Digital Commons Network^™

Physiographic Surfaces And Weathering Near Butte, Gordon B. Brox

Bachelors Theses and Reports, 1928 - 1970

Three cycles of erosion have modified the Boulder batholith. The earliest cycle produced a peneplaination that has been largely obliterated by a partially completed intermediate cycle, and the recent cycle now in progress.

An Investigation Of The Gallium-Indium Binary System, Allen D. Kennedy

Bachelors Theses and Reports, 1928 - 1970

Twenty-four alloys, at 5 weight per cent or smaller intervals, were investigated by the thermal method. Very low temperatures had to be attained, because most of the alloy melts supercooled remarkably. Analysis showed only a liquidus and solidus line, and the solidus temperature was the same for each alloy.

The Alloys Of Gallium And Indium, C. J. Adams

Bachelors Theses and Reports, 1928 - 1970

Thermal analysis VIPS used to construct cooling and heating curves from which the phase diagram was determined. The data for the entire set of cooling curves were obtained by the use of mercury thermo­meters.

Hot-Dip Aluminizing Of Low-Carbon Steels, Claude R. Barnes Jr.

Bachelors Theses and Reports, 1928 - 1970

In a relatively short period of sixty-five years, aluminum has grown to the rank of fifth in total weight of met­als produced in the world. Throughout its short life, aluminum has been found to have excellent corrosion-resistant properties; yet only in recent years has aluminum been under consideration as a corrosion-resistant coating for iron and steel.

The Electrolytic Polishing Of Steel In Solutions Of Sulphuric And Phosphoric Acids, Joseph W. Tripp

Bachelors Theses and Reports, 1928 - 1970

The process of cleaning and pickling the surfaces of steel objects by electrolytic methods has been known and applied since about 1920; the fact that under certain con­ditions these surfaces acquired a brilliant luster was noted as early as 1928.

An Isothermal Study Of An S.A.E. 6150 Steel, Tom Liss, C. Arentzen

Bachelors Theses and Reports, 1928 - 1970

The purpose of this thesis is to set forth the method followed, the laboratory procedure practiced, the results obtained, the conclu­sions drawn, and the recommendations proposed as a consequence of a metallographic study of the isothermal transformation of an S.A.E. 6150 steel.

Isothermal Transformation Of S.A.E. 6150 Steel By The Magnetic Permability Method, Richard R. Douglas

Bachelors Theses and Reports, 1928 - 1970

Since the purpose of this thesis is primarily to present an improved mechanical method for plotting isothermal transformations by means of differential mag­netic permeability between untransformed austenite and its ultimate transformation product.

A Preliminary Study Of The Benefication Of Montana Corundum, John L. Brown

Bachelors Theses and Reports, 1928 - 1970

The objective of this thesis was to affect an effic­ient and economical recovery of corundum. The corundum oc­curs as a crude ore admixed with quartz and other diluents. Yet, this material is a potential Montana resource of a val­uable non-metallic mineral. In view of the strategic import­ance and the relatively small production of this mineral in the United States, it seems advisable at this time in world affairs to investigate every possible source of this mineral.

The Renova "Syenite" Porphyry Madison County, Montana, James H. Clement

Bachelors Theses and Reports, 1928 - 1970

Unique feldspar porphyries, syenitic in appearance, and granitic in composition, form an unusually thick sill intrud­ing pre-Cambrian Belt graywacke about eight miles south of Whitehall in southwestern Montana. Commercial deposits of gold and silver ores occur nearby, and may possibly be genet­ically related to the porphyry, although direct association is not evident. The geologic age is believed to be late Cretaceous or early Tertiary, and the sill may be related to the Tobacco Root batholith.

A Study Of Some Pre-Cambrian Schists From Yankee Jim Canyon, Park County, Montana, Charles K. Presley

Bachelors Theses and Reports, 1928 - 1970

One of the most highly deformed metamorphic rock series in Montana is exposed fifteen miles north of Yellowstone Park, Wyoming in the great gorge known as Yankee Jim Canyon, which was formed by Yellowstone River at that point. These metamorphics are Pre-Cambrian in age, and are almost certainly sedimentary in origin, although the involved and intricate folding which they have undergone has long since obliterated any superficial traces of that origin.

The Lilly Mine Of Powell County, Montana, Wilbur Aikin

Bachelors Theses and Reports, 1928 - 1970

For many years the Elliston District, of Powell County has been a minor producer of gold, lead, zinc, and silver. Although never among the largest producing districts of the state, it has with the exception of the war years supplied a notable tonnage of ore to the neighboring mills ever since the first placer and lode claims were located there during the late eighteen hundreds.

Geology Of Smoke Hollow Area 8 Miles Southeast Of Deerlodge, Powell County, Montana, Floyd C. Bossard

Bachelors Theses and Reports, 1928 - 1970

This investigation was undertaken primarily as a problem in geologic mapping. The stratigraphy was studied as to the character, age, and sequence of the geologic formations that are exposed. The conclusions were based principally on the field relationships and lithology because no fossils were found.

Structure Of Southwestern Montana, Donald W. Levandowski

Bachelors Theses and Reports, 1928 - 1970

Intrusions of granitic rocks on a large scale are commonly found in the central part of folded mountain systems. Igneous rocks, intrusive and extrusive, are widespread in the mountains of southwestern Montana. An examination of the structural pattern of this area indicates that the fold trends form a radial pattern. How and why this pattern formed and its relation to the igneous activity in the area have not yet been discussed in the literature.

Basic Sills In Cottonwoood Creek Canyon, Jefferson County, Montana, Dale F. Kittel

Bachelors Theses and Reports, 1928 - 1970

A stratigraphic section of about 2600 feet of upper Beltian to lower Devonian formations exposed in Cottonwood Creek Canyon 11 miles east of Whitehall, Montana, contains about 20 igneous sills. These sills are from 5 to 20 feet thick, and grade from granogabbro to quartz basalt, except for one sill which is 165 feet thick, and is composed of granogabbro and red syenite. The whole sedimentary series is isoclinally folded, and the sills follow the bedding planes closely with localized crosscutting through the beds.

Was Assimilation Important In The Formation Of The Boulder Batholith?, Richard Marvin

Bachelors Theses and Reports, 1928 - 1970

Examination of a rock suite from the northern end of the Boulder batholith reveals that four of the eight criteria for assimilation as given by Grout are present. Thus, in the opinion of the writer, there is evidence and trends to signify assimilation, but no indication of the importance that it played in the formation of the Boulder batholith.

The Bighorn Mountains, The Little Rocky Mountains And The Bowdoin Dome Uplifts, E. J. O'Connell

Bachelors Theses and Reports, 1928 - 1970

The purpose of this paper is to secure an actual figure describing the amount of uplift in the Bighorn Mountains, the Little Rocky Mountains and the Bowdoin Dome. To the writer’s knowledge, the amount of uplift in the areas mentioned has not been determined before. Such a figure could be useful in structural studies of Montana and Wyoming, because the amount of uplift is a fair measure of the intensity of orogenic forces; also, the amount of uplift is a prerequisite to the determination of the amount of erosion.

An Investigation Into The Precipitation Of Copper From Mine Water By Cupric Copper Reduction, And The Subsequent Precipitation Of Copper As Cuprous Chloride, Jack T. Gentry

Bachelors Theses and Reports, 1928 - 1970

The objective of this thesis is to determine the possibility of applying a different method to the re­covery of the copper dissolved in the Butte mine waters, and thereby precipitate a purer cement copper with greater efficiency and less iron consumption.

Measurement Of Flotation Rate As A Function Of Particle Size, Thomas Martin Morris

Doctoral Dissertations

“The Problem. The rate of flotation of solid particles determines the percentage recovery of these particles which can be obtained during a given time interval. An examination of operating data from a flotation plant shows that percentage recovery varies with the size of particle.

Many investigators have explored the problem of measuring flotation rate. In most cases the results obtained were expressed qualitatively. The results obtained by one worker were often at variance with results reported by another worker.

This investigation was undertaken with the object of (1) quantitatively measuring the rate of flotation of various sizes of particles and …

The Volatility Of Metallic Sulfides And Their Treatment By Vacuum Metallurgy, Chi-Mei Hsiao

Doctoral Dissertations

"The purpose of this investigation is to determine the vapor pressure or volatility of the sulfides of the following metals by Langmuir's method: a) Zinc b) Cadmium c) Mercury d) Manganese e) Tin f) Lead g) Arsenic h) Antimony i) Molybdenum J) Iron k) Cobalt l) Nickel m) Copper n) Silver o) Calcium p) Aluminum.

The relation of this property to the position of the metals in the periodic table will be discussed, thus the vapor pressure or volatility of the remaining metals can be predicted as to the order of magnitude if the law of periodicity holds.

The possible …

The Nature Of Molecular Films Of Oleic Acid On Quartz, Kenneth Lee Keating

Masters Theses

"The purpose of this research was to show the nature of oleic acid on quartz mineral by transferring calcium oleate films, known to be monomolecular and of a definite orientation, to the surface of a piece of quartz, and measuring the resulting coated mineral by contact angle technique"--Introduction, page 1.

A Study Of Cast Eutectic Structures By Means Of Optical And X-Ray Microscopy, John Stanton Winston

Masters Theses

"The present research is the result of interest in two rather broad, and at first thought, seemingly entirely separate topics: the structure of eutectics and x-ray microscopy. D. Hanson in 1923 in his correspondence with Albert M. Portevin in regard to his article on the structure of eutectics states, "A point that always stuck him (D. Hanson) in examining eutectics was that one of the constituents always formed a continuous phase round the other one. The orientation of one constituent was either constant or varied in a uniform manner. What, however, was the condition of the 'enveloped' constituent, which formed …

An Experimental Study Of Crystallization In Opal Glass, William C. Rous

Masters Theses

"Opal glasses are well known from use in such forms as ointment jars, lighting globes, wall panelling [sic], and decorative effects in glass vases. Cryolite, fluorspar, and sodium fluosilicate are used in varying proportions in most glasses of this type. Since little is known of the mechanism of crystallization in opal glass, there is a definite need of gathering further information on this subject. This information is of particular interest to the manufacturers whose products consist of this type of glass. Further information would aid in control of the characteristics desired and perhaps would allow a more economical control"--Introduction, page …

Separation Of Copper And Zinc On Synthetic Resins, Ernest Joseph Breton

Masters Theses

"It was desired to know whether ion exchange resins could be of value to the metallurgist in the recovery and separation of metals. The recovery and separation of copper and zinc from dilute solutions on Amberlite IRC-50, a carboxylic resin, and Amberlite IR-120, a nuclear sulfonic resin, were investigated. It was found that Amberlite IRC-50 could effectively remove copper ions from a solution of copper and zinc. Amberlite IR-120, due to the strong sulfonic acid groups, exhibited only a slight preference for copper as compared to zinc. It would seem that a judicious choice of resins coupled with appropriate chemistry …

Solid Solution In The Series Sodium Tungsten Bronze, Lithium Tungsten Bronze And Tungstic Oxide, Godrej F. Doctor

Masters Theses

"The tungsten bronzes are a series of anionic substitutional solid solutions of alkali metal metatungstates and tungstic oxide. They are neither alloys nor intermetallic compounds, the term tungsten bronzes was adopted because of their remarkable metallic properties, e.g. luster, specific gravity and especially high electrical conductivity, which resembles to that of graphite. Due to its chemical inactivity and beautiful shades of color, it is used as a coating, especially in the plastic industry and for other ornamental products. The properties and the structure of these bronzes have not been investigated entirely satisfactory; within the last twenty years, only a few …

The Potassium Tungsten Bronzes, Ching Hou Ma

Masters Theses

"The tungsten bronzes are a series of substitutional solid solutions of alkali or alkaline earth metatungstates and tungstic oxides. They are not really metallic alloys or intermetallic compounds but they possess some marked metallic properties such as metallic luster, good electric conductivity, high specific gravity, etc. For this reason the name of "bronzes" is applied to them"--Introduction, page 1.

The Transformation Of The Aluminum-Zinc Eutectoid Alloy At Subcritical Temperatures, Thomas Joseph Burke

Masters Theses

"Interest in the mechanism of the austenite eutectoid transformation in iron-carbon alloys, especially as produced by the isothermal sub-critical techniques introduced by Davenport and Bain, has resulted in the application of similar heat treatment studies to the eutectoid transformations in other alloy systems. The study of the eutectoid transformation is of both fundamental and industrial interest because past experience has shown that these studies yielded much information concerning the nature and mechanism of the changes in eutectoid alloys during the decomposition of the phase stable at high temperatures and has also contributed much toward the development of new properties to …

Development, Application And Operating Results Of The Center Peripheral Discharge Rod Mill, David Porter Hale

Professional Degree Theses

"The use of a rod mill for producing manufactured sand is not a recent application. A Marcy Open End Rod Mill has been operating at the plant of the Sun Sand Company, Thayer, West Virginia, since 1925. In early 1940 an 8' x 12' rod mill of the open end type was installed at Shasta. Dam, near Redding, California for sand production. In 1942 work began on Fontana Dam, a Tennessee Valley Authority Project on the Little Tennessee River. The flow sheet included two 9' x 12' high discharge rod mills driven by a single 800 H.P. motor. All of …

A Study Of Missouri Flint Clay, Edmond Preston Hyatt

Masters Theses

"The problem is one of attempting to explain the peculiar nature of Missouri Flint Clay and to expand the knowledge concerning it. Among the questions for which answers are sought are: What makes Missouri Flint Clay so hard? What happens to Missouri Flint Clay when it is ground? What is the mineralogical constitution of Missouri Flint clay?"--Introduction, The Problem, page 1.

Separation Of Cobalt From Zinc Sulfate Solutions By Synthetic Cation Exchange Resins, Wen-Hsiang Chang

Masters Theses

"The purpose of the present research is primarily to investigate the possibility of the separation and recovery of cobalt from zinc sulfate solutions by means of cation exchange resins. It is thought that such an investigation, seemingly of academic interest, might throw some light on determining the possibility of processing some industrial solutions containing both cobalt and zinc. Cobalt, for instance, has been well known as one of the most detrimental impurities in zinc electrolytic solutions. In spite of various purification treatments, small amounts of cobalt are often present in the electrolytic solution, causing a reduction in current efficiency and …

Construction And Operation Of A Vacuum Retort Pilot-Plant For Distillation Of Alloys, Robert Frederick Doelling

Masters Theses

"The widespread appearance of large scale vacuum systems operating commercially in the micron range of pressures has initiated a new field of industrial endeavor, vacuum engineering. The ever increasing number of applications of vacuo in commercial processes and laboratory research has stimulated the design and improvement of vacuum equipment, and at the present time equipment may be obtained to meet practically any need. In turn, the variety of available tools has directed the engineers attention to improving old processes and developing new ones through the utilization of vacuum techniques ... The possibility of producing a relatively high purity silver in …