Digital Commons Network^™

Aligning Aviation Safety Reporting System Anomaly Codes For Crew Communication And Coordination With Human Factors Taxonomies, Jennifer Rose Herr

Doctoral Dissertations and Master's Theses

This study addresses the lack of theoretical grounding and definitions for the Aviation Safety Reporting System (ASRS) anomaly codes, particularly those related to pilot communication and coordination errors. To improve the conceptual consistency and analytical usability of ASRS data, the research developed a framework that maps ASRS codes to three established theory-based human factors taxonomies: the Human Factors Analysis and Classification System (HFACS), Threat and Error Management (TEM), and Aviation Causal Contributors for Error Reporting Systems (ACCERS). The study used qualitative text mining to systematically code communication and coordination errors submitted by Part 121 pilots for a stratified sample of …

Active Measurement Of A Micron-Order Gap Under High-Speed And High-Temperature Conditions, Andrew Becker

Doctoral Dissertations and Master's Theses

The hypersonic regime poses numerous challenges that researchers face in the development of hypersonic flight vehicles. Due to their excellent thermomechanical properties, ultra-high-temperature ceramics (UHTCs) have risen as a promising solution to act as a protective barrier between the harsh environment and surface materials of these flight bodies. The mechanical operation of a portable hypersonic simulation device was developed in-house and tested at Argonne National Laboratories (ANL) to gather in-situ material response of prospective UHTC samples when exposed to a hypersonic regime. An edge detection-based algorithm was developed and used in LabVIEW to monitor the health and operation of the …

Monte Carlo Simulation Models To Enhance Air Cargo Network Resilience And Sustainability, Shereen Marie Hashemi

Doctoral Dissertations and Master's Theses

This dissertation focuses on developing and validating an empirical set of simulation models for an air cargo network under large-scale disruption to test recovery strategies that improve resilience. Understanding and quantifying network resilience and recovery strategies is critical for ensuring sustainable operations. These operations become essential during disruptive events as air cargo is used to transport time-sensitive and critical goods. The collective research steps result in a Monte Carlo simulation framework to evaluate air cargo network resilience and identify strategies that enhance performance during disruptions.

The modeled system is a hub-and-spoke network centered on Memphis (MEM) with 23 domestic airports …

Compost Grinder For The University Of South Carolina Office Of Sustainability, Rori E. Pumphrey, Grace Yaegel, Aaron R. Sawyer, Bradley White

Senior Theses

This project originates from a collaboration with the USC Office of Sustainability, which seeks to improve the handling and processing of food waste generated on campus. The primary challenge is the difficulty in composting certain types of food waste, such as avocado pits, pumpkin rinds, and other dense or fibrous organic materials that are not easily broken down using conventional methods. Existing commercial solutions are often too large and expensive, or electrically powered, and are thus not well suited for the volume or nature of USC's food waste. To address these limitations, our team designed a manually operated food waste …

Validation And Trend Analysis Of Satellite-Derived Surface Water Temperature Observations Over Adirondack Lakes, Marzi Azarderakhsh, Carolien Mossel, Abdou Rachid Bah, Aisha Malik, Fahmeda Khanom, Jonathan Borrelli, Pete Mcintyre, Hamidreza Norouzi, Kevin Rose

Publications and Research

This study aims to validate and evaluate satellite remote sensing observations from the Landsat series over 135 lakes in the Adirondack State Park, located in upstate New York, and to examine their surface temperature trends over the past 40 years. It utilizes data from the Moderate Resolution Imaging Spectroradiometer (MODIS), along with Landsat 5 and 7. Park-scale results were derived by extracting MODIS surface temperatures within the park boundary, while lake-scale results were estimated using Landsat 5 (1984-2012) and Landsat 7 (1999-2023) observations. In addition, field observations were utilized to perform a comprehensive validation and evaluation of satellite-based surface temperature …

Aminated Phenolated Lignin For Effective Anionic Dye Removal For Water Remediation, David Chem, Samantha Glidewell, Fatema Tarannum, Keisha B. Walters

Chemical Engineering Faculty Publications and Presentations

Lignin, a renewable biopolymer sourced from plant cell walls, is gaining attention due to its extensive availability from natural resources, native functional groups, low cost, and biodegradability in various applications. In recent years, lignin and its derivatives have been utilized as adsorbents, flocculants, and sterilants in a broad range of applications, including wastewater treatment and sustainable packaging. The growing global demand for clean water-driven by rapid industrialization, urban expansion, and agricultural intensification-has made effective wastewater treatment a pressing environmental priority. In this effort, a dual-functionalization strategy to transform raw lignin into a high-performance adsorbent for the removal of hazardous anionic …

Electrode Engineering To Minimize Degradation In Lithium-Sulfur Batteries, Saheed Adewale Lateef

Theses and Dissertations

Lithium-Sulfur (Li-S) batteries have recently received significant attention as a potential candidate for next-generation energy storage technology. This is due to its high theoretical capacity (1675 mAh/g) which can provide theoretical energy density of 2500 Wh/kg as compared to 400 Wh/kg of the current Lithium-ion batteries. Moreover, the earth-abundant sulfur element as well as its environmental friendliness endows unique advantages on the cost and environmental impact. However, there are several roadblocks that need to be addressed for commercial adoption of Li-S batteries, such as: (i) poor conductivity of sulfur and its discharged product; (ii) solubility of lithium polysulfides and their …

Threshold Symmetric-Key Encryption For Tabular Data, Subhendu Pramanick

Master’s Dissertations

Abstract Through the distribution of secret key information among several parties, threshold cryptography improves the security of cryptographic systems by preventing any one entity from possessing the entire secret key and requiring a threshold number of participants to carry out cryptographic operations. This paradigm not only mitigates single points of failure but also ensures fault tolerance in the presence of compromised or unavailable parties. The Distributed Symmetric-key Encryption (DiSE) framework, introduced by Agrawal et al., realizes Threshold Symmetric-key Encryption (TSE) by requiring interactive participation from a threshold subset of servers for each encryption or decryption operation. While DiSE and similar …

Melting Behavior Of Direct Reduced Iron Pellets With Different Carbon Content In Molten Steel And Molten Slag, Fabian Andres Calderon Hurtado, Joseph Govro, Arezoo Emdadi, Ronald J. O'Malley

Materials Science and Engineering Faculty Research & Creative Works

This study investigates the melting behavior of direct reduced iron (DRI) pellets in molten slag and steel baths, focusing on how the carbon content influences the melting rate through the stirring effects of gas evolution on heat transfer. A computational model using COMSOL Multiphysics 6.1 is developed to simulate the temperature profile at the pellet's core and the gas evolution resulting from the reaction between FeO and carbon within the pellet. The model is validated using experimental data from this study as well as literature on the DRI pellet–molten slag system. Results indicate that, despite the increased enthalpy demand associated …

0894: G. W. “Jerry” Sutphin River Transportation Collection, 1832-2024, Marshall University Special Collections

Guides to Manuscript Collections

Gerald W. “Jerry” Sutphin was a nationally recognized river historian from Huntington. He graduated from Mullens High School and Marshall University and became an army officer. Sutphin worked for and retired from the United States Army Corps of Engineers before spending twenty years operating his own business, Visual Information Ltd. The author of Sternwheelers on the Great Kanawha River, he also wrote a number of articles and contributed to numerous publications with words and/or photographs. Sutphin provided historical presentations on the Delta Queen and other large sternwheel excursion boats and served as a consultant for several documentaries and exhibits. Sutphin …

Mems 4110: Improving Restaurant Efficiency: Automatic Egg Peeler, Shanice Isimbi Mutabazi, Kyle Bryant Okui, Max Ari Siefert, Lani Fancesca Espinel

Mechanical Engineering Design Project Class

Neon Greens is a salad restaurant in St. Louis, MO that focuses on serving fresh, locally sourced ingredients. One of their signature menu items includes soft and hard-boiled eggs, which are used in large quantities every day. Currently, these eggs are peeled by hand, which can be slow, inconsistent, and difficult to keep up with during busy hours. Because of this, Neon Greens needs a faster and more reliable way to peel eggs without increasing labor. Our project aims to design a device that can peel eggs automatically, reduce prep time, and stay safe and easy to clean in a …

The Effect Of Fascicular Elastin On The Mechanical And Functional Properties Of Healthy, Damaged, And Healing Tendon, Shawn Pavey

McKelvey School of Engineering Graduate Student Theses & Dissertations

Mechanical properties of tendon are highly influenced by structural protein composition and microscopic sub-structures. Within the largest subunit of tendon, the fascicle, the role of the elastin protein remains understudied despite impressive extensibility and fatigue resistance of its resulting elastic fibers. While previous work catalogued contributions of fascicular elastin across tendon type and species, the anticipated effects of elastin in fatigue and healing have not yet been explored. While previous knockout mouse models showed that disruption of elastic fibers led to altered mechanical properties (e.g., increased linear modulus), these models depended on heterozygous elastin deficiency or indirect knockout of proteins …

Mems 4110: Asme Challenge, Jon Cossman, Jonathan Young, Nate Nowel

Mechanical Engineering Design Project Class

The goal of this project was to design and assemble a remote controlled device for a competition that can maneuver through a course, collect trash units from 3D-printed trash bins, and bring them to a receptacle at the end of the course. Important factors to consider in the design involved ensuring it followed traffic laws through the course, making sure it could operate multiple times, and fit within price and space constraints. Prototypes were tested against the ability to deliver 75 percent of trash units within 5 minutes, 50 percent of trash units within 5 minutes without any traffic violations, …

Mems 4110: Egg Peeler Group L1, Brian Hau, Alex Kenn Lee, Aisha Bah, Shanaelle Nabatmama

Mechanical Engineering Design Project Class

Neon Greens is a quick-serve salad concept located in St. Louis, MO. Part hydroponic farm and
part restaurant, they focus on growing a majority of their greens in-house, and emphasize
transparency in food systems.
In recent months, they added a ‘Protein Caesar’ salad to the menu. That salad features two
‘jammy’ boiled eggs which are cut in half. Staff at Neon Greens steam eggs precisely in their
Combi oven and shock them to stop the cooking process. They then peel those eggs by hand.
On some days, they must process >100 eggs, which can take up to 1.5 hours of …

Mems 4110: Interactive Racecar Dynamics Exhibit, Leonardo Gomes, Hunter Rocker, Joseph Norris, Jack Coode

Mechanical Engineering Design Project Class

Visitors at science museums often struggle to understand how launch speed, lane choice, and banked-curve dynamics influence a car’s trajectory. Existing educational exhibits rarely provide repeatable measurements or clear physics demonstrations. This project addresses that gap by creating an interactive racecar dynamics exhibit with a controlled launcher, 3D-printed banked track geometry, and optical timing gates. The goal is to give users measurable feedback on velocity, lane behavior, and motion through a 31° banked turn while maintaining safety, durability, and fast reset time for continuous hands-on learning.

Mems 4110: Rapid Drink Chiller, Aidan F. Moriarty, John Babineau, Levi Gingerich, Quinn Close

Mechanical Engineering Design Project Class

The purpose of this document is to outline the purpose and function of the rapid drink chiller device. This device is designed to replace traditional portable drink cooling methods, such as traditional styrofoam coolers, fridges, etc. Traditional methods require the transport and inclusion of ice, and require overly long cooling times, with the exception traditional fridges which are non-portable. The rapid drink chiller is designed to be light and compact in order to maximize transportability, accomplished via an all foam insulation construction around a waterproof box. The box is filled with a water-ethanol solution which is cooled to extremely low …

Mems 4110: Dbf Banner, Pachie Ackerman-Bennett, Joshua Paul Laue, Nazifa Younus

Mechanical Engineering Design Project Class

The DBFBanner is a project made for the WashU Design / Build / Fly club. After interviewing DBF club president Sarah Donner, we interpreted the club’s needs as: (1) a banner that could achieve vertical stability in flight; (2) the banner could deploy and release remotely; (3) the banner and associated components were as light as possible. We went through several design iterations, including mathematical and CAD models, mockups, prototypes, and testing apparatus. Many designs were considered, including designs based on linear motion and collapsible trusses. We arrived at a design that used a servo motor to rotate a 3D-printed …

Mems 4110: Precise Water Distribution System, Morelia R. Reyes-Perez, Jp Torack, Jakob Ayala

Mechanical Engineering Design Project Class

This project focuses on designing and prototyping an automatic precise watering system to support plant research conducted in the Washington University greenhouse. The customer, graduate student Christina Youngpeter, needs a reliable method for delivering accurately measured water volumes to individual plants as part of a study on hydration effects. Manual watering can be time consuming, our system will provide a programmable, repeatable, and low maintenance solution.

Mems 4110: Asme Waste Collection Challenge, Leslie Alfaro, Cathy Zhao, Bari Diamond, Obike Anwisye

Mechanical Engineering Design Project Class

For this project, our goal was to design and build a remote-controlled wastecollection robot that could pick up trash bins and deliver their contents to a dumpsite while staying within the strict rules of the ASME challenge. The robot had to fit inside a 50 cm cube, drive through six-inch lanes, follow traffic rules, and be fully controlled by a six-channel RC controller. These constraints shaped almost every decision we made throughout the design process.

Mems 4110: N1 Precise Water Distribution System, Lillian Salter, Ye Huang, Elaine Wang, Joy Luo

Mechanical Engineering Design Project Class

The aim of the project is to construct a precise water distribution system for anthropology graduate student Christina Youngpeter, who is studying the impact of hydration levels on the growth of quinoa plants. As her experiment grows in scale, she increasingly needs a system that can measure and distribute water for her, saving hours otherwise spent meticulously measuring water for 36 plants and counting. The system must measure water accurately and distribute it to the plants cleanly and efficiently. It should also be scalable and autonomous, requiring minimal human intervention.

Mems 4110: The Egg Peeler, Susanna Yeh, Jessica Arnold, Peter Nesin, Finn Mcnamee

Mechanical Engineering Design Project Class

The purpose of this project is to assist the customer Neon Greens in accelerating their food preparation time by designing an egg peeler device. To have a better understanding of the customer needs and expectations, the design team participated in an interview with Neon Greens to address their vision and desires for this device. For the semester-long project, the team underwent various prototype stages, including the proof of concept, the initial prototype, and the final prototype. Our final design consists of a hopper that holds a batch of eggs on top and drops two eggs at a time, one on …

Mems 4110: Dbf Deployable Banner, Julia Peppe, Danny Bruns, Sarah Donner, Michael Safier

Mechanical Engineering Design Project Class

Create a device that stores a banner in an RC aircraft that can be remotely deployed to be towed and released upon command.

Mems 4110: Air Cannon Launcher Demo, Jackson Strauss, Avery Cohen, Wilson Gao, Jack Galloway

Mechanical Engineering Design Project Class

For our senior design class (MEMS 4110) at Washington University in St. Louis, we were tasked with creating a demonstration for the St. Louis Science Center that demonstrated an engineering principle or concept. The Science Center functions as a science-oriented museum and saw more than 600,000 visitors in 2024. For our demonstration, we wanted to showcase the principles of kinematic motion. Kinematic motion is study of the motion of objects without considering applied forces. Additionally, when the acceleration of an object is either zero or held constant, the trajectory path that the object follows can be described by a few …

Mems 4110: Trash-E (Terrain-Adaptive Remote Autonomous Sanitation Hauling Engineer), Jackson R. Weisbard, Raza Rabbani, Dhruv Goel, Kj Kernan

Mechanical Engineering Design Project Class

The TRASH-E (Terrain-Adaptive Remote Autonomous Sanitation Hauling Engineer) project was created to compete in the 2025 ASME Student Design Challenge. For 2025, the ASME SDC asked for the development of a remotecontrolled robot that could collect and deposit trash from receptacles placed around a miniature city. The robot had to adhere to specific size and weight constraints, as well as obey traffic laws in the same manner as a real driver operating a motor vehicle.

Mems 4110: Parachute Snatch Force Tester, Adam Mallalieu, Ethan Riak, Jackson Shurman, Ryan Schmadtke

Mechanical Engineering Design Project Class

This report discusses the design, development, and testing of a parachute snatch force tester for MEMS 411 Senior Design. The device is for the WURocketry Team, and aims to measure the peak force exerted on the rocket bulkhead during parachute ejection. This peak force is known as the snatch force, and is incredibly important when it comes to maintaining safety, improving performance, and material selection during the rocket’s production process. Current methods for testing and recording this snatch force are limited, so our team aimed to create a simple and cost effective solution. Our design utilizes a vertical support that …

Mems 4110: Arduino-Controlled Precise Water Distribution System, Jack M. Williams, Joe Sieracki, Nina Woodward

Mechanical Engineering Design Project Class

Christina Youngepeter is a Graduate Student of Archaeology at Washington University in St. Louis. She is studying an ancient plant that fell out of use after 1400 CE, whose ideal watering conditions are lost to time. To better characterize the plant, Christina is running an experiment to determine the ideal watering conditions for plant development. This involves watering sets of the plant with different volumes of water twice a day. The different volumes of water received by the groups of plants are 933 mL, 833 mL, 733 mL, 617 mL, 517 mL, and 417 mL. The acceptable percent error in …

Mems 4110: Asme Waste Collection Challenge, Theo A. Mass, Grant Kaplan, Emanoeel Ghabrial, Joseph Gillett

Mechanical Engineering Design Project Class

The Efficient Jolley Trash Grabber (EJTG) is a teleoperated vehicle adherent to the modified rules of the 2025-26 ASME Student Design Competition, hosted in MEMS 4110: Mechanical Engineering Design Project. The vehicle design was informed first by understanding the problem of waste collection. Patents, existing devices, user needs, and relevant codes and standards were reviewed to survey potential design approaches. The concept for the vehicle was generated by setting functionality, and brainstorming solutions to accomplish each goal. A mock-up vehicle was created using available materials, and four complete concepts were drawn each with a different design. Rigorous methods were used …

Mems 4110: Asme Waste Collection Challenge, Evelyn Madrigal, Letty Patino, Bing Ling, Michael Avaliani

Mechanical Engineering Design Project Class

Make a remote-controlled vehicle that can traverse the course below (obeying traffic laws), collect garbage units from collection bins and deliver the garbage units to a receptacle.

Mems 4110: Egg Project, Rebecca Leighann Boone, Courtney Davis, Bebel Trani

Mechanical Engineering Design Project Class

Peeling hard-boiled eggs by hand is a time-consuming and tedious task that often results in dimples and cracks in the final product. Many chefs and home cooks have tried techniques, from boiling the eggs in baking soda to slipping off egg shells using a spoon, to perfect the peeling process. However, these attempts often fall short by either altering the taste of the egg or extending the amount of time and labor. In the restaurant business, having employees peel eggs for long periods of time is costly. The local St. Louis salad restaurant, Neon Greens, is selling a new protein-dense …

Mems 4110: Conservation Of Angular Momentum Demo, Matthew Brouillet, Iyanu Akinyemi, Mingxuan Bi, Matthew Gimbel

Mechanical Engineering Design Project Class

A demo was built to serve as a hands-on experience for reinforcing concepts behind the conservation of angular momentum.