Digital Commons Network^™

Assessing Marpol Annex V Port Reception Facilities Of The National Port Of Liberia (Freeport Of Monrovia), Barbara Wade Cummings

World Maritime University Dissertations

No abstract provided.

Development Of Fire Prediction And Prevention Digital System Algorithms, Oybek Zokirovich Koraboshev

Chemical Technology, Control and Management

This research work is devoted to the development of algorithms for a digital system aimed at early detection, prediction and prevention of fire hazards. In the work, the process of fire hazard assessment is modeled on the basis of modern information technologies and artificial intelligence tools. The main focus is on collecting data in real time, analyzing it and creating algorithms that determine the level of danger. In the process of research, methods of data cleaning, normalization and determination of correlation between variables were used to process multidimensional data streams obtained from various sensors (temperature, smoke, gas concentration and humidity …

Investigation Of The Fuel Combustion Process In Gas-Fired Furnaces For Automation Systems, N.R. Yusupbekov, Sh.M. Gulyamov, A.T. Rajabov, U.U. Kholmanov

Chemical Technology, Control and Management

The regularities of the combustion process of gaseous fuel in chamber furnaces are described. This process represents a homogeneous reaction in which there is no distinct boundary surface between the fuel and the oxidizer. It is shown that the latter either mix and then burn subsequently, or both processes occur simultaneously, corresponding respectively to kinetic and diffusion combustion. The structure of a turbulent-diffusion flame of gaseous fuel combustion is presented.

Analysis Of A Cloud-Based Robot Motion Planning System, Yusif Mardanzade, Latafat Abbas Gardashova

Chemical Technology, Control and Management

As a result of the integration of cloud computing technologies into the field of robotics, the concept of "cloud robotics" has emerged. Unlike traditional robots, cloud-based robot systems remove computation, memory, and even some software from the local device and rely on remote resources obtained over the network. This approach ensures that robots are not limited only by their internal computing capabilities and allows them to take advantage of the wide range of opportunities offered by the cloud infrastructure. As a result, robots have access to large databases, highly parallel computing, and collective learning capabilities anytime and anywhere. In addition, …

Intelligent Decision-Making Systems In Smart Greenhouses, Muso Berdiyor Ugli Allanov

Chemical Technology, Control and Management

Smart greenhouses offer a solution to sustainable food production under climate uncertainty, yet their management often depends on fixed rules or human intuition. This study proposes an intelligent decision-making framework that integrates optimization, simulation, and a neural set into a self-learning system. By generating “conditionally real data” through simulation and evolutionary algorithms, the system can predict microclimatic changes and optimize control of water, energy, and nutrients. Continuous digital feedback enables adaptive, data-efficient operation even with limited real data. Experimental results demonstrate reduced resource use and improved yield stability, advancing the development of autonomous and resilient greenhouse ecosystems.

The Use Of Diagnostic And Restructuring Methods To Build Reliable Management Systems, Khurshid Salim Ugli Turayev

Chemical Technology, Control and Management

This article is devoted to the applied analysis of diagnostic and restructuring methods aimed at ensuring the reliability of control systems in the event of failures. The paper considers practical implementations of diagnostic and control algorithms using a servo drive setup as an example. The results of experiments are presented, demonstrating the system's behavior under various fault conditions. A comparative analysis of the effectiveness of the proposed solutions is carried out in terms of stability and operational accuracy. The obtained data confirm the feasibility of using adaptive control structures to increase the fault tolerance of technical systems. The article concludes …

Living Shoreline Prioritization And Hydrodynamic Habitat Suitability Models For Restoration In The Indian River Lagoon And Lake Worth Lagoon, Florida, Kelly M. Kibler, Melinda J. Donnelly, Vincent Encomio, Madison Giuntoli, Manisha Thenuwara, Brice Bennett, Laura Andrade Barron, Mariam Sonbol, Wynter Raine Seppala, Namritha Ramakrishnan, Jennifer Jordan Báez, Beth Orlando, Irene Arpayoglou, Melissa Meisenburg

Indian River Lagoon Shorelines

The spatial dataset: UCF_shorelinemodel_IRL_LWL.shp, was created with support from the Indian River Lagoon National Estuaries Program and Florida Sea Grant. These projects cumulatively led to creation of a living shoreline restoration prioritization model and hydrodynamic habitat suitability models for 1,550 km (963 miles) of estuarine shorelines in Indian River Lagoon and Lake Worth Lagoon.

The dataset presented herein includes:

1. shoreline data from >15,000 transects collected in the field,
2. shoreline wave climate data created through hydrodynamic modeling and frequency analysis of historic data,
3. categorization of potential risk for shoreline boat wake impact,
4. persistence of seagrass within 210 m of the shoreline, …

Advancing Transportation Decarbonization Through Electrification: Insights From Transit And Rideshare Scenarios, Ajay Ghimire

Theses (2016-Present)

The transportation sector remains a major source of criteria pollutants globally, with passenger vehicles contributing significantly to energy demand. While electric vehicles (EVs) offer a promising path toward energy efficiency, few studies have evaluated their impact at the metropolitan scale using integrated, high-fidelity modeling frameworks. This study investigates the energy implications of rideshare electrification in the Houston metropolitan area using a multi-stage simulation workflow. Travel demand is modeled using POLARIS, an agent-based, activity-based framework; vehicle trajectories are translated into second-by-second speed profiles using SVTrip; and energy consumption and criteria pollutant emissions are estimated using the Autonomie vehicle simulation platform. The …

Harvesting Aav By Tangential Flow Filtration Using Reverse Asymmetric Membranes, Xiaolei Hao, Ronny Horax, Xianghong Qian, April Wheeler, Hironobu Shirataki, Sumith Ranil Wickramasinghe

Chemical Engineering Faculty Publications and Presentations

Efficient bioreactor clarification for harvesting virus particles is often challenging. Tangential flow filtration is attractive as it can be easily adapted for batch and perfusion operations. Here the feasibility of using reverse asymmetric hollow fiber membranes, where the more open support structure faces the feed stream, has been investigated for harvesting adeno associated virus serotype 2. The open support structure of these membranes stabilizes a secondary membrane consisting of rejected particulate matter. It is essential that the stabilized secondary membrane remains highly permeable. Flux stepping experiments were conducted in total recycle mode in order to determine the critical flux. The …

Towards Automated And Explainable Insider Threat Response In Electronic Health Records: A Role-Aware Machine Learning Framework, Luca Lippi Ornstil

Master's Theses

Healthcare remains a prime target for cyberattacks, with insider misuse and credential compromise posing major risks to Electronic Health Records (EHRs). This thesis introduces a role-aware, explainable anomaly detection and response framework integrated with OpenEMR to address post-authentication threats. Four models—Local Outlier Factor (LOF), Isolation Forest, Autoencoder, and Graph Neural Network (GNN)—detect behavioral deviations across temporal, device, and role-based features, with LOF serving as the primary runtime detector. A configurable policy engine maps anomaly severity to proportional actions, from email alerts to read-only restrictions or account suspension, all reversible and auditable. Evaluation on real EHR logs shows the system’s operational …

Experimental Investigation: Performance Of Ranque–Hilsch Vortex Tubes Under Various Surface Boundary Conditions, Ahmad Al-Najjar

Theses

The Ranque–Hilsch vortex tube (RHVT) is a passive thermofluid device that splits compressed gas into simultaneous cold and hot streams through strong swirling flow inside a slender tube, without moving parts. This study experimentally examines how external boundary conditions applied to the tube wall influence RHVT performance. Three wall conditions were imposed: (i) externally cooled (cooling), (ii) externally heated (heating), and (iii) adiabatic (insulated). Tests were conducted with air over an inlet pressure range of 2–6 bar. The primary objective was to understand the extent to which wall thermal condition modifies temperature separation and energy efficiency. Performance was quantified using …

Universal Crackling Noise Links Plasticity In Nanoindentation With Compression In Metallic Glasses, Jordan Sickle, Wesley H. Higgins, Kerry A. Baker, Mayisha Nakib, Xiaojun Gu, George M. Pharr, Wendelin Wright, Karin A. Dahmen

Faculty Journal Articles

For decades, compression tests have been a standard method for identifying materials properties. However, these tests are slow, destructive, and require fabricating multiple potentially expensive bulk samples. Nanoindentation is fast, almost non-destructive, and requires only a single sample, to which large numbers of indents can be applied. Furthermore, nanoindentation is widely applicable, even to materials that are too brittle for traditional compression tests. Here, we show that nanoindentation is sufficient for extracting much of the same information that is measured in traditional sample compression tests in metallic glasses. The dynamics and statistics of the plasticity of two types of metallic …

Pricing Strategies In Global Channels: Considering The Effects Of Parallel Trade, Yuan-Mao Kao, Yang Yang, Shih-Fen Cheng, Cheng-Hung Wu

Research Collection School Of Computing and Information Systems

Pricing a global product differently across multiple regions is a common but controversial practice. Although price differentiation helps capture unique market characteristics, it also encourages parallel trade, which may affect the overall corporate performance of a global company. We study this problem with a single global business unit (GBU) and multiple local business units (LBUs). The GBU manufactures a product and sets a transfer price for supplying the product to all LBUs, and LBUs decide retail prices for their respective regional markets. Customers can purchase products in any region by comparing LBUs’ prices and other parallel-imported factors, and we construct …

Development And Characterization Of Sustainable Aluminum Metal Matrix Composites With Date Palm Agro-Residues As Reinforcement, Ansar Kareem

Dissertations

Aluminum Matrix Composites (AMCs) are extensively used in various industrial applications owing to their exceptional mechanical, material, and tribological properties. This led to the development of AMCs with every possible aluminum alloy as matrix, incorporated with various reinforcement materials to achieve desired material properties. There has been an increasing trend in the utilization of agricultural and industrial waste products as reinforcement material in AMCs. Date palm trees produce huge quantity of agricultural waste in different forms. Usually, these wastes are burned or disposed of in landfills which cause environmental pollution. Date palm agro-wastes can be incinerated to produce date palm …

Cal Poly (Cp) Legged Robot, Sebastian Barboza, Jonathan Mchale, Isabella Sorensen, Isaac Golan

Mechanical Engineering

The Navy spends $60 billion annually on dangerous ship maintenance performed by sailors. To save lives and resources, the Naval Surface Warfare Center (NSWC) is looking for robots to replace sailors and navigate ships to perform various tasks. Robots with tracks and wheels have been most recently explored by NSWC, however they have encountered significant problems navigating the ships, especially through naval ship doorways with a significant ledge. By using a legged robot, our team hopes to solve these problems and have a robot that can navigate the ship with relative ease and stability.

Wind Farm Dynamics Over A Diurnal Cycle: Analysis Of A Comprehensive Large-Eddy Simulation, Web-Services Accessible Dataset, Shuolin Xiao, Xiaowei Zhu, Ghanesh Narasimhan, Dennice F. Gayme, Charles Meneveau

Mechanical and Materials Engineering Faculty Publications and Presentations

The atmospheric boundary layer undergoes significant changes throughout a diurnal cycle, affecting wind turbine performance and wakes in wind farms. Wind farm large-eddy simulations (LES) under such conditions provide rich datasets to study the underlying dynamics and identify important trends. Here, we describe a comprehensive open dataset generated using LES of an eight-turbine wind farm consisting of four rows of two turbines. To avoid specifying either prescribed surface temperature or heat flux, a local one-dimensional soil heat conduction model is used with time-periodic solar surface heating, coupled to LES. After several days of low-resolution LES, an approximately time-periodic behavior is …

Patient-Informed Fluid-Structure Interaction Simulations Of Bicuspid Aortic Valve In Young Adults Reveal Regionalized Differences In Mechanical Stress, Hail B. Kazik, Harkamaljot S. Kandail, Joy Lincoln, John F. Ladisa

Biomedical Engineering Faculty Research and Publications

Bicuspid aortic valve (BAV) is a common congenital cardiovascular defect characterized by two, rather than three, cusps. Many BAV patients prematurely develop calcification and aortic stenosis by age 35, which is more severe with fusion of the right and noncoronary (RC/NC) cusps. The mechanisms underlying calcification observed within the coaptation, attachment, and fusion regions of BAV patients are unknown. While abnormal mechanical stimuli induced by the bicuspid anatomy likely plays a role, little is known about regionalized mechanical stimuli in these susceptible cusp regions of young patients prior to calcification. Strongly coupled fluid-structure interaction simulations were conducted using physiologic boundary …

Strategies For Increasing Methane Removal In Methanotroph Stirred-Tank Reactors For The Production Of Ectoine, Jaden Storrer, Tansley M. Mazurkiewicz, Bodee Hancock, Ronald C. Sims

Biological Engineering Student Research

Methane is a potent greenhouse gas that requires its emissions to be mitigated. A significant source for methane emissions is in the form of the biogas that is produced from anaerobic digestion in wastewater reclamation and landfill facilities. Biogas has a high valorization potential in the form of its bioconversion into ectoines, an active ingredient in skin care products, by halotolerant alkaliphilic methanotrophs. Cultures of Methylotuvimicrobium alcaliphilum 20Z were grown in bench scale stirred-tank reactors to determine factors to improve methane uptake and removal. Tangential flow filtration was also implemented for a bio-milking method to recover ectoine from culture media. …

The Impact Of Relative Bridge Width On Highway Crashes In Nebraska, Mujahid Ali Bahadur

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

This research examines how bridge width relative to the approach roadway affects crash occurrence on Nebraska highways. The Nebraska Department of Transportation-(NDOT) Bridge Design Manual sets minimum bridge widths based on roadway classification, traffic projections, and the American Association of State Highway and Transportation Officials’ (AASHTO) Load and Resistance Factor Design (LRFD) criteria. While these guidelines ensure structural and functional adequacy, they do not incorporate safety performance analyses based on crash data. This leaves an important gap in understanding how bridge and approach roadway width decisions influence safety outcomes.

This research has four objectives: (1) evaluate crash frequency across different …

Intelligent Method Of Dynamic Control For A Class Of Stochastic Nonlinear Systems, Isamidin Khakimovich Siddikov, Davronbek Abdalimovich Khalmatov, Gulchekhra Rakhimjanovna Alimova, Dilnoza Rakhmanovna Khushnazarova

Chemical Technology, Control and Management

The paper considered the problems of researching the stabilisation system and backstepping control of stochastic nonlinear systems. The characteristics of stochastic nonlinear dynamic control systems are random signals with normal lawful distribution, which significantly complicates task control. In stochastic control, it is necessary to determine the trajectories of the control variables in order to achieve the desired control objective at minimum cost. Since the mathematical equations of stochastic nonlinear systems are not always constant, not every model-based controller can be accurate. Therefore, in this work, a neuro-fuzzy network is used to evaluate the parameters of the control system with backstepping, …

Reinforcement Learning In A Virtual World: A Study Of Ppo And Sac Within Unity Ml Agents, Rufat Mammadzada

Chemical Technology, Control and Management

This study explores the use of Unity3D as a versatile platform for developing, training, and evaluating intelligent agents through reinforcement learning. Leveraging the Unity ML-Agents Toolkit, a dynamic 3D environment was created to examine agent learning behavior using two advanced algorithms: Proximal Policy Optimization (PPO) and Soft Actor-Critic (SAC). The simulation environment consisted of navigable terrain bounded by red borders, with collectible blue balls serving as rewards and a purple cube representing the agent. A carefully designed reward system was implemented to encourage goal-directed behavior and penalize inefficiency, while time constraints introduced an additional challenge requiring both precision and speed. …

Possibilities Of Digitizing And Applying Artificial Intelligence To National Occupational Classification (Noc-2025) In Uzbekistan, Shohrux Nurali O‘G‘Li Narzullayev

Chemical Technology, Control and Management

This article examines the process of digitizing National Occupational Classification (NOC-2025) in Uzbekistan, developed on the basis of the International Standard Classification of Occupations (ISCO-08), and the possibilities of applying artificial intelligence technologies to it. Although this classification exists today in a national form, and its digitization and the introduction of artificial intelligence elements to it based on modern technologies remain a pressing issue. In order to digitize the classification, international systems such as the International Standard Classification of Occupations (ISCO-08, ILO), European Skills, Competences, Qualifications and Occupations (ESCO), Occupational Information Network (O*NET, USA) and National Occupational Classification (NOC, Canada) …

Adaptive Guard Band And Power Control For Resource Allocation In Mobile And Fixed Mission-Critical Iout Networks, Walid K. Hasan, Iftekhar Ahmad, Quoc Viet Phung, Daryoush Habibi

Research outputs 2022 to 2026

The Internet of Underwater Things (IoUT) is transforming underwater communication by enabling essential mission-critical applications such as precise navigation, emergency response coordination, diver safety, robust security and surveillance systems, and real-time environmental monitoring. However, Underwater Acoustic Communication (UAC), which serves as the primary communication medium for IoUT, experiences substantial challenges, including limited bandwidth availability, severe signal attenuation and Doppler-induced frequency shifts, especially pronounced in mobile underwater environments. These challenges degrade throughput and increase latency, making it difficult to meet the strict delay and reliability demands of mission-critical IoUT applications. Without adaptive solutions, real-time underwater communication remains unreliable and inefficient. This …

Enhanced The Simultaneous Recovery/Extraction Of Combined Heavy Metals Of Lead And Vanadium From Synthetic Wastewater Using An Emulsion Liquid Membrane (Elm) With Nanoparticles And Ionic Liquid, Qusay Al-Obaidi, Nora Yehia Selem, Oumaima Karai, Kaoutar Benabderazak, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Recovery/extracting of a combination of lead (Pb(II)) and vanadium (V(V)) ions from wastewater has been enhanced by an emulsion liquid membrane with the presence of magnesium oxide (MgO) or aluminum oxide (Al₂O₃) nanoparticles (20–50 nm size range) in the internal/stripping phase (W1) and ionic liquid ([OMIM] PF6) in the organic/oil phase (O). The study found that the recovery/extraction batch time was shortened, enhancing emulsion extraction efficiency and stability. Furthermore, the study outcomes extend the ELM separation techniques to industrial-scale pollutant recovery/extraction applications, especially heavy metal ions, from industrial effluent. The percentage of Pb(II) recovery/extraction was increased …

Multi-Criteria Decision-Making And Uncertainty Analyses Of Off-Grid Hybrid Renewable Energy Systems For An Island Community, Dibyendu Roy, Hadi Taghavifar, Kumar Vijayalakshmi Shivaprasad, Yaodong Wang, Barun K. Das, Anthony Paul Roskilly

Research outputs 2022 to 2026

This study examines advanced hybrid renewable energy system configurations designed for a remote island community. The configurations integrate multiple technologies, including wind turbines, photovoltaic panels, fuel cells, diesel generators, batteries, converters, electrolyzers, and hydrogen storage tanks, enabling a synergetic approach to energy generation, storage, and management. Excess electricity produced from the systems is utilized for battery charging and green hydrogen production, enhancing system flexibility and resilience. A detailed techno-economic and environmental assessment of the configurations was performed. Furthermore, the Technique for Order of Preference by Similarity to Ideal Solution based multicriteria decision-making framework was employed to identify the optimal configuration. …

Influence Of Organic Matter And Mineral Composition On Carbonate Source Rock Wettability: Implications For Co2 Geostorage, Muhammad Usman, Nurudeen Yekeen, Muhammad Ali, Mujahid Ali, Alireza Keshavarz, Stefan Iglauer, Volker Vahrenkamp

Research outputs 2022 to 2026

Wettability is critical in determining carbon dioxide (CO2) behavior during geological sequestration in unconventional reservoirs. Unconventional reservoirs are compositionally heterogeneous, affecting CO2 plume migration, containment security, and storage capacity during geological sequestration. Previous studies on CO2 storage in unconventional reservoirs have primarily attributed to changes in organic matter content; however, this study examines how variations in the mineralogical and organic matter content combined affect wettability in CO2/brine systems under subsurface conditions. Three samples with varied mineralogy and TOC content were selected from a well drilled in Jordan source rocks—an immature analog of marine-derived, carbonate-dominated, Type IIS source rocks. Samples were …

Interface And Mechanical Properties Of 1d And 1d-2d Carbon Nanomaterials In Copper Matrix, Abigail L. Eaton, Arun K. Nair

Mechanical Engineering Faculty Publications and Presentations

Low-dimensional carbon nanomaterials have unique electron density distributions which warrant their classification as 1D and 2D, and they are useful for a wide variety of nanocomposite applications. This group includes 1D carbyne, which has high stiffness, and a 1D-2D hybrid composed of carbyne and a highly elastic cyclo[18] carbon ring (2D). We use density functional theory and molecular dynamics methods to study the interface properties of carbyne and the hybrid on Cu (111) surface and determine the mechanical properties of nanocomposites comprised of the nanomaterials as a fiber in Cu matrix at varying temperatures. We predict that on Cu (111) …

Stress-Relaxation And Failure Properties Of Spinal Ligaments In Pigs With And Without Scoliosis-Like Deformity, Christian D'Andrea, Mattan Orbach, Dogerno Norceide, Madeline Boyes, Axel Moore, Jacob Jordan, Thomas Schaer, Anita Singh, Patrick Cahill, Edward Vresilovic, Brian Snyder, Sriram Balasubramanian

Student Papers, Posters & Projects

This study addresses the need for accurate tissue material properties in computational models of the spine. Fundamental to functional spinal unit (FSU) biomechanics are the stress-relaxation and failure properties of the interspinous and intertransverse ligaments (ISL and ITL, respectively). These were measured and compared in normative and scoliotic spines using a Yorkshire pig model. Skeletally immature female pig spines were posterolaterally tethered to induce scoliosis. 23 ISLs and 17 ITLs excised from normative and scoliotic spine segments underwent stress-relaxation and failure tests. Group comparisons tested the effects of scoliosis (magnitude, convexity versus concavity), spinal level (thoracic, lumbar), and pig age. …

Characterizing Piezoelectric-Blended Polydimethylsiloxane For Use As A Mechanoelectrical Responsive Cell Culture Substrate, Alexis P. Applequist, Lance D. Cordes, Lais A. Ferreira, Kartik Balachandran

Biomedical Engineering Faculty Publications and Presentations

In this study, we developed a piezoelectric-polydimethylsiloxane (pz-PDMS) composite by blending poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) with PDMS to create a biocompatible, mechanoelectrical responsive material. The pz-PDMS was synthesized with varying piezoelectric concentrations (0%, 1%, 3%, and 5%) and characterized for visual properties, mechanical properties, mechanoelectrical sensitivity, and biocompatibility. Compression testing showed no significant change in mechanical strength with the addition of piezoelectric particles, while mechanolectrical sensitivity testing revealed a non-linear increase in voltage response, with 5% pz-PDMS producing the highest sensitivity. Fatigue testing demonstrated no change in sensitivity after 7 days of cyclic displacement. Additionally, microcantilever experiments demonstrated the high fidelity …

Enhancing Urban Energy Modeling: A Case Study Of Data Acquisition, Enrichment, And Evaluation In Berlin, Felix Rehmann, Martín Mosteiro-Romero, Clayton Miller, Rita Streblow

Research Collection College of Integrative Studies

Urban Building Energy Modeling (UBEM) has become a critical tool for developing local heating and cooling plans, as required by the European Union. Despite growing interest, the reproducibility and reliability of UBEM studies remain limited due to data scarcity and workflow complexity. This paper presents a comprehensive framework to evaluate the data pipeline in UBEM, with a particular focus on data acquisition, enrichment, simulation, calibration, and information application. The approach applies three distinct UBEM workflows (CityEnergyAnalyst, DistrictGenerator, and SimStadt) to the Mierendorffinsel district in Berlin, Germany. We compare the based on quantitative performance metrics and qualitative framework criteria. The results …