Digital Commons Network^™

Development Of A Homogenized Material Model For Carbon Fiber–Aluminum Transition Joints Using Fea And Optimization, Nicholas M. Couch

All Theses

The integration of metals and composites in automotive structures improves manufacturability and overall structural performance. The proposed Ultrasonic Additive Manufacturing (UAM) joint provides a promising solution for joining aluminum and carbon fiber; however, modeling its behavior across an entire vehicle can be computationally expensive. To address this challenge, a homogenized material card is developed to efficiently capture the joint’s mechanical response while maintaining computational efficiency. A novel characterization method is implemented, employing implicit simulations and optimization techniques to determine the effective material properties of the UAM transition joint. This approach enables rapid iteration of material parameters, facilitating the efficient evaluation …

Advancing Multi-Physics Modeling For Microwave Heating: Application In Micro-Reactor Design And Optimization, Raghav Adhikari

All Theses

Microreactors are a type of small-scale chemical reactors for achieving reduced volume, improved product selectivity and higher reaction rate. It allows precise temperature control, which is crucial for sensitive chemical processes. Microreactors can be employed as key components of conducting small-scale reactions with improved reactor configuration and process efficiency. It is important to identify a localized and precise heating mechanism to trigger and control the corresponding chemical reactions.

In fact, microwave heating has gathered significant attention in recent years due to its ability to deliver efficient, rapid, and localized heating, which can accelerate reaction rates and enhances the reaction selectivity. …

The Advancement Of Automation In Beef Packaging Pack-Off Systems, Matthew Newman

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Marble Technologies has developed a new system for beef, pork, and lamb producers that improves quality and worker experience in the packing of products. This work explores the augmentation of this system with the introduction of robotic packing to further reduce labor, increasing worker availability for value-added tasks.

Experimentation conducted to date has explored handling delicate meat products in the standard Marble system and the proposed robotic systems. These mechanical subsystems are critical intermediaries in safely and reliably delivering products to robots and from robots to boxes. Two case studies are presented to walk through the process and challenges of …

Experimental Evaluation And Comparison Of Football-Related Head Impacts Among Ovine, Human, And Hybrid Iii Headforms, Madysn D. Cardinal

All Dissertations

Concussions and traumatic brain injury (TBI) remains a significant public health concern, especially in American football, where repeated head impacts pose long-term risks to athlete health. While current helmet testing standards rely heavily on the Hybrid III surrogate headform to evaluate protective performance, these surrogate models lack anatomical accuracy and exclude the presence of a brain component, limiting their ability to capture the true mechanics of concussion. To address this limitation, this research developed and validated a novel inverted impact testing method that allows the impact testing of a Hybrid III headform and a cadaveric specimen. Additionally, this fixture preserves …

Exploring Methods For Quantifying Uncertainty In Neural Network-Based Turbulence Closures, Cody Grogan

All Graduate Theses and Dissertations, Fall 2023 to Present

Machine Learning (ML) is a very promising field for data-driven modeling of different phenomena. In the field of Computational Fluid Dynamics (CFD), ML is an enticing alternative to traditional methods to improve the accuracy and computational efficiency of simulations. However, many ML models, like Neural Networks, don’t quantify their uncertainty or indicate their confidence in a prediction to those who wish to use them. This is especially important because the use of inaccurate ML predictions in a CFD simulation can greatly impact the validity of a simulation. However, with uncertainty quantification, an ML model can indicate to a modeler the …

Enhanced Point Cloud Generation From A Novel 360° Underwater Lidar, Olagoke E. Daramola

Dissertations

This dissertation presents novel algorithms to improve the mapping capabilities of a 360-degree underwater Pulsed Laser Line Scanner LiDAR (PLLS-360°). Due to its 360° field-of-view (FOV), the PLLS-360° is a compact full-waveform omnidirectional imager suitable for seafloor mapping, underwater asset inspection, object detection, ice-sheet mapping, and construction progress monitoring. The proposed methodology includes an improved waveform fitting technique for saturated waveform recovery, detection array response correction, radiometric corrections, and fusion of LiDAR and sonar bathymetric datasets. The first part of this dissertation assesses the LiDAR’s performance and describes how the data for this unique 360° FOV architecture is processed. The …

Primary And Parametric Resonances Of Angled Mems And Nems Cantilever Resonators, Benjamin Matthew Huerta

Theses and Dissertations

This work investigates the resonances of electrostatically actuated micro- and nano-electromechanical systems (MEMS/NEMS) uniform cantilever resonators positioned at an angle relative to a ground plate. The resonances considered in this work include primary and parametric resonance. For each resonance, the amplitude-frequency and amplitude-voltage responses are presented. The model is constructed using Euler-Bernoulli beam theory. Results are obtained by construction of a Reduced Order Model considering up to the first five modes of vibration. The Method of Multiple Scales is used when considering only the first mode shape, and the software AUTO 07p is used for higher terms. Two models are …

Towards Improving Computational Modeling Of The Lumbar Spine - Impact Of Material Properties And Laminotomy On Spinal Biomechanics, Isaac K. Kumi

Mechanical & Aerospace Engineering Theses & Dissertations

Spinal ligaments play a crucial role in maintaining the mechanical stability of the lumbar spine. These dense, collagenous tissues not only resist excessive motion but also distribute loads between spinal components to protect neural structures. Traditionally, the mechanical response of ligaments has been modeled using linear elastic assumptions, which treat the tissue as having a constant stiffness regardless of loading history. While this simplifies analysis, it fails to capture the time-dependent behaviors, such as creep, stress relaxation, and hysteresis, that are characteristic of biological tissues.

Viscoelastic modeling may provide a more physiologically accurate representation by incorporating both elastic and viscous …

Inter-Cellular Forces Modulate Cell-Ecm Traction Forces, Zaria Booth

Mechanical & Aerospace Engineering Theses & Dissertations

Epithelial cells are among the most abundant cell types in the human body, making up sheets of epithelial tissues that cover the linings of organs and body cavities. Cellular adhesion and force transmission across epithelial tissues are crucial in maintaining tissue integrity and ensuring proper tissue regeneration. Defects in cellular force transmission have been found in various diseases, including cancer. Force transmission at cell-cell and cell-ECM junctions drive cell survival and development. It has been previously shown that changes in cell-ECM traction directly modulates forces at cell-cell contacts. In this study, we aim to determine the effects of perturbations in …

Digital Twins, Ai, And Cybersecurity In Additive Manufacturing: A Comprehensive Review Of Current Trends And Challenges, Md Sazol Ahmmed, Laraib Khan, Muhammad Arif Mahmood, Frank Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The development of Industry 4.0 has accelerated the adoption of sophisticated technologies, including Digital Twins (DTs), Artificial Intelligence (AI), and cybersecurity, within Additive Manufacturing (AM). Enabling real-time monitoring, process optimization, predictive maintenance, and secure data management can redefine conventional manufacturing paradigms. Although their individual importance is increasing, a consistent understanding of how these technologies interact and collectively improve AM procedures is lacking. Focusing on the integration of digital twins (DTs), modular AI, and cybersecurity in AM, this review presents a comprehensive analysis of over 137 research publications from Scopus, Web of Science, Google Scholar, and ResearchGate. The publications are categorized …

Effect Of Moderate Decrease In Contractility On Epithelial Cell-Cell Contacts Under External Stretch, Saika Sharmin

Mechanical & Aerospace Engineering Theses & Dissertations

Epithelial tissues are characterized by extensive cell–cell contacts and often subject to stretch during normal function. Cell-cell contact adhesion strength maintains mechanical continuity from cell to cell. Mechanical forces exerted by cells via actomyosin contractility are known to strengthen cell-cell adhesions to a certain extent. While it is known that a large decrease in contractility causes cell-cell contact rupture due to weakened adhesions, it is unclear how a moderate reduction in contractility affects cell-cell junction stability. Here, we studied how a moderate inhibition of non-muscle myosin II (NMII) affects the integrity of epithelial cell-cell contacts, especially when subject to the …

Computational Study Of Nonlinear Electrokinetic Phenomena In Shear-Thinning Fluids, Wai Yuen Leung

All Theses

Electrokinetic phenomena have been widely used for fluid pumping and particle manipulation in micro/nanofluidic systems. They refer to the motion of fluids or particles in response to an electric field because of the spontaneous formation of an electric double layer at the fluid-solid interface. Understanding electrokinetic phenomena in micro/nanochannels is critical for a wide range of applications across various engineering fields, such as disease diagnostics, contaminant treatment and cell analysis. To date, numerous studies have been reported on electrokinetic phenomena in Newtonian fluids, where the classical Helmholtz-Smoluchowski theory indicates a linear relationship between fluid electroosmosis/particle electrophoresis and electric field. However, …

The Development And Application Of A Method To Simulate Commotio Cordis Inducing Impacts For The Evaluation Of Football Chest Protective Equipment, Bianca J. Henline

All Theses

As one of the most widely played and watched contact sports in the United States, football presents a significant risk of blunt chest trauma. Thus, effective chest protection is essential to prevent rare but fatal injuries like commotio cordis. Despite this, current test methods for certifying chest protective equipment fail to account for injury metrics relevant to commotio cordis events. Recent literature identifies rib deformation and viscous criterion as critical predictors of commotio cordis, yet these metrics are not adequately addressed in the existing testing standard. Furthermore, this standard exclusively assesses chest gear specific to baseball and lacrosse through projectile …

Modeling And Characterization Of Additively Manufactured Barium Titanate Ceramic, Luz Irene Bugarin

Open Access Theses & Dissertations

This dissertation investigates the influence of geometric design on the mechanical properties of BTO structures fabricated via 3D printing. Using finite element modeling (FEM), we simulate mechanical stress responses across a range of architected designs. Results reveal that specific design strategies can significantly enhance performance by promoting favorable stress distributions. This work highlights the critical role of structural design in optimizing functional ceramics and provides a computational framework for the design of next-generation piezoelectric devices.

Technology-Enabled Foreign Object (Fo) Prevention, Christopher Lee Colaw

Open Access Theses & Dissertations

The aviation industry incurs $14 billion per year in cost due to Foreign Object (FO) damage and the prevention and resolution techniques associated with foreign object debris. While aircraft loss, material scrap and rework contribute to that cost impact, a traditional approach to aircraft design and manufacturing which is based on human performance is also a significant driver. Failure modes and effects analysis of human based aircraft manufacturing reveals that two of the largest risks are associated with unknown potential for FO creation and the inability to recall or objectively provide evidence of FO conformity for cases of inquiry, learning, …

Advancing Real-World Implementation Of The Well Optimized Linear Finder (Wolf) High-Speed Atmospheric Turbulence Compensation Method, Timothy Evan Coon

Theses and Dissertations

This dissertation advances the real-world implementation of the Well Optimized Linear Finder (WOLF) method for high-speed Atmospheric Turbulence Compensation (ATC). Atmospheric turbulence introduces phase aberrations into optical wavefronts and degrades image quality in terrestrial imaging systems. Traditional phase diversity methods are computationally intensive and poorly suited to real-time operation. The WOLF method addresses these limitations through a novel, point-wise formulation of the optical transfer function (OTF) as a structured autocorrelation of the generalized pupil function (GPF). This formulation enables the estimation of phase aberrations at individual spatial coordinates with distributed computational complexity.

The research begins by developing a MATLAB-based simulation …

Material Extrusion 3d Printing Of Metal Alloy: Material, Methods And Application., Sihan Zhang

Electronic Theses and Dissertations

Material extrusion (MEX) additive manufacturing presents a promising pathway for producing metal components with complex geometries while avoiding the safety hazards associated with loose powder handling in conventional metal additive manufacturing processes. This dissertation investigates the development and optimization of MEX processes for aluminum alloys, addressing critical challenges in feedstock formulation, printing parameter optimization, and post-processing strategies. Three distinct approaches were explored to advance the capabilities of aluminum MEX: filament-based processing of 6061 aluminum, paste-based extrusion of 6061 aluminum, and development of a novel aluminum-magnesium-tin alloy system for space manufacturing applications. The filament-based approach successfully demonstrated the production of 6061 …

Analysis Of Thrust Performance And Noise Generation Of Uam Composite Propellers Fabricated Using Composite-Based Additive Manufacturing, Samiul Alam

All Graduate Theses and Dissertations, Fall 2023 to Present

Urban air mobility (UAM) is an emerging transportation concept that uses lightweight, efficient aircraft for transporting goods and passengers and performing other logistical activities. One of the biggest challenges in developing UAM from a structural perspective is manufacturing strong and reliable propellers that are lightweight and durable. Traditional manufacturing methods for composite propellers are expensive, time-consuming, and difficult to scale. This study explores a new approach using Composite-Based Additive Manufacturing (CBAM) to produce high-performance propellers more efficiently. CBAM allows for the fabrication of strong, lightweight composite propellers using short manufacturing lead times. However, one challenge with this technique is that …

3d Printing Of Short Fiber Reinforced Polypropylene: Novel Lattice Architecture And Material Characterization, Mohammad Ghazi Alshneeqat

Theses

This study explores the enhanced compressive behavior of 3D-printed single and double gyroid solid-networks lattices. Where the double gyroids are constructed from two intertwined single gyroid structures. These structures were designed by nTop implicit modeling tool and then fabricated by material extrusion additive manufacturing method at optimized printing parameters, including optimized nozzle temperature and raster angle. The main objective of this study is to reveal the compressive behavior of the novel double gyroid lattice structure and then to tailor its response through variable gyroid heights. Standard polymer tests were performed, considering thermogravimetric analysis, to confirm the thermal stability of the …

Mass Effects On Energy Transfer Paths In Nonlinear Vibrating Systems, Manal Mustafa

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

This dissertation examines the role of mass in nonlinear systems, uncovering its role in enabling passive energy redistribution and robust vibration control in both idealized and real-world structures. Focusing on a strongly nonlinear two-degree-of-freedom system, it investigates how changes in mass ratio influence the dynamics of energy transfer, nonlinear normal modes (NNMs), and dissipation behavior.

A number of significant contributions are introduced in this work beginning with the introduction of the frequency-energy-peaks (FE-pks) plot, a novel tool that visualizes how energy flows through the system, revealing transient resonance orbits, internal resonance effects, and effectively capturing the different nonlinear phenomena with …

Shape Memory Behavior In Medium To High Entropy Shape Memory Alloys: Design, Prediction, And Experimental Analysis, Hatim Raji

Theses and Dissertations

This dissertation provides a data-driven system integrating synthetic data generation and machine learning (ML) techniques to create multicomponent SMA compositions with specific transformation temperatures (TTs). Models were trained to represent the nonlinear dependencies influencing martensitic transformation behavior by using elemental, thermodynamic, and process-related aspects. The capacity of the ML models on medium entropy NiTiHfPd and high entropy NiTiHfZrCu systems accuracy was confirmed by experimental validation showing TTs closely matched with model outputs.

A Digital Engineering Framework For Ai-Driven Trade-Off Evaluation And Predictive Component Classification, Alejandro Silva Au

Open Access Theses & Dissertations

This thesis introduces a digital engineering tool designed to help engineers make smarter decisions when choosing actuators. At its core, the system brings together machine learning (specifically XGBoost) and a decision-making method called Multi-Utility Attribute Theory (MUAT). The goal is to support engineers in picking components based on what really matters for their designs, whether that's speed, cost, durability, or any other performance factor. What makes this tool stand out is its user-friendly interface that lets people interact with the system directly. It takes a set of actuator performance data, classifies each one into a relevant use category, and then …

Human Comfort Modeling, Measurement, And Improvement In Human–Robot Collaboration, Yuchen Yan

All Dissertations

A dissertation is proposed to explore human comfort in human-robot collaboration (HRC) through modeling, prediction, and enhancement methodologies. Human comfort is a crucial yet underexplored factor in HRC, directly influencing task efficiency, trust, and overall collaboration effectiveness. Understanding the influential factors, developing computational models, and refining methods to improve human comfort in HRC are essential steps toward advancing the field of collaborative robotics. To address these challenges, multiple studies have been conducted. A series of experimental studies were performed to investigate how robot motion-based parameters affect human comfort in HRC. These studies examined both analytical comfort modeling approaches and physiological …

Is There A More Effective Design For Quadrat To Increase Ease Of Use And Vegetation Density?, Scott M. Burke Jr., Kristen M Bellisario

Discovery Undergraduate Interdisciplinary Research Internship

Quadrats are a special tool in the ecology field that allows the measurement of vegetation density for further data analysis of a habitat. The larger the quadrat cross-sectional area, the better the results of the data, which in turn can make the quadrat hard to carry through field sites. In wildlife corridor research, quadrat surveys provide a quantitative metric for habitat suitability. In this work, we consider the efficiency and ease-of-use benefits for field work in the design of a collapsible version of a quadrat using a House of Quality (standard metric for new design requirements) to assess the customer …

Dynamic Analysis And Fatigue Life Evaluation Of Single Herringbone Planetary Gear System With Crack Fault, Dongping Sheng, Jie Yang, Chun Su

Journal of Mechanical Engineering Science and Technology (JMEST)

The herringbone planetary gear transmission is widely used due to its exquisite compact structure, excellent load-bearing capacity, and stable transmission characteristics. However, root crack is one of the most common failure modes of gears. A cracked herringbone planetary gear system is taken as research object. The sun gear with crack fault is studied from the aspect of modal and transient dynamic analysis, and the related results are compared with the healthy gear. Based on the transient dynamic analysis of the herringbone teeth with cracks, a fatigue life evaluation is conducted. Firstly, the results show that no significant difference between the …

Investigation Of The Influence Of Warhead Shape And Type Of Missile Weapon Material Counter-Training Tank Weapons Simulation Approach, Transisma Budiarta, Haris Puspito Buwono, Radhi Nurvian Amrullah

Journal of Mechanical Engineering Science and Technology (JMEST)

This study analyzes the effect of warhead shape and material variations on pressure, temperature, and lift on training missiles using CAD-based simulation methods. The variations of warhead shapes tested include flat, flat radius, and tapered, while the materials used are rubber, ABS, and PE. The simulation results show that the tapered warhead shape with PE material produces the lowest pressure (50.3 MPa) due to more efficient pressure release and low friction properties. Conversely, the Flat shape produces the highest pressure (69.1 MPa) on all materials due to flow stagnation. In terms of temperature, the Flat Radius warhead with PE and …

Characterization Of Curcumin As A Coating Material For Polymer-Free Stents Interms Of Morphology And Release, Ameliyana R.S.P.A. Yani, Muhammad Kusumawan Herliansyah

Journal of Mechanical Engineering Science and Technology (JMEST)

The use of bare metal stents over the long term often leads to the re-narrowing of blood vessels, prompting a shift to drug-eluting stents (DES). However, the use of polymers in DES has been known to trigger inflammation and thrombosis in the arteries. As an alternative, polymer-free drug-eluting stents (PF-DES) have emerged as a safer option. In this study, curcumin was selected as the primary coating material for PFDES using the electrophoretic deposition method. The effects of varying curcumin concentrations (125 µg/ml, 250 µg/ml, and 500 µg/ml) were examined to understand their impact on deposition morphology, coating weight, chemical bonding …

Toolpath Motion Strategy And Feed Rate In Cnc Milling On Energy Consumption Of Machining Process, Luqman Dwi Saputra, Eko Yudiyanto

Journal of Mechanical Engineering Science and Technology (JMEST)

The use of CNC milling machines to produce components, especially aluminum brackets used for automotive, is one of the advances in the industrial field. The use of CNC milling machines has the advantage of producing processes with speed accuracy, and better workpiece quality than conventional machines. This research investigates energy consumption in the CNC milling process by varying the toolpath motion strategies—Zigzag, Constant Overlap Spiral, Parallel Spiral, and Parallel Spiral Clean Corners—as well as feed rates of 700 mm/min, 800 mm/min, 900 mm/min, and 1000 mm/min. The goal is to find out the best parameters for using energy in the …

Boiling Heat Transfer Coefficient And Critical Heat Flux On Conical Cylindrical Copper Under Surface Modification, Muhammad Dimyati Nashrullah, Andi Sanata, Imam Solahuddin, Nasrul Ilminnafik, Indro Pranoto, Adhika Widyaparaga

Journal of Mechanical Engineering Science and Technology (JMEST)

This study examined how surface roughness and nanoceramic coating, influences the boiling heat transfer coefficient (BHTC) and critical heat flux (CHF) of a conical cylindrical copper test specimen. Three test specimens exhibiting surface roughness of 0.22 µm, 0.14 µm, and 0.04 µm were analyzed for comparison. Two additional test specimens were treated with nanoceramic coatings utilizing silicon carbide as the base material: one specimen received a single-layer coating and the second was applied with a double-layer coating. The behavior of the bubbles was closely observed with a high-speed camera to deepen the analysis. The experimental results showed that the test …

Development Of Adjustable Static Test Equipment For Below-Knee Prosthetic Feet: A Case Study, Firmansyah Hafizh Rizal Nurrokhim, Fauzan Raka Mawandi, Puspa Dinda Safitri, Imam Mahmudah, Dwiky Mirnanda, Ndaru Adyono, Wahyu Dwi Lestari

Journal of Mechanical Engineering Science and Technology (JMEST)

The high prevalence of physical disabilities in Indonesia, particularly among the productive-age population, highlights the urgent need for advancements in prosthetic technology. While local fabricators have begun producing prosthetic feet, the lack of standardized testing procedures compromises safety and performance. This study addresses that gap by developing an adjustable static testing device tailored for below-knee prosthetic feet, focusing on keel and heel tests to evaluate mechanical performance. The device includes a jig-fixture platform adjustable to 8° and 15° for heel and keel tests, respectively. It applies a 1230 N load based on AOPA standards and integrates load and displacement sensors …