Digital Commons Network^™

Preliminary Study Of Circular Lithium-Ion Battery Thermal Management System With Intermittent Cooling, Muhammad Luthfi, Leo Van Gunawan, Yudhy Kurniawan, Sabda Ikhwal Rahmatullah, Alfarikh Muhammad Daen

Journal of Mechanical Engineering Science and Technology (JMEST)

The active battery thermal management system is important to maintain the lithium-ion battery temperature within the optimum and safe range. However, current research has not considered the potential for excessive energy consumption due to the continuous operation of a fluid flow source, such as a fan. This research aims to investigate the effect of a novel approach called intermittent cooling on the cooling efficacy and energy consumption of the circular-configuration BTMS. Both transient computational fluid dynamic simulation and experiment were conducted in this work with 30 pieces of 18650 Lithium-Ion batteries positioned in a staggered circular configuration. From the result, …

Biomass Demineralization: A Critical Need For Future Biorefineries, Leoncio Santiago-Martínez, Styliani Avraamidou, Alejandro Ayala-Cortés, Ruth Azike, Santanu Bakshi, Chumki Banik, Ezra Bar Ziv, Fei Long, Rebecca Ong, Et Al.

Michigan Tech Publications

Biomass contains up to 14 essential elements that serve as nutrients for plant growth and development, including photosynthesis and enzyme functionalities. These elements in different chemical forms (e.g., minerals) constitute the inorganic fraction of biomass and can cause operational issues in thermal and biochemical biomass conversion technologies. In biomass gasification and pyrolysis processes, for instance, inorganics can cause fouling, tar formation, and corrosion. In catalytic and biochemical processes, inorganics can poison catalysts, alter biochemical pathways, and modify product yields and selectivity. This review provides an overview of the inorganic content in biomass feedstocks, the critical role inorganics play in plant …

Gas Lift Valve Operation Under Elevated Pressure And Temperature Conditions, Pedro O. De Melo Flores

LSU Master's Theses

Gas lift valves are critical components in artificial lift systems, and their performance directly influences well unloading efficiency and long-term production. Current industry models used to correct valve opening and closing pressure for temperature rely on assumptions that have not been extensively validated against experimental data. This study experimentally investigates the opening and closing behavior of injection pressure-operated (IPO) gas lift valves under controlled elevated-temperature conditions. A load rate test bench was modified to include a heating system capable of maintaining valve temperatures up to 220°F. Five gas lift valve designs from multiple manufacturers were tested over a range of …

Comparative Evaluation Of Segmentation-Based And Pose-Assisted Head Temperature Estimation From Uas Thermal Imagery Under Controlled Conditions, Owais Ahmed, Justin A. Guye, Muhammad Hassan Tanveer, Adeel Khalid

Faculty Articles

This paper presents a vision-based framework for detecting humans and estimating head surface temperature from aerial thermal imagery acquired by Unmanned Aerial Systems (UAS). A comparative evaluation of recent object detection architectures was conducted to identify the most stable and reliable model for thermal human detection under varying flight altitudes. The selected framework integrates two head localization strategies, namely, segmentation-based mask slicing and pose-assisted keypoint localization, to extract head regions and compute per-pixel temperature values from radiometric metadata. The results show that cross-domain inference using pre-trained YOLOv11 models achieves reliable human detection across controlled outdoor environments. Between the two pipelines, …

Human Intention Prediction Using Cnn And Lstm Networks In Physical Human–Robot Interactions, Khosro Ghorbani Zadeh

Miners Solving for Tomorrow Research Conference

Advances in robotics and artificial intelligence have increased expectations for interactive robots in eldercare and assistive applications. A key challenge in creating safe and effective systems is accurately recognizing human intent and translating it into meaningful commands for robots to follow. Traditional physics-based models often fail to fully represent human force interactions due to their dynamic nature, while neural networks provide a promising alternative for predicting force-movement intentions. Multi-layer perceptrons (MLPs) show potential, however, they struggle with temporal dependencies and generalization. Long Short-Term Memory (LSTM) networks and Convolutional Neural Networks (CNNs) help address these limitations. This study compares these architectures …

Scale-Dependent Particle Transport Over Urban-Like Roughness In Turbulent Flow, Rae Riddle

Dissertations and Theses

This study employs direct numerical simulation (DNS) to investigate the dispersion of inertial particles in turbulent flow over three-dimensional urban-like roughness at Reτ = 200. Particles with Stokes numbers St = 5, 25, and 100 are tracked over cubic arrays with spanwise spacings Sy from 2h to 32h, where h = δ/8 and δ is the half-channel height, alongside a smooth-wall reference case. The results reveal scale-dependent particle responses characterized by three distinct regimes. First, high-inertia particles (St = 100) align strongly with mean secondary flows, exhibiting organized plumes above roughness elements. Their vertical transport peaks at intermediate spacing …

Construction Of A Deffi Sprayer: Using 3d Printer Methodology And Techniques For Cost-Effective Analysis Using Desi Mass Spectrometry Imaging, Ryan Karst, Savvy Stevens, Luke Amos, Logan Koester, Ethan Newbold, Karson Whitaker

Symposium Projects

Using 3D Printer Methodology and Techniques for Cost-Effective Analysis using DESI Mass Spectrometry Imaging

Cure Sound Project: Library Loudness, Jordan Cosgrove, Adrian Cruz, Lilliana Cantu, Izabella Grinnell, Idaly Oropeza, Maria Gamez, Regina Losoya, Kayla Martinez, April Martinez, Emiliano Rueda

Posters - 2026

The Louis J. Blume Library has three floors. Each floor has a different purpose and expected sound level. Ideal sound levels can vary based on task. Tasks requiring intense concentration may be negatively impacted by high sound levels1. However, for tasks requiring creativity, higher sound levels may be beneficial2-3. The purpose of this study is to examine noise levels on all floors of the library and determine which floor is most suitable for different tasks and studying types.

Agglomeration Of Particles Streaming Down A Zigzag, Juan Llamas

Posters - 2026

Zigzags or “letdown ladders” limit the flow speed of dry grains as they flow downward by gravity when loading silos, ships, barges, railcars, or trucks.

• Reduce cracking and shattering of grains.

• Increase grain shelf life.

• Increase grain resale value. • Increase ability of grain to germinate.

• Reduce generation of grain dust, an explosion and environmental hazard.

How can we design a zigzag that we know will not plug?

Roof Mounted Single-Axis Solar Tracking Platform, German Markaryan, Dean Schultz, Isabella Bravo, Lucas Matter, Quacy Moore, Robert Wang

Mechanical Engineering Senior Theses

The growing need for efficient and reliable renewable energy sources has been increasing in the 21st century. All residential solar panel systems suffer from efficiency losses due to their inability to adjust their angle and a lack of a proper cleaning system. Automated Tracking Light Acquisition System (ATLAS) aims to solve this problem. Fixed solar panels without self cleaning harvest 30% less energy than adjustable counterparts. With an Arduino Nano ESP32 and Raspberry Pi 3B+ controlling ATLAS, it is designed to autonomously log data, have a night mode, have battery safety features and automatically adjust to the trajectory of the …

Pegasus: Vfs 2025-2026 Dbvf, A'Zhae Turay, Elisabeth Canjar, Jack Carpenter, Cheng-Ju Wu, Xander Fruin, Sophia Bennett

Mechanical Engineering Senior Theses

Pegasus is an autonomous electric vertical takeoff and landing aircraft developed for the Vertical Flight Society Design-Build-Vertical Flight competition and designed around the operational needs of early-stage wildfire response. The system was developed to provide rapid aerial situational awareness, stable hover capability, modular payload deployment, and autonomous mission execution in environments where conventional reconnaissance methods may be limited by terrain, visibility, response time, or personnel risk. The final aircraft uses a hexacopter configuration with six electric propulsion units, a modular aluminum airframe, independent propulsion and avionics power systems, a Cube Orange+ flight controller, adaptive landing gear, and a bottom-mounted payload …

Plasmoid Vortex System Retrofit A Sustainability And Efficiency Study On Internal Combustion Engines, Walker Hall

Doctoral Dissertations and Master's Theses

The thesis addresses the persistent inefficiency and environmental degradation caused by internal combustion engines in modern vehicles, a major issue as the automotive industry faces increasing pressure to reduce fuel consumption and greenhouse gas emissions. Internal combustion engines, which power most cars today, convert only about 20-30% of fuel energy into useful work, with the remainder lost as heat and exhaust waste, including carbon monoxide (CO), carbon dioxide (CO₂), hydrocarbons (HC), and nitrogen oxides (NOx). This inefficiency contributes to global carbon emissions, with transportation accounting for approximately 29% of U.S. greenhouse gases in 2021 [1]. As regulatory standards tighten (e.g., …

Unveiling Value In Plastic Waste: Synthesis Of 1,3-Dioxolan-4-Ones From Polylactic Acid And Polyoxymethylene To Enhance Plastic Biodegradation, Mi-Hyun Lee, Joohyun Park, Hyeongyeong Lee, Woo Yeon Cho, Semin Son, Pyung Cheon Lee, In-Hwan Lee, Hye-Young Jang

Mechanical Engineering Faculty Publications

Catalytic plastic upcycling protocols are essential for resolving the environmental and economic challenges associated with massive plastic production and disposal, as they convert complex waste streams into value-added chemicals. We report an efficient acid-catalyzed upcycling strategy for transforming poly(lactic acid) (PLA) and polyoxymethylene (POM) plastic waste. This innovative process directly yielding dioxolanones (DOXs) can be extended to use POM with various naturally abundant α-hydroxy acids. This work significantly expands the high-value chemical portfolio derivable from common plastic wastes. Incorporation of the synthesized DOXs into the poly(L-lactic acid) (PLLA) backbone results in materials with enhanced thermal stability and superior biodegradability. Critically, …

Roadmap On Artificial Intelligence-Augmented Additive Manufacturing, Ali Zolfagharian, Liuchao Jin, Qi Ge, Wei-Hsin Liao, Andrés Díaz Lantada, Francisco Franco Martínez, Tianyu Zhang, Tao Liu, Charlie C.L. Wang, Mohammad Hossein Mosallanejad, Reza Ghanavati, Abdollah Saboori, Alejandro De Blas De Miguel, William Solórzano-Requejo, Yi Cai, Xiangyang Dong, Huangyi Qu, Najmeh Samadiani, Guangyan Huang, Austin Downey, Yanzhou Fu, Lang Yuan

Faculty Publications

Artificial intelligence-augmented additive manufacturing (AI2AM) represents a transformative frontier in digital fabrication, where artificial intelligence (AI) is embedded not as a peripheral tool, but as a central framework driving intelligent, adaptive, and autonomous additive manufacturing (AM) systems. The objective of this Roadmap is to present a comprehensive vision of the state-of-the-art developments in AI2AM while charting the future trajectory of this rapidly emerging field. As AM applications continue to expand across diverse sectors, conventional design and control strategies face growing limitations in scalability, quality assurance, and material complexity. AI uses tools like computer vision, generative design, and large language models …

X-Ray Tomography Of Damage Dynamics In Advanced Materials Using A Laser Wakefield Accelerator, Vigneshvar Senthilkumaran, Nicholas F. Beier, Sylvain Fourmaux, Peter Kenesei, Sean Dobson, Joël Maltais, Alvaro R. Arce-Borkent, Tait Richards, Michael G. Lipsett, Le Zhou, John A. Moore, Amina E. Hussein

Mechanical Engineering Faculty Research and Publications

Additively manufactured (AM) metals offer the potential for customizable, cost-effective components, but qualification and certification are crucial. Key to this process is understanding pore dynamics under stress, typically analyzed using micro-computed tomography. This study introduces laboratory-scale “betatron” x-rays from laser wakefield acceleration as a high-throughput alternative for x-ray tomography of advanced materials, such as AM AlSi10Mg alloys. Coupled with 3D finite element modeling, this method provides detailed insights into stress-porosity interactions. The approach delivers high-resolution scans, revealing that pore shape and local triaxiality significantly influence fracture dynamics, supporting advanced material characterization. This work also demonstrates the potential and versatility of …

Numerical Study Of Nutrient Mixing In Trabecular Bone In Microgravity, Disuse And Normogravity, Sagar Gharti

Doctoral Dissertations and Master's Theses

Mechanical loading is known to regulate bone remodeling by driving interstitial fluid flow which stimulates cells and drives nutrient transport within the trabecular network. In microgravity, the absence of mechanical stimulation or loading suppresses convective flow processes, causing diffusion-driven nutrient mixing and renewal, and accelerated bone loss. This thesis investigates how oscillation frequency and trabecular bone density jointly control nutrient mixing and wall shear stress within trabecular cavities.

A computational fluid dynamics (CFD) framework is developed in STAR-CCM+ using a soft-cap oscillation model that mimics cyclic compression. Three idealized trabecular morphologies are simulated across different frequencies to represent microgravity or …

Evaluating Uav Visual-Inertial Odometry Trajectory Error And Feature-Level Metrics Over Repetitive Floor Patterns, Anass El Mekkoussi

Doctoral Dissertations and Master's Theses

Visual-Inertial Odometry (VIO) is a widely used state estimation technique for Uncrewed Aerial Vehicle (UAV) navigation in environments where Global Navigation Satellite System (GNSS) signals are unavailable. VIO systems that rely on visual feature tracking are susceptible to performance degradation when operating over surfaces containing repetitive visual textures, where visually similar features can produce ambiguous correspondences that introduce errors into the trajectory estimate. Despite the prevalence of repetitive textures in indoor UAV operating environments such as warehouses, manufacturing facilities, and infrastructure corridors, the specific impact of different repetitive pattern geometries on per-surface VIO accuracy has received limited systematic study, and …

Materials Testing Furnace 2026, Austin Gregson, Lucas Lafayette, Mekhi Hale

Mechanical Engineering Senior Theses

This thesis presents the design, analysis, manufacturing, and testing of a material testing furnace for its intended use at Santa Clara University. The goal of this project is to develop a cost-effective and adaptable furnace capable of providing a controlled hightemperature, inert environment for material characterization. The furnace incorporates welded aluminum chambers, stainless steel load-transfer rams, an argon-based atmospheric control system, and planned tungsten heating elements for reaching temperatures up to 2000 ◦C. Trade-off analyses were conducted on the ram cooling channel geometry as well as the choice of coolant through both plates and rams. Manufacturing efforts were focused on …

Pool Pump Controls For Load Shifting, Andrew Minocha, Angelo Piziali, Cade Benner, Brinley Chrzanowski

Mechanical Engineering Senior Theses

Residential swimming pool pumps represent the second largest source of energy consumption in California homes, and with approximately 1.3 million pools operating across the state, they collectively represent a significant opportunity for grid-level load flexibility. This project presents the design, construction, and commissioning of a proof-of-concept laboratory test rig developed to validate a load-shifting algorithm on a commercially available variable-speed pool pump. The system retrofits a donated Pentair Intelliflo3 VSF pump with an external Raspberry Pi 4 controller that commands pump speed through relay-based digital inputs and logs hydraulic and electrical performance data in real time. A simulated pool filtration …

Cure Sound Project: Study In Silence?, Quezia Abrao, Deeya Bhadresa, Elisa Castro, Fiona Coulbourne, Carlos Flores, Lizzeth Holguin, Lazarus Maldonado, Jeremy Mares, Andrew Martini, Nicole Matthews, Katherine Montero, Mariana Reyes, Jacob Rodriguez, Julieta Ruiz, Eliana Sanchez, Gabriela Varela

Posters - 2026

Difference in sound levels in study areas across campus can affect students’ ability to work and learn efficiently 1.

According to the WHO, safe sound levels are measured to be around 70dB 2. Some study areas on campus experience sound levels exceeding the safe threshold. Unsafe sound levels are considered to be at or above 85dB 3. These unsafe and excessive noise levels negatively affect a student’s ability to concentrate and work efficiently which correlates to a decrease in class performance, attention deficits, and stress 4.

This study aims to get a base-line measurement of dB levels in common study …

Bio-Payload Senior Design Report, Connor Bishop, Oliver Goodall, Marcus Kirk, Gabby Robles, Anish Shanmuganathan

Interdisciplinary Design Senior Theses

This project focuses on the design and development of an autonomous experimental platform capable of conducting cellular biology experiments in a well plate within a CubeSat environment. The system integrates microfluidics, robotics, and onboard sensors to remotely initiate experiments, monitor them, and collect data without human intervention. The objective is to create a platform for automated biological experimentation in microgravity, while reducing reliance on ground-based control and increasing mission efficiency and reproducibility. The team used Saccharomyces cerevisiae to assess the biocompatibility of the well plate and monitor changes in cell culture, including optical density and cell viability.

2026 (Spring) Ensi Informer Magazine, Morehead State University. Engineering Sciences Department

ENSI Informer Magazine Archive

The ENSI Informer Magazine published in the spring of 2026.

Engineering Cryogenic Thermal Links And Transport Systems For Conduction-Cooled Superconducting Cavities, Jacob B. Lewis

Mechanical & Aerospace Engineering Theses & Dissertations

The Thomas Jefferson National Accelerator Facility (Jefferson Lab) is currently developing a prototype conduction-cooled 915 MHz SRF cryomodule proposed for industrial use, capable of increasing the energy of an electron beam with 5 mA current by ~ 4 MeV. Two Nb3Sn resonant cavities are under development for this project, in which cryogenic cooling is provided by closed cycle refrigerators (cryocoolers). One cavity utilizes high-purity electroformed copper on the outer surface to provide heat extraction from the cavity, the other relies on high-purity aluminum thermal links. This thesis investigated the thermal conduction pathways between the cavities and cryocooler cold heads, with …

Observations Of An Oscillatory Mechanochemical Reaction Between Tetrathiafulvalene And Chloranilic Acid, Alastair Deans

Physics Theses & Dissertations

Mechanochemistry is the study of chemical reactions driven by the input of mechanical en ergy in addition to thermal activation. Mechanochemical reactions from powders are carried out by manual grinding or milling using various types of ball mills, or in twin extruders. While mechanochemistry has great potential affording economically and environmentally advantageous “green” synthetic methods, a drawback is that its chemical mechanisms are not well understood. One example of such a reaction currently under study involves tetrathiafulvalene, an organic elec tron donor with two polymorphs (orange and brown), and chloranilic acid, an electron acceptor. Previous results show that neat grinding …

Enhancing Nasa Sounding Rocket Capabilities Through Composite Material Adoption, Robert Burth

Mechanical & Aerospace Engineering Theses & Dissertations

Sounding rockets are a suborbital research platform employed by NASA for heliophysics, astrophysics, geospace science investigations, and for technology development. They follow semi-parabolic trajectories and are launched using surplus military, and commercial, solid-propellant rocket motors. NASA sounding rocket payloads are comprised of standard, modular subassemblies, designed to perform specific functions critical to achieving specific mission success criteria.

Since the program’s inception, payload length and mass have trended upwards, limiting the capability of the platform to reach exospheric apogees and decreasing the time above critical altitudes to observe solar and celestial targets. To offset this trend, composite materials may be of …

Quantum Spin-Like Behavior Of Elastic Guided Waves: Quantized Geometric Phase For Nde And Shm, Md Ebrahim Khalil Bhuiyan

Theses and Dissertations

Ultrasonic guided waves are widely used in nondestructive evaluation (NDE) and structural health monitoring (SHM) for detecting defects and damage in engineering materials and structures. Conventional diagnostic features, such as attenuation of wave amplitude, shifts in time-of-flight, and frequency variations are widely used for damage identification. However, these metrics are inherently sensitive to environmental and operational variations, including temperature, pressure, humidity, sensor coupling conditions, boundary constraints, and external loading. Such sensitivities introduce significant uncertainty in signal interpretation, often obscuring damage-related signatures. Recent advances in wave physics have revealed that elastic guided waves exhibit intrinsic spin angular momentum (SAM), arising from …

Development And Optimization Of Aluminum-Water Reactors For Efficient And Sustainable Hydrogen Production, Guru Prasad Dhungel

Theses and Dissertations

Hydrogen is a promising clean energy carrier; however, safe, controllable, and on- demand hydrogen generation remains a significant engineering challenge. Aluminum– water reactions offer high theoretical hydrogen yield, but practical implementation is limited by oxide passivation and difficulty in maintaining stable thermal and pressure conditions.

This study investigates hydrogen generation from aluminum foam–steam reactions under controlled temperature and pressure using engineered reactor configurations. Three reactor designs, horizontal, vertical, and cylindrical—were experimentally optimized, developed and evaluated to enhance hydrogen production rate and pressure stability without chemical additives. The experiments focused on heat transfer behavior, steam management, pressure buildup, and reaction stability. …

Strain-Induced Oxygen Vacancy Effect On Thermoelectric Properties In Oxide Thin Films, Ebenezer Seesi

Theses and Dissertations

The development of highly efficient and cost-effective thermoelectric (TE) materials is critical for converting waste heat into electricity in advanced power generators. For high-temperature TE applications, transition metal oxides (TMOs) have attracted significant interest because they are comparatively safe, earth-abundant, and stable under oxidizing conditions where many conventional heavy-metal and chalcogenide TE materials degrade. However, the TE performance of TMOs is limited by the intrinsic trade-off between the Seebeck coefficient (S) and electrical conductivity (σ), both of which depend inversely on charge carrier concentration. This constraint limits the achievable power factor (PF = S²∙σ) and remains a central obstacle for …

Plasma Dynamics And Chemistry In Atmospheric Pressure, Ayoub Al Wahaibi

Theses and Dissertations

Atmospheric-pressure plasmas are attractive for practical chemical and energy applications because they can be generated without vacuum systems and can produce reactive environments under relatively mild bulk conditions. However, these discharges are often non-uniform and highly sensitive to operating conditions, especially when water or multiphase flows are introduced. This dissertation investigates how atmospheric- pressure plasma behavior and plasma-driven chemistry change in three challenging but application-relevant regimes: water-mist dielectric barrier discharges (DBDs), multiphase plasma-assisted fuel reforming, and striated AC glow discharges. The work combines optical and electrical diagnostics, imaging, chemical analysis, and time-dependent analysis to connect discharge characteristics with measurable chemical …

Deep Learning Models For Anomaly Detection In Industrial Inspection, Jiawei Guo

Theses and Dissertations

Anomaly detection plays a pivotal role in ensuring the longevity and safety of engineered systems, particularly in domains where defects can have significant operational or economic consequences. From internal damage in structural parts to subtle visual defects in manufactured components, identifying abnormal patterns requires models that are both computationally efficient and suitable for real-world deployment. This dissertation explores deep learning-based solutions designed to address these challenges, with a focus on Structural Health Monitoring (SHM) and industrial defect inspection under real-world scenarios.

This dissertation first addresses the problem of efficient and reliable component- level perception with limited supervision and strict hardware …