Digital Commons Network^™

Me443 Turbine Timing System, Jacky Liang, Michael Ayman Habib, Julio Cesar Gutierrez Jr., Eric Tran

Mechanical Engineering

No abstract provided.

Composite Carrier, Thomas W. Clarke, Kaden T. Guevarra, D'Anna M. Jennings, John F. Tomas

Mechanical Engineering

The Composite Carrier project developed and tested a proof-of-concept system to improve safety and accessibility in the Cal Poly Composites Lab. The system enables users to retrieve composite material rolls from elevated storage racks without using ladders, reducing fall hazards and improving material handling. The final design integrates rack-mounted rotary latches, a ground-level pulley release mechanism, and a custom Genie dolly attachment with a foldable cradle. Verification testing demonstrated that the prototype could securely retain representative roll loads, support repeated retrieval and placement, and improve operator safety, while also identifying future refinements such as reducing attachment width for improved rack …

Golf Ball Marking Machine, Isabella Brinkman, Erin Maxwell, Benjamin Nash, Matthew Nicacio

Mechanical Engineering

The Golf Ball Marking Machine was designed, manufactured, and tested to provide a compact and cost-effective solution for applying durable identification markings to golf balls. The system integrates a gravity-fed hopper, singulation mechanism, motorized marking chamber, and automated discharge system to process golf balls with minimal operator intervention. A computer control system coordinates the marking cycle, enabling consistent application of a circumferential stripe. Verification testing demonstrated compliance with requirements for size, weight, power consumption, safety, and marking durability while maintaining a tabletop size footprint. The prototype achieved an average throughput of 5.43 balls per minute and successfully validated the feasibility …

Project Strata, Hobbs Hegedus, Antony Chen, Adrian Scancich, Peter Constantine Psefteas, Ryan Kreis Roth, Jack Douglas Mitchell

Mechanical Engineering

Project STRATA is a lunar sample acquisition and storage system developed in support of NASA’s Artemis mission objectives and the 2026 NASA RASC-AL competition. The overall mission concept utilizes a dual-rover architecture consisting of HARVEST, a sample collection rover, and SILO, a storage rover designed to preserve and organize lunar ice-regolith core samples collected from permanently shadowed regions (PSRs) near the lunar south pole. These regions contain scientifically valuable volatile-rich materials but present significant challenges due to extreme cryogenic temperatures, abrasive lunar regolith, and the absence of solar energy.

This report is a collection of all major work from the …

Custom Animatronic Puppet, Jake Schuman, Fredy Herrarte, Madison Reedy, Jackson Reynolds

Mechanical Engineering

This project involved the design, fabrication, and implementation of a custom audio-animatronic puppet modeled after Dr. Brian Davis for the California Polytechnic State University Mechanical Engineering Department. The objective was to create an expressive, lifelike character capable of synchronized speech, head movement, arm gestures, and seated-to-standing motion while demonstrating the integration of mechanical design, controls, manufacturing, and artistic fabrication.

The final system consists of an 18-degree-of-freedom animatronic platform utilizing servo-driven facial and upper-body actuation combined with a pneumatic standing mechanism. A modular aluminum and 3D-printed structural framework was developed using SolidWorks and validated through engineering analysis. Character shells were digitally …

Compressor Rotor Joints And Interference Fit Study, Isabela Jimenez, Aubrey Perez, Isaiah Guerrero, Jireh Velasquez

Mechanical Engineering

Solar Turbines need a comprehensive study on the effects axial and radial inference fits have on turbine compressor rotor stiffness. The aft weldment of the compressor has press-fit dowel pins and pilot joints to connect one weldment section to another. These fits need to be assessed through a finite element modal analysis, as well as practically tested through modal impacts to investigate how the fits affect the stiffness of the turbine’s connected weldments. The experimental data will be used to validate the finite element analysis (FEA) model.

Raytheon Rtx Autonomous Vehicle Competition (Avc) - Unmanned Ground Vehicle (Ugv), Bryant Jonathan Martinez-Bautista, Geovanni Lara, Jared Herrera, Jose Barrera

Mechanical Engineering

Raytheon RTX has four universities participating in a competition to successfully complete various challenges with a UAV and UGV including navigation and landing. The students must work collaboratively to integrate and manufacture a working UGV that is compatible with the UAV.

Our sponsor is Raytheon, more specifically Mr. Luis Esparza. Important stakeholders also include Cal Poly and the entire team of ME & CPE working on the project. Raytheon and Luis are looking for innovative solutions that can be applied for real world scenarios where UAV’s and UGV’s are applied. Cal Poly is gaining recognition, and the team is gaining …

Peltier-Based Hydration Accumulation Terminal (P.H.A.T.), Jenner Mucher, Ethan Pace, Renee Robolledo, Sabrina Luo, Taehoon Lee, Tarsem Pal

Mechanical Engineering

The objective of this project is to design an innovative potable water dispenser capable of safely delivering hot, ambient, and chilled water on demand for human lander missions. The system will support astronauts’ hydration and food rehydration needs while minimizing mass, power, maintenance, and contamination risks in microgravity and partial-gravity environments. Current spacecraft dispensers, such as the International Space Station (ISS) system, provide only heated water and have limited temperature control, cleaning accessibility, and microbial resilience. Building on NASA heritage designs and lessons learned from the ISS Potable Water Dispenser, this project advances a lighter, simpler, and more energy-efficient concept …

Mass - Modular Acoustic Suppression System, Julia Megargle, Michael A. Milner, Lucas Kaemmererer, Jonathan Corvera, Gabriel Choi, Emmi Cayer

Mechanical Engineering

The Modular Acoustic Suppression System (MASS) is a mass tuned damper that reverberates a membrane atop a cavity to absorb select acoustic frequencies produced by the Environmental Control and Life Support Systems (ECLSS) within NASA's Artemis Human Lander. The height of the reverberation chamber is adjusted to mitigate a range of varying tonal frequencies within the human lander.

Electronic Bike Chopper, Caleb S. Bermack, Joey Lederer, Ethan Dea, Evan Herrera, Fred Agregado

Mechanical Engineering

Our sponsor, David Royce, built an initial e-bike chopper prototype and desired an improved, next generation version. Our team designed and manufactured an electric bicycle to achieve the rugged visual style of a classic chopper motorcycle while improving stability and usability. The team built a functional E-Chopper prototype using a 4130 steel frame, custom dropouts, a long front fork, wide rear tire, ape-hanger handlebars, and prebuilt electric components such as the battery, hub motor, controller, throttle, and display. The design focused on reducing excess weight, improving frame rigidity, and meeting California e-bike regulations.

Me3328 Buckling Lab, Willem Bitterolf, Samantha Flores, Jacy Gonsalves, Brooke Thompson

Mechanical Engineering

The objective of this senior design project is to design and develop an instructional buckling apparatus (hereafter referred to as a “buckling tester”) to enhance student comprehension of column buckling behavior through direct experimental investigation. The apparatus is specifically intended to bridge the gap between theoretical predictions and observed physical response of structural column members subjected to axial compressive loading. In particular, the system will allow students to examine how column behavior transitions between Euler’s elastic buckling theory, which governs long, slender columns, and the Johnson parabolic formula, which more accurately describes intermediate and shorter columns influenced by material yielding. …

Guitar Pickup Testing Fixture, Koen Graue, Ethan Rezentes, Max Schecter, Timothy Webb

Mechanical Engineering

Small guitar pickup manufacturers and hobbyists have an interest in developing guitar pickups with unique tonal characteristics and responses, but currently lack a reliable way to test these pickups and characterize their sound. I.M. Bohannon Mechanical Design approached the team to develop a solution to this problem. In response, the team researched current technologies, customer needs, and existing products on the market to define the scope and requirements for a guitar pickup testing fixture. This report documents the work completed during the project scope and definition phase of Cal Poly's senior project process. It discusses researched topics and existing solutions, …

Autonomous Vision-Based Litter Collection Rover, Dante Michael Benedetti, Benjamin Scott Tavares, Nathan Heil

Electrical Engineering

This report documents the design, implementation, and testing of an autonomous litter-collection rover developed as a Senior Project Design Lab (EE 460/463/464) at California Polytechnic State University. The rover integrates autonomy, computer vision, embedded real-time control, mecanum-wheel omnidirectional mobility, and a two-degree-of-freedom robotic arm to detect, approach, and collect small ground-level litter such as bottles, wrappers, and paper fragments.

The system uses a two-layer compute architecture: an NVIDIA Jetson Orin Nano running ROS 2 for perception, SLAM, and path planning, paired with an STM32L4A6ZG microcontroller for real-time motor control and odometry. The robot is built on a multi-level aluminum frame …

Table Tennis Training Instrument (Ping Pongers), Derick Alvarado, Peter Sandberg, Andrew Wong

Mechanical Engineering Senior Theses

Table Tennis is an extremely popular sport worldwide, boasting an extensive market. However, it is a sport that generally requires other people to both play and practice with. The goal of this project was to create a machine that would serve table tennis balls for the purpose of individual practice. The machine was meant to fill the niche that other machines of the same type filled by allowing individuals to practice on their own without the assistance of another player or a coach. The main goal of the project was to offer a market competitive device, sharing the same basic …

Inductive Train Transport System, Nicholas Root, Devon Gibb, Ryan Cinarkaya, Davis Letsinger

Mechanical Engineering Senior Theses

Light rail systems can move large numbers of people at relatively high speeds as part of the transit networks critical to dense urban centers, lowering greenhouse gas emissions. However, costs associated with traditional light rail systems are incredibly high and hinder the implementation and expansion of such systems. In this paper, we detail the potential implementation of an inductively-charged, battery-powered light rail system with the potential to lower implementation and expansion costs. This system is compared to existing public transit networks and details of the subsystems required for the successful operation of the planned light rail system are established. As …

Camless Valve Engine, Berkeley Burbank, James Thomas Daniel, Haydn Fischer, Nicos Katigbak, John Holden Kleiner, Martin Raabe

Mechanical Engineering Senior Theses

This project focuses on the design and validation of a camless engine valve system as an  alternative to traditional camshaft-based valvetrain architectures. Conventional engines rely on  fixed camshaft profiles that limit performance and efficiency across varying operating  conditions. The goal of this work is to replace both the camshaft and throttle body with a  pneumatically actuated system capable of independently controlling valve timing, lift, and  duration in real time. By removing the mechanical constraints of a camshaft, the system has the  potential to optimize engine operation across all RPM ranges, improving efficiency and overall  performance without requiring major changes to …

Hospital Bed Tray Table, Ava Mikeska, Sara Chamness, Samantha Kenney, Kaitlyn Ould

Mechanical Engineering

This project documents the design and development of a collapsible hospital bed tray table created through the Mechanical Engineering Senior Project program at Cal Poly, San Luis Obispo. The goal of the project was to reduce the floor space occupied by existing overbed tray tables while preserving the functionality, stability, and durability expected by patients, visitors, and healthcare staff.

The final design modifies a commercially available overbed tray table by incorporating a folding tabletop hinge mechanism and a telescoping base. The hinge allows the tabletop to lock in both the upright and stowed positions, while the telescoping base retracts to …

Thermosiphon Lab Experiment, Ella C. Perry, Zach Barry, Madison K. Felton, Lane A. Hunter

Mechanical Engineering

The Cal Poly Mechanical Engineering Department aims to develop a new lab centered on a thermosiphon solar system. This lab will introduce the operating principles of thermosiphons while integrating concepts from heat transfer, fluid dynamics, and thermodynamics. A thermosiphon functions by heating water using thermal energy. The lab will examine the efficiency of this energy transfer. The final lab will be tailored to enhance student learning while ensuring ease of use for the Mechanical Engineering Department.

25-26 Mecc: Magnetic Thread Wave Energy Converter, Adolfo Torres Flores, Maya Malay, Grayson Houghton, Chase Eavis, Ramyasree Kaja, Tyler Chin, Malia Merager, Chad Haines, Noah Borkum, Raina Moore

Mechanical Engineering

Remote coastal Alaskan villages face significant challenges accessing reliable and affordable electricity due to their geographic isolation and limited connection to central energy grids. These communities often depend on expensive and environmentally unsustainable diesel generators which are difficult to supply and operate. They require a new renewable, affordable, minimal maintenance power solution to decrease their reliance on fossil fuels and promote sustainable development in the region. Although several wave energy converters exist, none adequately suit the needs of these coastal villages, therefore a new design is required to support them. This project will be undertaken by three interdisciplinary teams made …

Smart Sleeve, Evan Abalos, Bright Jung, Owen Bowling, Wyatt Eberhart

Mechanical Engineering

Quantifying human arm muscle activity is essential for understanding human movements and helping individuals who suffer from motor or neurological impairments such as stroke or traumatic brain injuries. Today, these individuals, as well as clinicians, researchers, and athletes, face many challenges when using the traditional surface electromyography (sEMG) systems to monitor muscle activities, including complex setup, restricted mobility, discomfort, inconsistent placement of electrodes, and lack of accuracy. Therefore, a comfortable EMG sleeve device that accurately measures arm movement without interfering with daily tasks is needed, which the team will be designing, manufacturing, and testing as their senior project. In addition, …

Mobile Transfer Assist (Mta) Device, Ashley Homuth, Garrett Schnack, Will Bruner, Jacob Flores

Mechanical Engineering

The Mobile Transfer Assist (MTA) device was developed to assist caregivers with seated-to-seated transfers while reducing physical strain. The device uses a manually operated hand winch and pulley system to raise a user into a semi-standing position, allowing safe transfer between locations. The final design emphasizes portability, affordability, ease of use, and user safety through a modular frame, transfer sling, knee supports, and locking caster wheels. A verification prototype was fabricated and tested, demonstrating successful operation and compliance with project requirements established by VTC Santa Maria.

Hydropower Collegiate Competition 2026, Andres R. Arreola, Sammy D. Taporco, Kathryn E. Tinney, Ahmer S. Dhillon

Mechanical Engineering

The Hydropower Collegiate Competition (HCC) is sponsored by the Department of Energy’s (DOE) Water Power Technologies Office (WPTO) and is meant to offer university students an opportunity to solve complex hydropower challenges, build industry connections, explore career connections, and obtain a greater knowledge of hydropower’s potential in the United States. For this year’s competition, our team investigated a potential in-conduit hydropower site in California. Our work included creating a design package for a crossflow turbine related to our selected site and completing the community connections challenge. We also completed a siting and design report, community connections report, design and siting …

Clipped - A Clipless Bike Grip System, Colin P. Root, Jay Vaughan, Austin Mills, Oscar Weir

Mechanical Engineering

This bike grip system works by connecting a magnetic brace to magnetic pucks installed on handlebars to secure the rider. The brace is affixed inside a glove and connects to two retractable pucks to secure a rider using magnetic force only.

Process Improvement For Thermal Barrier Coating Masking Applications, Katherine Meezan, Aiden Senn, Saksham Giri, Katelyn Perez

Mechanical Engineering

Solar Turbines, a gas turbine manufacturer, needs a more efficient method to prevent the application of a thermal barrier coating (TBC) to select areas of their combustion liners during manufacturing. Currently, the process is labor, material, and time intensive: reusable masking tools should increase the efficiency of the TBC process.

This project is sponsored in full by Solar Turbines, and is under the guidance and administration of three Solar Turbines engineers: Chris Noone, Rick Rogers, and Carson Roff. The project is mentored by Cal Poly senior design Coach, Rick Lasko. This project will be completed by a team of four …

Me3328 Combined Loading Beam Bending Lab, Alejandro Islas, Viswesh Vancheeswaran, Owen Spencer, Henry Andrews

Mechanical Engineering

Serving as a new laboratory experiment for ME 3328 (Design for Strength & Stiffness), strain gauges were adhered, wired, and calibrated on a cantilever beam lab apparatus capable of undergoing pure bending, pure torsion, and combined bending.

Implementation Of A Line-Scan Camera Triangulation Sensor For A Ball Balancer, Jackson R. Mclaughlin

Master's Theses

Ball Balancer or Ball on Plate systems are used for education and research in control theory. These consist of a plate which can be actively tilted, with a ball rolling on the surface. Students are challenged to model the dynamics of the system and implement a control loop which is capable of stabilizing the ball by actuating the plate.  The mechatronics group at Cal Poly is developing hardware for one of these ball-balancer systems, for future use in the Mechanical Engineering curriculum.

The position of the ball relative to the plate must be measured in order to control and stabilize …

Simulation Of Powder Spreading For Metal Additive Manufacturing, Florence Duff

Master's Theses

The powder recoating process for Laser Powder Bed Fusion requires iterative experimentation to develop the correct process parameters that will result in high quality parts. There currently lacks good spread quality metrics and models for optimizing spread quality. A machine that simulates the powder spreading process was built to streamline the process of selecting process parameters for specific types of powders without having to operate the full laser system. The parameters investigated were the layer thickness and spreading speed. The response variables were metrics developed to assess spread quality: the percentage of the build plate covered by powder and the …

Wind Power Turbine Pitching, Sierra Bindseil, Olivia Hoffsis, Izik Hingeley, Tucker Donahue

Mechanical Engineering

It is crucial that wind turbines are able to control the angle of their blades relative to the wind for optimal performance, efficiency, and safety [1]. This project will design a pitching mechanism for the Cal Poly Wind Power turbine that will compete in the Collegiate Wind Competition (CWC). Currently, for full scale wind turbines, the industry standard design includes the pitch of each blade being controlled by its own individual motor [2]. Because of the smaller scale of Cal Poly Wind Power’s turbine, along with power usage constraints, three separate motors are not a practical approach. Cal Poly Wind …

Off-Grid Cabin Hydroelectric Generator, Keller Feltman, Lance Savatgy, River Perino, Jesse Valencia

Mechanical Engineering

This project developed a portable hydroelectric generator intended to provide low-power electricity generation for an off-grid cabin in Alpine County, California. The system was designed to utilize naturally occurring creek flow to generate electrical power while remaining portable, durable, and environmentally conscious.

The final system consists of an axial-flow turbine, belt-driven generator subsystem, waterproof electronics enclosure, aluminum support frame, and integrated wildlife protection screening. Engineering analysis was performed to estimate hydraulic power availability, turbine performance, drivetrain requirements, and component lifespan. These analyses guided the selection and development of the final design.

Throughout prototype testing, several design modifications were required. Initial …

Multi-Ton Bin Transport Device, Cole Kramer, Ruth Stirrup, Fabian Ruiz, Daniel Ramirez

Mechanical Engineering

This project sought to solve a problem at the Water Resource Recovery Facility in San Luis Obispo with the transportation of multi-ton bins on-site. Their current solutions prove ineffective, as they damage their equipment and the concrete pad, as well as pose major safety risks to the operators moving these bins. The Facility requires the bin transport design to be low-cost, effective, and without risk of damage to the bins or surroundings, while maintaining the integrity of the bins. This project presents a conceptual design that is similar to a scissor lift, integrated into a trailer which will connect to …