Digital Commons Network^™

Cfd Simulations Of Critical Components In Fuel Filling Systems, R. Banerjee, X. Bai, D. Pugh, Kakkattukuzhy M. Isaac, D. Klein, J. Edson, W. Breig, L. Oliver

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A comprehensive study is reported on the dynamics of critical components in the refueling process for passenger cars and light trucks. Nozzle, filler pipe, recirculation tube, tank, and canister are investigated. CFD simulations are conducted for flow rates of 4 liters/min (lpm) to 80 lpm for gasoline and up to 120 lpm for diesel fuel. Tank pressure, identified as a critical parameter controlling flow performance, is measured and utilized as a boundary condition. Flow simulation in a carbon canister, accomplished by treating the adsorbing carbon as a porous medium, indicates pressure drops which are in good agreement with published experimental …

Effect Of Polymer-Surface Mobility On Adhesion In Poly(Methyl Methacrylate)-Tape System, Bhavesh C. Gandhi, Frank D. Blum, Lokeswarappa R. Dharani

Chemistry Faculty Research & Creative Works

The interaction between two polymer layers, especially adhesion between them, plays an important role in polymer processing and other applications. Detailed knowledge of the molecular structure and dynamics of polymer interfaces, and how they relate to macroscopic mechanical properties, should help designers construct more functional systems. Unfortunately, there have been few studies where both molecular and macroscopic studies have been performed on similar systems. In previous studies from our group, we have probed the dynamics of poly(methyl acrylate) (PMA) and thermal behavior of poly(methyl methacrylate) (PMMA) on silica. These studies helped us paint a picture for strongly bound molecules on …

Spectral Integration Of Microstructure And Design, Brent L. Adams, B. Henrie, M. Lyon, H. Garmestani, Surya R. Kalidindi

Faculty Publications

Support of the Army Research Office is greatly appreciated. Mechanical design can be conducted in a framework where consideration of microstructure as a continuous design variable is facilitated by the use of a Fourier space. Selection of the mechanical framework for the problem (e.g., mechanical constitutive model and homogenization relations) dictates the dimensionality of the pertinent microstructure representation. Microstructure is comprised of basic elements that belong to the local state space. Local state includes crystallographic phase and orientation, and other parameters such as composition. The local state space is transformed into an isomorphic set in Fourier space. The universe of …

Buckling Analysis Of Grid Stiffened Composite Structures, Samuel Kidane

LSU Master's Theses

Buckling of a stiffened composite cylinder is a very complex phenomenon that involves complex interactions between the skin and the stiffeners. Depending on different configurations of the skin and stiffener, different buckling failure modes and failure loads are observed in stiffened cylinders. In this work failure modes and buckling loads of stiffened composite cylinders under uniaxial loading condition is investigated by using analytical and experimental approaches. In the first Chapter an improved smeared method is developed to model the buckling problem of an isogird stiffened composite cylinder. In this model the stiffness contributions of the stiffeners is computed by analyzing …

Comparison Of Numerical And Experimental Results Of Four Liquid Spray Combustors, Dong Hu

LSU Master's Theses

Validation of CFD predictions for liquid spray combustion application is a challenging task due to difficulties in both modeling and experimental measurements. Validation is considered to be a key step for successful CFD predictions of combustion systems. The goals of this thesis are threefold: (1) validation of models used for spray combustion predictions, (2) using the validated predictions to explain steady flow and combustion physics, and (3) using the validated procedure to simulate conditions where unstable combustion behavior is observed experimentally, and to explore if such unstable behavior can be predicted correctly. The model validation is done with respect to …

Parametric And Sensitivity Analysis Of A Vibratory Automobile Model, Kanika Nicole Vessel

LSU Master's Theses

Vibration response is an important aspect of any engineering problem. This thesis deals with developing a method to obtain the vibration, parametric and sensitivity of an automobile analyzed as a 2-DOF rigid body system with damping. The focus of the vibration analysis is to obtain the poles, eigenvectors, and natural frequencies of the system. The parametric analysis gave information on how the natural frequency is affected when one of the parameters is perturbed. Information about how much the system is affected by the change in one parameter is what is obtained from the sensitivity analysis. The theoretical solution contained in …

Hybrid Transient-Parametric Method And System To Distinguish And Analyze Sources Of Acoustic Emission For Nondestructive Inspection And Structural, Health Monitoring, Yuris Dzenis

Department of Mechanical and Materials Engineering: Faculty Publications

A nondestructive evaluation (NDE) technique for inspecting or health monitoring of Structures and/or Specimens by analyzing acoustic emission (AE) signals emitted by the Structures and/or specimens. The method and System ana lyzes acoustic emission (AE) signals emitted by structures and/or Specimens. AE Signals emitted by the Structures and/or Specimens are parametrically filtered as a function of parametric filters corresponding to characteristic waveforms of transient AE classes of predefined AE signals. In para metric analysis, the filtering may be pre- or post-recording. In transient AE analysis, the filtering may be prior to transient recording of the transient signals.

A Theory Of Volumetric Growth For Compressible Elastic Biological Materials, Stephen M. Klisch, Timothy J. Van Dyke, Anne Hoger

Mechanical Engineering

A general theory of volumetric growth for compressible elastic materials is presented. The authors derive a complete set of governing equations in the present configuration for an elastic material undergoing a continuous growth process. In particular, they obtain two constitutive restrictions from a work-energy principle. First, the authors show that a growing elastic material behaves as a Green-elastic material. Second, they obtain an expression that relates the stress power due to growth to the rate of energy change due to growth. Then, the governing equations for a small increment of growth are derived from the more general theory. The equations …

A Study Of Muscle Activation In A Mathematical Model Of The Human Head And Neck, Janet Brelin-Fornari, A. Arabyan

Mechanical Engineering Presentations And Conference Materials

A model of the human head and neck that incorporates active and passive muscles is utilized in the analysis of non-impact loading in high “g” environments. The active muscles have the capability to be activated partially and in different combinations.The model is implemented in MADYMO using lumped parameters and Hill muscles. A comparison of simulation results with experimental data, generated by the Naval Biodynamics Laboratory (NBDL) for neck flexion and rebound, shows excellent agreement for a 15g impulsive load.

Ortho-Planar Linear-Motion Springs, John J. Parise, Larry L. Howell, Spencer P. Magleby

Faculty Publications

This paper presents an ortho-planar spring design that operates by raising or lowering its platform relative to the base with no rotation. The compact nature of the design, and its non-rotating motion, eliminates the problem of rotation against adjoining surfaces and is less sensitive to variation in assemblies than many current compact springs. Nomenclature is presented to identify different configurations, mathematical equations are provided that accurately model the force-defection relationships, and a pneumatic valve positioner application is demonstrated.

An Analysis Of Greenhouse Cookpot Design Considerations For Low-Cost Solar Cookers, Florida Solar Energy Center, Philip W. Fairey

FSEC Energy Research Center®

This analysis is prepared as part of a research project on low-cost solar cookers conducted by the Florida Solar Energy Center for the Dorothy Ann Foundation on behalf of Solar Household Energy, Inc. The overall purpose of the research project is to improve the performance, reliability and cost-effectiveness of low-cost solar cookers for use in developing nations. The analysis reported here concentrates solely on the cookpot and "greenhouse" design considerations for such systems.

Investigation Of Dual-Mode Combustion With Large Upstream Interaction, Melanic Olynciw-Mills

Mechanical & Aerospace Engineering Theses & Dissertations

Dual-mode scramjet combustor configuration with significant upstream interaction is investigated numerically. The possibility of scaling the domain to accelerate the convergence an3 reduce the computational time is explored. The supersonic combustor configuration was selected to provide an understanding of key features of upstream interaction and to identify physical and numerical issues relating to modeling of dual-mode configurations. The numerical analysis was performed with vitiated air at freestream Mach number of 2.5 using hydrogen as the sonic injectant. Results are presented for two-dimensional models and a three-dimensional jet-to-jet symmetric geometry. Comparisons are made with experimental results. Two-dimensional and three-dimensional results show …

Determination Of Life Cycle Cost Under Uncertainty, Hamoud R. Al-Otaibi

Mechanical & Aerospace Engineering Theses & Dissertations

The subject of this thesis is a Life Cycle Cost (LCC) model that takes into consideration the uncertainty of equipment failure rate and input data. The outcome of LCC depends on numerous estimates, forecasts, assumptions, and approximations of real-life data. Each of these factors has the potential to introduce error into the results. The study focuses upon the database generated for equipment failure rates data developed from historical database based on Weibull distribution parameters. The model provides a method to simulate real-world project life cycle.

A Nonlinear Motion Cueing Algorithm With A Human Perception Model, Robert J. Telban

Link Foundation Modeling, Simulation and Training Fellowship Reports

The objective of a motion system, when used in conjunction with a visual system, is to stimulate the pilot so that he can perceive the required motion cues necessary to fly the simulator within the same performance and control activity as the aircraft. An example of a motion system is the six-degree-of-freedom hexapod shown in Figure E.l. Platform motion allows the pilot to react more quickly to simulated aircraft motion as compared to visual stimuli alone, thus enabling him to co1Tect (and reduce the magnitude) of any deviation sooner than having to wait for the information visually. Without motion cues …

Buckling Of Composite Conical Shells Under Combined Axial Compression, External Pressure, And Bending, Youngjin Chung

Dissertations

Conical shells are extensively used in space crafts, robots, shelters, domes, tanks, and in machinery or devices (e.g. as Belleville washers). Thus, the design of minimum weight, maximum strength, stiffened conical (and cylindrical) shells under combined loads has long been of interest to designers. The objective of this study is to improve the strength of conical shells and reduce the weight of the structure. Buckling of composite conical shells subjected to combined axial loading, external pressure, and bending is investigated using energy and finite element methods. The conical shells have single and multiple layers, different cone angle, length, and radius. …

Mechanical Design Of The Heater Used In Near Infrared Filter, Jun Ma

Theses

This thesis presents a design and analytical process in the application of the heater used in a near infrared filter working in Big Bear Solar Observatory, CA. The objective of the project is to achieve the physics parameters for the filter, which will be used in the observation of the solar activity.

The most important part of this design is to keep a relatively fixed temperature inside the oven-like heater. The reason is that optical properties of calcite (kind of filter in telescope) are pretty sensitive to a tiny disturbance on inside temperature. This was the biggest issue in this …

Disclination Loop Behavior Near The Nematic-Isotropic Transition, Nikolai V. Priezjev, Robert A. Pelcovits

Mechanical and Materials Engineering Faculty Publications

We investigate the behavior of disclination loops in the vicinity of the first-order nematic-isotropic transition in the Lebwohl-Lasher and related models. We find that two independent measures of the transition temperature, the free energy, and the distribution of disclination line segments, give essentially identical values. We also calculate the distribution function D(p) of disclination loops of perimeter p and fit it to a quasiexponential form. Below the transition, D(p) falls off exponentially, while in the neighborhood of the transition, it decays with a power-law exponent approximately equal to 2.5, consistent with a “blowout” of loops at the transition. In a …

Ascent And Decompression Of Viscous Vesicular Magma In A Volcanic Conduit, Helene Massol, Claude Jaupart, Darrell Pepper

Mechanical Engineering Faculty Research

During eruption, lava domes and flows may become unstable and generate dangerous explosions. Fossil lava-filled eruption conduits and ancient lava flows are often characterized by complex internal variations of gas content. These observations indicate a need for accurate predictions of the distribution of gas content and bubble pressure in an eruption conduit. Bubbly magma behaves as a compressible viscous liquid involving three different pressures: those of the gas and magma phases, and that of the exterior. To solve for these three different pressures, one must account for expansion in all directions and hence for both horizontal and vertical velocity components. …

Skeleton-Based Geometric Reasoning For Adaptive Slicing In A Five-Axis Laser Aided Manufacturing Process System, Kunnayut Eiamsa-Ard, Jun Zhang, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Multi-axis Laser Aided Manufacturing Process (LAMP) is an additive manufacturing process similar to laser cladding. This process can produce full functional parts [1]. Traditional Layered Manufacturing processes produce parts with limited surface quality; and also the build time is often long due to the deposition of sacrificial support structure. The multiple degrees of freedom endow the LAMP system a capability to build parts without support structure. An algorithm for adaptive slicing based on skeleton is presented in this paper. The skeleton is useful for many applications such as feature recognition, robot path planning, shape analysis, and etc [2]. The near …

Empirical Modeling And Vision Based Control For Laser Aided Metal Deposition Process, Mallikharjuna R. Boddu, Srinivas Musti, Robert G. Landers, Sanjeev Agarwal, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper gives a brief description of the laser aided manufacturing process. Empirical models describing the process dynamics of the laser aided metal deposition process is developed based on some of the models found in the literature. These models provide the basis for process planning and real time control. An embedded vision system, a two color temperature sensor, and a laser displacement sensor are incorporated for real time monitoring and control of the deposition process. The temperature profile of the surface and geometric characteristics of the melt pool are studied to ensure consistent operation of the process.

Development Of An Integrated Sensor For The Measurement Of The Acoustic Local Volume Displacement Of Vibrating Beams, Randall Rozema

Masters Theses

Currently, the methods used for sensing the volume displacement of a vibrating structure entail the use of a polyvinylidene fluoride sensor that spans the entire length of the structure. However, this work shows that the surface behavior related to volume displacement can be measured through the use of a polyvinylidene fluoride sensor that spans only the area of interest. In this application it was shown that two-point sensors are required in addition to the distributed, polyvinylidene fluoride sensor to achieve an accurate measurement. As a result, a set of four beams with different end conditions were constructed so that the …

Simulation Of Engineering Systems Described By High-Index Dae And Discontinuous Ode Using Single Step Methods, Marc Compere

Publications

This dissertation presents numerical methods for solving two classes of or-dinary diferential equations (ODE) based on single-step integration meth-ods. The first class of equations addressed describes the mechanical dynamics of constrained multibody systems. These equations are ordinary differential equations (ODE) subject to algebraic constraints. Accordinly they are called differential-algebraic equations (DAE).

Specific contributions made in this area include an explicit transforma-tion between the Hessenberg index-3 form for constrained mechanical systems to a canonical state-space form used in the nonlinear control communities. A hybrid solution method was developed that incorporates both sliding-mode control (SMC) from the controls literature and post-stabilization from …

Predicting The Effects Of Dimensional And Material Property Variations In Micro Compliant Mechanisms, Jonathan W. Wittwer

Theses and Dissertations

Surface micromachining of micro-electro-mechanical systems (MEMS), like all other fabrication processes, has inherent variation that leads to uncertain material and dimensional parameters. To obtain accurate and reliable predictions of mechanism behavior, the effects of these variations need to be analyzed. This thesis expands already existing tolerance and uncertainty analysis methods to apply to micro compliant mechanisms. For simple compliant members, explicit equations can be used in uncertainty analysis. However, for a nonlinear implicit system of equations, the direct linearization method may be used to obtain sensitivities of output parameters to small changes in known variables. This is done by including …

Computer-Aided Engineering For Tool Design In Manufacturing Engineering Curriculum, Daniel J. Waldorf

Industrial and Manufacturing Engineering

At Cal Poly – San Luis Obispo, a variety of tool design issues are covered in a junior-level manufacturing engineering course called Tool Engineering. In the course, designing fixtures – for any process – is a major component of the content. The process of designing a fixture is similar to the method a mechanical engineer would use to design a new product. The course is therefore an excellent opportunity to teach design principles to manufacturing engineers. This project involves an attempt to introduce computer-aided methods, including the finite element method (FEM), for analysis of tool design into the Tool Engineering …

Parametric Study Of Heavy Metal Partitioning In A Pilot Scale Incinerator Burning Simulated Municipal Solid Waste, Sukrut S. Thipse

Dissertations

Incineration is a combustion process used to convert toxic waste to benign gases and residue in presence of excess air. The products of the incineration process are bottom ash, fly ash and the flue gas. Most of the metal-based phases formed in incineration are toxic and their emissions need to be strictly controlled. Therefore, behavior of metal species during incineration must be well understood. Such understanding is possible based on the experimental identification of the metal phases formed in the waste combustion and determination of their concentration in various incineration products.

A pilot-scale incinerator of 140,000 Btu/hr capacity was constructed, …

Force And Effort Analysis Of Unfastening Actions In Disassembly Processes, Manuela Sonnenberg

Dissertations

Fastening is the process of connecting one or more parts together with the aid of fastening elements. Unfastening, the reverse of fastening, is the process of separating components from each other by removing or detaching fastening elements. So far, the unfastening process is not well understood, and the analysis about it is not very extensive.

However, the need for disassembly is currently increasing. First, parts have to be taken apart for service and repair, and secondly, for the recycling process. Therefore, there is a need to consider unfastening during the design process in order to enable efficient disassemblies.

The purpose …

Overview Of Fuzzy Logic, Mohamed Trabia

Mechanical Engineering Faculty Presentations

The presentation includes a brief introduction to fuzzy logic and fuzzy logic controllers. These concepts are illustrated by an example of an autonomous vehicle controller.

Comparison Of Two Distributed Fuzzy Logic Controllers For Flexible-Link Manipulators, Linda Z. Shi, Mohamed Trabia

Mechanical Engineering Faculty Presentations

The paper suggests that fuzzy logic controllers present a computationally efficient and robust alternative to conventional controllers. The paper presents two possible structures for the distributed fuzzy logic controller of a single-link flexible manipulator. A linear quadratic regulator method is used to prove the effectiveness of fuzzy logic controllers.

Design Of Fuzzy Logic Controllers For Optimal Performance, Mohamed Trabia

Mechanical Engineering Faculty Presentations

While fuzzy logic controllers are generally robust, the performance of a system whose behavior is not well understood, or that has a large number of coupled inputs and outputs, may be less than optimal. In this paper, nonlinear programming techniques are used to improve the performance of a fuzzy logic controller for navigating an autonomous vehicle.

Modeling Nonlinear Behavior In A Piezoelectric Actuator, Hanz Richter, Eduardo A. Misawa, D. A. Lucca, H. Lu

Mechanical Engineering Faculty Publications

A piezoelectric tube actuator is employed as a sample positioning device in Nanocut, a cutting instrument conceived to study the mechanics of nanometric cutting. Extension of functionality of the instrument as a nanometric machine tool motivates the search for an accurate model of the actuator for implementing feedback control. A simple nonlinear model describing longitudinal expansion of the piezoelectric tube actuator is presented in this paper. The model derivation is based on a non-formal analogy with nonlinear viscoelastic materials under uniaxial extension, for which the responses to a step input are similar to the piezoelectric tube. Suitability of the …