Digital Commons Network^™

Integrating Complete Bond Dissociation In Class Ii Force Fields, Joshua Kemppainen, Hendrik Heinz, Gregory M. Odegard

Michigan Tech Publications

Predicting the physical and mechanical properties of organic materials from purely chemical understandings remains a significant challenge due to the limitations of conventional force fields in molecular dynamics (MD). In this work, we present a novel reformulation of Class II force fields that integrates Morse bond potentials with newly derived cross-term interactions, explicitly capturing complete bond dissociation while maintaining computational efficiency. This reformulated functional form combines the stability of fixed-bond models with the reactive capabilities of bond-breaking force fields, achieving accurate and robust MD predictions across crystalline, semi-crystalline, and amorphous organic systems. Extensive benchmarking confirms its predictive accuracy and speed, …

Adaptive Pi Control Using Recursive Least Squares For Centrifugal Pump Pipeline Systems, David A. Brattley, Wayne Weaver

Michigan Tech Publications

Pipeline transportation of petroleum products remains one of the safest and most efficient methods of bulk energy delivery, yet overpressure events continue to pose serious operational and regulatory challenges. Traditional fixed-gain PI controllers, commonly used with centrifugal pump drives, cannot adapt to varying product densities or transient disturbances such as valve closures that generate water hammer. This paper proposes a self-tuning adaptive controller based on Recursive Least Squares (RLS) parameter estimation to improve safety and efficiency in pipeline pump operations. A nonlinear simulation model of a centrifugal pump driven by an induction motor is developed, incorporating pipeline friction losses via …

Child Occupant Safety In The United Arab Emirates: Crash, Injury, And Anthropometric Analysis, Muhammad Uba Abdulazeez

Thesis/ Dissertation Defenses

The United Arab Emirates (UAE) has one of the highest rates of child occupant injuries and fatalities globally. A comprehensive review of the literature revealed very limited research on child occupant injuries and fatalities in the UAE. All but two of the identified studies relied on data from Al Ain-based sources namely - Al Ain Department of Preventive Medicine, Al Ain Hospital, and Tawwam Hospital - and were restricted to that city. Furthermore, most of these studies were conducted nearly 30 years ago with the two most recent ones (conducted over a decade ago) based on crash data that was …

Development Of New Design Criteria For Coastal Highway Embankment Under Wave-Induced Loading, Udaya Bilas Panta

Master's Theses

In the face of intensifying hurricanes and rising sea levels, Louisiana’s coastal highways, lifelines for communities and commerce, stand increasingly vulnerable. This thesis introduces a pioneering methodology for designing geosynthetic-reinforced highway embankments capable of withstanding wave-induced loading and rapid drawdown scenarios, the most critical failure condition identified in coastal environments. By integrating statistical wave modeling, advanced numerical simulations using SEEP/W and SLOPE/W, and a comprehensive parametric analysis, the study develops a novel hybrid regression formula that accurately predicts optimal reinforcement lengths based on site-specific geotechnical and hydraulic parameters. Validated against Hurricane Katrina data and real-world soil profiles from Cameron Parish, …

Interfacial Gap Prediction In Laser Welding Of Pure Copper Overlap Joints Using Multiple Sensors., Hyeonhee Kim, Cheolhee Kim, Minjung Kang

Mechanical and Materials Engineering Faculty Publications and Presentations

In this study, a novel approach was proposed for predicting the interfacial gap in copper overlap joints by using deep learning and multi-sensor fusion. In this method, an image sensor, a spectrometer, and optical sensors tomography (OCT) sensors were used to develop and validate deep learning models under various gap conditions. The results revealed that the variation in melt pool dimensions, changes in keyhole behavior, intensity variations at specific wavelengths, and keyhole depth derived from the OCT data could be used to accurately predict the interfacial gap. Among the proposed models, a binary gap classification model achieved the highest accuracy …

User Interface And Watchstation Improvements Required For Multi-Vehicle Usv Operations, Val Schmidt, Joshua Bergeron

Faculty Publications

In October 2024, the University of New Hampshire and NOAA’s Uncrewed Systems Office embarked on a mapping mission in the Gulf of Maine, simultaneously operating two DriX Un-crewed Surface Vehicles. Goals of the project were focused on testing hypotheses related to concepts of operation, including the safety of operations, cognitive loading of operators, management of vehicle endurance, vehicle logistics, maintenance and field support, refueling and a host of others.

First-Principles Theory Of Five-And Six-Phonon Scattering, Yi Xia

Mechanical and Materials Engineering Faculty Publications and Presentations

igher-order phonon scatterings beyond fourth order remain largely unexplored despite their potential importance in strongly anharmonic materials at elevated temperatures. We develop a theoretical formalism for first-principles calculation of five- and six-phonon scatterings using Green’s function techniques based on a diagrammatic formalism, and systematically investigate multi-phonon interactions in Si, MgO, and BaO from room temperature to near melting points. Our calculations reveal dramatically different material-dependent behaviors: while five- and six-phonon processes remain negligible in Si even at high temperatures, they become increasingly important in MgO near its melting point (3100 K) and in BaO at intermediate temperatures (1200 K). Most …

Measurement Uncertainty, Barton L. Smith, Douglas R. Neal

Mechanical and Aerospace Engineering Textbooks

This text is based on the graduate Measurements course notes from BLS at Utah State University. It is intended as a textbook for graduate students in engineering or physics or as a reference text.

If one collects several texts on measurement uncertainty, it quickly becomes clear that the measurement uncertainty community lacks a consistent language or nomenclature. This can be confusing to a new reader who may view measurement uncertainty as a very old and settled topic. The lack of consensus on nomenclature likely stems from the lack of a clear winner–a paradigm and nomenclature set sufficiently superior to be …

“How Can Ai Data Centers In The U.S. Meet Projected Electricity Demands By 2030?, Aiden M. Matano

Sustainable Supply Chain Management

The rapid expansion of artificial intelligence is driving a sharp increase in U.S. electricity demand, with AI-driven data centers emerging as a central contributor through 2030. This paper asks how U.S. AI data centers can meet projected electricity needs while simultaneously reducing carbon emissions. Using a supply-chain and systems perspective, it analyzes the full energy chain of AI data centers: upstream electricity supply and grid deliverability, midstream facility design and grid interaction, and downstream operational practices, waste management, and disclosure. Drawing on recent projections from the International Energy Agency, Lawrence Berkeley National Laboratory, and U.S. federal guidance, the paper shows …

Localized Nuclear Utility For Erau Environmental Improvement, Timothy Schroeder, Jacob Blanton, Christopher Anderson

Sustainability Conference

The reliance of Embry Riddle Aeronautical University (ERAU) on energy supplied by Florida Power & Light (FPL), which currently draws large amounts of power from fossil fuel sources, is continuously suboptimal both environmentally and financially. This study proposes assessing the feasibility of deploying a campus scale nuclear reactor tailored to ERAU’s power consumption profile. This serves as a path toward reducing greenhouse gas emissions and limiting dependence on external fossil fuel generation. The methods used are primarily literature review(s), and numerical analysis on comparable use cases. The literature reviews focused on design theory and yield of nuclear reactors on a …

Optimization Of Rheological Models Using Machine Learning-Based Surrogates, Sourav Saha

LSU Master's Theses

This study addresses the challenge of accurately modeling flows of complex, multiphase media through fluid machines, where highly viscous, compressible, and shear-thinning behavior of the medium complicates the construction of predictive models. Such media include slurries, biomass, foods, and other materials of high value and societal importance. A high-fidelity CFD model of a screw-type fluid machine with an outlet flow restriction is developed. The flowing medium is treated as a single-phase, compressible, non-Newtonian fluid. The model incorporates a non-linear pressure-dependent density model and a strain-rate-dependent viscosity law (Cross power law). A parametric study is conducted by varying key rheological parameters …

Scientific Characterization Of Historic Mortars Dating From The 15th-Century Of A Historical Building In Algeria: A Case Study, M. E. Belgacem, N. Rabahi-Touloum, R. Neves, Y. Ouldkhaoua

Journal of Sustainable Construction Materials and Technologies

This research investigates the historic mortars (Aggregate/Binder (A/B) ratio) of a historical patrimony building, dating from the 15th century, in Algeria, for restoration purposes. It is well known that thorough characterization is essential for successful restoration. To this end, several techniques, including Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), and X-ray Fluorescence (XRF), optical microscope were used to characterize the historic mortars. A mechanical test was used to characterize the compressive strength of a historic mortar. For a comprehensive characterization, A/B ratios were estimated using both Digital Image Analyses (DIA) and chemical analyses. The results obtained provided clear information on …

Analysis And Simulation Of The Effect Of Voids In Dually Reinforced Particle And Short Fiber Composites, Matthew Mckinley Luci

Graduate Theses - Mechanical Engineering

This thesis investigates dual-reinforced polymer composites tailored for flywheel energy storage, combining short, chopped carbon fibers for load bearing with iron particulates for multifunctionality. A unified experimental–computational workflow was developed: tensile coupons were fabricated and tested, machine compliance was quantified using neat resin and removed from all curves, and elastic moduli were extracted with robust MATLAB routines. Parallel finite-element models in ANSYS 2023R reproduced the dog-bone geometry with standardized meshing, named selections, and displacement-controlled loading. Four material states—neat resin, resin and iron, resin and short carbon fiber, and the iron and fiber hybrid— were evaluated. Results show carbon fibers dominate …

Cal Poly (Cp) Legged Robot, Sebastian Barboza, Jonathan Mchale, Isabella Sorensen, Isaac Golan

Mechanical Engineering

The Navy spends $60 billion annually on dangerous ship maintenance performed by sailors. To save lives and resources, the Naval Surface Warfare Center (NSWC) is looking for robots to replace sailors and navigate ships to perform various tasks. Robots with tracks and wheels have been most recently explored by NSWC, however they have encountered significant problems navigating the ships, especially through naval ship doorways with a significant ledge. By using a legged robot, our team hopes to solve these problems and have a robot that can navigate the ship with relative ease and stability.

Examining The Perception Of Maritime Instructors In Upskilling And Reskilling Seafarers Towards Decarbonization, Michelle Margallo

World Maritime University Dissertations

No abstract provided.

Environmental Regulations And The Exploitation Of Deep Seabed Minerals : A New Era For The“Mining Code” Of The International Seabed Authority (Isa)?, Mikyla D'Antoinette Frederick-Winter

World Maritime University Dissertations

No abstract provided.

Assessing Marpol Annex V Port Reception Facilities Of The National Port Of Liberia (Freeport Of Monrovia), Barbara Wade Cummings

World Maritime University Dissertations

No abstract provided.

Bending Fatigue In Additively Manufactured Metals: A Review Of Current Research And Future Directions, Md Bahar Uddin, Sriram Praneeth Isanaka, Frank Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Metal additive manufacturing (MAM), also referred to as 3D printing, has proven remarkable in the fabrication of complex metal components in multiple sectors. However, the assessment of this revolutionary process through bending fatigue is frequently impeded due to concerns about mechanical and physical conditions of the printed components. The unique layer-by-layer production process results in varied microstructures, anisotropy, and intrinsic defects that considerably differ from traditionally manufactured wrought metals. This review article aims to integrate and evaluate historical and contemporary research on the bending fatigue of additively manufactured materials. More specifically, the impact of process parameters, build orientation, surface conditions, …

Marine Environmental Protection : An Investigation Into Existing Global Laws Addressing Marine Plastic Pollution, Maryland De Castro

World Maritime University Dissertations

No abstract provided.

Integrating Environmental Impact Assessment Into International Shipping Governance : A Bbnj-Pssa Synergy Framework, Thi Thuy Linh Pham

World Maritime University Dissertations

No abstract provided.

Occupational Safety In Fishing Vessels : A Comparative Analysis Of Namibia, South Africa And Mozambique In The Sadc Region, Fiina Ndakulilwa Twiihaleni Shaanika

World Maritime University Dissertations

No abstract provided.

Optimization Of Aids To Navigation System In Papua New Guinea, Justus Wayne

World Maritime University Dissertations

No abstract provided.

An Assessment Of The Impact Of Illegal Sand Mining On The Coastline Of Liberia, Alphena J. Logan

World Maritime University Dissertations

No abstract provided.

The Role Of Atmospheric Turbulence On Cloud Droplet Distribution And Droplet Impaction On An Airfoil, Arash Shad, Hashnayne Ahmed, ‪Nadim Zgheib, S. Balachandar, S. A. Sherif

Mechanical Engineering Faculty Publications

We conduct turbulence-informed Euler–Lagrange simulations of droplet-laden flow to examine the effects of atmospheric turbulence on droplet impingement characteristics on a NACA 0012 airfoil. We implement statistical overloading, whereby we inject millions of droplets, ranging in diameter from 1 to 160 microns, upstream of the airfoil at an average streamwise velocity of 120 m/s. Within a fraction of a second, these droplets would have either impinged on the airfoil or continued downstream. While the incoming air flow is maintained uniform, droplet injection is informed by ambient turbulence, affecting both the droplet velocity distribution as well as the size-dependent preferential concentration …

Microstructural And Mechanical Characterization Of Aa6082 /Sic/Al2o3 Hybrid Nano Composite Fabricated By Ultrasonic Assisted Stir Casting, Anasmon Koderi Valappil

Theses

The utilization of aluminium alloys has increased rapidly in past decades due to the increasing demand for lightweight and high-performance materials. Among the popular aluminium alloys, AA6082 is widely favoured for its excellent combination of strength, corrosion resistance, and machinability. Most previous work, however, has concentrated on either on micro scale reinforcement or on single ceramic particles, leaving very few experimental studies on the use of hybrid nano reinforcement in AA6082. Therefore, to further enhance its mechanical properties without compromising its inherent advantages, hybrid metal matrix composites were developed using various nano particulates as reinforcements. In this current study, AA6082-based …

Investigation Of Mechanical Performance And Metallurgical Characteristics Of Titanium Grade 2 Tube-To-Tubesheet Joints, Ahmad Hussein Al Tamimi

Theses

Tube-to-tubesheet joints, an integral component of shell and tube heat exchangers, are known for their vulnerability to leakage problems at the joint region due to mechanical and chemical factors coupled with fabrication techniques involved in creating these joints. An ideal condition of manufacturing process parameters and geometrical variables required to produce tube-to-tubesheet joints is highly desired. One of the most promising candidate materials to fabricate tube-to-tubesheet joints is titanium or titanium alloys due to their excellent strength and resistance to corrosion. The present study investigates the structural integrity of three categories of Titanium Grade 2 based tube-to-tubesheet joints comprising of …

Enhanced Air Hockey Robot Performance Through Adaptive Control Algorithim Using Ai-Based Hierarechal Decicion Archeticture, Ayham Majed Salim

Theses

This thesis presents the development of an intelligent air hockey robot that combines precise mechanical design, computer vision, and adaptive control within an AI-based hierarchical decision architecture. The system integrates synchronized stepper motors, high-speed image processing, and a real-time decision framework to achieve competitive gameplay performance. The robot detects the puck using adaptive HSV color segmentation, supported by dynamic calibration that maintains accuracy under different lighting conditions. A two-stage trajectory prediction model, based on exponential decay velocity estimation, enables anticipation of puck motion and improves response time during fast gameplay.

At the decision level, a fuzzy-logic supervisor governs the robot’s …

An Analysis Of Renewable Energy Capture Utilization For Mpulungu Harbour, Dorica Nayame

World Maritime University Dissertations

No abstract provided.

Enhancing Seafarer Competence In Nigeria : Challenges And Opportunities, Alexander Chike Melifonwu

World Maritime University Dissertations

No abstract provided.

Decarbonization And Climate Justice : Challenges And The Effect On Shipowners, Sofiana Kontouri

World Maritime University Dissertations

No abstract provided.