Digital Commons Network^™

Test 1515: Ford Tw-15 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1516: Ford Tw-25 And 8730 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1511: Massey-Ferguson 3505 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1512: Massey-Ferguson 3525 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1513: Massey-Ferguson 3545 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Fundy Tidal Power Development : Preliminary Evaluation Of Its Environmental Consequences To The Resources Of The State Of Maine, Bigelow Laboratory For Ocean Sciences

Maine Collection

Fundy Tidal Power Development : Preliminary Evaluation of Its Environmental Consequences to the Resources of the State of Maine

A Report to the Maine State Planning Office by the Bigelow Laboratory for Ocean Sciences, April, 1984.

"Technical Report No. 35 - Bigelow Laboratory for Ocean Sciences, West Boothbay Harbor, Maine - A Division of Northeastern Research Foundation, Inc."

Contents: Executive Summary / Introduction / Methods / Physical and Biological Consequences / Socio-Economic Consequences / Research Needs / Bibliography / Appendix I. Written Comments on Greenberg Model

Shape Optimization For Elastic Hollow Bars In Torsion, Jahau Lewis Chen

Mechanical & Aerospace Engineering Theses & Dissertations

The problem of finding optimal cross-sectional shapes of elastic hollow bars in torsion is formulated and solved numerically. A variational formulation for the state equation is presented, and the material derivative of continuum mechanics is used for the shape design sensitivity analysis. Performance criteria include the bending stiffness, the torsional rigidity, and the weight of the bar. The existence of a keyway, an example of geometric irregularity, can be considered as well. The material can be either isotropic or anisotropic. The finite element method is used for the numerical solution of the variational state equation and is integrated into an …

The Development Of A Microprocessor Controlled Linearly Actuated Valve Assembly, Raymond H. Wall

Mechanical & Aerospace Engineering Theses & Dissertations

The development of a proportional fluid control valve/assembly is presented. This electro-mechanical system is needed for space applications to replace the current proportional flow controllers that use bulky hydraulic or pneumatic actuation systems. The flow is controlled by a microprocessor system that monitors the control parameters of upstream pressure and requested volumetric flow rate. The microprocessor achieves the ·proper valve stem displacement by means of a digital linear actuator. A linear displacement sensor is used to measure the valve stem position. 'Ibis displacement is monitored by the microprocessor system as a feedback signal to close the control loop. With an …

Test 1508: Ford 1910 (12x4) Synchro Diesel 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1509: Ford 2110 (12x4) Manual Diesel 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1510: Ford 2110 (12x4) Synchro Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1507: Ford 1910 (12x4) Manual Diesel 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Analysis Of Deflection Temperature Under Load, Anand M. Jagani

Theses

Deflection Temperature Under Load (DTUL) is an experimental value commonly used by designers to characterize a plastic in a high temperature environment. This value is currently measured by a standard test procedure specified by the ASTM D-648. A theoretical analysis of this test was made and computer programs were developed to calculate the Deflection Temperaure of Plastics Under Load based upon temperature dependent flexural modulus data and temperature dependent thermal properties of the plastics of interest. The results obtained from the theoretical analysis agree closely with the experimental values found in the literature for two resins. An analysis of the …

Test 1532: Hesston 80-66dt And 80-66 Fiat Diesel 12-Speeds, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Nebraska Summary S020: Zetor 12145, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary S113: Agco Allis 7650, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary S018: Zetor 10145, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 1538: Massey-Ferguson 670 Diesel And Massy-Ferguson 270 Multipower Diesel 12-Speeds, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1536: Ford Tw-15 Fwd Diesel Also Ford 8630 Diesel 16-Speeds, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Nebraska Summary S021: Zetor 16145, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary S019: Zetor 12111, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Underwater Acoustic Wavefront Phase Fluctuations, George L. Vojtech Jr.

OES Theses and Dissertations

In conventional underwater acoustics sound propagation is generally modeled and applied as a coherent or incoherent process. This paper addresses a relatively new theory, that of a range driven increasingly incoherent ray propagation through a real ocean environment, Possible mechanisms are discussed and experimental data presented to reinforce the theory.

A Thermal Contact Conductance Correlation For Mechanically Expanded Finned Tube Heat Exchangers, Mahmoud Ahmed Abu Ebid

Masters Theses

"Tests were conducted in dry vacuum environment, on eight mechanically expanded finned tube heat exchangers (with 3/8 inch outer diameter tubes) with different geometries including variation in fin thickness, fin collar length, and net interference. One of the eight heat exchangers was also tested under wet conditions. A mathematical model was used to calculate the thermal contact conductance from the experimental data. An error analysis was performed to estimate the range of error in determining the thermal contact conductance. A correlation of the dry contact conductance in terms of fin number (actual fin collar length in contact with the tubes), …

Modeling Of Purge Valve Closure, William W. Durgin, Benito Zannini

Office of the Provost Scholarship

In some nuclear reactor containment isolation applications, butterfly valves with pneumatic actuators are used to close pipelines in the event of containment pressure transients resulting from postulated accidents. A model is developed which predicts the closure time history of such valve/actuator systems under prescribed transients. Examples are presented which show the importance of the valve and actuator characteristics. It was found that actuation delays of sufficient magnitude could allow the dynamic torque to exceed the available actuator torque, thus preventing valve closure.

An Interactive Procedure For Numerical Design Optimization, Jaehwan Lee

Theses

An interactive version of the numerical design optimization method of Pappas for the solution of nonlinear optimization problems is presented in this thesis, A designer intervention strategy is employed herein for interactive optimization to allow the designer to control and manage the optimization process. This procedure embodied in the interactive CADOP6 program is tested on the ten bench mark problems of Eason and Fenton to illustrate the designer intervented optimization process and to provide a comparison with the fully automated procedure of Pappas This designer intervented interactive program appears more effective and faster than the completely automated CADOP5 code on …

Measurement Of Thermal Conductivity Of Polymers Using Line Source Method, Manojkumar C. Patel

Theses

The purpose of this investigation was to evaluate the Line Source technique to measure the thermal conductivity of different molten polymers. Although the results obtained using this method are within acceptable experimental error limits, due to tec reasons explained, the results are not as accurate as claimed in the literature which describe this technique.

Experiments On Melting Around An Isothermal Horizontal Cylinder Under Computer Control, Timothy Moore Rothgeb

Mechanical & Aerospace Engineering Theses & Dissertations

The melting of a solid around an isothermal horizontal cylinder is a physical phenomenon which must be understood when attempting to design a latent heat storage system. The desire to design such a system is the motivating factor in this research. To gain this understanding of the fundamental melting processes several experiments were designed, and two sets of Stefan and Rayleigh number experiments were undertaken. Experiments were also performed to determine the properties of the paraffin that was used in these investigations. During the investigations of the melting processes, the temperature was measured at several locations throughout the liquid and …

The Quasisteady Approach For Thermal Analysis Of Frost Action Below Refrigerated Warehouses, Milan Kumar Bag

Theses

The quasisteady method of analysis has been used to determine the frost depth below refrigerated warehouses. For the case when the ground temperature is different from phase change temperature, the solution is obtained by numerical integration of the equation governing the phase change process. When the ground temperature approaches the phase change temperature closed form solution is obtained. The results obtained from the quasisteady method compare well with the experimental results. The results presented in this thesis should find use in the design of the refrigerated warehouses in the colder regions of the world.

The Relative Importance Of Competencies Needed By Industrial Energy Managers From The Larger Manufacturers In Iowa, Timothy J. Eibes

Graduate Research Papers

The importance of identifying the competencies needed by energy managers is reflected in the seriousness of the energy problem and the impact it has on the industrial setting. The newness and ambiguity of EM, coupled with the increasing importance of the concept, add to the need for identifying the necessary competencies required in managing energy.

Ideally, once these competencies are identified, they should be the focus of those educational curriculums designed to produce energy managers. Currently there are only 25 post-high school institutions in the U.S. that have energy management curriculums (The College Blue Book, 1981). Less than half of …

Entry-Level Computer Aided Design And Drafting Skills, Stephen D. Rockey

Graduate Research Papers

The purposes of the study were to:

1) determine the entry-level competencies necessary for CAD system operation, and

2) rank in order of importance the competencies identified to be necessary for entry-level CAD system operators.