Digital Commons Network^™

Ion-Imprinted Polymer-Based Sensors For Toxic Metal-Ion Detection In Water: Coordination Chemistry, Transduction Strategies, And Environmental Applications, Ghita Yammouri, Gymama Slaughter

Center for Bioelectronics Publications

Toxic metal contamination in aquatic environments remains a persistent threat to human health and ecosystems. Yet, the high cost, infrastructure demands, and centralized nature of conventional analytical methods constrain routine monitoring. Ion-imprinted polymers (IIPs), a subclass of molecularly imprinted polymers, have emerged as promising synthetic recognition materials for metal-ion sensing because they generate coordination-defined binding sites with high selectivity, chemical stability, low cost, and reusability. This review summarizes recent advances in Ion-imprinted polymer (IIP)-based sensing technologies for toxic metal-ion detection in water from 2016 to 2026. It examines the fundamental recognition chemistry of IIPs, major synthesis strategies used to generate …

Stiffening Of Soft Silicone Upon Deep Uv Treatment As Characterized Using Nanoindentation, Amanda Wilder, Zaria Booth, Caden Obermeyer, Saika Sharmin, Venkat Maruthamuthu

Mechanical & Aerospace Engineering Faculty Publications

Silicones are elastomers that have a wide variety of uses, including biomedical applications such as the coating of biomedical devices and as implants. Soft silicones with mechanical properties similar to those of biological tissues have particularly gained use as substrates for cell culture in mechanobiology studies. In this context, it would be desirable to be able to alter their surface mechanical properties with a relatively simple physical treatment. While deep ultraviolet (deep UV) or ultraviolet C (UV-C) treatment has been previously used as a surface treatment method for stiffer silicones formulations, the effect of this treatment on soft silicones relevant …

Effect Of Ionic Strength On Gelation Time And Strength Of Amps-Based Polymer Gels, Maryam Sharifi Paroushi, Xuyang Tian, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Polymer gel treatment has been widely applied for improving sweep efficiency and controlling excessive water and gas production. Their performance depends on gelation time and final gel strength. In most studies, brine salinity is used to describe the effect of formation water on gel behavior. However, changing salinity also changes ionic strength and ion composition at the same time. Because of this coupling, it is difficult to identify the mechanisms controlling gelation, which has led to inconsistent trends in the literature. Increasing salinity has been reported to either slow or accelerate gelation and to weaken or strengthen gels depending on …

Cross-Linking Peg Microgels With Mesoporous Organosilica Nanoparticles To Engineer Microporous Annealed Particle Scaffold Properties, Jonathan M. Zuidema, Alessandro Ajo, Marco Carofiglio, Luisa De Cola

Mechanical Engineering Faculty Publications

Microporous annealed particle (MAP) scaffolds composed of cross-linked microgels are emerging as important biomaterials due to their modular design, high porosity, and large surface area, which allow for highly tailored properties, cellular infiltration, nutrient and waste exchange, and improved drug release characteristics. To further expand on these technologies and enhance their modular design, thiolated mesoporous organosilica nanoparticles (ssMSN-SH), which degrade in response to glutathione, were first cross-linked inside of 4-arm poly(ethylene glycol) maleimide microgels. The microgel size, rheological properties, and payload release characteristics were determined. Hierarchical MAP scaffolds were then created by cross-linking 4-arm poly(ethylene glycol) maleimide microgels with ssMSN-SH. …

Data Set, R Scripts And Script Outputs For Manuscript: Manufacturing Systems: Characteristics And Dynamics, Alan J. Fitzmorris

Graduate Research Data

This file repository contains fifteen computer-generated datasets, two naturally occurring datasets, nineteen shipbuilding shop datasets, and sixty-one concrete plant datasets.  Each data set contains subdirectories associated with various aspects of the data analysis, including stationarity analysis, dynamic system analysis, and complexity analysis.  In each case, applicable R scripts are included.  The text file entitled “Directory_and_File_Names” depicts the directory structure and associated file names for a total of 225 directories encompassing 8008 files.

Effects Of Matched Freespace And Wall Damping On Stiffness Perception, Madeleine Toland, M Bourgeois, Emma Treadway

Engineering Faculty Research

Stiffness perception has previously been shown to be influenced by damping. This work addresses open questions about what damping conditions are best for enabling classification of virtual walls by their stiffness. Through a forced-choice classification experiment with 12 participants, we found that the highest mean classification performance (in terms of both information transfer and percent correct responses) occurred when freespace damping matched wall damping, rather than being higher or lower. However, statistically significant differences did not appear between the closest damping values employed, suggesting that the effects do not become pronounced until the damping is quite mismatched.

Work In Progress: The Impact Of Classroom Interventions On Student Success And Retention In Electric Circuits, Cherian Mathews

All Faculty Articles - School of Engineering and Computer Science

University of the Pacific has embarked on a university-wide endeavor to improve student success and retention. This effort involves academic coaches being placed in each unit, early grade reporting in the fifth week of the semester, follow-ups by faculty advisors and academic coaches for struggling students, and documentation of interactions with such students in the university CRM system. These follow-ups with students typically involve conversations to explore factors contributing to poor performance (e.g., health issues, excessive work hours, study skills), suggesting approaches to improve performance, and making referrals to care teams and supplemental instruction. Despite all these efforts, DFW rates …

Ai For Life Sciences: From Geometric Protein Modeling To Multimodal Drug Design, Feng Jiang

Computer Science and Engineering Dissertations

Predicting biomolecular interactions, from immune recognition to drug–target binding, is a central problem in the life sciences and computational drug discovery. Deep learning has advanced this area, yet three challenges persist: the topology of large, highly imbalanced interaction networks; structural noise in computationally predicted protein models; and the integration of multimodal information such as functional text and taxonomic annotations. This dissertation develops a coherent set of models spanning immune complex prediction and small-molecule drug design: graph learning that addresses network topology and severe class imbalance; a noise-tolerant method that fuses predicted structures with evolutionary sequence features; and multimodal representation learning …

Navigating The Intersection Of Faa Grant Assurances And Environmental Regulations: Assessing Impacts On Airport Sustainability Efforts, Chad D. Richards

Senior Honors Theses and Projects

Airports in the United States operate within a very complicated regulatory environment that is shaped by federal aviation policy, environmental and state laws, and promises made to the federal government through sponsor assurances, also known as grant assurances. As environmental concerns surrounding aviation continuously grow, airports have been increasingly implementing sustainability initiatives aimed at reducing emissions and improving energy efficiency. Implementing these initiatives is often influenced by regulatory frameworks governing airport operations and infrastructure development. The goal is to examine how federal regulatory structures influence sustainability initiatives at U.S. airports by using a qualitative case study approach to examine sustainability …

Impact Of In-Cabin Human Machine Interface Designs On Passenger Trust In Urban Air Mobility, Ricole A. Johnson, Erika E. Gallegos

Journal of Aviation/Aerospace Education & Research

Urban Air Mobility (UAM) presents a promising solution for alleviating urban traffic congestion and enhancing transportation efficiency. However, the widespread acceptance of UAM, particularly sustained ridership of autonomous passenger air vehicles (PAVs), is contingent upon addressing critical human factors for building passenger trust, especially in the absence of a human pilot. This paper evaluates how different in-cabin human-machine interface (HMI) designs affect passenger trust in the aircraft and in-cabin display, situation awareness, and pilot preferences. Forty participants, equally split between early and late technology adopters, completed two simulated flights: a baseline flight with no HMI and a second flight featuring …

The Role Of User Experience In Virtual Reality Flight Training: A Comparison With Pc-Based Simulation, Tianxin Zhang, Christina M. Frederick, Barbara Chaparro

Journal of Aviation/Aerospace Education & Research

The current project explores how user experience (UX) in virtual reality (VR) flight simulation influences both cognitive learning outcomes and procedural skill acquisition when compared to traditional desktop-based simulation.. Using a quasi-transfer of training design, 48 student pilots were randomly assigned to VR, Desktop, or Control groups and trained on the Chandelle maneuver. UX was measured with the User Experience Questionnaire (UEQ), while training effectiveness was evaluated through a post-training knowledge test and recorded maneuver performance on a high-fidelity flight training device. Results indicated that the VR group reported significantly higher UX scores in Attractiveness, Stimulation, and Novelty, and showed …

Soil Freezing Characteristic Surface For Partially Frozen Soils, Antai Dong, Xiong Zhang, Ming Xiao

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The soil freezing characteristic curve (SFCC), which relates unfrozen water content to temperature, is a fundamental constitutive relationship in frost heave simulations. However, the influence of soil suction, another critical state variable, is often neglected. This study highlights how the SFCC is significantly affected by suction conditions, with unfrozen water content varying markedly between saturated (suction = 0) and completely dried (suction = ∞) conditions at the same subfreezing temperature. Recognizing this limitation, the concept of the soil freezing characteristic surface (SFCS) is proposed to incorporate the impacts of both temperature and suction on unfrozen water content. After that a …

Managing And Accelerating The Circular Economy Transitions Within The Construction Value Chain Using Network Governance And Game Theory Systems Perspectives, Radwa Eissa, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The fragmented nature of the construction industry has hindered its transition toward circular economy (CE) practices. While game theory (GT) has been successfully applied to support the strategic decisions of CE transitions in other sectors, CE-GT models in the construction domain remain extremely limited. This paper addresses two research questions: (1) how are CE network governance activities currently modeled using GT across domains? (2) How can such models be transferred and adapted to solve strategic interactions within the construction value chain in a manner that enables CE practices to emerge as equilibrium outcomes? These questions are driven by the need …

Carbonated Blast-Furnace Slag As Supplementary Cementitious Material: Phase Transition And Effect On Cement Hydration, Gao Deng, Nannan Zhang, Wenyu Liao, Yongjia He, Linnu Lu, Lingyu Chi, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Blast-furnace slag, which contains high levels of CaO (and MgO), holds potential as a feedstock for CO₂ capture and storage. This study investigates the phase transitions occurring during the wet carbonation of ground granulated blast-furnace slag (GGBFS), characterizes the physical and chemical properties of carbonated GGBFS (CS), evaluates its pozzolanic reactivity, and examines the microstructure and performance of cement pastes blended with GGBFS or CS. The findings reveal that aragonite and calcite, the primary carbonation products, precipitate on the surface of GGBFS, hindering its dissolution and thereby reducing both the pozzolanic reactivity and the early strength of cement pastes. …

Data For: Optimizing Finite Structures To Suppress The Photonic Density Of States, Prakash Mishra, Sukhad Dnyanesh Joshi, Quintin A. Hatzis, Aditya Bahulikar, M. Cenk Gursoy, Rodrick Kuate Defo

Electrical Engineering and Computer Science - All Scholarship

We propose a topology-optimization framework for optimizing finite structures of arbitrary shape by combining density-based methods with level-set approaches. We first optimize regular polygonal structures to suppress the photonic density of states and find that the best performing polygon is consistent with a tiling of space with hexagonal unit cells. We next show that introducing cavities into hexagonal structures further suppresses the photonic density of states, particularly when the cavity is also hexagonal. Such a result would find application in the design of fiber-optic cables. We then describe an approach for optimizing arbitrary x-simple or y-simple designs that can recover …

Localized Air Pollution Impacts From Data Centers In Northern Virginia, Damian Pitt, Ivan Suen, Ellie Plisko

Institute for Sustainable Energy and Environment Publications and Presentations

This report examins the extent of air pollution emissions resulting from the use of backup generators at data centers in Northern Virginia, including both actual current emissions and potential future emissions, and how those emissions totals compare to other sources of air pollution in the Northern Virginia region. It also examines how exposure to data center emissions correlates with demographic characteristics such as race, income, and education.

We while the air pollution emissions from individual data centers is minor, the collective impact from the 100+ such facilities in the Northern Virginia region is significant. Notably, the cumulative emissions exposure in …

Ransomware As Organization: A Comparative Analysis Of Corporate And Criminal Structures In Conti, George Urling

Theses, Dissertations and Capstones

Cybercriminal groups continue to pose major threats to global cybersecurity. One of the most common types of cybercriminal groups are, “Ransomware-as-a-Service (RaaS)" groups, who create and sell ransomware. While research is conducted into the development of ransomware, there is limited reporting on the organizational structure and habits of RaaS groups. In 2022, prominent RaaS group Conti had their chat logs leaked, with the logs ranging from 2020 to 2022. This study seeks to provide a deeper understanding of RaaS group structures by utilizing the Conti leaked logs as a case study. The study, entitled “Ransomware as Organization: A Comparative Analysis …

A Macrocognitive Design Taxonomy For Simulation-Based Training Systems: Bridging Cognitive Theory And Human-Computer Interaction, Jessica M. Johnson

Virginia Digital Maritime Center (VDMC) Faculty Publications

Simulation-based training systems are increasingly deployed to prepare learners for complex, safety-critical, and dynamic work environments. While advances in computing have enabled immersive and data-rich simulations, many systems remain optimized for procedural accuracy and surface-level task performance rather than the macrocognitive processes that underpin adaptive expertise. Macrocognition encompasses higher-order cognitive processes that are essential for performance transfer beyond controlled training conditions. When these processes are insufficiently supported, training systems risk fostering brittle strategies and negative training effects. This paper introduces a macrocognitive design taxonomy for simulation-based training systems derived from a large-scale meta-analysis examining the transfer of macrocognitive skills from …

Stentrx, Emma Barna, Minuthi Cooray, Bruce Newlands, Joseph A. Sabetta

Williams Honors College, Honors Research Projects

This project aims to develop a biodegradable, drug-eluting biliary stent for the treatment of biliary cancers. Current metal stents that restore bile flow bit are non-degradable, prone to migration, and unable to deliver drugs locally. The proposed stent will be biocompatible, biodegradable, and capable of controlled drug release to both maintain bile flow and treat tumors. The end goal is to produce a functional prototype that can be deployed via a minimally invasive catheter and maintain bile duct patency for at least three months. The project is expected to be involved in the NEOMED Bench-to-Bedside competition and provisionally patented.

Goal-Driven Shared Control In Eeg-Based Brain Machine Interface For Freewill Reaching And Grasping With Movement Intention Detection And Goal Position Decoding, Bhoj Raj Thapa

Theses and Dissertations--Electrical and Computer Engineering

Upper limb motor impairments can severely limit a person’s ability to perform everyday reaching and grasping tasks. Electroencephalogram (EEG)-based brain machine interfaces (BMIs) offer a non-invasive approach for translating neural activity into control signals for assistive devices such as robotic arms. However, traditional EEG-based BMI studies have generally focused on externally cued paradigms, where both movement timing and target selection are specified by the experimenter rather than freely chosen by the user. In addition, shared control offers a practical framework for assistive BMI operation by dividing responsibility between the user and the intelligent robotic system. However, in many EEG-based shared …

Ai-Driven Network Orchestration: Adaptive Routing For Federated Learning Over Software-Defined Hybrid Wans, Osama Abu Hamdan

Computer Science and Engineering Dissertations - Archive

Modern wide-area networks increasingly adopt hybrid architectures that combine high-capacity wired backbones with flexible wireless links to extend connectivity to remote and underserved locations. However, the bandwidth variability inherent in wireless segments creates routing challenges that traditional protocols, designed for static link capacities, cannot adequately address. Simultaneously, Federated Learning (FL) has emerged as a privacy-preserving distributed machine learning paradigm in which geographically dispersed clients collaboratively train shared models without exchanging raw data. When deployed over wide-area networks, FL training is severely bottlenecked by communication overhead, particularly in cross-silo settings where model payloads reach hundreds of megabytes and synchronous aggregation protocols …

Microwave Synthesis And Characterization Of Fe2ptge Nanoparticles, Ally T. Fennell, David Carnevale

Chemistry Theses

Magnetic, semiconductor, and spintronic materials are vital to the functionality of devices from household appliances and sensors to medical and computing systems. This study discusses a novel synthesis and characterization of nanoscale Fe₂PtGe nanoparticles. The material was synthesized using microwave irradiation (175oC, 5 minutes) and characterized using XRD, XRF, TEM, and VSM. XRD of the synthesized particles correlates to a cubic crystal structured, indicating a face-centered cubic (fcc) platinum structure with iron and germanium incorporated in a disordered manner. XRF confirms the presence and relative ratios of iron, platinum, and germanium species. TEM imagery shows spherical nanoparticles with an average …

Rope Cutting Task Module, Rebecca Usher

Engineering Theses

This project focuses on the design and evaluation of a rope-cutting module for use with robotic platforms developed by New England Robotics Validation and Experimentation Center (NERVE) and the University of Massachusetts Lowell. The system is designed to cut nylon rope using a specialized robotic cutting arm that can be attached to the robot.

The system consists of a module task box that has two pegs that hold two arms to each one. One arm where the spring- mechanism inside of the task module and the second arm the one on top of the box hold the string in place …

Moisture Performance Of Coated Cross-Laminated Timber Under Coastal Conditions In Vertical And Horizontal Orientations With And Without Weather And Vapor Resistive Barriers, Mia Raley

Engineering Theses

Rhode Island is experiencing sea level rise, and more flooding and erosion during storm events due to climate change. The Rhode Island construction industry wants to adopt mass timber, but have concerns with the changing coastal environment on cross-laminated timber (CLT) wall and slab panels. This research aims to understand how coastal conditions affect CLT under different protection conditions, panel orientations, and structure type, by collecting moisture and temperature data on two structures, one commercially-fabricated and one laboratory-fabricated, located on Shell Path from early-July to early-April. Results found that all layers of horizontally-oriented panels benefitted from an additional protective weather-resistant-barrier …

Improving Ground Penetrating Radar Calibration For Chloride Assessment In Reinforced Concrete Bridge Decks, Camila Silva Wendland

Engineering Theses

This study investigates how ground penetrating radar (GPR) can be used to estimate chloride content in reinforced concrete bridge decks. Chloride buildup at the rebar level can lead to corrosion and structural damage, but current testing methods are destructive and limited to small sample areas. GPR offers a non-destructive alternative, but interpreting reflection amplitudes is challenging because they are affected by multiple factors, including moisture content and rebar depth. To address this, a simulation-based calibration method was developed. Finite-difference time-domain simulations were used to study how chloride, moisture, and rebar depth influence GPR reflection amplitudes. A depth correction method was …

A Dual-Domain Face Forgery And Deepfake Detection Framework, Neha Pradyumna Bora, Pradyumna Mulchand Bora, Rushikesh Sanjay Kumavat, Raunak Manoj Gangwal, Prit Sandesh Jain, Hardik Vijay Ostwal

Mansoura Engineering Journal

Concerns about media authenticity, privacy, and information security arising from rapid advances in deepfake technology have made it increasingly important to detect manipulated facial content reliably. The primary goal of our work was to develop a deepfake detection model with high generalization across multiple datasets. To achieve this, we developed a hybrid detection approach that combines spatial visual texture analysis and frequency-domain analysis to detect manipulated facial images. Our approach includes convolutional spatial feature extraction from facial images and frequency—domain representations of the same images obtained by applying the fast Fourier transform. To help alleviate concerns about overreliance on frequency—domain …

Investigating The Dynamic Rating Method: Effects Of Flood Wave Geometry On Discharge Estimation, Daniel James Read

Masters Theses

Rating curves are a vital tool to convert from observed stage to discharge in streamflow monitoring. Most gaging sites utilize a simple rating curve, which assumes a monotonic relationship between stage and discharge. In most cases, this assumption is valid; however, dynamic effects of flood waves often cause significant error in discharge estimation for mildly sloped streams. The dynamic rating method utilizes a numerical solution of the St. Venant Equations applied to time series stage data to compute discharge. Within this method, there is a flood wave parameter called the flood wave factor. The researchers designed a formal computational model …

Calcium Based Carbon Negative Fillers And Additives: Effects On Hydration And Performance Of Low-Carbon Cement Systems, Smita Bhowmick Shithi

Masters Theses

Cement production is a major source of global CO₂ emissions creating an urgent need for carbon-negative fillers and functional additives that lower clinker use while maintaining cement performance. This thesis investigates the effects of organic mineral salts as fillers and additives on cement hydration, fresh properties, compressive strength and pore structure. In the first study, ordinary Portland cement (OPC) was partially replaced with calcium carbonate or calcium oxalate to enable a direct comparison under controlled particle size distribution (PSD). Rheology, flowability, hydration kinetics, phase evolution, mechanical performance and water absorption were evaluated. Calcium carbonate promoted early hydration through nucleation and …

Assessment Of Simulation Software Used For Cubesat Gnc Verification And Validation By University Research Teams, Alexander Taiyo Newett

Masters Theses

As the growth in university satellite teams continues, along with the greater trend in the small satellite market, the need for a guidance, navigation, and control verification and validation pipeline suitable for these young and inexperienced teams becomes evident. Much of the mathematical theory and software implementation of GNC concepts are large hurdles for teams largely composed of undergraduate students.

Many software packages exist that can help these teams achieve GNC verification and validation. If the learning curves of these software packages can be overcome, new satellite teams have the opportunity to better build and test GNC algorithms that are …

Public Preferences And Trade-Offs In Critical Mineral Mining Development In The United States, Bamidele Joseph Ajiga

Masters Theses

Rising demand for battery-critical minerals has increased U.S. mining efforts, but projects often face public opposition. There is limited work on how individuals in affected regions evaluate trade-offs between economic and environmental risks.

This research applies a discrete choice experiment to examine individual preferences for proposed battery-critical minerals mining projects in Missouri, Minnesota, and Idaho. 1908 respondents evaluated hypothetical mining projects defined by jobs, state tax revenue, the proportion of tailings reprocessed, groundwater impacts, and surface water impacts, under gold and silver versus battery-critical mineral framings.

Conditional and mixed logit models were used to assess the importance of attributes, demographic …