Digital Commons Network^™

Analysis Of Policies And Incentives For The Successful Implementation Of Hydrogen-Fueled Medium-Duty And Heavy-Duty Vehicles In Humboldt County, California, Alka Verma

Cal Poly Humboldt theses and projects

The 21st century has seen a significant rise in global greenhouse gas (GHG) emissions, with the transportation sector contributing 23% of these emissions. Medium-duty and heavy-duty vehicles (MD/HD) are particularly impactful, accounting for over a quarter of transport-related emissions. In Humboldt County, California, transportation represents 53% of total emissions, with MD/HD vehicles being a major contributor. As light-duty vehicles shift to zero-emission alternatives, the MD/HD sector faces unique challenges. Hydrogen fuel cell vehicles offer a promising solution, providing longer range, higher energy density, and quicker refueling compared to battery electric vehicles (BEVs). These features make hydrogen an attractive option for …

The Composition Of Gases From A Diffusion Flame Above Longleaf Pine Needle Fuel Beds, David R. Weise, Thomas H. Fletcher, Timothy J. Johnson, Weimin Hao, Russell G. Tonkyn, Catherine A. Banach, Javier Palarea-Albaladejo, Mahsa Alizadeh, Stephen Baker

Faculty Publications

The gas and tar composition of a wildland fire diffusion flame from longleaf pine needles is currently relatively unmeasured and more data are needed to fill in the gap between pyrolysis data and smoke plume data, thus improving physical and chemical modeling of wildland smoke formation. A pilot experiment to measure light gas and tar composition of such a flame is described for three flame zones: persistent flame (flame base), intermittent flame, and smoke plume. Flame gases from 24 experimental fires were collected in canisters and analyzed for CO2, CO, H2, CH4, and C2 to C7 hydrocarbon gases. Other light …

Efficiently Stowed Flashers With Uniform-Thickness Panels Based On Non-Developable Origami, Larry L. Howell, Robert J. Lang, Specer P. Magleby, Davis Wing

Faculty Publications

We present the mathematical construction of a deployable flasher pattern with near-uniform nonzero thickness in the deployed form and efficient face-to-face packing in the stowed form. We demonstrate its fabrication, deployment, and stowage. The results facilitate the design and manufacture of deployable systems with panels whose substantial thickness is dictated by the end application, with particular utility for space systems.

Feasibility Study Of Concurrent Removal Of Organics And Ammonium Using An Iron Dosed Upflow Anaerobic Sludge-Blanket Bioreactor, Morgan Elizabeth Amos

Graduate Theses, Dissertations, and Problem Reports (ETD)

Aerobic microbial reactions have commonly been utilized in treatment processes to oxidize and remove organics and nitrogen through aeration, using processes such as nitrification that converts ammonium (NH₄⁺) into nitrite (NO₂^-) and nitrate (NO₃^-). Anoxic microbial reactions like denitrification often require organic compounds as an external source to chemically reduce the oxidized nitrogen (NO₃^- and NO₂^-) to nitrogen gas (N₂) for nitrogen removal from the liquid phase. These mainstream processes have a high chemical cost and energy footprint which results in an increased release …

A Study In The Advanced Manufacturing Of Full Solids Oxide Fuel Cells (Sofcs) Via Aerosol Deposition (Ad) Methods With Macro- And Microstructural Defect Characterization, Davis A. Warmuth

Graduate Theses, Dissertations, and Problem Reports (ETD)

The goal of this work is to 3D print a full SOFC layer-by-layer using aerosol deposition (AD) at a resolution of 5 μm. To achieve this goal, several studies were undertaken to develop and optimize an AD system to use ceramic inks. A 130 kHz AD system was developed with 4 material pumps to allow for depositions of individual compositions of the in-situ mixture of multiple solutions to allow for the fabrication of functional gradients in three dimensions. This system was then programmed to deposit air electrode layers containing different material ratios and porous microstructures, comparing their electrochemical performance to …

Exploring The Interplay Of Operational Conditions, Microbial Communities, And Water Quality In Drinking Water Ozone-Biofiltration, Kara Yvonne Cunningham

Graduate Theses, Dissertations, and Problem Reports (ETD)

Ensuring reliable access to safe drinking water is a growing global challenge as water utilities face variable source water quality driven by population growth, land‑use change, and climate change impacts. To address these challenges, utilities are implementing advanced treatment technologies designed to improve reliability under variable source water conditions. Ozone-biofiltration has emerged as a treatment approach that can reduce a wide range of natural and anthropogenic contaminants. However, despite its increased use, there is limited insight into the biological processes shaping filter function or how they respond to operational and environmental changes. Advances in molecular microbiology and high-throughput sequencing now …

Bridging Physics-Based Modeling And Machine Learning To Predict Material Behavior: Applications In Fatigue Crack Growth And Dielectric Property Characterization, Ansan Pokharel

Graduate Theses, Dissertations, and Problem Reports (ETD)

This dissertation integrates physics-based modeling with machine learning (ML) to predict how materials behave under complex thermal and mechanical conditions. A key innovation of this work is the use of finite element analysis (FEA) to supplement experimental data. This approach creates more diverse and representative synthetic datasets, helping to reduce the limitations and biases that arise when training ML models solely on experimental measurements. The research focuses on two applications: improving the prediction of fatigue properties in superalloys and estimating temperature-dependent, high-frequency dielectric properties relevant to microwave-based chemical processing.

In the first study, low-cycle fatigue experiments were performed on the …

Optimization Of Carbon Capture And Sequestration In The Tri-State Hub West Virginia, Ohio, And Pennsylvania, Saif Abdullah Saif Al-Nabhani

Graduate Theses, Dissertations, and Problem Reports (ETD)

Carbon Capture and sequestration (CCS) is a critical way for the decarbonization of power and industrial sectors. The Tri-State area between West Virgina, Ohio and Pennsylvania are a diverse region with various CO₂ sources, deep saline, depleted reservoirs, pipeline network, and the midstream infrastructure that makes it possible for Captured CO₂ to be safely and economically moved and stored over long periods of time. This project addresses the need for an integrated optimization framework that includes CO₂ sources to potential storing sites using a transportation network design and a subsurface model that secures storage and minimizes leakage risk.

The model …

Using Aqueous Geochemistry Of Acid Mine Drainage To Spatially Investigate Concentrations Of Rare Earth Elements Throughout West Virginia, Pennsylvania, And Maryland, Elyssa Lynn Allen

Graduate Theses, Dissertations, and Problem Reports (ETD)

Rare earth elements (REEs) are an important commodity utilized in many industries such as electronics, defense, manufacturing, medicine, and green energy production. A lack of economical domestic sources forces the United States to import a majority of its supply, and incentivizes novel methods of acquisition. Mining regions of the United States, such as Appalachia or the West, are afflicted with acid mine drainage (AMD) impacted surface waters. REEs occur in varying concentrations within coal seams, indicating that coal and its waste are potential avenues of recovery that might also incentivize the remediation of coal impacted areas. Understanding spatial and geochemical …

A Digital Calibration Source For 21 Cm Cosmology Telescopes, Kalyani Balkrishna Bhopi

Graduate Theses, Dissertations, and Problem Reports (ETD)

Precise calibration of radio telescope beams and gains is a central requirement for 21 cm intensity mapping experiments, which aim to measure large scale cosmological structure through the redshifted emission line of neutral hydrogen. Bright astrophysical foregrounds dominate the sky at these frequencies, and separating them from the cosmological signal demands precise control over instrumental systematics, particularly the telescope beam and its frequency-dependent response. Existing aerial calibration sources are incoherent broadband emitters, detectable only as total power. They provide no direct phase information and suffer from poor sensitivity in low signal-to-noise regimes.

We present the Precision Emitter for 21cm Array …

Ai-Driven Prediction And Reconstruction Of Missing Cased-Hole Logs For Improved Well System Understanding, Samuel Avilez Martinez

Graduate Theses, Dissertations, and Problem Reports (ETD)

Well logging is a fundamental technique in formation evaluation providing continuous, real-time measurements of geological and petrophysical properties within a well. Through the systematic analysis of well logs, engineers and geoscientists can accurately determine critical formation characteristics, including porosity, permeability, lithology, and fluid composition. Well logging is fundamental for making informed decisions and reducing uncertainties in the exploration and development of oil and gas reservoirs.

Despite its significance, the acquisition of reliable well log data in oil and gas wells is often compromised by various operational, mechanical, and formation-related challenges, as well as pressure, fluid, and equipment constraints. In high-risk …

Hyperglycemia Detection From Sigle - Lead Ecg Using A Hybrid Cnn & Transformer Model, Adam Ayomikun Ogunjembola

Graduate Theses, Dissertations, and Problem Reports (ETD)

Abstract
Hyperglycemia Detection from Single-Lead ECG using a Hybrid CNN & Transformer Model
Adam Ogunjembola

Diabetes Mellitus is known as high blood glucose. This high blood glucose level happens when the body has a problem with producing or using insulin. Insulin is a very important hormone that the pancreas makes to control how much glucose gets into the bloodstream and cells. Diabetes Mellitus has an effect on the body if it is not treated, such as damaging the blood vessels and nerves which can lead to stroke, kidney failure, heart attack and permanent loss of vision. Since people with diabetes …

Bi-Level Optimization Of Peer-To-Peer Trading In A Decentralized Energy Market, Marshal Miezah

Graduate Theses, Dissertations, and Problem Reports (ETD)

Distributed power generation based on rooftop photovoltaic (PV) systems integrated with battery storage emerges as a promising pathway for reducing greenhouse gas emissions and im- proving flexibility in modern power systems. This study develops a bi-level optimization model to examine how prosumers maximize profit through peer-to-peer (P2P) energy trading with consumers and the grid, and how consumers minimize cost by leveraging P2P trading. The bi-level problem is reformulated as a single-level mixed-integer programming (MIP) model using Karush- Kuhn-Tucker (KKT) conditions to improve tractability and preserve market-clearing behavior. For the model validation and case study development, prosumer and consumer data are …

Elucidating Structure–Reactivity Relationships In Ni-Catalyzed Co2 Methanation, Majed Alam Abir

Graduate Theses, Dissertations, and Problem Reports (ETD)

The catalytic hydrogenation of carbon dioxide (CO₂) to methane represents a promising strategy for carbon utilization and renewable energy storage within power-to-gas systems. When coupled with hydrogen derived from renewable electricity, CO₂ methanation enables the conversion of intermittent energy sources into storable and transportable chemical fuels compatible with existing natural gas infrastructure. Nickel-based catalysts have emerged as leading candidates for this reaction due to their high activity towards CO₂ methanation, abundance, and cost. However, the performance and long-term stability of Ni catalysts are strongly influenced by catalyst support properties, Ni nanoparticle size, and promoter effect, and …

Swarm Of One: Self-Organization In Multicellular Robots, Trevor Riley Smith

Graduate Theses, Dissertations, and Problem Reports (ETD)

Designing robots traditionally relies on centralized, top-down methods that constrain adaptability and resiliency, producing systems optimized for specific tasks. However, such systems often fail in complex environments, such as extraterrestrial, disaster, or natural settings, where designers cannot foresee every scenario a robot may encounter. Achieving autonomy in these contexts requires robots that are resilient and capable of adapting to the unknown. Multicellular organisms exhibit this adaptability through self-organization, where complex structures and behaviors emerge from local interactions among their cells. Such organisms can be viewed simultaneously as a single entity and a swarm of cooperating cells, i.e., a Swarm-of-One.

This …

Development And Validation Of A Multi-Output Neural Network-Based Virtual Temperature Sensor For Electric Vehicle Thermal Management, Dalton Michael Wiggins

Graduate Theses, Dissertations, and Problem Reports (ETD)

Battery electric vehicles (BEVs) rely on accurate thermal management to ensure component performance, efficiency, safety, and long-term durability. Critical propulsion system components, including electric motors and high-voltage battery packs, are commonly monitored using physical temperature sensors. However, these sensors increase system cost, introduce additional hardware complexity, and may be impractical for directly measuring temperatures at critical internal locations. Virtual temperature sensors (VTSs) provide a software-based alternative by estimating component temperatures using readily available vehicle operating data.

This research presents the development and validation of a long short-term memory (LSTM) neural network-based virtual temperature sensor capable of simultaneously estimating the motor …

Architecture And Mechanistic Engineering Of Nanocomposite Steam Electrodes For High-Performance Metal-Supported Protonic Ceramic Cells, Xuemei Li

Graduate Theses, Dissertations, and Problem Reports (ETD)

The advancement of proton-conducting ceramic cells (PCCs) is crucial for efficient energy conversion in hydrogen- and/or ammonia-based energy carrier systems. However, a bigger success requires significant progress in cell fabrication, interfacial stability, fast electrode kinetics, and high Faradaic efficiency. This study investigates the rational design, fabrication, and performance breakthroughs of PCCs, with a focus on electrode architecture engineering, material interfacial coupling, and mechanistic understanding of electrochemical processes.

The metal-supported fuel electrode structure of PCFCs was systematically optimized, revealing the significant influence of Ni diffusion on cell performance and durability. High power density and stable ammonia-fueled operation were achieved. A heterointerface-rich …

Multiphysics Modeling Of Microwave-Assisted Calcination Of Soec Perovskite Precursors, Hongwei Liu

Graduate Theses, Dissertations, and Problem Reports (ETD)

The calcination of precursor powders is a critical step in the synthesis of solid oxide electrolysis cells (SOECs), where phase purity and microstructural control directly influence electrochemical performance. Conventional calcination methods are energy-intensive and time-consuming, often requiring prolonged high-temperature processing. In this thesis, microwave-assisted calcination is investigated as an alternative approach to enable rapid, energy-efficient processing of SOEC per- ovskite precursor powders. Microwave heating offers distinct advantages, including volumetric and selective heating, reduced processing times, and improved energy utilization compared to con- ventional thermal methods. A multiphysics modeling framework is developed, which integrates electromagnetic wave propagation, governed by Maxwell’s equations, …

Analysis Of Battery Degradation Effects On Optimized Torque Splitting In Dual-Motor Electric Vehicles, Homer E. Butcher

Graduate Theses, Dissertations, and Problem Reports (ETD)

Battery electric vehicle performance depends on both powertrain efficiency and battery-health. In dual-motor all-wheel-drive battery electric vehicles, driver-requested torque can be distributed between front and rear electric drive units, creating an opportunity to reduce electrical energy demand through torque allocation. However, lithium-ion battery aging changes the electrical behavior of the energy storage system through capacity fade and internal resistance growth. Capacity fade reduces the usable energy and vehicle range, while resistance growth increases voltage drop, current-related losses, and battery electrical loading. This thesis evaluates how these degradation effects influence the energy consumption, simulated range, and battery electrical behavior of optimized …

Semantic-Weighted Lidar–Camera Slam For Robust Mapping In Vegetation-Rich Environments, David Aigbovboise Akhihiero

Graduate Theses, Dissertations, and Problem Reports (ETD)

Many LiDAR odometry and SLAM methods are lightweight and effective, but they assume that all LiDAR point returns are equally reliable. In practice, this assumption is often violated in vegetation rich or semi transparent environments, where in a single beam footprint, LiDAR beams may intersect multiple scattering surfaces like leaves, branches or glass. These ambiguities in returns produces probabilistic or biased range measurements that violate the assumptions of most geometric registration frameworks and can lead to drift and inconsistency.

To address this challenge, this dissertation proposes a semantic-weighted LiDAR-camera SLAM framework that integrates class dependent weights into a front-end LiDAR …

Experimental Evaluation Of 100 Ft X 10 Ft Frp Truss Pedestrian Bridge, Ashish Dhital

Graduate Theses, Dissertations, and Problem Reports (ETD)

ABSTRACT

Experimental Evaluation of 100 ft x 10 ft FRP Truss Pedestrian Bridge

Ashish Dhital

FRP truss bridges are now increasingly used in pedestrian bridge applications due to their high strength-to-weight ratio, corrosion resistance, better impact performance compared with conventional materials, and ease of assembly. These advantages make FRP systems attractive for accelerated construction, remote-site installation, and environments where steel or reinforced concrete bridges may experience corrosion-related deterioration. Due to insufficient data on both strength and serviceability (i.e deflection, frequency) performances. Full-scale testing of FRP pedestrian bridges of longer spans (50’-100’) is needed to better understand the dynamic behavior, long-term …

Assessing Water Quality In Drinking Water Distribution Systems: Rural Infrastructure Challenges, Hydrodynamic Effects On Biofilms, And Biofilm Contribution To Disinfection By-Products Formation, Vinila Vasam

Graduate Theses, Dissertations, and Problem Reports (ETD)

Access to clean and safe drinking water remains one of the most persistent public health and environmental challenges in the United States. Maintaining water quality after leaving the treatment plant in drinking water distribution systems (DWDS) is a complicated and often overlooked challenge. Most research focuses on water treatment and source water quality, but not on the miles of pipe that follow. Aging infrastructure, complex flow patterns in the DWDS, and limited resources make water quality management especially difficult. This dissertation includes three core studies: 1) A system-level analysis of small and rural utilities in the geographically complex region of …

Development Of Periodic Plasmonic Nano-Structures For Enhanced Labeled Bio-Sensing Systems, Kyle Zackary Smith

Graduate Theses, Dissertations, and Problem Reports (ETD)

The biomedical industry has seen sustained growth over the past half century, with a continually increasing demand for flexible, easy-to-use, and cost-effective tools. One large area of commercial interest has been point-of-use or point-of-care diagnostics, using optical based Lab-On-Chip (LOC) style systems. Label and label-free fluorescence detection systems are common benchtop modalities that have seen recent integration into these portable, cost-effective LOC applications. However, despite their maturity, there are still opportunities to improve device characteristics, specifically in reference to throughput, limit-of-detection (LOD), and hybrid integration (along with associated costs).

Optical research avenues at WVU have focused on improving these systems …

Deep-Learning-Based Generation Of Synthetic Contactless Fingerphotos, Christopher Harry Burton

Graduate Theses, Dissertations, and Problem Reports (ETD)

The collection of biometric data is a labor-intensive, high-resource process that presents significant logistical, privacy, and cost barriers for researchers and developers. To address these challenges, the biometrics community has increasingly turned to generative models capable of producing synthetic datasets that reflect the statistical properties of real data. While substantial progress has been made in synthetic fingerprint generation for contact-based modalities, the contactless fingerphoto domain has remained largely underserved. This work presents a deep learning-based approach to synthetic contactless fingerphoto generation using a Stable Diffusion model guided by multimodal conditions (text and image). The dataset used for training was collected …

Influence Of Surface Features On Heat Transfer During Dropwise Condensation Over Superhydrophobic Surfaces In Shear Flow, Shaur Humayun, R. Daniel Maynes, Julie Crocket, Brian D. Iverson

Faculty Publications

This study investigates heat transfer during dropwise condensation (DWC) on superhydrophobic (SH) surfaces in humid air shear flow, emphasizing the effect of increased drop mobility and the influence of surface micro/nanostructure on heat transfer rates. Experiments were conducted on smooth hydrophobic, microstructured SH, nanostructured carbon-infiltrated carbon nanotube (CICNT) surfaces, and two-tiered SH surfaces with both micro and nanostructures. Heat transfer rates were measured under humid air flow rates in the range of 2–4 CFM. Experimental results demonstrate that surfaces with nanostructure (including two-tiered structures) exhibit increased drop mobility and coalescence-induced drop jumping, enhancing drop removal rates and overall heat transfer …

Viscoelastic Behavior Of Magnetically Filled Pdms Elastomers: Influence Of Filler Loading And Particle Type, Madison Procyk

College of Graduate Studies: Theses & Dissertations

Magnetorheological elastomers (MREs) offer a promising pathway for soft, magnetically actuated drug‑delivery systems, yet material‑selection guidelines remain unclear due to limited comparative data across particle chemistries, size scales, and concentrations. This study systematically evaluates how magnetic filler type (carbonyl iron and magnetite) and particle size (micro vs. nano), at two weight percentages – 40 wt% and 50 wt% – in Sylgard 184 PDMS influence the viscoelastic behavior of MREs intended for compliant biomedical actuation. Eight particle formulations were prepared through sieving, controlled mixing, vacuum degassing, and isotropic curing, producing nineteen total specimens (16 with filler particles and 3 without). Dynamic …

Influence Of The Sst K-Ω Stress-Limiter Coefficient On Transonic Shock Buffet Prediction For The Oat15a Supercritical Airfoil, Melinawo Vowotor

College of Graduate Studies: Theses & Dissertations

Transonic shock buffet predictions using the Shear Stress Transport (SST) k–ω turbulence model are known to be sensitive to the stress-limiter coefficient a₁, yet no systematic investigation of this sensitivity exists. This thesis presents a parametric study of a₁ for two-dimensional URANS simulation of shock buffet on the OAT15A supercritical airfoil at M = 0.73 and Re = 3 × 10⁶. Eleven a₁ values (0.25–0.37) are examined at α = 3.5°, and a matrix of five a₁ values across five angles of attack (3.0°–3.9°) maps the interaction with incidence. The results reveal that a₁ acts as a bifurcation parameter: a …

Network-Aware Airline-Specific Flight Delay Prediction Using Tree-Based Ensemble Models, Mary Dufie Afrane

College of Graduate Studies: Theses & Dissertations

Flight delays pose persistent challenges to the efficiency and reliability of air transportation systems, affecting airlines, airports, regulators, and passengers alike. As traffic demand grows and operational environments become increasingly interconnected, accurately predicting both departure and arrival delays has become crucial for effective planning and mitigation. This study presents a network-aware, airline-specific framework for predicting flight delays in U.S. domestic air transportation systems using tree-based ensemble machine learning models. A large-scale dataset of 1.98 million flights, enriched with weather information, is used to develop predictive models for both departure and arrival delays. To capture the structural and operational complexity of …

Sustainable Safety Planning On Two-Lane Highways: A Random Forest Approach For Crash Prediction And Resource Allocation, Fahmida Rahman, Cidambi Srinivasan, Xu Zhang, Mei Chen

Civil Engineering Faculty Publications

During the safety planning stage, accurate crash prediction tools are critical for prioritizing countermeasures and allocating resources effectively. Traditional statistical approaches, while long applied in this field, often depend on distributional assumptions that may introduce bias and limit model accuracy. To address these issues, studies have started exploring Machine Learning (ML)-based techniques for crash prediction, particularly for higher functional class roads. However, the application of ML models on two-lane highways remains relatively limited. This study aims to develop an approach to integrate traffic, geometric, and critically, speed-based factors in crash prediction using Random Forest (RF) and SHapley Additive exPlanations (SHAP) …

Detection And Management Of Attacks On Synchronized Networks, Michael T. Spearman

Honors Theses and Capstones

The Precision Time Protocol (IEEE 1588) provides sub-microsecond clock synchronization across packet-switched networks and has become foundational infrastructure in 5G fronthaul, industrial control systems, and financial exchanges. Despite its criticality, most deployed PTP networks operate without active security monitoring, and no standardized detection mechanism exists for the class of attacks that deliberately stay below conventional jitter thresholds. This thesis investigates whether hardware-level ptp4l offset logs alone are sufficient to reliably detect two such attacks, slowly wandering packet delay injection and rogue master spoofing, and whether detection can occur before severe synchronization failure.

A hardware-in-the-loop testbed was constructed using two hosts …