Digital Commons Network^™

Van Accessibility, Ann Larson, Camelia Anne Noureddine, Stephanie Rose Ruzicka, Kayla Joanne Gowey

Mechanical Engineering

The SLO Achievement House provides resources and activities for their clients, including daily trips to different parts of the community, to keep their clients connected to society. These trips require the clients, many of whom struggle with general mobility and strength, to step up to the high entrance of a van or company car. This daily activity poses a challenge both physically and emotionally for the clients. The current solution utilizes commercially available step stools, which lack handrails, overall stability, and adequate step depth. The Achievement House needs a stool or ramp tailored to their client’s needs and their specific …

7lr-C Upper Limb Dancing Prosthetic, Victor Ochoa, Zoe Kelemen, Ged Mulingtapang, Marley Paltiel

Mechanical Engineering

Ella Wallis, a student at Cal Poly and performer in the Cal Poly Drag Club with a trans humeral upper limb difference, wants a prosthetic device that allows for a large range of motion and high degree of articulation to help them better dance in the style of voguing, allowing them to express themselves further while performing. The prosthetic arm is body-driven and relies on momentum to reposition. It attaches to the user through a harness, which is clipped to a socket with elastic straps to not impede the shoulder’s range of motion. The design contains urethane resin, aluminum, stainless …

Drone Package Delivery System, Aiden Tyler Sim, Ryan Anders O'Toole, Matthew Karl Wyant, James Shaw Glanville

Mechanical Engineering

In response to the demands of the 2025 C-UASC (California Unmanned Aerial Systems Competition), our team developed an autonomous drone payload delivery system capable of two distinct delivery modes: a precision-controlled descent and a high-speed aerial drop. Designed for modular integration with UAV platforms, the system prioritizes reliability, accuracy, and simplicity under desert environmental conditions. Our solution features a custom winch mechanism with a programmable stepper motor, a passive mechanical hook for tension-based release, and a servo-actuated trapdoor for high-altitude drops. The design was extensively tested for structural integrity, motor torque requirements, drop precision, and electronics reliability—culminating in a robust …

Llnl Raft Flash Pole Redesign, Jack Stangel, Evan Wolfson, Jake Borden, Alexander Meeter

Mechanical Engineering

During research exercises in the ocean, Lawrence Livermore deploys a fleet of rafts outfitted with flash modules affixed to tall poles (in tandem called flash poles) that flash while a photo is taken to act as datums for data collection. The current flash pole design that the LIDSS (Lawrence Livermore Independent Diagnostic Scoring System) team uses is too short to be visible in high seas, not mechanically suited to be made taller, too susceptible to the elements and blunt impact and too difficult to service. We aim to solve these issues.

Torsional Vibration Kit Simulator (Tks), Joseph Thachet, Luca Lawson, Ryan Ota, Otis Mcloughlin

Mechanical Engineering

The goal of this project was to create torsional vibration on a shaft while limiting axial and radial vibration. To do this an eddy current brake was used to slow down a rotating shaft. The electromagnets used to create the eddy currents are able to be turned on and off at a frequency produced by a function generator. This power cycling of the electromagnets creates an alternating braking force thereby inducing torsional vibration while limiting the other two vibration types

Uv Vessel Hoist Scope Of Work, Quinn J. Horak, Harvey Perkins, Andrew A. Osborn, Mikayla H. Nieman

Mechanical Engineering

The San Luis Obispo Wastewater Treatment Plant uses ultraviolet (UV) tubes to purify water. These tubes are cleaned by an internal wiping mechanism that must be removed for servicing and replacing damaged tubes. Currently, this is accomplished by using an engine hoist, but this method requires a large amount of effort and is not safe. Technicians have requested a new method of lifting wiper mechanisms that is safer, faster, and easier to use than their current method.

To solve this problem, we have developed a design that consists of a custom gantry crane with a hoist on a trolley. The …

Trailer Transport System For Multi-Ton Bins, Joanna Lizbeth Bendy, Kevin Matthew Creel, Annelise Vaara Cuneo, Hugo Alonso Valdez

Mechanical Engineering

This project aimed to improve the process of transporting 10,000-pound industrial waste bins. The current method for relocating these bins poses safety risks and requires significant manual effort. This project presents a conceptual solution that enables a single operator to efficiently and safely move roll-off bins using a custom-designed trailer system. The design incorporates three main subsystems: a trailer frame, an integrated winch system, and an off-the-market puller device to guide and secure the bin during transport. Two scaled proof-of-concept prototypes were fabricated to evaluate key aspects of the system's functionality. Testing and analysis suggested that the system is viable …

Brush Seal Cycling Test Rig, Angelo J. Reis, Neil M. Bedagkar, Max A. Soury, Eoin K. Lenham

Mechanical Engineering

To prevent backflow from the high pressure compressor stages of their gas turbines to lower pressure regions, Solar Turbines utilizes brush seals along their driveshafts. Due to manufacturing limitations, no shaft is perfectly symmetric about its rotating axis, leading to orbiting that creates asymmetric friction on the shaft through rubbing. With this biased application of friction comes a hotspot on one side of the shaft, causing bowing of the shaft and cascading into an amplified vibrational response. Our goal is to gather data on this phenomenon and offer a potential solution.

Poly Mars Mini-Rover, Dane Carroll, Aaron Lubinsky, Henry Bouma, Gerardo Tapia-Onate, Scott Frizzel

Mechanical Engineering

The Cal Poly Mars Rover project is creating a fleet of near-identical rovers operating collaboratively to research the surface of Mars. Over the last six years, teams at Cal Poly have been developing vehicles to be launched upon the commercialization of interplanetary travel. Two of these vehicles are to take the roles of ‘Scout’ and ‘Relay’ with the most significant difference being their respective ‘arms.’ The ‘Scout’ will have a robotic arm that interacts with objects on the surface while the ‘Relay’ will have a fixed arm, equipped with a StarLink antenna to communicate with orbiting satellites as seen in …

Air To Water Capture In Support Of Un Sustainable Development Goals, Jordan Macconnell, Michael Tiscareño, Ari Dennis, Baxter Mercy

Mechanical Engineering

This senior project explored the use of thermoelectric cooling for atmospheric water capture. The system was designed to cool aluminum condensing surfaces below the dew point using Peltier modules, with forced convection heat sinks on the hot side. The purpose of this system was to gather reliable amounts of water for various water-scarce areas around the world to help meet the UN's sixth Sustainable Development Goal.

The final design of this project consisted of a 1.5 x 1.5 x 2 foot frame made of acrylic panels and insulation. Within the frame, the thermoelectric system was constructed using Peltier modules with …

One-Handed Wheelchair, Brian Azevedo, Cade Veljovich, Carlos Perez, Jakob Zuckermandel, Alexander Harper

Mechanical Engineering

A person who uses a wheelchair for mobility needs a way to operate it with only one hand. This may be necessary if they lack functionality in one hand or prefer to use only one hand while operating the wheelchair. Even for users with two available hands, it is difficult to operate As of now, such wheelchairs are not widely available or easily accessible, yet these devices are crucial for improving the quality of life and mobility of many people. The goal of this project is to design a more viable and ergonomic solution for people who operate a wheelchair …

Micro Mobile Home R3, Roha Y. Ali, Yuka M. Iwashita, Luke C. Douglas, Joshua Q. Le

Mechanical Engineering

Homelessness is an ever-growing issue all around the world. In 2023, over 250,000 or ~40% of all people experiencing homelessness did not have access to shelter spaces in the U.S. [1]. All people have the right to a place where they are safe from violence, crime, and the constant fear that they will be forced out.

Both homeless people and outdoor enthusiasts need a new way to keep themselves and their belongings safe when living outdoors, since existing products do not offer adequate security, portability, or versatility.

2024-2025 Cal Poly Fluid Power Vehicle Competition Team, Jaskaran Singh Hothi, Justin Menzie Lesko, Tristan Kai Crawford, Lucas Rupert Erickson, Diego Velazquez

Mechanical Engineering

The Fluid Power Vehicle Challenge (FPVC) provides an avenue for the exploration of fluid-powered transportation, adhering to regulations set by the National Fluid Power Association (NFPA). This document serves as a roadmap for our team’s research, design, and manufacturing of a vehicle for participation in the FPVC. The team’s journey began with extensive background research, encompassing stakeholder engagement, analysis of existing solutions, and education on fluid power fundamentals. From this information, we decided to focus on enhancing mechatronics systems, improving the transmission, optimizing the mounting, adding a pneumatic element, and improving the efficiency of the hydraulic system of the vehicle …

Large Backflow Check Valve Life Cycle Test Stand, Colin Bentley, Christopher Carloni, Ethan Gray, Luke Romanini

Mechanical Engineering

Backflow preventers are plumbing devices containing internal check valves used to prevent cross-contamination between downstream contaminants and potable water supply. Zurn Wilkins needs a life cycle test stand to mechanically force open check valves submerged in contaminated water and verify check performance. The stand needs to be modular to work with a range of check types and sizes.

Zurn Wilkins is the primary stakeholder for this project. Secondary stakeholders include commercial and residential building owners, contractors, and water utility companies, who rely on their products for safe and efficient water management. The team for this project consists of four Cal …

Hydropower Collegiate Competition, Aiden D. Foster, Devon Bountry, Joanna Vo, Timothy Rinker, Amanda Rodriguez, Minh Nguyen, Eli Haushalter, Sophie Watkinson, Maiya Holton, Breanne Evans

Mechanical Engineering

The Cal Poly SLO HCC team presents a feasibility study and engineering design review package for retrofitting the non-powered Ritschard Dam in Colorado into a hydroelectric facility as part of the 2025 Hydropower Collegiate Competition. Through a rigorous and multi-staged assessment of plausible dam sites in the western US, the team has chosen the Ritschard Dam in Colorado to implement an electromechanical component designed to accommodate a large range of flowrates stemming from a large variance in upper reservoir capacity due to geographical and climate effects. The team evaluated non-powered dams based on technical feasibility, electric grid proximity, power generation …

Automation Of Post Fermentation Must Removal, Grace Hurley, Jakob Spink, Ariel Metscher

Industrial and Manufacturing Engineering

The Harvest Haulers project addresses a critical operational inefficiency at Saucelito Canyon Winery, where post-fermentation must removal from wine barrels was labor-intensive and potentially hazardous. This project aimed to develop a custom forklift attachment that could securely handle Bordeaux and Burgundy barrels, streamline the dumping process, and improve worker safety.

The resulting solution is a forklift-compatible fixture designed to lift, secure, and tilt barrels using a robust combination of a modified aluminum pallet, padded hoop, ratchet straps, and a custom hinge mechanism. The design meets all engineering requirements, including a 600 lb. load capacity, 135° tilt, and a single-operator setup …

Thermal Modeling Techniques For Additively Manufactured Porous Metals, Lucas D. Rambo

Master's Theses

Advances in additive manufacturing have enabled the creation of metallic components with tailored porosity, offering design flexibility for thermal, structural, and fluid transport applications. This thesis investigates the effective thermal conductivity (ETC) of porous Inconel 625 (IN625) and Inconel-ceramic composites (IN625-RAM2) fabricated by Laser Powder Bed Fusion (LPBF) using Elementum 3D’s PermiAM technology. Experimental measurements of thermal conductivity using the laser flash method are compared to numerical models built from micro-computed tomography data. Simulations were performed using both finite element (FE) and finite volume (FV) methods to evaluate thermal transport in real microstructures. The study investigates the effects of micro- …

Multimodal Self-Folding Of Shape Memory Polymer Using Laser Induced Graphene, Liam Harrison Drew

Master's Theses

Shape memory polymers (SMPs) can undergo programmed shape transformations when heated above their glass transition temperature (T_g), enabling actuation through stimuli such as infrared (IR) radiation and Joule heating. These materials are promising for deployable systems and soft robotics due to their lightweight structure and elimination of traditional mechanical components. While IR-based actuation is simple and low-cost, it lacks precision in uncontrolled environments. Joule heating offers improved control but is often limited by conductive ink properties such as thickness, stiffness, or poor adhesion. This work introduces a novel method for multimodal SMP actuation using laser-induced graphene (LIG) transferred …

Hands-Free Balance Protocol And Development Of An Iphone App For Self-Assessment, Jacob Matties

Master's Theses

For many clinical populations, the measurement of balance is a critical task. Previous studies have agreed that smartphone IMUs provide a valid measure of balance that can be significantly correlated with force plate measurements and is sensitive enough to distinguish between various balance poses, but many balance assessment protocols require uncommon equipment or the use of hands during assessment. These limit accessibility of balance assessment. To eliminate the need for hands or any additional equipment, this study assessed the use of a smartphone recording the root mean square of 3D acceleration magnitude. The goal of the study was to determine …

Mae Enewsbrief Jan-Mar 2025, Department Of Mechanical And Aerospace Engineering, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Mae Enewsbrief Oct-Dec 2024, Department Of Mechanical And Aerospace Engineering, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Comparative Study Of Experimental And Fea Strain Data For Cnt-Coated Fiberglass Sensors, Extensometers, And Metal Foil Strain Gauges, Omar Dwidar

Master's Theses

Material testing is essential across industries such as aerospace, automotive, and construction, playing a critical role in verifying material selection, diagnosing failures, and understanding the development of flaws in structures. These insights are key to designing successful, reliable systems. Conventional metal foil strain gauges are low cost and reliable but provide limited sensitivity with a typical gauge factor around 2. Extensometers provide highly sensitive strain measurements with the disadvantage of a bulky form factor. With advanced materials such as carbon nanotubes, it is possible to manufacture a sensor with the sensitivity closer to that of an extensometer with the small …

Scitechatorium, Olivia Lafferty, Yvonne Brien Miller, Colton Swinth, Savannah Pinheiro, Gage Heinze

Mechanical Engineering

Bellevue Santa-Fe Charter School (Bellevue) is a K6th grade public charter elementary school in Avila Beach, California. The primary focus at Bellevue is fostering unique learning experiences, empowering students through project-based learning, and engaging students in creative endeavors. Following these themes, the school has allocated space and funding for an on-campus science and technology museum known as the SciTechatorium. The museum is currently open during students’ lunch period, providing interactive displays on concepts in human biology, nature and wildlife, physics, and electronics. Bellevue’s K-6th grade science teacher, Christian Strauli, and Bellevue parent volunteers are primarily responsible for the museum’s upkeep …

Adaptive Riding Mount Block, Lucas R. Reynolds, Lukas M. Moreau, Patrick J. Michael, Jandre D. Lafradez

Mechanical Engineering

Professor Sarah Stewart from the Animal Science Department at Cal Poly seeks to develop a solution to help people with disabilities mount horses. Users need a mounting block that can bring them closer to the horse’s back to ease mounting. The current system, consisting of two plastic two-step blocks, is inadequate—unstable, too small, and inaccessible for wheelchair users.

The required solution must meet several key specifications: it should accommodate at least three people standing side by side, be sturdy enough to support their combined weight, and remain stable on rugged terrain like gravel or sand without tilting or sinking. Additionally, …

Hi-Trac Camera Jig, Gabriel Frank Junge, Josh Sherreitt, Jake Weiser, Luke Silver

Mechanical Engineering

Uranium fuel assemblies are stored upright in an underwater container inside the spent nuclear energy fuel pool at Diablo Canyon. The engineers and in-service-inspection team all work together to safely locate this container inside the pool on pins so it is guaranteed safe before they begin loading it with spent uranium fuel rods. The Operators currently employ the use of a zip-tied camera jig that is lowered into the pool along with the tank (called a HI-TRAC) to ensure it is oriented correctly in the pool. This camera jig is in desperate need of re-vamping and re-designing to optimize efficiency …

Fused-Silica Microelectromechanical Systems For Relative Gravimetry, Ethan Doerstling

Theses and Dissertations

Gravimeters are devices that measure gravitational acceleration which can be used by the United States Air Force (USAF) in the areas of navigation and remote sensing. Fused-silica microelectromechanical systems (MEMS) devices offer capabilities to make inexpensive relative gravimeters with higher thermal stability than common silicon devices while maintaining good gravitational sensitivity. The fused-silica devices in this research were designed, simulated, fabricated, and tested to observe their performance as gravimeters. The devices exhibit properties of highly sensitive accelerometers but the current designs do not qualify as gravimeters. This study provides information to improve the sensitivity and stability of these fused-silica MEMS …

From Strategy To Setback?: How A New Teaching Method Affected Exam Outcomes In An Engineering Course, Eleazar Marquez, Samuel Garcia Jr.

Mechanical Engineering Faculty Publications

Research indicates that student learning, engagement, and success in engineering education is highly attributed to the classroom environment and incorporating visual supplements to enhance the physical understanding of fundamental concepts. Despite the implementation and success of numerous pedagogical strategies in these domains, many universities across the country continue to struggle with retention rates, both at the institutional level and the college of engineering. To address such academic challenges and promote student success in engineering education, the authors in this study attempted an alternative pedagogical scheme in a Rigid Body Dynamics course taught at a Hispanic-serving institution (HIS) in the 2023 …

Design Principles For Robotic-Controlled 3d Printing Of Soft Tissue-Mimicking Materials, Karina Mealey

Master's Theses

Geometrically and physically accurate 3D models are emerging as essential tools for surgeons in pre-operative planning and training, but current methods of producing these models are not sufficient. Existing solutions have downsides such as high costs, long and tedious production times, high complexity resulting in a lack of scalability, or an inability to meet material requirements for accurately simulating human tissue.

The objective of this work is to develop principles for a low-cost, easy-to-use 3D printing system capable of prototyping with soft tissue-mimicking materials. To pursue this goal, a MyCobot280 robot arm was used as the mechanism to explore the …

Gamified Gait Rehabilitation Via Real-Time Biofeedback And Adaptive Hip-Exoskeleton Control, Mariya Huzaifa Tohfafarosh

Theses

Gait impairments arise from systemic diseases, age-related degeneration, musculoskeletal dysfunctions, or neurological conditions. While traditional rehabilitation can be effective, they often face challenges such as high costs, inaccessibility, and low patient engagement. To address these challenges, my work introduces a virtual reality-based rehabilitation (VRBR) system, integrating real-time motion and electromyographic (EMG) muscle activation feedback with a gamified virtual environment for enhanced adaptability and engagement. The system includes a custom-designed hip-exoskeleton that provides adaptive spring-like assistance or resistance, supporting both mobility-impaired users and strength training. Assistance levels can be tuned to match the user's progress. Additionally, a custom pressure insole was …

Axiomatic Aggregation Data, Carl D. Sorensen, Christopher A. Mattson, Michael L. Anderson, Thomas J. Ashworth

ScholarsArchive Data

This data set includes the ideation results of an experiment in ideation effectiveness, along with tools for analyzing the quality of the ideation.

All ideas generated by 15 teams of BYU students are included in the database. The ideas have been placed into an OPED genealogy tree format. The quality of all the ideas has been evaluated. The novelty of one team's ideas has been evaluated.

Instructions for performing the OPED organization, evaluating quality, and evaluating novelty are included in the data workbook.

Software tools to aggregate the individual evaluations into team scores and to display the results of the …