Digital Commons Network^™

Ai-Enhanced Heat Transfer Optimization In Magnetic Bio-Nanofluids, Hasan Attyah Shaboot

Al-Esraa University College Journal for Engineering Sciences

This study presents a hybrid Artificial Intelligence–Computational Fluid Dynamics (AI-CFD) framework for optimizing heat transfer in magnetic bio-nanofluids subjected to external magnetic fields. Magnetic bio-nanofluids, composed of biocompatible base fluids containing superparamagnetic nanoparticles, exhibit tunable thermal and flow behavior, making them promising for biomedical and micro-cooling applications. Conventional optimization methods based on experiments or brute-force CFD are computationally expensive and limited in exploring the full design space. To overcome these challenges, an Artificial Neural Network (ANN) surrogate model was developed to predict two key performance indicators, the Nusselt number and the friction factor, with high accuracy (R² > 0.997). The surrogate …

Hybrid Experimental–Computational Study On The Energy Absorption Of Graphene Nanoplatelet-Reinforced Sandwich Structures, Hamdan Yousif Hamdan

Al-Esraa University College Journal for Engineering Sciences

Background: Sandwich composites are widely used in aerospace, automotive, and marine applications because of their lightweight, stiffness, and strength, but they remain prone to out-of-plane impacts and barely visible impact damage (BVID). Graphene Nanoplatelets (GNPs) have shown strong potential to improve fracture toughness and impact resistance. However, hybrid experimental–computational studies applying such reinforcement are still lacking in developing contexts like Iraq, where practical and accessible solutions are essential. Aims: The study investigates the effect of GNP reinforcement on the low-velocity impact behavior and energy absorption of glass fiber/epoxy sandwich panels with PVC foam and balsa wood cores. Objectives include fabricating …

Effect Of Thick Closed Walls Of West And South Elevations Of Iraqi Middle And South Territory Housing Building On Reducing Energy Use, Abeer Qasim Jbur, Shaimaa M. Hamza, Mayyadah Lutfi Abdulwahhab

Al-Esraa University College Journal for Engineering Sciences

Thermal insulation is one of the most important factors in achieving sustainability, increasing efficiency, and reducing energy consumption, but modern insulation materials are expensive, in addition to their availability. Therefore, through our research, we resorted to investigating the issue of reducing thermal load in buildings through the use of thick-walled facades in the southern and western facades, where we studied a building with two windows with windows on the southern and western facades and another without these windows and with thick walls, for two locations, the first in central Iraq, which is the city of Baghdad, and the second in …

The Impact Of Ethyl Levulinate Additive On Diesel Engine Performance And Emissions: An Experimental Study, Maha Ali Ghadbaan

Al-Esraa University College Journal for Engineering Sciences

This study explores the environmental and operational impact of adding Ethyl Levulinate—a biodegradable ester derived from biomass—to diesel fuel. A fuel blend known as B5El6 (comprising 5% biodiesel and 6% Ethyl Levulinate) was prepared and tested experimentally using a single-cylinder diesel engine operating at a constant speed of 1500 rpm under full load conditions. Performance metrics and emission data were recorded, and a Life Cycle Assessment (LCA) was conducted using the IMPACT2002+ methodology.

The results revealed that B5El6 significantly reduced greenhouse gas emissions (100 kg CO2 eq) and improved ecosystem quality. However, it presented challenges in terms of human health …

The Role Of The Scenario In Formulating The Contemporary Architectural Text, Rounaq Arif Mohsin, Abbas Ali Hamza, Bashar Shamil Alkhafaji

Al-Esraa University College Journal for Engineering Sciences

In order to create an integrated architectural text, which is a complicated art that blends beauty and practical elements, a rigorous design procedure is necessary. In this situation, the scenario’s role becomes crucial in developing the current architectural text and directing architectural approaches. In order to better understand how the scenario influences the design process and the interactions between various architectural aspects, this project intends to explore and analyze the impact of the scenario in developing and refining architectural text formulation approaches.

The study looks at the idea of a scenario and how it has been used in architecture, as …

Investigation Of Some Physical Properties Of Slurry Infiltrated Fibrous Concrete (Sifcon) Under Different Curing Times, Rand Kh. Mahmoud, Mohmmed Juad Khadhim, Fayq Hasan Jabbar

Al-Esraa University College Journal for Engineering Sciences

This research studied the effects of different types fibers (Basalt, Carbon and Basalt-Carbon hybrid mix) and curing ages (7, 14, 28 and 56 days) on some physical properties of - Slurry infiltrated fibrous concrete (SIFCON). Density, ultrasonic pulse velocity UPV, Poisson’s ratio and water absorption were measured for the experimental study with 30% cement replacement by Class F fly ash to increase sustainability. It was found that properties were significantly affected by the type and dosage of fiber admixture. The UPV was enhanced by basalt fibers and the absorption reduced up to an optimal range of 3–5% after which agglomeration …

Smart Building Rating System: A Comparative Analysis Of National And International Rating Systems, Amanah Hamidah, Mohammed Ali Berawi, Mustika Sari, Gunawan Saroji

CSID Journal of Infrastructure Development

Smart buildings have become a key part of the Fourth Industrial Revolution, driven by the need for efficient, sustainable, and adaptive built environments. Their importance is growing alongside Indonesia’s effort to develop smart cities. This study compares Indonesia’s national smart building certification system, established under Ministerial Regulation No. 10 of 2023, with two international systems: the European Union’s Smart Readiness Indicator (SRI) and the SmartScore certification. The analysis uses a literature review and comparative method to examine each system’s assessment criteria, scoring method, and certification tier. The findings show that Indonesia’s regulation includes six parameters, such as cybersecurity and operational …

A Study Of Perceptions, Readiness, Benefits, And Barriers Related To Exoskeleton Adoption In New Jersey’S Warehousing Sector, Terry Asante

Theses

The warehousing industry in New Jersey remains a vital component of the region's logistics network, employing more than 200,000 workers who routinely engage in lifting, bending, overhead reaching, and other physically demanding activities. These exposures contribute to musculoskeletal disorder (MSD) rates that exceed national averages, particularly affecting the low back and shoulders. Nationally, MSDs account for an estimated $420 billion in combined direct and indirect costs each year, underscoring the need for interventions that can effectively reduce biomechanical strain. Industrial exoskeletons have emerged as a potential solution, with prior research demonstrating reductions in muscle activation, perceived exertion, and fatigue during …

Simulation-Based Assessment Of Operational Strategies For Visibility-Responsive Variable Speed Limits, Jiyeon Ban

Theses

Managing speed limits in adverse weather is crucial for highway safety. Variable Speed Limit systems aim to adjust speed limits according to weather conditions, yet many traffic management centers depend on manual operator judgment. Rapid visibility fluctuations, along with operators handling multiple responsibilities, can cause delays in responding to deteriorating conditions, increasing the risk of rear-end collisions. A VSL control strategy is developed using real-time Road Weather Information System data to enable more proactive and effective adjustments. Microsimulation analysis indicates that visibility-responsive VSL operations can reduce conflicts by 59% in fog. Applying VSL only to fog-affected sections yields clear safety …

Evaluating Stormwater & Carbon Benefits Of Urban Street Trees, Anthony J. Rodriguez Diaz

Theses

Urban areas experience a multitude of environmental challenges, including flooding and air pollution. In response to these pressures, urban forests have emerged as an essential nature-based strategy to enhance resilience and reduce climate-related risks. The implementation and expansion of urban street trees further contribute to this effort by mitigating stormwater runoff and reducing atmospheric carbon emissions.

Fortunately, advances in environmental modeling have made it increasingly possible to quantify these ecosystem services using specialized software. The United States Department of Agriculture (USDA) Forest Service's i-Tree suite exemplifies this progress. The software provides a comprehensive set of tools designed to quantify environmental …

Heathammer: Effects Of Thermal Stress On Dram Technology Reliability Using Rowpress And Rowhammer, Filip Roth Tronnes-Christensen

Theses

Modern DRAM scaling has reduced cell capacitance and increased thermal sensitivity, making disturbance-based faults such as RowHammer and RowPress increasingly significant reliability and security concerns. RowHammer induces bit flips through repeated row activations, while RowPress does so by holding a wordline open for an extended duration; both exploit inherent capacitive coupling and leakage mechanisms in dense DRAM arrays. This thesis introduces HeatHammer, a thermally assisted disturbance exploit that interleaves RowPress and RowHammer operations to amplify charge leakage and trigger row-traversing bit flips. Using the FPGA-based DRAM-Bender test platform, HeatHammer is evaluated on four commercially available DDR4 modules from different manufacturers …

A Novel Rheological Technique To Measure The Yield Stress In Equibiaxial Elongation, Asher Segal

Theses

Yield stress measurement in non-Newtonian fluids, particularly under complex flow conditions such as equibiaxial elongation, remains a significant challenge in experimental rheology. This work presents the development of a novel method, Continuous Lubricated Squeezing Flow (CLSF), designed to quantify the normal yield stress of viscoelastic materials while minimizing boundary artifacts.

The CLSF method was implemented and validated using Carbopol 940, a model yield-stress gel, at concentrations of 1 wt% and 2 wt%. Comparative shear rheology was first performed to establish baseline yield stresses and verify sample integrity. CLSF experiments were then conducted over controlled flow rate increments and gap distances …

Real-Time Deep Learning Detection Of Toraja Carving Motifs Using Yolo11m For Cultural Heritage Preservation, Herman Herman, Farid Wajdi Mufti, Abdul Rachman Manga, Haidawati Nasir

Knowledge Engineering and Data Science

Toraja carvings are an important part of Indonesia’s cultural heritage, rich in symbolic, aesthetic, and philosophical meaning. However, the identification and preservation of carving motifs still rely on subjective, time-consuming manual processes, limiting scalability and inconsistent knowledge transmission. From a Knowledge Engineering and Cognitive Data Science perspective, this challenge highlights the need for mechanisms that can transform visual cultural artifacts into structured, machine-interpretable knowledge. This study investigates the use of the YOLO11m model as a data-driven approach for modeling cultural knowledge through automated detection of three Toraja carving motifs: pa_tedong, pa_kapu_baka, and pa_manu_londongan using original images collected directly from traditional …

Forecasting Inland Waterway Container On Barge Volume: A Machine Learning Approach Using Economic Features, Fan Bu, Heather Nachtmann

Industrial Engineering Faculty Publications and Presentations

This study presents a machine learning approach to predict Container-on-Barge (COB) volume in Inland Waterway Transportation (IWT) systems, focusing exclusively on using economic features as predictors. Five machine learning models were trained using European economic features to forecast COB volume, while historical COB volume was used solely for validation and hyperparameter tuning. Among these models, the convolutional neural network combined with long short-term memory (CNN-LSTM) exhibited superior performance, achieving a mean absolute percentage error (MAPE) of 1.08% when forecasting eight consecutive quarters of COB volume in Europe. The results demonstrate the feasibility of accurately forecasting COB volume using economic features. …

Health Risk Assessment (Hra) In Home-Based Ironing Businesses: Risk Identification, Intervention, And Evaluation In Johar Baru District, Central Jakarta, Heru Alfares, Irawadi Darmaputra, Marsen Isbayuputra, Muhammad Ilyas

Occupational and Environmental Medicine Journal of Indonesia

Background Home-based ironing businesses in Johar Baru District, Central Jakarta, are part of the informal sector, vulnerable to health risks due to suboptimal working conditions. This study aims to identify, assess, and control health risks through a Health Risk Assessment (HRA) approach.

Methods Research methods include direct observation, interviews, environmental measurements, health screenings, and ergonomic surveys using the BRIEF (Baseline Risk Identification of Ergonomic Factor) instrument.

Results The results indicate that the temperature in the ironing area reaches 33°C, exceeding the comfort standard, and that 80% of workers have dark yellow urine, indicating a high risk of dehydration. Risk assessment …

Control Strategies For 6-Dof Quadcopter Uavs: Cascade Pid Stabilization In White Noise Conditions, An Vo Van, Hung Ha Duy

Makara Journal of Technology

In this study, a cascade PID control structure is proposed and implemented for a 6-degree-of-freedom (6-DOF) unmanned aerial vehicle (UAV) to enhance stability and trajectory tracking capabilities under both noise and non-noise conditions. The controller was designed based on the Tyreus–Luyben tuning method and was evaluated using quantitative metrics, including rise time, settling time, overshoot, and steady-state error. Simulation results on MATLAB/Simulink show that the controller achieves high performance in angular channels (ϕ, θ, ψ) and altitude (z) with a short rise time (< 2s), slight overshoot (< 1%), and nearly eliminated steady-state error. However, the horizontal position channels (x, y) have a longer settling time (~110s) and are sensitive to white noise. Quantitative comparisons with other control methods show that the cascade PID outperforms the standard PID in terms of accuracy and stability, achieving a performance comparable to LQR under noise-free conditions, but is less robust in the presence of noise than advanced methods like SMC and MPC. These results confirm the feasibility of cascade PID in UAV applications and indicate potential future improvements by integrating nonlinear, adaptive, or intelligent control strategies.

Mechanical And Durability Properties Of Cement Panels Reinforced With Hybrid And Pva Fibers, Shukran H. Faraj, Mohammed J. Kadhim

Al-Esraa University College Journal for Engineering Sciences

This study examines the synergistic effects of hybrid fibers (HF) and polyvinyl alcohol (PVA) fibers on the structural and thermal properties of silica-fume cement panels. Scanning electron microscopy (SEM) was employed to examine mortar mixtures with varying fiber content to assess their enhancement of microstructure. We conducted several experiments on compressive, flexural, and splitting tensile strength, in addition to water absorption and thermal conductivity. The results indicate that 1% HF exhibits superior mechanical qualities, with a compressive strength of 46.89 MPa, a flexural strength of 8.56 MPa, and a reduced thermal conductivity of 0.83 W/m•K. PVA fibers at 2% enhance …

Experimental Analysis Of Droplet Deformation Dynamics In Combined Dc Electric And Shear Flow Fields Using Dpiv, Ayad Ibrahim Khlewee

Al-Esraa University College Journal for Engineering Sciences

This paper presented a systematic study of such droplet deformation at the intersection of uniform DC electric field and hydrodynamic shear flow, in which we focused on conductivity ratio (R) and permittivity ratio (S), describing their influence. The results demonstrate that droplet dynamics is extremely sensitive to the regime: under DC only, either elongation or compression depending on whether R > S or R S, similarly to classical EHD predictions. Under shear-only conditions, deformation was dictated by the balance of elongational stresses (EC) and rotational stresses (RC), with increasing capillary number (Ca) leading to progressive elongation and oscillatory orientation dynamics. When …

The Imaginary In Architecture: The Conceptual Structure Of The Imaginary And Its Manifestations In Architectural Text, Noora Ghadir Hlail, Abbas Ali Hamza Al Greiza

Al-Esraa University College Journal for Engineering Sciences

This study explores the concept of the imaginary as a collective cognitive and cultural structure that shapes symbolic reality through images, myths, and deeply rooted symbols in collective memory. The research applies this concept within the field of architecture, aiming to understand how the imaginary is embodied in architectural texts as symbolic carriers of identity and cultural meaning. Adopting a descriptive-analytical methodology, the study develops a theoretical framework comprising key components—preconditions, mechanisms, and traits of the imaginary—and applies it to two selected case studies: the General Secretariat of the Iraqi Council of Ministers and the Louvre Abu Dhabi Museum. The …

Generative Ai For Method Development In Analytical Chemistry: A New Paradigm In Experimental Design And Optimization, Yasir Fathi Mahmood

Al-Esraa University College Journal for Engineering Sciences

The fast development of artificial intelligence (AI), especially generative AI models, is changing the environment of analytical chemistry. As classical method generation in analytical methods relies on manual trial-and-error methodology as well as statistical methods, generative AI is a new paradigm with automated generation of experimental methodology and optimization. In this paper, the authors discuss the use of generative AI-based technologies, including large language models (LLMs) and neural network-based generators, to create new, efficient, and customized methods of analysis. The paper examines existing applications, technology frameworks, and issues and offers a roadmap with regards to the future incorporation of generative …

Numerical Modeling And Experimental Validation Of A High-Temperature Latent Heat Thermal Energy Storage System Using Metallic Phase Change Materials For Concentrated Solar Power Applications, Fouad Hashim Sharhan

Al-Esraa University College Journal for Engineering Sciences

To ensure reliable performance for the power-block of CSP plants, high power density and near-isothermal discharge must be achieved. A robust means of achieving this is through thermal energy storage (TES). High temperature latent heat storage (LHS) with phase change materials (PCMs) can serve these purposes, however the conventional salts used in PCMs typically suffer from low thermal conductivity that limits power density and increases energy storage charging/discharging times. This manuscript investigates ways to address these limitations using high temperature metallic phase change materials (MPCMs) while also developing a validated numerical framework to aid in their design. To this end, …

Thermal Performance Evaluation Of Solar Cooling Systems For Educational Facilities In Baghdad, Yasser Alawi Mohammed Attia Al-Jubouri

Al-Esraa University College Journal for Engineering Sciences

Schools in Baghdad also suffer from poor thermal comfort, which is a common problem in high-temperature and low-humidity arid climates such as that of the city, where using cooling devices leads to a large energy demand and overloads on the national power grid. Such study offers a thorough assessment of the thermal performance of solar-based cooling systems in an efficient manner to be suitable for educational buildings in Baghdad. The analysis is centred on a solar thermal cooling system with absorption as the heat interaction medium, and an experimental characterisation and mathematical simulation itself are performed. A pilot installation, consisting …

An Entrepreneurial Approach To International Engineering Programs, Mark W. Rectanus

Journal of International Engineering Education

No abstract provided.

Efficient Task Allocation Technique For Robots In Smart Warehouse Using Center Of Items (Coi) Methodology, ‪Ahmed Yahya‬‏, Mohamed S. Saraya, Ahmed I. Saleh

Mansoura Engineering Journal

Nowadays, online shopping is very important in Daily life. in 2020 During the quarantine during the spread of COVID-19, online orders increased dramatically, as a result of the great progress in fifth-generation technologies and using the Internet of Things (IoT) and industrial Internet of Things (IIoT), industry 4.0 and 5.0, fog computing, cloud computing, robots systems, and drones systems. Smart warehouses picking system becomes a Basic need and can be implemented to improve efficiency in logistics. Smart warehouses are growing more dependent on robot systems to make the process of meeting these requests more flexible and effective. Therefore, the allocation …

Aerodynamics And Heat Transfer In Polymer Blown Film Processing: Experimental And Numerical Investigation, Mohammad Luqman Zulbakri, Nur Atiqah Mat. Rautin, Raa Khimi Shuib, Ku Marsilla Ku Ishak, Auratus Zuratul Ain Abdul Hamid, Mohamad Danial Shafiq, Mohamad Yusof Idroas, Muhammad Khalil Abdullah

Makara Journal of Technology

The effects of airflow dynamics, heat transfer, and mechanical properties on the HDPE blown film extrusion process were examined using a single-lip air ring with a fixed compressed-air valve opening angle of 10°. Reynolds numbers ranging from 9175 to 25911 were analyzed to understand their impact on cooling efficiency, bubble morphology, and film properties. Numerical simulations employing the Standard k−ω turbulence model in ANSYS FLUENT v2023, with mesh refinement achieving y+ ≈ 1, captured detailed flow and heat transfer behavior. Results showed that higher Reynolds numbers significantly enhanced the heat transfer coefficient, with values increasing from 1096 W/m²·K at Reynold …

Prediction Of Maximum Local Scour Depth Due To Horizontal Jets Of Flushing Gate Using Artificial Neural Network, Adhy Kurniawan, Muhammad Sulaiman, Agus Maryono, Bambang Agus Kironoto, Amalia Ula Hazhiyah

Makara Journal of Technology

Local scour is a serious concern for hydraulic engineers. To maintain the reservoir capacity, flushing accumulated sediment is necessary, resulting in a turbulent and scouring jet from the flushing gate. Predicting the maximum scour depth from these water jets is crucial for civil engineers. Despite many proposed equations, one have shown consistent applicability due to the complex nature of the process. Ensuring accurate prediction between hydraulic parameters and the geometry of the scour hole in prototype experiments remains a key issue. To address this issue, this paper examines the use of artificial neural network (ANN) analysis as a computing device …

Dual-Interface Wifi Packet Sniffer System Using Esp32-Cam With Real-Time Pcap Generation For Iot Network Analysis, Boy Setiawan Boy, Maghfiroh Maulani, Zico Pratama Putra, Muhammad Senoyodha Brennaf

Makara Journal of Technology

This study focuses on designing and implementing a cost-effective and energy-efficient WiFi packet sniffer system using the ESP32. The ESP32-CAM module, which combines WiFi, Bluetooth, and microSD support, is used to capture IEEE 802.11 frames in real-time via promiscuous mode. Packets are stored in packet capture format, which is compatible with tools such as Wireshark and Scapy. Developed using the official ESP-IDF, it offers low-level control and high performance. Two user interfaces were implemented: a UART-based text menu and a web-based HTTPS menu hosted on the ESP32 itself. Functional and performance evaluations were conducted with a focus on capturing broadcast …

Digital Twinning To Advance Effluent Water Treatment For Pulp And Paper Mills: A Data-Driven Approach For Process Optimization, Fatima Iqbal, Fatemeh Naeijian, Christopher Page, George Fu, Francisco Cubas-Suazo, Stetson Rowles

Civil Engineering & Construction: Faculty Publications

The pulp and paper industry is the third largest freshwater consumer and faces pressure to minimize water usage and environmental impact. Aerated stabilization basins (ASBs) play a crucial role in treating their wastewater, yet existing open-source models often fail to accurately predict treatment efficiency across varying conditions. This study addresses this gap by advancing ASB modeling for ultimate oxygen demand prediction. Specifically, we improved accuracy with variable temperature corrections and incorporating uncertainty to capture the variability in outputs. The models demonstrated strong predictive performance for ultimate oxygen demand (mainly carbonaceous and nitrogenous biochemical oxygen demand) with R2 values ranging from …

Bio-Papcz: Corn Starch-Based Composite Bioplastic Reinforced With Pineapple Leaf Fiber (Palf), Zinc Oxide (Zno), And Polyvinyl Alcohol (Pva), Marvin C. Caya, Shervin Austin C. Huang, Jovar Khalel J. Maghari, Ruel M. Levida

Sinaya: A Philippine Journal for Senior High School Teachers and Students

Plastic pollution poses a serious global threat, as petroleum-based plastics persist for centuries, and their surging production of over 450 million tons overwhelms ecosystems (Ritchie et al., 2023). Using a quantitative experimental research design, the study examined the effects of varying concentrations of cornstarch-based bioplastic reinforced with pineapple leaf fiber (PALF), polyvinyl alcohol (PVA), and zinc oxide (ZnO) on the bioplastic’s tensile strength and soil degradability. Sample C2 (ZnO 3.0 %w/w; PVA 9.0 %w/w) demonstrated the optimal tensile properties with a tensile strength of 0.76 MPa and an elongation at break of 6.40%, which was attributed to the addition of …

Effects Of Foam Type And Thickness On Impact Resistance, Thermal Insulation, And Cost-Effectiveness Of Medical Containers For Drone Delivery, Josh Henry C. Soriano, Eriel V. Fonte, Lambertsus S. Novera, Nicolai Paolo B. Villarin, Joel B. Jalon, Jr.

Sinaya: A Philippine Journal for Senior High School Teachers and Students

Accessible healthcare remains a challenge for rural communities lacking reliable infrastructure for medical supply delivery. Delivery drones have recently emerged as a viable alternative, dropping medical containers during flight. However, the effectiveness of different foam types and thicknesses combined with corrugated cardboard as shock-absorbing materials in a medical container for delivery drones has yet to be tested. Thus, this study designed cost-effective containers using corrugated cardboard and multiple foam types and thicknesses, aiming to preserve the integrity of the contents, withstand impact, and control temperatures. Four foam types—polystyrene, polyurethane, polyethylene, and expanded polystyrene (EPS) —were tested at 1 cm, 2 …