Digital Commons Network^™

Key Steering Characteristics For Training Remote Operators Of Maritime Autonomous Surface Ships In Collision Avoidance, Soyeong Lee, Ik-Hyun Youn

Journal of Marine Science and Technology–Taiwan

Maritime Autonomous Surface Ships (MASS) require remote operators (ROs) who need to be trained in collision avoidance (CA) maneuvers. In order to develop a training system, this study investigated differences in the steering characteristics of expert and novice navigators such as the timing of the initial rudder operation, rudder angle at a relative bearing 0°, heading at the maximum rate of turn to starboard, and, heading at the closest point of approach. The experts exhibited relatively consistent and controlled steering patterns characterized by earlier rudder adjustments and smoother heading transitions while novices demonstrated delayed reactions and greater variability in heading …

Subsurface Origin Of Tex86 Signals Revealed By Cross-Seasonal Gdgt Distributions In Suspended Particulate And Sediment Samples From The Southern East China Sea, Hung-Lin Tsai, Da-Chen Lin

Journal of Marine Science and Technology–Taiwan

The TetraEther indeX of 86 carbon atoms (TEX₈₆) proxy, which is based on isoprenoid glycerol dialkyl glycerol tetraethers (isoGDGTs) produced by Thaumarchaeota in marine environments, is widely used to reconstruct past sea surface temperatures (SSTs). However, evidence suggests that this proxy often instead reflects subsurface conditions, particularly in dynamic marginal seas. Therefore, we conducted a cross-seasonal study of glycerol dialkyl glycerol tetraether (GDGT) distributions in the southern East China Sea (ECS), which is characterized by strong monsoonal and current-driven hydrographic variability. We analyzed surface sediments and the high-resolution vertical profiles of suspended particulate matter (SPM) collected from 2016 …

The Current Status And Challenges Of Efforts To Generate Blue Carbon Credits In Okinawa Prefecture, Takashi Tamura, Wei-Chung Chen, Takafumi Sasaki

Journal of Marine Science and Technology–Taiwan

In Okinawa Prefecture, the Mozuku aquaculture industry is keen on establishing Blue Carbon Credits. This enthusiasm stems from various perspectives, including climate change mitigation, improvement of fishing grounds, industry maintenance, and enhancement of fishing ground surveillance functions. However, the industry faces several challenges. One significant challenge is the lack of a clear remaining coefficient for Mozuku, which complicates the creation of credits. Additionally, there is a shortage of manpower within the fisheries cooperative, further exacerbating the problem. To address these challenges, it is crucial to secure human resources that can promote system understanding and establish a financial base for undertaking …

In-Situ And Laboratory Sound Velocities Of Unconsolidated Sediments In The Western South Korea Plateau Of The East Sea, Kiju Park, Gil Young Kim, Yuri Kim, Bo Yeon Yi, Nyeon Keon Kang, Gwang Soo Lee

Journal of Marine Science and Technology–Taiwan

The in-situ velocity of unconsolidated shelf sediments in the western South Korea Plateau of the East Sea was directly measured using the Korea Institute of Geoscience and Mineral Resources (KIGAM) Seafloor Acoustic Probe. Physical properties, including laboratory velocity, were also measured for core samples collected from the same location. The laboratory measurements were conducted at a temperature of 23℃ and under atmospheric pressure. Owing to the in-situ temperature and pressure (0.5–1.5℃ and 100–180 atm, respectively) at the sampling site, the laboratory velocity was adjusted to the in-situ conditions. In addition, a comparison with a theoretical prediction model (Biot-Stoll model) was …

Diel Variations In Abundance Of Viral, Picoplankton, And Nanoplankton In Coastal Waters Of Taiwan In Spring, Patrichka Wei-Yi Chen, Madeline Olivia, Vladimir Mukhanov, Ufimtseva Margarita, Liashko Tatiana, Sakhon Evgenii, Supriyadi Supriyadi, Intan Dwi Puspitasari, Arpita Ghosh, An-Yi Tsai

Journal of Marine Science and Technology–Taiwan

The diel variations of viruses (< 0.2 μm), picoplankton (0.2-2 μm; heterotrophic bacteria, Synechococcus spp., and picoeukaryotes), and nanoflagellates (2-20 μm; heterotrophic and pigmented nanoflagellates) were examined for 2 days with approximately 4 h of temporal sampling in the spring of 2024 in coastal surface waters of the subtropical western Pacific. The abundance of bacteria did not follow a consistent diel pattern, and viral abundance was positively correlated with bacterial abundance. Synechococcus spp. was found to grow during the light period and with peak abundance at night, exhibiting a remarkably diel pattern; however, the pattern was opposite in picoeukaryotes. In the size-fractionation experiments, after 32 h of …

New Insights Into Decapod Chemical Communication: A Focus On The Hydrothermal Vent Crab Xenograpsus Testudinatus, Jishnu Panamoly Ayyappan, Mark June S. Consigna, Li-Chun Tseng, Jiang-Shiou Hwang

Journal of Marine Science and Technology–Taiwan

Chemical communication in decapod crustaceans has been extensively studied for over 150 years, with most of the research focusing on sex pheromones. These crustaceans inhabit chemically complex environments and rely on diverse chemical signals for essential behaviors such as mate recognition, predator avoidance, and social interaction. This review synthesizes key findings from studies on shrimp, crayfish, lobsters, and crabs, the most well-documented taxa in crustacean chemical ecology. Various appendages, including the first and second antennae, mouthparts, and walking legs, are involved in chemosensory detection. Special emphasis is placed on chemical communication in extreme environments such as hydrothermal vents (HVs), with …

Apply Cluster Analysis To Improve Interpretation Of Ert Images, Yin-Chun Hung, Yu-Xiang Zhao

Journal of Marine Science and Technology–Taiwan

The completeness and accuracy of collecting and investigating geotechnical and marine engineering geological conditions are key to the success or failure of engineering development. Traditional marine engineering and geotechnical surveys often require the assistance of geophysical methods to fully present the geological conditions. Electrical Resistivity Tomography (ERT) is an advanced geophysical method that produces accurate cross-sections of underground resistivity. Although 2D ERT has been widely used in geotechnical engineering and marine engineering, many uncertainties remain hidden behind the vivid and colorful resistivity profiles. To apply 2D ERT profiles effectively in geotechnical and marine geological surveys and monitoring, it is essential …

Geo-Chemical Fractionations Of Phosphorus In Sediments Of Thuy Trieu Lagoon And Cam Ranh Bay, Vietnam, Phu H. Le, Ngoc H. Pham, Dung T. Le, Tuan Linh T. Vo, Binh V. Tran, The V. Ho

Journal of Marine Science and Technology–Taiwan

The geochemical fractions of phosphorus (P) and its bioavailability in sediments of Thuy Trieu Lagoon and Cam Ranh Bay were investigated. Twenty-four surface sediment samples were collected in the dry season (Jun 2024) and the rainy season (Oct 2024). A sequential extraction procedure was applied to identify the phosphorus (P) fractions in sediments, including Exchangeable P (Ex-P), iron-bound P (Fe-P), aluminum-bound P (Al-P), calcium-bound P (Ca-P), and residual P (Res-P). Total P (TP) ranged from 214.9 to 2365.2 µg.g^-1, and the Ca-P fraction was the dominant chemical form in sediments. Based on the results of Pearson correlation and …

Beyond Basic Needs : Exploring The Antecedents And Outcomes Of Seafarers’ Well-Being, Chian Liou, Cheng Kuo Sung, Kimberly Hsiu-Chin Lee, Jiunn Liang Guo

Journal of Marine Science and Technology–Taiwan

Given the importance of seafarers’ mental health and the limited literature on this topic, this study aims to explore the causes and consequences of seafarers’ well-being. A questionnaire survey was conducted, and the data were analyzed using structural equation modeling and hierarchical regression analysis. Consistent with the predictions of the happy and productive worker thesis, this study found that the more satisfied the seafarers are with the shipping company’s seafarer policy, the higher their well-being tends to be, leading to a more positive work attitude. Interestingly, the study found that a company effect is significantly present in this correlation; that …

Empowering Shipping Management Competence With Artificial Intelligence: A Strategic Approach To External Environmental Volatility, Yu-Kai Huang, Cheng-Hsien Hsieh, Chi-Chang Lin, Yu-Tzu Chang, Yu-Chao Cheng

Journal of Marine Science and Technology–Taiwan

The shipping industry is undergoing significant transformation with advancements in artificial intelligence (AI), yet challenges remain in effectively adopting AI technologies. This study addresses the key concerns influencing AI adoption in shipping management. Using the Analytic Hierarchy Process (AHP) integrated with the PEST model, an evaluation framework was developed to assess AI applications in shipping companies. Based on expert input collected through the Delphi method, four constructs and twelve criteria were identified, with the 'Technological' dimension being the most critical. 'Robustness,' 'Costs,' and 'Data quality' emerged as the top factors affecting AI implementation. The framework offers practical insights for shipping …

Comparative Evaluation Of Deep Learning Models For Predicting Skipjack Tuna (Katsuwonus Pelamis) Catch Based On Climatic Factors, Peng Ding, Hui Xu, Xin Zhuang, Yan-Lun Wu, Fengyuan Shen, Yujie Xiao, Jiensi Zhulidezi, Wei-Yu Lee

Journal of Marine Science and Technology–Taiwan

To investigate the impact of climatic factors on skipjack tuna catch, this study collected and analyzed annual global skipjack tuna catch data spanning from 1960 to 2021, along with corresponding monthly data for the key indicator of El Nino events (Niño1+2, Niño3, Niño4, and Niño3.4), the Southern Oscillation Index (SOI), the North Atlantic Oscillation (NAO), the Pacific Decadal Oscillation (PDO), the North Pacific Index (NPI), and the global sea-air temperature anomaly index (dT). The optimal lag years of climatic factors were identified by selecting the maximum absolute cross- correlation coefficients. Subsequently, the predictive performance of LSTM, BiLSTM, and CNN-BiLSTM models …

Effects Of Train-Ship Direct Transshipment On Container Terminal Operational Efficiency And Energy Consumption: From A Scheduling Perspective, Yiying Du, Yaozong Wang, Zhongzhen Yang

Journal of Marine Science and Technology–Taiwan

On-dock rail integration positions terminals as critical hubs for rail-sea transshipment, which necessitates efficient scheduling for rapid container transfers. Given the strict schedules and batch arrival of railway containers, in this study, we propose a train-ship direct transshipment (TSDT) mode to eliminate nonproductive yard rehandling. To comprehensively evaluate the impact of the proposed mode on terminal handling operations, we developed an operational scheduling model for the entire process of the simultaneous loading of yard containers and railway-handling area (RHA) containers. The model comprises two stages. Stage 1 models the pre-reshuffling operations in the yard before loading, and Stage 2 implements …

Key Success Factors In Using The Lifting Method To Construct A Steel Bridge Pylon, Ming-Chao Su, Hui-Ping Tserng

Journal of Marine Science and Technology–Taiwan

Constructing the inclined steel pylon of cable-stayed bridges is challenging because of the pylon’s height, spatial limitations, and safety concerns. To address these challenges, this study developed a modular lifting method that can enhance the efficiency and precision of pylon construction. The proposed method involves using rotation jigs to temporarily assemble the pylon, horizontal positioning on temporary supports, and synchronized lifting through computer-controlled hydraulic systems. Field implementation on a large-span bridge project revealed that compared with the traditional method, the proposed method resulted in higher welding quality, lower risks associated with great-height operations, and a shorter on-site assembly time. The …

Deep Learning-Based Model For Automated Prediction Of Coastal Changes: A Robust Approach To Environmental Forecasting, Tsair-Fwu Lee, Chu-Ho Chang, Chin-Shiuh Shieh, Chih-Hsien Wu, Jen-Chung Shao, Chien-Liang Chiu

Journal of Marine Science and Technology–Taiwan

The coastline stands as a critical domain encompassing industry and the environment. The escalating global warming, leading to elevated sea levels and intensified wave-current interactions, has given rise to substantial coastal erosion. This predicament, in conjunction with excessive human development and Taiwan's coastal areas' extreme climatic impact, accentuates the perceptibility of coastal beach alterations. As a result, coastal erosion has emerged as a pressing issue necessitating resolution. Traditional methodologies for assessing coastline changes have conventionally relied on manual measurements. However, owing to the fluctuating distance of coastlines, influenced by tidal patterns, extended measurement processes over several months are susceptible to …

Hydrographic Influences On Seasonal Variations In Zooplankton Communities Of Taiwan Bank (Southern Taiwan Strait), Bor-Shyr Chen, Frank Paolo Jay B. Albarico, Mark Ariel D. Malto, Aiza D. Gabriel, Chiu-Wen Chen, Cheng-Di Dong

Journal of Marine Science and Technology–Taiwan

Understanding the factors that control ocean productivity is crucial in fisheries management. Taiwan Bank, located between the Taiwan Strait and the South China Sea, is a highly productive ecosystem due to upwelling events. The total zooplankton community (holozooplankton and merozooplankton), diversity, seasonal changes, and environmental drivers remain unexplored despite its productivity. This study evaluates the seasonal and vertical environmental dynamics in the Taiwan Bank and their impacts on the zooplankton community structure. We collected zooplankton and basic water parameters in March, July, and September 2017 at 5, 25, and 50 meters. We recorded significant seasonal changes in zooplankton composition and …

Model Performance For Predicting Trends And Analyzing The Impacts Of Sea Surface Temperature Changes In The Gulf Of Thailand, Tanatpong Udomchaipitak, Nathaphon Boonnam

Journal of Marine Science and Technology–Taiwan

This study focuses on assessing and improving the predictive performance of sea surface temperature (SST) in the Gulf of Thailand under unique environmental challenges. Data from the Hybrid Coordinate Ocean Model (HYCOM) were utilized, covering the period from July 1994 to June 2024 at depths ranging from 0 to 30 meters. After cleaning the data using the Interquartile Range (IQR) method, the processed dataset was tested using four models: Recurrent Neural Network (RNN) architectures, including Long Short-Term Memory (LSTM) and Gated Recurrent Unit (GRU), as well as Convolutional Neural Networks (CNNs). Model performance was enhanced by tuning the parameters over …

Development Of An Quadcopter Unmanned Aerial Vehicle For Atmospheric Remote Sensing, Omar J. Addasi

Dissertations and Theses

This paper explores the development of a quadcopter unmanned aerial vehicle (UAV, a.k.a. drone) for atmospheric remote sensing of temperature, pressure, humidity, and PM2.5 particulate matter quantities. A 3-D printed drone body is designed and flight tuning is performed. An optimal length for an upward extending mast for the drone body is determined. Low cost, lightweight sensors are compared against higher precision sensors in both static and dynamic conditions. In addition, an initial investigation into the design of a pressure sensor based anemometer is performed.

Advanced Air Preheater Sealing Systems For Enhanced Efficiency And Reliability In Thermal Power Plants, Pavan Kumar Ravulaparthy

Theses and Dissertations

Global electricity generation still relies heavily on thermal power plants, which consume vast amounts of fuel and emit significant amounts of carbon dioxide. A major but often overlooked source of inefficiency in these plants lies within the rotary regenerative air preheater (RAPH), a critical heat-exchange component where air leakage can exceed 20% in aging units. This leakage increases fuel consumption, parasitic fan power, and CO₂ emissions, while degrading boiler reliability.

This research introduces advanced adaptive sealing systems designed to mitigate these losses by dynamically compensating for rotor eccentricity, thermal distortion, and wear under harsh operating conditions. Brush seals, composed of …

Implementation Of Quantized Artificial Neural Networks With Spintronic Stochastic Computing, Saadi Sabyasachi Mr.

Theses and Dissertations

Artificial intelligence or machine learning is going through a rapid expansion. It also incurs significant costs for power and device footprints. Various approaches are being explored to design energy and hardware efficient machine learning models. Stochastic computing has been proposed for efficient machine learning implementation. It requires a source of random number generation which poses some practical challenges. So spintronic solutions such as magnetic tunnel junction has been used for random number generation. Again, spintronic random number generation to implement high precision circuit is prone to device-to-device variations. Hence we designed quantized artificial neural network with spintronic stochastic computing which …

Design And Optimization Of The Injection Molding Process Of Glass Fiber Reinforced Polymeric Car Fender Using Computational Simulation, Synthia Ferdouse

Electronic Theses and Dissertations

The increasing demand for lightweight and energy-efficient materials in the automotive industry has accelerated the adoption of fiber-reinforced polymer composites. This research presents the design and optimization of the injection molding process for glass fiber-reinforced polymer (GFRP) car fenders using computational simulation. The effects of various gate types and locations on key process parameters, including fiber orientation, volumetric shrinkage, shear rate, and fill time, were investigated using Finite Element Analysis (FEA), Autodesk Moldflow Insight 2024, and MATLAB-based Multi-Criteria Decision-Making (MCMD) techniques. Simulations were conducted across multiple configurations involving three, four, and five gates, with several variations in location. Among all, …

Modeling Fluid Flow In Complex Biological Systems: Implications For Dense Tumor Microenvironments, Metastasis, And Bone Cancer, Mohammad Mehedi Hasan Akash

Electronic Theses and Dissertations

The transport of biofluids in physiological systems plays a critical role in understanding and optimizing therapeutic interventions for diseases such as cancer and respiratory infections. This dissertation focuses on developing and validating a comprehensive computational framework for studying multiphase transport in complex biological environments. The research emphasizes the use of Computational Fluid Dynamics (CFD) to simulate and analyze plasma perfusion in solid tumors, particle deposition in respiratory airways, and fluid transport in cancer metastasis and bone cancer systems. By addressing the challenges of modeling biological transport phenomena, this work provides valuable insights into therapeutic planning and experimental validation. The study …

Novel Redox Oxygen Active Materials For Solid Oxide Cells And Thermochemical Hydrogen Production, Jiaxin Lu

Theses and Dissertations

This dissertation investigates novel materials designed to significantly enhance the performance and durability of oxygen electrodes for solid oxide cells and redox active materials for thermochemical hydrogen production. The first part of this work evaluates Ta-doped BaCoO₃₋δ (BCT) and its structural analog SrCoO₃₋δ (SCT), focusing on their catalytic performance in oxygen reduction and evolution reactions. Among BCT compositions (x = 0.1, 0.3, 0.5), the BCT10 (x = 0.1) composition exhibited the highest oxygen vacancy concentration, electronic conductivity, and lowest polarization resistance. However, SCT10 surpassed BCT10 in these critical performance parameters and also demonstrated greater stability over extended operational periods. Notably, …

Molecular Dynamics Simulations Of Key Parameters On Thermal Properties Of Carbon Nanotube Modified Epoxy Composites, Lida Najmi

Electronic Theses and Dissertations

The application of carbon nanotube (CNT)-reinforced epoxy matrix composites (CRECs) has attracted extensive attention in various industrial sectors due to the significant improvement of material properties imparted by CNTs. The thermal behavior of these nanocomposites is governed by complex heat transfer mechanisms operating at different scales, resulting in a complex relationship between the effective thermal response and the microstructural characteristics of the composite. In this study, molecular dynamics (MD) simulations were used to investigate the thermal conductivity of CRECs, focusing on the effects of key parameters such as the length and volume fraction of CNTs, the degree of cross-linking within …

Simulating Positive Ion Distribution In The Protodune Single Phase Detector, Vishnu Pfeiffer

Electronic Theses and Dissertations

This work covers the validation and implementation of a model to solve for argon ion (Ar+) distribution in the ProtoDUNE-SP liquid argon time projection chamber (LArTPC). ProtoDUNE-SP undergoes a constant flux of cosmic ray muons due to surface operation. The performance of the ProtoDUNE-SP provided valuable insights into single-phase technology, membrane cryostat technology, and calibration of cryogenic instrumentation. Still, challenges in achieving precise measurements persist due to the space charge effect—the distortion of the electric field within the detector due to the accumulation of positive argon ions generated from constant cosmic muon flux. The overarching goal of this thesis is …

Trustworthiness And Trust: Identifying Factors That Drive Successful Human-Ai Interaction In Nuclear Power Plant Applications, Yusuke Yamani, Austin Jackson, Casey Kovesdi, Jeffrey Joe, Jeremy Mohon

Psychology Faculty Publications

Emerging technologies such as artificial intelligence (AI) and machine learning are rapidly evolving and promising tools for efficient and continued safe operations of the U.S. nuclear power plants (NPPs). Emerging AI techniques like large language models (LLMs) are one such technology that may help personnel at existing NPPs perform work more efficiently. For example, operators may query the current operational status of a power plant via a chat interface, leveraging LLMs to access plant-related information in an interactive manner rather than manually collecting various sensor data for surveillance or work order tasks. This is a fundamental shift in the way …

Integrating Machine Learning And Symbolic Regression For Predicting Damage Initiation In Hybrid Frp Bolted Connections, Sherif Sorour

Mechanical Engineering

No abstract provided.

Bio-Inspired Airfoil Design Based On The Aerodynamic Analysis Of A Bird Feather Microstructure, Jack C. Ihm

College of Graduate Studies: Theses & Dissertations

This study investigates the aerodynamic effects of a bio-inspired airfoil design based on the microstructure of a secondary feather from a female wood duck. The research hypothesized that incorporating barbs and barbules into an airfoil design would modify boundary layer behavior by introducing localized flow disturbances. To test this, a bio-inspired airfoil was developed by integrating the microstructure into a NACA 0012 airfoil and analyzed using computational fluid dynamics (CFD) simulations at angles of attack of 0°, 5°, 10°, and 15°. The results showed that the bio-inspired airfoil influenced boundary layer behavior, producing localized flow disturbances near x/c = 0.7 …

Ease Of Product Disassembly Through A Systematic Structured Time-Based Design For Disassembly Methodology, Emeka S. Igwe

College of Graduate Studies: Theses & Dissertations

This research introduces a systematic time-based design for disassembly (DfD) framework aimed at optimizing product disassembly by addressing important features like liaisons between components in product, component accessibility and the overall modularity of the product. This study specifically covers electromechanical and mechatronic systems in both household and industrial setup, identifying their disassembly challenges and high value pointers for improvement. The methodology involves using a design for disassembly framework called LeanDfD in carrying out a holistic disassembly process and evaluating quantitative metrics like disassembly time and complexity and suggesting further redesign strategies to minimize disassembly time and cost. Adopting this systematic …

A Finite Volume-Based Approach For Modeling Hyperbaric Oxygen Therapy For Healing Chronic Wounds, Cade M. Layser

College of Graduate Studies: Theses & Dissertations

The current number of people in America with diabetes is approximately 38.4 million, that population is expected to rise to 54.9 million by 2030. Chronic wounds, which are characterized by impaired or stalled healing, are commonly associated with diabetes. These wounds if not treated properly can cause significant complications such as sepsis, infection, and gangrene which can lead to limb amputation or death of the patient. Limb amputations can be a large financial burden and significantly reduce the patient’s quality of life. The timely and efficient treatment of chronic wounds is essential to prevent adverse patient outcomes. Hyperbaric Oxygen therapy …

Synthesis And Processing Of Co-Axial/Tri-Axial Multi-Layered Nano-Particles, Jannatul Ferdaus

College of Graduate Studies: Theses & Dissertations

Electro-spraying has been used as an effective processing method of nanoparticle fabrication for the application of targeted drug delivery. The study demonstrates the feasibility of a non-conventional triaxial electro-spraying setup for multi-layered nano-drug fabrication and proposes optimized parameters. Two different drugs, XAV939 and Dextran 40000, were used to study the process parameters (voltage and solution concentration) of coaxial electro spraying. The particle size of Dextran-PCL was an average of 166.3 nm for PCL-Dextran at 32.5 kV and 18-hour sonication. The SEM analysis and UV-spectrum showed the encapsulation of Dextran with PCL, though the in vitro study in mice after 24 …