing can be applied to healthcare is discussed here along with the conversation about the limitations of the technology. With more and more efforts put into the development of these computers, its future is promising with the endeavors of furthering healthcare and various other industries.

Direct Parameter Fitting Of Action Potentials In Skeletal Muscle Cells Which Include Longitudinal Segments, Tyme Suda

Browse all Theses and Dissertations

Excitation of skeletal muscle cells triggers a large voltage spike known as an action potential (AP), leading to muscle contraction. Modeling of an AP is typically done using the method developed by scientists Hodgkin and Huxley (HH). In the HH method, voltage and time gated Na+ and K+ ionic currents are simulated, along with a positive “Leak” ionic current and capacitive current. Due to the complexity and the computational time required for simulation, direct fitting of HH parameters to experimental APs has rarely been attempted. A previous thesis at Wright State performed direct fitting for the case of a single …

A First Study Of The Effect Of Surface Roughness In Additive-Manufactured Copper At Thz Frequencies, Tomas Di Fulvio, Elliott R. Brown, Andrew J. Huebner, Michael A. Saville, Paul Sotirelis

Physics Faculty Publications

The surface roughness of additive-manufactured copper is characterized by profilometry, and its effect on the THz reflectance is measured at 600 GHz. A strong specular component is measured, as well as a non-specular component displaying fluctuations in the wings of the angular reflectance plot.

Hovering Potato ~ Activity Plan, Admin Stem For Success

STEM for Success Showcase

This experiment is a great example of chemistry. This experiment relies heavily on density and diffusion.

• Water is less dense than half of a potato. Therefore, the potato sinks.

• Sugar water is more dense than half of a potato. Therefore, the potato floats.

By slowly adding water to sugar water, two layers are formed which allows the potato to hover in between. Slowly adding the water allows for diffusion to occur at a minimum.

Solitons And Their Applications In Physics, B. A. Yount

EWU Masters Thesis Collection

No abstract provided.

Microstructural Characterizations And Strength Development Of Self-Compacting Concrete Using Rice Husk Ash, Floyd Rey P. Plando, Joel T. Maquiling

Physics Faculty Publications

The conversion of waste and by-products into green building materials is gaining attention for a sustainable economy. Particularly, rice husk ash (RHA) is used as a precursor in self-compacting concrete due to its high pozzolanic activity. It also minimizes the use of conventional OPC as a primary binder during construction by exploiting its chemical features and characteristics as an alternative binding agent. Developing and mass-producing RHA as a cementitious material would lessen the carbon footprint that harms the environment. This study presents the compressive strength and microstructural characterizations of rice husk ash-based self-compacting concrete (RHA-SCC). The scanning electron microscope was …

New Features In Landyne 5 - A Software Suite For Materials Characterization And Crystallography By Transmission Electron Microscopy, Xing-Zhong Li

Nebraska Center for Materials and Nanoscience: Faculty Publications

Landyne software suite (version 5) includes fifteen standalone computer programs for materials characterization and crystallography by transmission electron microscopy [1]. A launcher interface is provided for users to access all components conveniently. The purpose of this software suite is twofold: i) as research tools to analyze experimental results, ii) as teaching tools to explore the varieties of electron diffraction methods and crystallographic image processing principles.

The Landyne suite previously included: PTable, an interactive periodic table of elements; SVAT, a structural visual and analytical tool; SAED and PCED, simulation and analysis of electron diffraction (spot and ring) patterns; QSAED and QPCED, …

Structural, Electronic, And Magnetic Properties Of Cofevge-Based Compounds: Experiment And Theory, Parashu Kharel, Zachary Lehmann, Gavin Baker, Lukas Stuelke, Shah R. Valloppilly, Paul M. Shand, Pavel V. Lukashev

Nebraska Center for Materials and Nanoscience: Faculty Publications

We have carried out a combined theoretical and experimental investigation of both stoichiometric and nonstoichiometric CoFeVGe alloys. In particular, we have investigated CoFeVGe, Co_1.25Fe_0.75VGe, Co_0.75Fe_1.25VGe, and CoFe_0.75VGe bulk alloys. Our first principles calculations suggest that all four alloys show ferromagnetic order, where CoFeVGe, Co_1.25Fe_0.75VGe, and Co_0.75Fe_1.25VGe are highly spin polarized with spin polarization values of over 80%. However, the spin polarization value of CoFe_0.75VGe is only about 60%. We have synthesized all four samples using arc melting and high-vacuum annealing …

Tem Studies Of A New Modulated Structure In Mn2Rusn Alloy And Intermetallic Phases In Fe3+XCo3–XTi2 (X = 0, 1, 2, 3) Alloys, Xing-Zhong Li, Shah R. Valloppilly

Nebraska Center for Materials and Nanoscience: Faculty Publications

Heusler compounds are a remarkable class of intermetallic materials with wide-ranging and tunable properties. The Mn₂RuSn Heusler compound was reported as an L2₁B-type cubic phase, a = 0.62195 nm, distinguishing from the original L2₁ structure (or L2₁A-type). The L2₁B-type structure is a disordered variant of the inverse Heusler structure, XA-type (Prototype-CuHg₂Ti, space group No. 216, F4–3m).

In our recent work [1], we observed a new modulated structure derived from the XA-type structure and its orthogonal domains in the Mn₂RuSn Heusler alloy. The structural characterization was carried out …

Reflective Planar Optics With Cholesteric Liquid Crystal For Near-Eye Displays, Yannanqi Li

Electronic Theses and Dissertations, 2020-2023

Display market has undergone dramatic changes as the near eye displays (NED) are gaining increasing attention because they offer a deeper level of human-computer interaction with the advancement of electronic devices and computer sciences. The NEDs can be presented in two ways: virtual reality (VR) and augmented reality (AR). The former is completely immersive while the latter combines the digital information with the surrounding scenes. Although several VR headsets have been commercialized for consumers and AR products for prosumers because of their high cost, but there is still a long way to go to satisfy the strict requirements of human …

Integrated Frequency Combs For Applications In Optical Communications & Microwave Photonics, Chinmay Shirpurkar

Electronic Theses and Dissertations, 2020-2023

This dissertation reviews the advancements made in chip-scale optical frequency combs and their applications towards optical communications and optical to RF links. We review different chip-scale comb sources and in particular, chip-scale Kerr microresonator frequency combs. Then, we establish the theoretical background in nonlinear optics which allows the formation and stabilization of Kerr solitons in nonlinear cavities. We also discuss the concept of optical injection locking and in particular, multi-tone injection locking which precedes the idea of regenerative harmonic injection locking. We then go on to show the experimental work involved in soliton generation and characterization. We show efforts towards …