Digital Commons Network^™

An Experimental Investigation Of The Effects Of Ambient And Heated Steady Flow And Intense Sound Levels On The Response Of Acoustic Filter Elements, Raymond H. Schaffart

Doctoral Dissertations

"The primary purpose of this research was to investigate the effects of flow and finite amplitude waves on the response of acoustic elements. A further purpose was to evaluate the effects of elevated temperatures and cross-sectional dimensions on element performance. As an integral part of this work various laboratory techniques were explored for their suitability.

Empirical models for the acoustic impedance of side branch resonators were developed for the two operational modes, i.e., flow past the resonator and finite amplitude wave inputs. A description of the complex variation of the acoustic resistance of the resonator with flow past and variable …

Force Analysis Of Involute Spur Gears, Janakkumar Girjashanker Dave

Masters Theses

"This study is devoted to the fundamental action which occurs between spur gears with involute tooth profiles when power is transmitted at a constant angular velocity ratio. Various aspects of the interaction between two mating teeth are considered. Analytic expressions for the variation of the force transmitted between two teeth are derived. Two cases are considered which include and exclude the effects of sliding friction between the teeth. The parametric equations of the involute curves for two mating teeth are derived in terms of body-fixed coordinates. Analytical expressions for Hertz compressive stresses in the teeth were also obtained. The same …

A Study Of Plane Wave Filter Analysis With Flow, Thomas Valle Huber

Masters Theses

"The purpose of this investigation is to determine the effect of slow steady flow on the reflection and transmission characteristics of acoustic filters.

A standing wave tube and transmission tube apparatus, designed and built by a previous investigator, was modified to accept slow steady flow. Reflection characteristics were determined from measurements made on the inlet side of the filters investigated. These data along with measurements taken with the transmission tube apparatus were used to determine transmission characteristics. The calculations were simplified by terminating the filters anechoically. The filters used in this investigation were an expansion chamber, an automobile type muffler …

Design Of A Torsional Vibration Machine, Prafulchandra Pragjibhai Desai

Masters Theses

"In this thesis the design of the major components of a torsional vibration machine is presented. The machine is a torsional vibration actuator which will deliver a mean output angular velocity with a superimposed harmonic component. This type of motion can be used to study the torsional vibration characteristics of models representing crankshafts, gear trains, torsional dampers, and other systems. The primary machine elements of the actuator are a power source, flywheel, and a Hooke's joint. The power source consists of a D.C. shunt motor and a drive transmission using 3 V-belts. Through the use of a Hooke's joint, approximate …

The Effects Of Intense Sound Levels And Steady Flow On The Propagation Of Plane-Waves In Air, Wuu Hao

Masters Theses

"This thesis is a theoretical investigation of the effects of intense sound levels and steady flow on the propagation of plane-waves in tubes of constant diameter. The analysis is limited to a study of the change of wave profile due to the intense sound levels, and steady flow. However, corrections for effects of viscous and heat conduction losses at tube walls are also presented. To simplify the analysis, the problem is treated by considering the steady flow and finite-amplitude-sound wave effects separately. For finite-amplitude sound only, two approaches are evaluated. The first uses small perturbations to derive a finite-amplitude wave …

Transient Cooling Of A Sphere Due To Boiling, Salil K. Banerjee

Masters Theses

"The time - dependent surface temperature is determined for a sphere subjected to cooling by boiling. One dimensional heat transfer is considered and the solid is assumed to be homogeneous, isotropic and opaque to thermal radiation and to have temperature independent physical properties. The initial temperature of the sphere and the coolant are assumed to be uniform and arbitrary. The boiling heat transfer coefficient at the surface of a sphere is a strong function of the surface temperature thus resulting in an extremely nonlinear transient heat conduction problem. As a practical application of the problem, the process of quenching has …

Application Of Transmission Matrices To Describe Transverse Vibrations Of Non-Uniform Bernoulli-Euler Beams, Dean Irle Parker

Masters Theses

"This report investigates the application of transmission Matrices to determine natural frequencies of non-uniform Bernoulli-Euler beams. The classes of non-uniform beams considered includes: truncated wedges, truncated cones, and truncated rectangular pyramids. Two transmission matrices were derived from solutions to the Bernoulli-Euler equation. One was an exact closed form solution which was applicable for the above classes of beams excluding uniform and nearly uniform beams. The second solution was an approximate one limited to the use for nearly uniform beams, but which does give the correct solution to the uniform beam in the limiting case. The transmission matrix has two advantages: …

The Analog Simulation Of Heat Transfer Devices For The Smoothing Of A Fluctuating Fluid Temperature, Le Thai Son

Masters Theses

"Equations are written to describe a heat exchanger with electrical energy input and also a large tank system which can have electrical energy input. The output temperatures were sampled and fedback to define the energy input to the two systems. These systems were simulated on an analog computer and the ability of the two systems to smooth a fluctuating temperature input was tested. The testing of the systems included trying different types of controllers in the control system as well as different size tanks for the tank system. A satisfactory smoothing of the output temperature was demonstrated after some modifications"--Abstract, …

Analysis Of A Substitute For The Impact Damper To Damp Near-Resonant Mechanical Vibrations, Nguyen Khanh Van

Masters Theses

"This report investigates a substitute for the impact damper which, although highly effective in reducing vibration amplitudes of near-resonant mechanical systems, in operation causes often unacceptable intensive noise. The present damper consists of a piston free to move in a cylinder, at either end of which is a ball valve set to open at a preset pressure, and in the middle along its length an intake port. An approximate analytical study is made to determine the conditions for the existence of "noiseless periodic operation" of the damper, periodic operation without the occurence of impacts. This approach is based on the …

A Yield And Fracture Model For Ti-6al-4v Titanium And 7075-T6 Aluminum, Richard L. Pendleton

Doctoral Dissertations

"The objective of the research being reported in this thesis was to conduct a series of experiments on two commonly used structural metals in several different environmental pressures so that a graphical representation of the material response both to yielding and fracture could be ascertained. It was further intended to show that parameters herein defined and called effective stress, effective strain, and pressure are useful parameters for graphically representing the material response. The final goal of this research was to show that the graphical representation does, in fact, predict the yield and fracture for a simple forming process. The forming …

An Exact Analysis Of Two-Dimensional Radiative Transfer In An Absorbing And Emitting Gray Medium, William F. Breig

Doctoral Dissertations

"The exact formulations for the radiative flux and the emissive power are presented for a two-dimensional, finite, planar, absorbing and emitting, gray medium in radiative equilibrium. Exact expressions are obtained for the medium subjected to the following types of boundary conditions: (1) cosine varying diffuse, (2) cosine varying collimated, (3) constant temperature strip, and (4) the strip illuminated by a uniform collimated flux. The solutions for the physically unrealistic cosine varying models are used to construct the solutions for the more practical finite strip models. The two-dimensional equations are reduced to one-dimensional equations by the method of separation of variables. …

The Application Of Impact Dampers To Continuous Systems, Ranjit Kumar Roy

Doctoral Dissertations

"A study has been made of the application of impact dampers to two types of continuous systems, a simply supported and a clamped beam. Previous efforts have included the effect of impact dampers on single degree of freedom and other systems with finite numbers of degrees of freedom.

Experimental models were tested in the laboratory and finite element computer programs were developed to calculate response. Results from calculations agree favorably with experimental tests. Further, results from the first few natural modes also compare reasonably with data published on systems with finite number of degrees of freedom.

Curves are presented which …

Modal Truncation Of Substructures Used In Vibration Analysis, Suresh Kumar Tolani

Doctoral Dissertations

"The objective of this study is to describe in a unified manner a group of structural dynamics analyses using the substructures technique. An additional effort is to provide a consistent basis for the selection of substructure principal modes as required by this method. Substructure principal mode frequency roots and strain energy are two criteria evaluated for the selection of substructure principal modes. System eigenvalues and system strain energy are investigated for the comparison of results in the principal modes. System strain energy should provide more rational results since it is proportional to the stress times the strain in the system …

Determination Of Thermal Contact Resistance Between Metals Using A Pulse Technique, William Edward Stewart Jr.

Doctoral Dissertations

"This dissertation reports the results of an experimental and analytical investigation to determine the thermal contact resistance of several metal specimen pairs using a relatively new pulse technique. Metal specimens were aluminum 2024-T3, aluminum 6061-T6, aluminum 7075-T6, copper 110, stainless steel 304, molybdenum, and Armco iron. Thermal contact resistance was also determined for dissimilar metal specimen pairs of aluminum 6061-T6 - copper 110 and aluminum 7075-T6 - copper 110. Aluminum 7075-T6, copper 110, and stainless steel 304 specimens were tested to determine the variance of contact resistance with time after loading.

Specimens were circular cylindrical disks between .033 and .061 …

Methods And Applications Of Systems Identification, Allen Glenn Behring

Doctoral Dissertations

"A "Schmidt filter" is proposed to compute an optimal orthonormal basis for a set of "noisy" filter input functions. Procedures for determining the transfer function and inverse transfer function of the filter are given. The Schmidt filter is applied to the problem of determining mathematical models of discrete, stationary, linear, dynamic systems for the case where measurements may be corrupted by noise of unknown statistics. The identification problem is reconsidered for the case where noise and signal moments are specified. Procedures are given which insure unbiased, adaptive estimates of system order and parameters for this case. These theoretical propositions are …

The Steady-State Response Of A Fluid-Filled Beam Near Resonance, Niranjan Jayantibhai Patel

Masters Theses

"In this report the steady-state near-resonant vibration of a hollow fluid-filled beam is considered. The energy dissipation caused by the beam-fluid interaction is approximated by introducing a viscous damping force into the Bernoulli-Euler beam equation. A theoretical expression is developed for the displacement of the hollow beam by solving this modified Bernoulli-Euler beam equation. Tests are made using a cantilevered fluid-filled box to simulate a unit of beam-fluid length. The band-width technique is used to determine the incremental viscous damping coefficient from test data. A variety of fluids are used in the box to determine the effect of the fluid …

An Experimental And Numerical Study Of Elastic Strain Waves On The Center Line Of A 6061-T6 Aluminum Bar, J. L. Habberstad, K. G. Hoge, J. Earl Foster

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The elastic strain waves resulting from the impact of two 3/4-in-dia 6061-T6 aluminum bars are studied experimentally and analytically. Experimental data are obtained from strain gages on the center line and outer surface of the bar, located at various distances from the impact end of the bar. Experimental data are compared to numerical results obtained from integrating the exact equations of two-dimensional motion. In general, agreement between the numerical and experimental results is very good. © 1972 by ASME.

A Strain Energy Comparison Of Discrete Modeling For Vibrating Continuous Systems, S. K. Tolani, Richard Dale Rocke

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Lumped parameter models commonly used to describe continuous one-dimensional and Bernoulli-Elder beam vibration problems have been compared on the basis of maximum system, strain energy. The consistent mass matrix approach has been included in the comparison. Standard matrix techniques have been employed to mathematically obtain desired solutions. Closed form solutions and solutions via the models to Ike system strain energy were obtained for all systems in three dynamic states: Free vibrations, constant base acceleration, and half sine base acceleration. Behavior of the strain energy errors, in general, were found to be similar to those of the frequency root errors. © …

Wind Tunnel Modeling Of The Atmospheric Boundary Layer, Sreemanth Pagadala

Masters Theses

"The importance of simulating atmospheric flows in wind tunnels has been well established. Experiments were conducted in the Modified Aerodynamic Wind Tunnel to determine the suitability of this wind tunnel for simulating atmospheric flows and the degree to which various aspects of modeling could be fulfilled. A temperature profile to simulate the inversion aloft was generated inside the test section, and then an appropriate velocity profile was built in by means of screen mesh arrangements. The turbulence characteristics of the flow were measured. The validity of the temperature, velocity and turbulence fields were examined. It was found that while the …

Computer Solution To Inverse Problems Of Elliptic Form: V²U(X,Y) = G(A,U,X,Y), Frederick Alvin Jeter

Dissertations and Theses

One important aspect of our present age of monolithic high speed computers is the computer's capability to solve complex problems hitherto impossible to tackle due to their complexity. This paper explains how to use a. digital computer to solve a specific type of problem; specifically, to find the inverse solution of a in the elliptical equation V²U(x,y) = g(a,U,x,y), with appropriate boundary conditions. This equation is very useful in the electronics field. The knowns are the complete set of boundary values of U(x,y) and a set of observations taken on internal points of U(x,y). Given this information, plus …

A Time Domain Deconvulution Technique For The Correction Of Transient Measurements., Larry Wayne Bickle

Mechanical Engineering ETDs

Techniques for correcting transient measurements can be considered as "deconvolving" or solving the convolution integral equation

R(t)=F(0) * C(t) + ∫t_0 C(t- Τ) [dF(T)/dT] dT

for the input, F(t), given the response, R(t), and response of the measurement system to a step input of unit magnitude, C(t). Because the deconvolution process is mathematically ill conditioned, it is usually necessary to place additional constraints on the functions F(t), C(t) and/or R(t).

In this paper, a numerical time domain deconvolution

(TDD) technique that provides physical insight into the problems of correcting transient measurements is presented and compared to techniques that have previously …

Combined Thermal Weakening And Mechanical Disintegration Of Hard Rock, George Bromley Clark, T. F. Lehnhoff, Gary F. Fenton, M. R. Patel, Jaw K. Wang, Vernon Dale Allen

Mining Engineering Faculty Research & Creative Works

This investigation of the combined effects of thermal weakening and mechanical disintegration (thermomechanical fragmentation) was initiated with a view toward better understanding of the processes required for more rapidly and economically fragmenting or excavating hard rock. Boring machines for utility tunnels, transportation tunnels or mining operations may be able to utilize the advantages of processes such as thermomechanical fragmentation. Secondary fragmentation or rock crushing processes also can conceivably employ the data obtained from this study.

A New Technique For Steady State And Transient Analyses Of Incompressible Flow Networks, George V. Catanzaro

Theses

A new technique for the calculation of the transient or the steady-state mass flow rate and pressure distribution in incompressible flow networks is presented. Employing the matrix method of network analysis, the nodal continuity and branch momentum equations are solved simultaneously to obtain explicit relations giving the unknown nodal pressures and branch mass flow rates. In this manner, the transient or the steady-state behavior of incompressible flow networks with arbitrary configuration having nodal sources and sinks as well as branch transducers can be determined. In contrast with the conventional steady-state network analysis methods, the new technique can be extended to …

Transient Convective Heat Transfer Coefficient For Injection Into Rigid Vessel, James Edward Steiger

Theses and Dissertations

The purpose of this study was to develop and demonstrate a method for experimentally determining the convective heat transfer in a rigid vessel while air was being injected. The heat transfer took place between the air in the pressurized vessel and the surrounding walls which were maintained at a temperature of 32 F. with a circulating ice water bath. The study considers the effects of injection geometry and injection flow rate on the heat transfer process. The problem of heat transfer after injection has been considered by Means (1), and was responsible for establishing this study. The experimental technique used …

A Theoretical And Experimental Study Of An Unsteady Pressure Measuring System, Ramesh R. Batki

Mechanical & Aerospace Engineering Theses & Dissertations

Experiments were performed to determine the frequency response of gas filled instrument tubes, and the results were correlated with a theoretical model. The theoretical model developed by Bergh and Tijdeman for a series connection of thin circular tubes and volumes was studied in full detail and employed. A measuring system was designed and built to measure pressure ratio and phase lag employing thin nylon or vinyl tubes and strain gage transducers. 1'leasurements were performed using cathode ray tube, strip chart, analog techniques and also a commercial electronic function analyzer and the various results were compared. The theoretical and experimental influence …

An Experimental Investigation Of The Vortex Sink Rate Sensors, Nelson L. Lu

Mechanical & Aerospace Engineering Theses & Dissertations

The vortex sink rate sensor device consists basically of an ideal sink flow between two coaxial disks. A sink tube was located at the center of one disk. The vortex was created by the rotation of the unit about its axis of symmetry. Five inch and 10 inch diameter of porous couplers were used for the air chamber here in this investigation. Several slenderness parameters, i.e., the ratio of the sink tube diameter to the height of the air chamber ^ro/n were conducted. Two probes were used to measure the static pressure and stagnation pressure respectively at various positions …

A Theoretical And Experimental Study Of The Mechanism Of Axoplasmic Convection In Nerve Fibers Driven By Peristaltic Surface Waves, Robert John Biondi

Dissertations

In the study of cell biology, investigators have found that substances which are produced within the cell nucleus are sometimes found throughout the cell at points distant from the site of production. In the case of nerve cells (neurons), this is particularly dramatic because of the unusual elongated geometry of these cells.

A neuron possesses a cylindrical tubular extension called an "axon" or "axis cylinder" which is characterized by a large length-to-diameter ratio (10³-10⁶). The existence of a continuous proximo-distal flow of axoplasm within these cylindrical axons has now been demonstrated by numerous investigators. In …

On The Phenomenon Of Vortex Street Breakdown, William W. Durgin, Sture K.F. Karlsson

Office of the Provost Scholarship

A von Kármán vortex street generated in the usual way was subjected to a deceleration, thereby changing the ratio of longitudinal to lateral spacing between the vortices. Distortion of the individual vortices followed which resulted in annihilation of concentrated vortex regions and creation of a stationary wake flow. This wake flow was itself dynamically unstable and developed into a new vortex street of a different frequency from the initial one. The breakdown of the initial vortex street is qualitatively explained by considering the convection of a concentrated vortex region due to the motion imposed by all the other vortices.

Test 1069: Minneapolis-Moline G-1350 Diesel (Also Oliver 2155 Diesel) 10-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1071: Kubota L-210 Diesel 6-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …