Digital Commons Network^™

Sensorless Control Of Pmsm Based On An Improved Super-Twisting Sliding-Mode Observer, Shiyu Chen, Xinmin Chen, Xionglong Hu, Heng Wang, Yepeng Han, Jiajie Chen

Journal of System Simulation

Abstract: To address the chattering in back electromotive force estimation and the gain mismatch across a wide speed range when using a conventional super-twisting sliding-mode observer in the sensorless control system of a permanent-magnet synchronous motor, this paper proposed an improved adaptive-gain super-twisting sliding-mode observer. A linear correction term was introduced into the super-twisting algorithm and integrated with a gain adaptation law based on speed feedback, enabling the system to achieve finite-time convergence and high-precision back electromotive force estimation over a wide speed range. A variable-gain adaptive complex-coefficient filter was constructed to effectively suppress the harmonic components in the observed …

Line Spectrum Enhancement Technology Based On Second-Order Vector Hydrophone, Zhengkai Wang, Yirong Yu, Qing Hu

Journal of System Simulation

Abstract: In view of the problem of limited detection of line spectrum signals in low signal-to-noise ratio underwater environments, a spatial-temporal cooperative line spectrum enhancement technology based on a two-dimensional second-order vector hydrophone was proposed. A receiving signal model of the two-dimensional second-order vector hydrophone was established to clarify the spatial characteristics of its output signals. For spatial signal processing, the signals from each channel of the vector hydrophone were fused to suppress noise, and a channel combination method with high spatial directivity gain was proposed to achieve spatial processing gain. For temporal signal processing, an adaptive line spectrum enhancer …

Dodaf-Opm-Sd Cross-Layer Automated Mapping Method Based On A Unified Semantic Bridge, Lei Cheng, Gang Xiao, Binbin Wang, Siming Peng, Haozhe Liang, Xiangwu Gong

Journal of System Simulation

Abstract: To address the problems of the inability of DoDAF views to directly drive simulations and the insufficient cross-layer semantic alignment and consistency verification, a DoDAF-OPM-SD cross-layer semantic automated/semi-automated mapping and verification method was proposed in this paper. Targeting tactical/operational-level problems dominated by "conservation+feedback+time delay", the proposed method reduced manual mapping under expert adjudication based on a "minimal executable view set". The object-process methodology served as a semantic bridge to map architectural elements into the stock-flow-feedback structures of system dynamics; semantic embedding disambiguation, integer programming harmonization, and K-nearest neighbor parameter completion were integrated; end-to-end traceability was connected through traceability identifiers, …

Design And Implementation Of Hdrt Real-Time Simulation System, Huiji Zheng, Guangsen Wang, Qing Liu, Kang Wang, Zhiwei Wang, Zhenyu Zhang, Shuo Wang, Zhu Liu

Journal of System Simulation

Abstract: In view of the real-time simulation requirements of large-scale complex systems such as power electronics, a hidden dragon real-time(HDRT) simulation system was developed. The strict time constraints of simulation tasks were guaranteed based on a resource-dedicated real-time scheme, supporting fixed-step and multi-rate simulations from the second level to the hundred-nanosecond level. A hybrid CPU-field programmable gate array(FPGA) architecture was adopted to accelerate computation. The system could utilize multiple simulators for parallel simulation and realized microsecond-level real-time data interaction between simulators through a dedicated PCIe switch. A single simulator could be expanded through I/O interface equipment, supporting a maximum input …

Numerical Simulation Of Water Tank Solidification In A Firefighting Aircraft Under High-Altitude Cold-Soak Conditions, Guanmian Liu, Zhihang Cheng, Hejun Qin, Kangzhi Yang, Qing Wen, Kun Gao

Journal of System Simulation

Abstract: A systematic numerical simulation study was conducted to address the issue of internal water tank solidification in firefighting aircraft under high-altitude low-temperature conditions. Based on computational fluid dynamics methods, a solidification-melting model considering fluid-structure interaction heat transfer and phase change processes was adopted. Through reasonable simplification of the complex geometric model, a quasi-three-dimensional computational model suitable for engineering analysis was developed. The influence laws of key parameters, including high-altitude cold-soak temperature, ground initial water temperature, and cold-soak time, on the freezing characteristics of the water tank were investigated. Combining with the parameter influence laws, a safety criterion using the …

Optimization Of Node Deployment For Three-Dimensional Heterogeneous Wsn In Elongated Structural Space, Jiguang Yang, Jiuyuan Huo, Fang Cao, Cong Mu

Journal of System Simulation

Abstract: To achieve effective coverage of key monitoring points in an elongated structural space, a heterogeneous wireless sensor network(HWSN) deployment optimization method combining the virtual force algorithm(VFA) and multi-strategy improved whale optimization algorithm(MSIWOA), namely HVF-MSIWOA, was proposed. A dynamic adaptive weight mechanism and a t-distribution perturbation operator with heterogeneous degrees of freedom were designed, enabling the whale optimization algorithm(WOA) to balance global exploration and local exploitation and jump out of local optima; combining the topological characteristics of the elongated space and node density distribution, an adaptive virtual force distance threshold between heterogeneous nodes was constructed; the mapping relationship between network …

Combat Effectiveness Evaluation Of Anti-Ship Missiles For Intelligent Autonomous Recognition, Long Zhang, Xuanming Feng, Zhen Lei, Bo Yang, Ying Wang

Journal of System Simulation

Abstract: To address the core issues of poor adaptability of static fusion strategies in existing recognition models, as well as the simplistic evaluation system and its disconnection from dynamic confrontation requirements, a practical four-dimensional evaluation system encompassing "recognition accuracy, antijamming stability, decision timeliness, and modal complementarity" was constructed, and an operational effectiveness composite index (OECI) capable of dynamically adapting to tactical scenarios was proposed. A multimodal dynamic attention fusion network (MDA-Net) for anti-ship missiles in complex confrontation environments was designed. Through heterogeneous feature decoupling, dynamic weighting of cross-modal attention, and a hierarchical gating decision mechanism, the autonomous evaluation and adaptive …

Infrared Image Generation Method Based On Improved Cyclegan, Qiqi Jin, Xiang Zhang, Li Gao, Lin Zhang, Junliang Yan, Peiyao Li

Journal of System Simulation

Abstract: To address the problems in current infrared image generation such as insufficient contrast between target and scene, excessively large discrepancies from real scenes, indistinct thermal source features, and great difficulty in constructing measured infrared image datasets, an improved CycleGAN-based infrared image generation method was proposed. By optimizing the network structure of the generator and adding a non-local module and a CBAM convolutional attention mechanism into the generator, the extraction capability of CycleGAN for infrared features was enhanced, enabling the network to capture the subtle features of targets more accurately; a perceptual loss function was introduced to improve the detail …

Investigating The Impacts Of Information Framing And Representation On Multi-Stakeholder Decision-Making For Tradespace Exploration, Meredith G. Sutton

All Dissertations

Tradespace exploration (TSE) is a decision-making process used in engineering design to search through a tradespace, containing all potential solutions to a design problem and their performance evaluations, in order to select optimal or near-optimal solutions. Solution optimality is driven by a desire to maximize the overall utility of a solution, which often cannot be done without making tradeoffs or compromises. The TSE process requires vast amounts of information which can be difficult to generate and understand, often leading to challenges including information overload, delays in decision-making, and suboptimal decisions, even for the most experienced designers. To address the challenges …

Bridging Models And Real-World Performance: Capturing Represented, Hidden, And Unrepresented Dynamics In Complex Systems, Dixizi Liu

All Dissertations

Complex systems often depend on adaptive performance that is difficult to capture using structured data or formal models alone. This dissertation asks how predictive modeling, coordination-cost measurement, and simulation can be integrated to better represent the visible, hidden, and unrepresented dynamics that shape real-world system performance.

Sterile Processing Departments (SPDs) provide the empirical context for this work because they support safe and timely surgical care while operating under high workload variability, time pressure, and tight coordination with operating rooms. Hospitals rely on SPDs to clean, assemble, sterilize, and deliver surgical instrument trays so surgeries can start on time and proceed …

Human-Centered Design Of Extended Reality For Learning Adoption, Effectiveness, And Collaborative Training Performance, Bhargav Upadhyay

All Dissertations

Extended reality (XR) technologies like virtual reality (VR) and augmented reality (AR) can be used for technical training to help students learn and practice complex tasks in a safe digital environment. Despite known benefits evidence is required to explore the effectiveness of these technologies to support student learning outcomes. Furthermore, technical training programs need evidence about when these tools improve learning, what are the barriers to adoption of these technologies, and how training should be designed by leveraging these technologies. This dissertation examined how XR technologies can support higher education and workforce training, specifically focusing on barriers and facilitators to …

A Hybrid Machine Learning-Based Feasibility Prediction Of 3d Mechanical Designs Using Scalar And Geometric Features, Md Mohsin Uddin Fahim

Open Access Theses & Dissertations

The computational bottleneck of structural feasibility screening frequently hinders the transition from a digital 3D model to a physically manufactured component. Traditionally, engineers have relied on either overly rigid heuristic constraint checks or computationally exhaustive finite element simulations. To address this inefficiency, this thesis proposes and validates a hybrid machine-learning framework to predict the structural manufacturability of 3D mechanical designs. Moving beyond the conventional reliance on isolated scalar parameters, the proposed methodology extracts and integrates both scalar manufacturing constraints (e.g., tolerance, minimum feature thickness) and spatial geometric descriptors (e.g., bounding volume, aspect ratio) directly from STL mesh data. Utilizing a …

Prevention Vs Detection: A Discrete-Event Simulation Assessment Of Inspection Staffing, Pick-To-Light, And Ai-Based Inspection In Aerospace Wire Harness Kitting, Jorge Mares

Open Access Theses & Dissertations

Aerospace wire harness manufacturing operates under conditions that standard industrial engineering methods were not designed to address. Volumes are low, configurations change between orders, assembly is performed manually by certified labor that cannot be expanded quickly, and IPC/WHMA-A-620 Class 3 acceptance requires that every unit be verified rather than sampled. Kit assembly concentrates the resulting risk, because each item retrieved from the rack is an independent selection decision, and the attributes distinguishing a correct item from an incorrect one are frequently not visible to the operator. Errors introduced there are discovered downstream, after substantial certified labor has been invested. A …

Three-Dimensional Gaussian Reconstruction Of Large-Scale Scenes Under Multi-View Geometry Constraints, Haohao Cui, Yanqiang Di, Qing Liu, Xianguo Meng

Journal of System Simulation

Abstract: To enhance the geometry reconstruction quality of the GS algorithm in large-scale scene reconstruction, an optimization method constrained by multi-view geometry reconstruction results was proposed. 2D Gaussian planes were used as geometric primitives to overcome depth anisotropy, and dense depth maps generated by DUSt3R and aligned by sparse point clouds were introduced as constraints. By designing a multi-stage optimization strategy that decouples geometry and rendering, the gradient conflict problem in multi-objective training was solved. Experiments on the MatrixCity dataset indicate that the method surpasses comparison methods in related indicators of geometry reconstruction quality and rendering quality in large-scale scenes. …

Balancing War And Peace In Taekwondo Athlete Development: A Multi-Criteria Coaching Decision Support Framework Using Leadership Scale For Sports And Fuzzy Ahp, King Harold A. Recto, Hazel Jade L. Antonio, Jhyrald Anthony P. Dalida

Electronics, Computer, and Communications Engineering Faculty Publications

Coaching effectiveness is frequently evaluated through competitive outcomes, with the assumption that coaching behaviors directly influence athlete performance. This study examined the relationship between perceived coaching behaviors and individual win percentage among collegiate Taekwondo athletes using the Leadership Scale for Sports (LSS). Descriptive statistics, correlation analysis, and regression analysis were conducted across five coaching dimensions: Training and Instruction, Democratic Behavior, Autocratic Behavior, Social Support, and Positive Feedback. Results showed that none of the coaching dimensions demonstrated a statistically significant relationship with win percentage. Although coaching behaviors did not significantly predict win percentage, the findings suggest that athlete development is shaped …

Drones In Wildfire Airspace Management: Developing A Scalable Framework For Mid-Sized Cities, Victoria Denise Tanner Williamson

Engineering Management & Systems Engineering Theses & Dissertations

Wildfires are becoming increasingly frequent and severe, creating growing risks for mid-sized communities with limited emergency response resources. The January 2025 Los Angeles wildfires—which burned more than 57,000 acres and destroyed over 18,000 structures—underscore the urgent need to strengthen wildfire response strategies through the integration of unmanned aerial systems (UAS) (Hardy, 2025).

This study develops a scalable framework for drone-assisted wildfire response in resource-constrained environments. Using the city of Waynesboro, Virginia, as a case study, the research examines how mid-sized jurisdictions can integrate unmanned aerial vehicles (UAVs) to improve preparedness, response, and recovery. A three-round, mixed-methods Delphi study engages emergency …

Structure Meets Context: A Simulation Study Of Centralized And Decentralized Decision-Making In Complex Environments, Murat Balci

Engineering Management & Systems Engineering Theses & Dissertations

The question of when to centralize or decentralize decision-making authority is a foundational problem in organizational theory and management science. Yet existing research often favors decentralized structures, frequently treating them as universally superior, and provides limited guidance on when centralization may be more effective. Leaning toward decentralization without thoroughly exploring options leaves organizational designers without clear direction under varying environmental conditions. This study addresses that gap by developing and applying a simulation-based framework to evaluate the context-dependent effectiveness of centralized and decentralized decision-making structures.

Drawing on contingency theory and decision science, the study conceptualizes environmental complexity along two dimensions: dynamism …

A Causal Inference Protocol For Root-Cause Diagnosis In Non-Stationary Industrial Time Series, Cansu Yalim

Engineering Management & Systems Engineering Theses & Dissertations

Industrial fault diagnosis increasingly relies on data-driven methods, yet most approaches assume process stationarity and treat association-based rankings as sufficient evidence for root-cause identification. Neither assumption holds when operating phases and fault progression create distinct behavioral regimes with shifting relationships among variables, and neither answers which feasible corrective action would alter a fault trajectory. The absence of a procedure addressing non-stationarity, causal identifiability, and decision-relevant effect estimation constitutes the gap this dissertation targets. In this context, a regime is a time period in which the process operates under a relatively consistent setting, so the relationships among variables are approximately stable …

Spatial Analysis Of The Environmental And Climatic Explanatory Relationship Of Photovoltaic Potential For Sustainable Shrimp Farming, Dyah Lestari Widaningrum, Roikhanatun Nafi'ah, Religiana Hendarti, Alexandra Catherine Djunaedi, Evaristus Didik Madyatmadja

Journal of Environmental Science and Sustainable Development

Sustainable shrimp aquaculture requires reliable and affordable energy, particularly for coastal pond aeration. However, identifying suitable locations for photovoltaic (PV) deployment remains challenging because ground-based solar-resource measurement is expensive, spatially limited, and difficult to maintain across large coastal regions. This study develops a village-level spatial framework to evaluate PV potential for shrimp aquaculture using open geospatial datasets. The analysis covered villages across Central Java, Special Region of Yogyakarta, and East Java. PV power potential (PVout), Global Horizontal Irradiation (GHI), and Direct Normal Irradiation (DNI) were obtained from the Global Solar Atlas; land surface temperature (LST) and precipitation were derived from …

Stop Blaming My Users: Illumination Of The Technocentric Mythos Bias, Ervin H. Frenzel, Richard Lightcap

Journal of Cybersecurity Education, Research and Practice

 Abstract -This conceptual essay addresses the need for systemic and systematic transdisciplinary analytical techniques within cybersecurity and technical security. This conceptual essay is contingent upon recognition that cybersecurity is not simply technical in nature, it does not need an adversary, and more importantly it is based upon systems engineering and systems thinking.  The essay contributes a socio-technical attribution chain and field-specific ontology/taxonomy which distinguish user-triggered events from root causes, latent conditions, technical debt, validation failures, governance failures, and attribution bias before assigning responsibility to end users. It systematically defines an ontology inclusive of developer technical debt, organizational debt arising from …

Improving Cancer Diagnosis And Patient Outcomes With Deep Learning Models, Mariana Arriz-Jorquiera

USF Tampa Graduate Theses and Dissertations

Cancer care depends on timely and reliable decisions, from detection and diagnosis to treatment planning and patient monitoring. These decisions are often made under uncertainty because medical images and healthcare data may be noisy, incomplete, or difficult to interpret. In breast cancer imaging, ultrasound is widely used because it is safe, accessible, and complementary to other imaging modalities. However, variations in image quality, acquisition conditions, and noise can obscure lesion boundaries and texture, affecting human interpretation and artificial intelligence reliability. This dissertation develops deep learning, image-analysis, and optimization methods to improve healthcare decisions under imperfect information. Its primary focus is …

From Shortage To Strategy: Optimizing Scarce Resource Allocation In Healthcare, Daniela Duran Cantarino

USF Tampa Graduate Theses and Dissertations

The allocation of scarce medical resources presents one of the most consequential challenges in health care, requiring decisions that balance equity and efficiency under pervasive uncertainty. This dissertation develops optimization-based frameworks for two critical domains, organ transplantation and emergency medical services, and demonstrates how operations research methods can improve upon current practice along both dimensions simultaneously.

In the domain of deceased-donor kidney allocation, two complementary frameworks are proposed. The first is a bi-objective stochastic optimization model that jointly maximizes post-transplant survival (efficiency) and prioritizes candidates with the highest pre-transplant mortality risk (equity), subject to regional chance constraints on graft failure …

Assessing Computer Vision Based Conflict Detection In Uas Traffic Monitoring Under Secure Communication Constraints, Fadjimata Issoufou Anaroua

Doctoral Dissertations and Master's Theses

The rapid growth of Unmanned Aircraft Systems (UAS) and Advanced Air Mobility (AAM) is creating a new low-altitude airspace ecosystem where drones, air taxis, service suppliers, communication networks, sensors, and ground-based monitoring systems must work together safely. Within this ecosystem, UAS Traffic Management (UTM) is expected to provide a digital framework for coordinating operations beyond traditional air traffic control. However, reliable integration also requires resilient monitoring methods that can detect non-cooperative aircraft, protect communication links, and maintain timely situational awareness under real-world constraints.

This dissertation examines how computer vision can support cooperative monitoring systems such as Remote ID and ADS-B …

Antropometri Tangan Penduduk Kota Ambon Sebagai Dasar Perancangan Ergonomis, Puan Maryam Leaongso, Wilma Latuny, Aminah Soleman

National Journal of Occupational Health and Safety

The limited availability of hand anthropometric data for the Indonesian population, particularly for the residents of Ambon City, may affect the accuracy of designing ergonomic products, work equipment, and public facilities. This study aimed to measure and analyze 25 hand dimensions of the Ambon City population based on gender and age, and to compare the measurement results with national anthropometric data. This research employed a quantitative method with a descriptive design through an anthropometric approach. Data were collected directly from 200 respondents, consisting of 100 females (aged 18–40 years) and 100 males (aged 20–40 years). Data analysis was performed using …

Analysis Of Technology Introduction And Re-Innovation Models Of Chinese Enterprises Based On Transnational Patent Transfer Data: A Case Study Of Strategic Emerging Industries In Shandong Province, Kun Dong, Kexin Chen, Qingxiu Mu, Zihang Cui

Journal of Scientific Information Research

[Purpose/significance] Technology introduction re-innovation is the key path for enterprises to quickly acquire advanced technologies and transform them into independent innovation advantages, which is of great significance in promoting the upgrading of the national technology innovation system and enhancing industrial competitiveness. [Method/process] This article proposes a specific approach for analyzing the technology introduction and re-innovation model of enterprises based on cros-border patent transfer data, and takes strategic emerging industries in Shandong Province as an example for empirical research, then proposes the selection strategies for enterprises technology introduction re-innovation models. [Result/conclusion] Research shows that strategic emerging industry enterprises in Shandong Province …

A System Dynamics Model For Analyzing Customer Satisfaction Drivers In A Manufacturing Context, Mahnaz Asgari Sooran, Venkat Allada, Adewole Adegbola

Engineering Management and Systems Engineering Faculty Research & Creative Works

Customer satisfaction offers economic benefits and competitive advantage to manufacturing enterprises. However, a gap exists in understanding how to achieve customer satisfaction due to the complexities involved in coordinating various subsystems of an enterprise in an efficient manner. In this paper, we identified four internal and external-to-the-firm customer satisfaction drivers which include: government policies, supply chain reliability, knowledge management, and manufacturing performance criteria such as on-time delivery, quality and cost. We then developed a conceptual framework to define the non-linear mathematical relationships between drivers using system dynamics modeling. We conducted "what-if "scenario analyses for a base case, optimistic case and …

Prediction Of Satellite Temperature During An Orbit Of A Cubesat, Michael Reynolds

Honors Theses

This thesis develops a thermal-simulation strategy for predicting CubeSat component temperatures, applied to Jag-Sat-1, a CubeSat developed at the University of South Alabama and deployed from the International Space Station in 2022. The orbit was reconstructed from two-line element (TLE) data using simplified general perturbations (SGP4) propagation, and spacecraft attitude was recovered from onboard gyroscope measurements. Sunlight, penumbra, and umbra intervals were computed geometrically, and the external radiative environment — direct solar, Earth infrared, and albedo heat fluxes — was modeled using orientation-dependent view factors. These time-varying fluxes drove a transient finite-element thermal simulation of the full satellite geometry in …

Online Ppo-Based Multi-Hop Task Offloading Strategy For Vehicular Edge Computing, Wenzhu Zhang, Yuewei Bian, Fuli Xiong, Siqi Cai

Journal of System Simulation

Abstract: To address the problems of frequent communication link interruptions caused by dynamic network topologies and the sharp increase in computational complexity triggered by high-dimensional decision spaces in the vehicular edge computing (VEC) environment, a multi-hop task offloading strategy for VEC based on an online PPO algorithm was proposed. A multi-hop task offloading optimization model simultaneously considering link effective time, transmission rate, and computing resource constraints was constructed; a multi-hop A* path search algorithm integrating link stability and end-to-end delay was designed; an online offloading decision framework based on PPO was proposed, which transformed the 0-1 mixed integer nonlinear programming …

Research On Temporal Action Localization Methods For Cross-Modal Understanding, Jinwei Li, Xiaoyang Liu, Rusheng Ju

Journal of System Simulation

Abstract: To address the problems of insufficient localization accuracy and high model complexity in the temporal action localization (TAL) task for video-text cross-modal understanding, an anchor-free action transformer (AFAT) model was proposed. Based on the anchor-free framework, the local self-attention mechanism of Transformer was introduced to enhance the global modeling capability of temporal features. A multi-scale feature pyramid structure was combined to strengthen the representation of actions with different durations, and a lightweight predictor was adopted to reduce computational redundancy. Experimental results show that the average precision of this model on the THUMOS14 dataset is significantly improved compared with the …

Resilience Modeling Method For Combat System-Of-Systems Based On Hypernetwork And Game Theory, Yuxian Duan, Hanqiang Deng, Jiarui Zhang, Jian Huang, Shijia Zhang

Journal of System Simulation

Abstract: In view of the difficulties in dynamic reconfiguration and resilience evaluation faced by modern combat system-of-systems in a highly adversarial environment, and the deficiencies of existing studies in depicting high-order interaction relationships and cluster evolution mechanisms, this paper proposed a resilience modeling method for combat system-of-systems integrating hypernetwork and game theory, aiming to analyze the resilience mechanism of the system-of-systems in all dimensions from micro, mesoscopic, to macro levels. At the micro level, a high-order motif structure was introduced to represent the complex interaction modes among combat units, which overcame the information loss of traditional binary relationships in depicting …