Digital Commons Network^™

Lockheed Martin & U.S. Navy Drive Tractor, Nicolas Czincila, Andrew Pestone, Santiago Florez-Tascon, Kalvin Long, Nick Norman, Joseph Phan, Ashlynn Redding, Brandon Ribeiro, Noah Rodriguez, Diana Viherek, Mckenzie Winder

Mechanical and Civil Engineering Student Publications

The purpose of this project is to design and manufacture a manually operated, pneumatic-assisted Drive Tractor system for transporting heavy loads with the Air Pallet. This project was developed to improve maneuverability, reduce operator effort, and increase system reliability within industrial environments for our customers Lockheed Martin and the U.S Navy.

Sparcc – Solar Panel Augmentation Via Regulated Cooling And Cleaning, Zachary Rodgers, Connor Fromme, Mohammed Al Jahwari, Jack Connor, Nicolas Hubley, Adrian Kingdollar, Iain Leroy, Maria Jesus Munoz, Ashton Stringer

Mechanical and Civil Engineering Student Publications

Problem Statement: Solar energy is the fastest-growing source of energy in the world. Solar cells lose efficiency by 0.35-0.7% per degree Celsius and up to 98% from debris build up. The primary objective of SPARCC was to improve cell efficiency through cooling and cleaning. A brush system with water spray was implemented to clean the panels, and a passive cooling system that utilizes a solar chimney, heat sinks, and phase change material to clean and cool.

Automatic Determination Of Mechanical Properties From Molecular Dynamic Stress-Strain Curves Using Regression Fringe Response, Josh Kemppainen, Tristan Muzzy, Travis Wavrunek, Gregory Odegard

Michigan Tech Publications

Molecular dynamics (MD) simulations have become a powerful tool for studying polymers, designing new materials, and composites. Mechanical behavior in MD simulations are typically evaluated through stress-strain curves. However, MD-generated stress-strain curves are often obscured by thermal noise from atomic vibrations. This noise complicates the reliable derivation of mechanical properties and hinders objective and reproducible analysis. The noise in the stress-strain curves has been removed by using a Butterworth low-pass filter, enabling clearer interpretation of stress-strain data. Building on this, a novel analysis framework the Regression Fringe Response (RFR) is introduced to systematically determine the Young's modulus, yield strength, and …

Transitional And Turbulent Dynamics In Viscoelastic Wall-Bounded Flows, Alexia Martinez Ibarra

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

The addition of small amounts of long-chain polymers to a turbulent flow has been reported to modify the flow phenomena when compared to Newtonian flows, resulting in a significant skin-friction reduction. Although polymer-induced drag reduction has been extensively studied through both experimental and numerical studies, a unified and predictive understanding of the phenomenon is still lacking. This dissertation focuses on better understanding of this phenomenon, particularly on the transitional regime, which remains largely unexplored but is of utmost importance for both practical and fundamental purposes.

Firstly, direct numerical simulations are performed to study the effect of polymers on the laminar-turbulent …

Cast In Steel: Horseman's Axe, Sam A. Morris

Create@State

Cast in Steel is a competition between universities across North America started by the Steel Founders Society of America. The competition is centered around giving students the opportunity to learn about casting and the steel industry in general. A prompt of a weapon or tool with some level of historical significance is given to all the teams. The prompt for the 2026 Arkansas State University team, was a Horseman’s Axe. The team designed their rendition of a horseman’s axe, worked with Southern Cast Products as their local industry parter, and fabricated a finished axe to represent Arkansas State University as …

Analysis For Predicting Surface Temperature And Combustion Of Heavy-Duty, Pre-Chamber-Enabled, Hydrogen Engines, Tony Spezia

Master's Theses (2009 -)

Hydrogen as an alternative fuel shows great promise to help reduce greenhouse gas emissions from heavy duty engines. However, the challenge for hydrogen engines is that hydrogen has very different combustion properties compared to conventional hydrocarbon fuels. Hydrogen has very high flame speeds, very low ignition energy, and very wide flammability limit. These properties result in hydrogen engines being prone to abnormal combustion. Abnormal combustion makes hydrogen engines difficult to control or can cause catastrophic damage to the engine, so it is important to avoid conditions where abnormal combustion occurs. Hot spots along the combustion chamber walls are often the …

Techno-Economic Analysis Of Hybrid Systems As A Solution For Electricity Supply During The Dry Season At The Bakaru Run-Of-River Hydropower Plant, Zamharir Aditya Febri, Mohammad Akita Indianto, Sheila Tobing

Journal of Materials Exploration and Findings

Within the South Sulawesi power system (Sulbagsel), the Bakaru Hydro Power Plant serves as a key facility expected to provide consistent and reliable electricity supply. However, since the Bakaru plant operates under a Run of River scheme, its energy output is highly dependent on river discharge rates. In 2024, a significant decrease in water flow was recorded between August and October, which led to a drastic reduction in power generation. To address this challenge, a hybrid energy system is proposed to ensure continuous load coverage, particularly during the dry season. The optimal configuration of this hybrid system was modeled and …

Techno-Enviro-Economic Analysis Of Precipitated Calcium Carbonate Production From Carbon Dioxide In Cement Industry Flue Gas And Calcium Hydroxide, Natalia Debora Panggabean, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

CCUS is a technological solution to reduce emissions from the cement industry, which is the second largest CO2-intensive industry. This study aims to analyze technical, economic, and environmental performance of Precipitated Calcium Carbonate (PCC) synthesis in cement industry flue gas. The process simulation includes the CO2 capture system from cement plant, CO2 captured used as feedstock for PCC synthesis process through its reaction with calcium hydroxide. The simulation was carried out using ASPEN Plus software. Technical analysis was performed to determine the CO2 capture efficiency and PCC synthesis efficiency. Economic analysis was conducted to calculate CO2 capture cost and production …

Feasibility Analysis Of Thermal Oxidizer To Determine Remaining Life Using Fitness- For-Service Level 3 Method, Yudhi Yudistirawan, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra, Dewi Kurnia Suci, Agung Putra Mahardhika

Journal of Materials Exploration and Findings

An aged thermal oxidizer (TOX) in the oil and gas industry necessitates a comprehensive evaluation to ensure its continued safe operation. This study presents a Remaining Life Assessment (RLA) and a Fitness for Service (FFS) evaluation for the four main components of the TOX, in accordance with API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div-1 standards. The investigation includes the determination of maximum stress and maximum temperature required to assess the operational viability of the reactor. The four components are radiant, convection, transition, and stack sections—were modeled using the finite element method (FEM). Following the geometric modeling, …

Risk Identification Of Green Hydrogen Supply Chain In Ammonia Industry In Indonesia Using Delphi And Topsis Methods, Ananda Priatama, Sheila Tobing

Journal of Materials Exploration and Findings

The development of green hydrogen in Indonesia, while promising for supporting industrial decarbonization, remains in its early stages and faces various challenges across technical, economic, and regulatory domains. This study aims to identify and prioritize the risks linked to green hydrogen supply chain in Indonesia, particularly for applications in the ammonia industry. A set of 49 potential risk factors was initially compiled through literature review and prior studies. The Delphi method was employed with a panel of experts to validate these risks, ultimately refining the list to 27 critical risk factors. Subsequently, the Technique for Order Preference by Similarity to …

A Sustainable Approach To Tensile Property Enhancement In Sand Casting Via Metal Chip–Sand Composite Molds, Maaruf Isyaku, Danjuma Saleh Yawas, Mathew Olatunde Afolayan, Terva Ause

Journal of Materials Exploration and Findings

The present work focuses on the study of the effect of adding different weight percentages and particle sizes of various metal chips to foundry sand on the tensile strength of aluminum alloy castings, utilizing Taguchi's optimization methodology and regression analysis. Characterization techniques such as X-ray fluorescence (XRF), thermogravimetry, and SEM were also used. The XRF analysis identified aluminum (76.61%), silicon (17.49%), and magnesium (1.28%) as the major elements in the aluminum alloy engine block. For the foundry sand, silicon (89.51%), phosphorus (7.41%), and potassium (1.7%) were found. In contrast, the major constituents in cast iron included iron (88.3%), carbon (3.7%), …

Assessing Passenger Electric Vehicle Growth Strategies And Their Impacts On Electricity Demand Load And Co2 Emissions In Aceh Province To Achieve Net Zero Emission Target By 2060, Taufik Hidayat, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

The electrification of the transport sector is a crucial pathway for achieving Indonesia’s Net Zero Emissions (NZE) target by 2060. This study assesses the potential impact of passenger electric vehicle (EV) penetration on electricity demand and CO2 emissions in Aceh Province through a scenario-based modelling approach. Two policy-aligned scenarios are assessed: a low-penetration (LP) scenario and a high-penetration (HP) scenario. Using the Gompertz model and the ASIF framework, total CO2 emissions were projected from 2020 to 2060. Results show that although higher EV penetration reduces direct emissions from internal combustion engine (ICE) vehicles, total CO2 emissions increase more significantly under …

Leveraging Convolutional Neural Networks For Through-The-Wall Radar Imaging: Challenges, Impacts, And Future Directions, Tumaini Edgar, Abdulla F. Ally, Abdi T. Abdalla

Tanzania Journal of Engineering and Technology (TJET)

Through-the-wall radar imaging (TWRI) is an essential technology for military and rescue applications; however, its performance in detecting and visualizing high-quality images of targets behind walls is significantly degraded by multipath reflections and signal attenuation. This paper reviews the current state of TWRI and its challenges, and explores the transformative potential of deep learning, particularly convolutional neural networks (CNNs), in addressing these challenges. Peer-reviewed articles published from 2018 to 2024 were analysed to examine CNN applications in addressing TWRI challenges. The analysis reveals that using CNNs, TWRI systems can be more effective by filtering wall distortions, reducing noise, lowering computational …

A Review Of Energy Storage Technologies With Hydro Energy System Design For Off-Grid Electricity, Daniel H. Ngoma, Banet L. Masenga

Tanzania Journal of Engineering and Technology (TJET)

Many renewable energy sources such hydropower—particularly small-scale run-of-river and micro-hydro—offers reliable, low-cost generation. However, their inherent intermittency (due to seasonal flow variations) and inability to instantly match demand necessitate integrated energy storage to ensure a stable, continuous power supply. This review synthesizes contemporary energy storage technologies in the context of their integration with off-grid hydro energy system design.

The study examine a spectrum of storage solutions, evaluating their technical characteristics, costs, and suitability for hybrid hydro applications. Pumped Hydro Storage (PHS), while highly efficient and large-scale, is often geographically constrained and capital-intensive for small off-grid projects. Battery Energy Storage Systems …

Implementation Of The Fourth Industrial Revolution Technologies In Tanzania’S Downstream Oil And Gas Industries, Vitalis John Mwinyi

Tanzania Journal of Engineering and Technology (TJET)

The advent of the fourth industrial revolution (IR4.0) has resulted in the digital transformation of multiple sectors of the economy due to the disruptive nature of the technologies driving the revolution. The technologies have already found their way into the oil and gas industries across the globe, especially in upstream, midstream, and downstream operations. However, the degree of implementation is not the same for these operations, considering the complexities involved, integrated process, the associated risk and investment cost, among others. This study aimed to establish the implementation level of IR4.0 technologies in the downstream operations. A survey method was employed …

Bio-Inspired Materials And Metamaterials For Tunable Biomimetic Properties In Diverse Engineering Applications, Sandeep Suresh Babu

Thesis/ Dissertation Defenses

Nature has always played the role of a design cue for several targeted engineering applications, with designers attempting to mimic the characteristics of natural organisms to have significant advantages in the engineering performance cycle. This dissertation explores the relationship between bioinspired design parameters and material compositions in diverse engineering applications, ranging from mechanical energy absorption to tissue engineering applications. A two-fold objective was followed in the study, where the initial focus was based on the structural design of metamaterial lattices based on geometrical cues observed in the horn structure of bighorn sheep and cuttlebone microstructure of cuttlefish. The advances made …

Acoustic Response Of The Cnt-Reinforced Multilayered Acoustic Foam Composites (Mafc), Trey Brauch

Electronic Theses and Dissertations 2020 - Present

Acoustic metamaterials are engineered materials designed to control and manipulate sound propagation. Many such systems incorporate acoustic foams due to their porous structure, low density, and high specific surface area, which promotes efficient sound absorption. However, a major limitation of conventional acoustic foams -particularly open-cell varieties- is their lack of waterproofing, rendering them unsuitable for underwater or moisture-prone environments. To address this limitation, a multilayered acoustic foam composite (MAFC) was developed as a lightweight, waterproof structure with enhanced sound absorption performance. The MAFC consists of five layers: the first and fifth layers are aluminum foam, providing structural integrity; the second …

Three Degree Of Freedom Wave Energy Converter Design For Resonant Motion, Greg Ballen, David G. Wilson, Rush Robinett, Shangyan Zou, Wayne Weaver

Michigan Tech Publications

As multiple-degree-of-freedom (3-DOF) wave energy converters (WECs) have demonstrated the ability to produce more power than single-degree-of-freedom devices, the challenge of designing buoys for efficient energy harvesting has increased in complexity. In this paper, a cylindrical WEC is designed to naturally resonate in surge, pitch, and heave modes at a specific target frequency of 0.2 Hz. By utilizing a penalty-based optimization method to balance buoyancy requirements with natural resonance, the design achieves minimal control force input, thereby reducing fluctuations in energy output and local energy storage requirements. The performance is evaluated under irregular sea states using a Bretschneider spectrum. Results …

Development Of An Experimental Platform For Hydrogen-Propelled Cold Spray, Michael James Katz

Theses and Dissertations

Cold spray (CS) has gained recent interest as an additive manufacturing process. This process uses high pressure propellant gas to accelerate solid-state powder particles through a specialized nozzle, beyond which the powder deposits onto a substrate as a dense coating and without either material undergoing a phase change. Both nitrogen (N2) and helium (He) are commonly used as CS propellants, with He generally yielding superior results at otherwise similar processing conditions. However, performance advantages of He come with a significant drawback: He is a limited resource that may be sensitive to geopolitical conflicts and, in recent history, has been subject …

Hypersonic Impact Method For Aerodynamics And Convective Heating (Hi-Mach) With Sensitivities, Jeremiah Goates, Logan Freeman, Nathan Hoch, Douglas Hunsaker

Mechanical and Aerospace Engineering Student Publications and Presentations

The purpose of this paper is to present the development of an engineering level code for calculating hypersonic aerodynamics and convective heating, HI-Mach. Novel to this paper are the use of analytic methods for streamline tracing and the direct differentiation of geometric sensitivities for both forces and heat load. Independent panel inclination methods calculate the pressure distribution on the surface of a hypersonic vehicle. Normal shock relations provide the thermodynamic state on each panel. Streamlines are integrated using closed-form streamline equations. Flat plate formulas corrected for compressibility calculate the skin friction coefficient and acreage heat flux on each panel. Formulas …

Further Development Of A Low-Energy Arc-Ignition System For Nytrox/Abs Hybrid Propulsion Systems, Stephen A. Whitmore, Jared S. Coen, Ryan J. Thibaudeau

Mechanical and Aerospace Engineering Faculty Publications

Utah State University has developed a high-performance “green” hybrid propulsion technology based on the unique electrical breakdown properties of 3D-printed acrylonitrile butadiene styrene. Using 3D-printed ABS as fuel, typical startup sequences require approximately 5–15 joules and, once started, the system can be sequentially fired with no additional energy inputs required. The number of possible ignitions is limited only by the amount of fuel. The most technologically mature version uses gaseous oxygen (GOX) as oxidizer and 3D-printed ABS as fuel. While GOX is mass-efficient, it lacks volumetric efficiency unless highly pressurized. Nytrox, a blend of GOX and nitrous oxide, improves propellant …

Engineering Problem Solving In First Robotics Competition, Jingyuan Fu

SACAD: Scholarly Activities

FIRST Robotics Competition is a program in which high school students design, build, and program robots for a new engineering challenge each year. Within that environment, robot development requires more than mechanical construction alone, since successful performance depends on strategy, subsystem integration, software development, and continuous iteration. This poster examines how game analysis shaped the robot’s overall development, including design priorities, system layout, material choices, and coding decisions. It also highlights how programming and tuning were used to improve subsystem performance and increase effectiveness in competition. This project demonstrates how the FIRST Robotics Competition can serve as a practical setting …

Implantable, Sensor-Embedded Vascular Graft Towards Wireless Monitoring Of Stenosis, Nnamdi Dike

LSU Master's Theses

Arteriovenous (AV) grafts are commonly used to provide vascular access for hemodialysis in patients with end-stage renal disease. Despite their widespread use, AV grafts are prone to complications such as stenosis and thrombosis. Early detection of these conditions remains challenging with current monitoring methods too costly or insufficient. This work presents the design, fabrication, and validation of an LC pressure sensor embedded within a model AV graft to enable real-time monitoring. The proposed system integrates a parallel-plate capacitive pressure sensor with a spiral inductor to form an LC circuit embedded within an elastomeric graft wall. The Ecoflex 00-30 dielectric layer …

On The Drainage Vortices Of Liquid In A Container With Two Outlets, Radivoje Stankovic

Electronic Theses and Dissertations 2020 - Present

Vortices that form over multiple drainage ports may exhibit a distinct, periodic alternating behavior, whereby the air core moves periodically between different drainage ports. The physical processes which govern this behavior have not yet been explained, despite the widespread and thorough attempts to describe the flow of water through single or multiple outlets. Early experiments on the alternating behavior of this vortex resulted in a nondimensional relation between the alternating frequency and water height and container geometry with an R2 = 0.91. Subsequent 2D PIV measurements of the flow were performed at different laser heights of 25 mm and 128 …

Mathematical Modelling And Optimisation Of The Reactor For The Esterification Process Of Safflower Oil With N-Butyl Alcohol, Sadritdin Makhamatdinovich Turabdjanov Academician, Hasan Sadriddin Ugli Fozilov, Ozoda Bakhronovna Axmedova, Sadriddin Fayzullayevich Fozilov

Technical science and innovation

This study addresses the mathematical modelling and optimisation of a reactor for the esterification of safflower oil with n-butyl alcohol. To improve process controllability and reduce the need for numerous pilot-scale trials, an ideal-mixing continuous stirred-tank reactor (CSTR) model was adopted. Incorporating reaction kinetics, the effect of contact time on the relative viscosity of the product mixture was analysed. The modelling results indicate that achieving an acceptable degree of feedstock conversion is difficult when a single ideal-mixing reactor is used. Therefore, a CSTR cascade was proposed, and the configuration with N = 2 reactors was selected as the most appropriate …

Manufacturing Of Functional Surface Coatings In The Automotive Industry, Gulirano Saidakhmedova

Technical science and innovation

The development of environmentally sustainable technologies for material processing represents one of the most pressing scientific and technical challenges in modern industrial production. This issue is particularly relevant to the automotive industry, where growing demands for energy efficiency, durability, and environmental safety necessitate the adoption of advanced manufacturing methods. Special attention is given to developing vacuum-based, import-substituting equipment and technologies for producing functional coatings from composite materials with predefined physical, mechanical, and optical properties, including reflective and protective characteristics. Current requirements for mechanical engineering products and production technologies drive the need for innovative approaches to material processing and specialized technical …

Theoretical And Practical Foundations Of Healthcare System Digitalization, Sanjarbek Bekturdiev Sharifboyevich Phd, Muxlisa G‘Ulom Qizi G‘Ofurova

Technical science and innovation

The digital transformation of healthcare represents a key direction in improving the accessibility, quality, and efficiency of medical services. This study examines the main components of eHealth, including telemedicine, electronic health records, cloud technologies, and mobile applications, as well as the role of international organizations in promoting national digital health strategies. Particular attention is given to the current state of digital healthcare in the Republic of Uzbekistan, where significant progress has been made in developing infrastructure and implementing information systems, although challenges related to integration, standardization, and regulatory support remain. The work identifies the main trends in the development of …

Adaptive Multi-Stage Fuzzy Logic Approach With Dynamic Weight Adjustment For Robust Power Transformer Diagnostics, Dilafruz Rustamovna Abdullabekova, Odiljon Muhammadjonovich Kutbidinov

Technical science and innovation

An adaptive multi-level fuzzy logic framework with dynamic weight adjustment for power transformer fault diagnosis and health index assessment was proposed in this study. A comprehensive analysis of existing transformer diagnostic approaches was performed, and their limitations related to static weighting schemes and uncertainty handling were identified. A hierarchical fuzzy inference structure was introduced, integrating multi-source diagnostic data, including dissolved gas analysis, transformer oil quality indicators, thermal parameters, and electrical measurements. At the first level, individual fuzzy subsystems were developed to evaluate partial condition indices associated with insulation degradation, oil aging, and thermal–electrical stress. At the second level, a global …

Development Of New Methods For Calculating Pressure And Energy Losses For Pumping Station Water Intakes, Faxriddin Jaylovovich Nosirov, Oleg Yakovlevich Glovatsky, Jurabek Abdyrahmon O'G'Li Urolov, Abduqodirkhon Samatkhonovich Abdullakhaev, Anvar Mamur Ugli Uzokov

Technical science and innovation

The aim of this study is to improve the efficiency of water resource management methods. Improvements to the water intake of the Karshi Main Canal are considered using calculations of pressure losses at the entry and exit of liquid into the flow, which differ from pressure losses in a stationary medium. The article considers some of the methods for using renewable energy sources, where the change in gravitational potential energy does not depend on the way of using energy and the operating scheme is a gravitational energy pump. The implementation of control and monitoring systems is necessary to ensure optimal …

Refinement Of Wind Speed Estimation At Turbine Hub Height Using Satellite Data And Regression Analysis Under Complex Terrain Conditions, Isroil Abriyevich Yuldoshev, Tulqin Rustamovich Jamolov, Sa'dullo Sayfiddin Ugli Fazliddinov, Jumanazar Farhodjon OʻGʻL Abdurashidov

Technical science and innovation

Reliable assessment of wind energy potential in regions characterized by complex terrain is often constrained by the limited availability of ground-based meteorological measurements. This study proposes an improved regression-based approach for refining wind speed estimates at the wind turbine hub height of 65 m using satellite-derived data from the NASA POWER database combined with a logarithmic vertical wind profile. The proposed methodology is validated using real operational data from a 750 kW wind power plant located in the mountainous Bostanlyk district of Uzbekistan for the period 2018–2021. The regression analysis demonstrates a strong linear relationship between the extrapolated wind speed …