Digital Commons Network^™

Fuzzy Based Forebody Vortex Flow Controller For The X-29a Aircraft, Jin Suzuki

Masters Theses

This paper demonstrates the development and performance of A Fuzzy Logic based regulator for an aircraft which is equipped with pneumatic forebody Vortex Flow Controller at high angle-of-attack flight condition. The VFC provides the pilot additional control power at flight conditions where conventional effectors such as rudder and differential flaps lose effectiveness.

Fuzzy Logic Control (FLC) is applied to a mixed bang-bang and conventional type control system. This unique configuration ensures robustness of the system and simplifies the controller design. Performance of the FLC based regulator shows a 10.3% reduction in cost function compared to the system controlled by a …

Particle Deposition From Turbulent Flow In A Divergent Channel, Wai-Ting Huang

Dissertations

This dissertation presents a numerical analysis of particle deposition from a dilute gas-solid two-phase suspension in a divergent channel. The Lagrangian governing equations for particle motion include inertia force, viscous force, gravity force and image force from electrostatic charge on the particle. The incompressible two-dimensional turbulent flow field in a divergent channel is solved by employing a Κ-ε modeling technique with FIDAP finite element CFD software. A computational procedure is developed to incorporate the flow field into numerical simulation of particle trajectories from which the fraction of deposition is determined. Several divergent channels (half divergent angles of 0°, 7.5°, 10° …

Modeling Of 3d Swept Volumes Using Sde/Sede Methods And Its Application To Five-Axis Nc Machining, Liping Wang

Dissertations

This research falls in two important areas in solid modeling and manufacturing automation: (1) swept-volume modeling; (2) computer-based NC (Numerically controled) machining simulation and verification. The swept volume is defined as the volume swept by an object undergoing an arbitrary motion. Modeling of 3D swept volumes includes the boundary computation and representation of a swept volume generated by a general object undergoing general motion in three dimensional space. The Sweep Differential Equation (SDE) and Sweep Envelope Differential Equation (SEDE) methods are two of the important swept volume modeling methods employed in this dissertation. They exploit differential equations to obtain the …

The Fatigue Problems Of Cracks Subjected To Obliquely Incident Stress Waves, I-Chung Weng

Dissertations

Catastrophic failure of aircraft and other structures are often caused by undetected cracks. Fracture mechanics has been developed to augment traditional static and fatigue design. In the static theory of fracture mechanics, extensive treatment has been given to the stress distribution around sharp cracks and notches under various loading conditions. Previous works on the problems of dynamic loadings are not accurate in dealing with singularities at high frequencies. The numerical solutions become unrealistic at high frequencies in many practical applications.

To address the need to obtain the stress intensity factor in high frequency dynamic loading situations, we studied the use …

Parameters' Analysis Of 3d Random Stacking Palletization, Najeeb Syed

Theses

Palletization is a very important element of production, distribution and warehousing activities. The 3D random stacking palletization method is based on volume utilization instead of surface area optimization. Random stacking provides interlocking among the boxes and hence it improves the stability of the pallet load. Volumetric Pallet Utilization is normally the prime concern of any palletization process, with Work in Process and Palletization time being also important. This research uses data generated from a previous heuristic to establish mathematical relationships between the three mentioned performance indices and also three additional indirect variables, namely: Total Number of Sub Volumes, Partitioned Remaining …

Finite Element Analysis Of Skin Injuries By Water Jet Cutting, Syed Muhammad Arif

Theses

High pressure water jets are used in industry for cleaning and cutting purposes. These devices can generate pressure up to 400 MPa. As high pressure water jets become more widespread in industry, injuries will be seen with great frequency. Penetrating injuries by these devices can produce minimal external evidence of extensive soft tissue injury. To know the extent of injury, it is important to study the relationship between operating parameters of water jet and the skin layers. A computational analysis is carried out using finite element method to find the effects of water jet pressure on the skin layer. Finite …

Freezing Point Mobile Munitions Assessment Sytem: Thermal Chamber Redesign, Sara Gifford, Preston Harris

Undergraduate Honors Capstone Projects

The Army is actively investigating non-intrusive methods to identify six chemical weapons agents. The chemical munitions in question are often found scattered across military bases and other facilities. These non-stockpile munitions are specifically targeted for identification using the mobile munitions assessment system. This program is being administered by the Idaho National Engineering Laboratory.

Analysis And Testing Of Plates With Piezoelectric Sensors And Actuators, Jeffrey S. Bevan

Mechanical & Aerospace Engineering Theses & Dissertations

Piezoelectric material inherently possesses coupling between electrostatics and structural dynamics. Utilizing linear piezoelectric theory results in an intrinsically coupled pair of piezoelectric constitutive equations. One set describes the direct piezoelectric effect, where strains produce an electric field, and the other set describes the converse effect, where an applied electrical field produces strain. The purpose of this study is to compare the finite element analysis and experiments of a thin plate with bonded piezoelectric material.

Since an isotropic plate in combination with a thin piezoelectric layer constitutes a laminated composite, the classical laminate plate theory is used in the formulation to …

Three-Dimensional Aerodynamic Design Optimization Using Discrete Sensitivity Analysis And Parallel Computing, Amidu Olawale Oloso

Mechanical & Aerospace Engineering Theses & Dissertations

A hybrid automatic differentiation/incremental iterative method was implemented in the general purpose advanced computational fluid dynamics code (CFL3D Version 4.1) to yield a new code (CFL3D.ADII) that is capable of computing consistently discrete first order sensitivity derivatives for complex geometries. With the exception of unsteady problems, the new code retains all the useful features and capabilities of the original CFL3D flow analysis code. The superiority of the new code over a carefully applied method of finite-differences is demonstrated.

A coarse grain, scalable, distributed-memory, parallel version of CFL3D.ADII was developed based on "derivative stripmining". In this data-parallel approach, an identical copy …

Input Design For Systems Under Identification Using Indirect And Direct Methods, Marco P. Schoen

Mechanical & Aerospace Engineering Theses & Dissertations

The motivation for system identification can be manifold. In this work, the provocation to identify unknown system characteristics is derived from the control engineering point of view. That is, one intends to design a control strategy based on the identified system properties. The used system identification methods are the Open-Loop Kalman filter System Identification method (OKID) and the Closed-Loop System Identification method (CLID). It is shown that the quantitative largest error of the system identification is given by its model representation, that is the attempt to describe a system with model parameters which poses a linear relationship with the input/output …

Tool Condition Monitoring: A Computational Approach, Anthony Clinch

Dissertations and Theses

Tool Condition Monitoring offers a new approach to reducing the costs associated with catastrophic tool failure. The manufacturing process is becoming more computationally oriented all the time. Computational methods of determining the condition of cutting tools will lend themselves to easy integration with current and forthcoming manufacturing techniques. Coupling the results of this computational approach with a cost analysis will provide a means of maximizing the investment in cutting tools, while minimizing the damage caused by tool failure. Tool Condition Monitoring, as defined here, is a method of computationally determining the condition of a cutting tool. The problem of determining …

Analytical Solutions Of Openings Formed By Intersection Of A Cylindrical Shell And An Oblique Nozzle Under Internal Pressure, Hengming Cai

Dissertations

Since several decades ago, many authors have published their research results about local stress distributions of shells and shell-nozzles both analytically and numerically. However, there has not been a published paper, which deals with analytical solutions of cylindrical shell and oblique nozzle, even though in the case of openings formed by intersection of a cylindrical shell and an oblique nozzle.

A comprehensive analytical study of local stress factors at the area of openings formed by intersection of a cylindrical shell and an oblique nozzle under internal pressure is presented in this dissertation.

By means of traditional approach in theory of …

Shaped Charges Having A Porous Tungsten Liner-An Experimental And Theoretical Study Of Metal Compression, Jet Formation And Penetration Mechanics, Brian Edward Fuchs

Dissertations

The use of porous tungsten as a liner for shaped charges to improve their penetration was proposed by Ki-Hwan Oh in his invention disclosure "Shock Extrusion of Ingots from Powders or Solids", at the New Mexico Institute of Mining and Technology, Socorro NM on June 7, 1988. The intention was to increase the ductility of the normally brittle metal by heating the liner to a high temperature by shock compaction during its acceleration just before jet formation.

The feasibility of increasing the ductility of tungsten in this way is the subject of the present study. The theory and prior experimental …

Experimental Investigation Of Collisional Properties Of Spheres, Laurent Labous

Theses

We present experimental results on the collisional properties of spheres obtained through high-speed video analysis. An apparatus is built that produces collisions of spheres of various sizes with a wide range of impact, velocities and incidence angles.

Edge detection techniques are implemented to track the position of the spheres from frame to frame whereby the translational velocities may be computed. In order to determine the rotational velocities, small markers are imprinted on the surfaces of the spheres and also tracked and matched from one frame to the next.. From the pre and post collision kinematic data, three collisional properties are …

Modeling Of Objects Using Planar Facets In Noisy Range Images, Girish Phansalkar

Theses

Products designed and manufactured before the advent of Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM) technology have not been documented electronically. To avoid the laborious procedure of redesigning the parts, a reverse engineering approach can be adopted. This approach involves, taking a picture of the object and constructing a solid model from the image data.

Range image is a three dimensional image of an object or a scene. This image can be obtained from special cameras, called range image cameras, or can be constructed from the Coordinate Measuring Machine's (CMM) output data. Adaptive Fuzzy c-Elliptotype (AFC) clustering algorithm …

Experimental Study Of The Rise Of A Large Sphere In A Vibrated Bed Of Monodisperse Spheres, Loic Vanel

Theses

As a simplified way to study size segregation mechanisms, the rise of a single large sphere in a vibrated bed of smaller monodisperse spheres is investigated. The time it takes for the ball to rise from the bottom of the bed to the surface is measured in a very wide range of vibration amplitude, frequency and acceleration. Rise regimes are identified and are classified according to the macroscopic behaviors displayed by the granular bed: heaping, convection without heaping and crystallization. The influence of the large sphere's size on the rise velocity is described. The scaling features of the vibration amplitude …

Two-Phase Flow In Microchannels, Roger Scott Stanley

Doctoral Dissertations

The purpose of this study was to investigate fluid mechanic and heat transfer characteristics of two-phase two-component flow in rectangular microchannels. Experiments were conducted using rectangular aluminum channels with hydraulic diameters ranging between 56 $\mu$m and 256 $\mu$m and aspect ratios which varied from 0.5 to 1.5. Both single- and two-phase tests were conducted using water and gaseous argon, helium, and nitrogen as the working fluids. The Reynolds number for both types of experiments ranged from approximately 50 to nearly 10,000. The Nusselt number ranged between 0.0002 and 70. The single- and two-phase experimental data were empirically correlated, using parameters …

Diophantine Type Fractional Derivative Representation Of Structural Hysteresis, Part Ii: Fitting, Computational Mechanics, Jerzy T. Sawicki, Joe Padovan

Mechanical Engineering Faculty Publications

Part I of this series introduced the diophantinized fractional model and the decompositional formulation. The various important properties of fractional continuum formulation and its decomposed version were developed. In Part II the dynamic properties of the diophantine representation are investigated. The model fitting scheme will be developed to handle an arbitrary frequency dependent structural hysteriesis. This is followed up with the results of benchmark studies which demonstrate the effectiveness of fitting.

A Design Of A Marine Radar Mast System For Minimum Vibration, Suey-Yueh Hu

Dissertations and Theses @ UNI

This experimental research focused on four areas: (a) the design of a new procedure for imitating the dynamic behavior of an electronic base plate on a radar mast system; (b) determination of a reasonable oscillation modal state; (c) avoidance of the destruction of the ability of the radar on the mast of a ship to receive and analyze incoming signals; and (d) design of a vibration absorber and vibration isolator based on an oscillation frequency. An adapted design for the vibration absorber and vibration isolator contributed to the prevention of excessive amplitude being produced by random forces acting upon a …

Nebraska Summary 280: Massey Ferguson 4370 And 4270 Diesel 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Tests 1684 & 1730: Zetor 7341 Super/Zetor 7321 Super Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1734: Case Ih 8910 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1733: John Deere 9420 24 Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Nebraska Summary: S306 Zetor 7341, Zetor 7321, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 1722: Caterpiller Challenger 75d Diesel 10-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1730: John Deere 9100 Powrsync Diesel 12 And 24-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1732: John Deere 9300 Powrsync Diesel 12 And 24-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1733: John Deere 9400 Powrsync Diesel 12 And 24-Speed Also John Deere 9420, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1735: Case Ih 8930 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1737: Case Ih 8950 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE

General

Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure.

The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …