Digital Commons Network^™

The Design And Construction Of An Electronic D-C Analog Computer, Frederick R. Wagner, William A. Paar

Masters Theses

"To make this project realizable with the funds available and in the time allowed, and to set forth some definite goals, the following objectives were adopted:

1. Design, construct, and place in working order a d-c electronic analog computer capable of solving 4th order linear differential equations with constant coefficients.
2. Include in the design provisions for real time computation, and also fast, repetitive operation.
3. Provide for later expansion of the computer installation.
4. Limit expenditures to $700"--Introduction, page 4.

Deposition Of Metallic Coatings From Fused Salt Baths, Andrew Hessler Larson

Masters Theses

"This thesis is the result of an investigation undertaken to study some of the important factors affecting the deposition of metallic diffusion coatings on other metals immersed in a fused salt bath….

There are many methods which have been devised to obtain diffusion coatings on various metals. One which is quite well known and used commercially is the process of “chromizing” which produces a diffusion layer if chromium on another metal. One method of “chromizing” consists of immersing the specimen to be coated in a mixed chloride fused bath containing chromium metal flakes. Another method consists of packing a low …

Effect Of Carbon Content In Steels Upon The Deposition Of Titanium From A Fused Salt Bath, Reinhard Paul Abendroth

Masters Theses

"STATEMENT OF PROBLEM Previous work done at the Missouri School of Mines and Metallurgy on the deposition of titanium upon various metals, especially iron and steel, bas shown that titanium can be deposited upon ingot iron and. low carbon steels with comparitive ease. Difficulty was encountered in attempts to deposit titanium upon steels of higher carbon content and upon cast irons.

For this reason, it was decided to investigate more thoroughly the relationship between the carbon content of various steels and the quality of titanium coatings deposited on these steels. Once this relationship had been established, a suitable theoretical explanation …

Corrosion Products Of Titanium In Fused Salt Baths, Kai-Chai Chiou

Masters Theses

"Titanium is gaining great interest in the modern metal industry because of its natural abundance and its desirable physical and chemical properties. Among them, its excellent corrosion resistance, such as the resistance to normal atmosphere attack, humid and saline atmosphere attack, sea water attack, and nitric acid attack, is the most prominent characteristic being welcomed by the engineers. The usefulness of titanium would be greatly increased if it were possible to plate titanium on other metals, thus increasing the corrosion resistance of these other metals.

Much concern, at present, has been given to the possibilities of the electrodeposition of titanium …

The Steel Industry Of India: Its Historical Background And Present Development, Glenn Kaufmann

University of the Pacific Theses and Dissertations

Ancient India was reported to produce excellent iron products that were prized in all parts of the world. Not only did she make swords, plow points, and other products necessary for the useful arts, but also ornaments such as ear and finger rings, and iron ornaments to beautify her buildings. India today, though to a lesser degree, is still carrying on the tradition of hand-made iron ornaments, by using the ancient method of smelting and processing. Indian wootz, a product similar to steel, was the best iron product made in olden times, and only India's failure to develop new and …

An Investigation Of The Characteristics Of High Alumina Refractory Castables, Gajendra Nath Mohanty

Doctoral Dissertations

"Refractory castables or concretes, a comparatively new member of the refractories family, are an admixture of highly aluminous cements and graded refractory aggregates, blended in predetermined proportions very much like structural concrete. The refractory aggregates must contain a large amount of fines contrary to the requirements of ordinary concrete. Unlike the Portland cements, which are mainly combinations of calcium silicates, the highly aluminous cements are predominantly calcium aluminates. They are comparatively of a refractory natures, having the hydraulic setting property combined also with high early strength. The discovery of the fact that these refractory concretes could be cast, in situ, …

The Rate Of Dissolution Of Aluminum In Hydrofluoric Acid, Yen-Ngen Wang

Doctoral Dissertations

"Pure aluminum has a relatively low strength, and its use is, therefore, rather limited. However, the resistance of pure aluminum to the attack of acids and many neutral solutions is higher than that of less pure aluminum or most of the aluminum-base alloys. For this reason, alclad alloy sheets, are made with a coating of pure aluminum on one or both sides of an aluminum alloy core. The coating is metallurgically bonded to the core over the entire area of contact. Thus the coating electrochemically protects the core from corrosive attack.

Aluminum is more negative in the electrochemical series than …

Hydrogen Overvoltage On Titanium, Sheng-Tai Shih

Doctoral Dissertations

"The hydrogen overvoltage has been defined as the difference between the potential of the working electrode (cathode) and the theoretical reversible value for the same solution. This definition brings out the difficulty involved in the measurement of the "theoretical reversible potential for the same solution” as the potential of the hydrogen electrode in such a solution is usually different from the value of a standard reversible hydrogen electrode, for which the activity of hydrogen ions is set as being “1” and the potential arbitrarily set as being “0”. Besides, it is sometimes necessary to add addition agents to the solution …

A Study Of The Deformation Texture And Its Variation In Cold Drawn Nickel Rods, Krishan Kumar Tangri

Doctoral Dissertations

"The production of rods by cold drawing is a development of recent years as compared to other methods of fabrication. Though a good many investigations correlating the observed mechanical properties to the mill practices employed have been reported, the results nevertheless are more of a qualitative and empirical nature. It is well known that the physical properties of a metal product are related to its deformation textures which are characteristic of the metal and the fabricating method used. Thus a study of the deformation textures of cold-drawn rods, specially by x-ray diffraction techniques should provide a much more precise and …

Carbon Monoxide Attack Of Refractories, William A. Frad

Doctoral Dissertations

"The disintegration and failure of fire clay refractories due to the action of carbon monoxide has been studied tor a period at about fifty years. The most important application is in blast furnace refractories. Similar failures due to carbon deposition, involving other gases such as methane, have been noted and less extensively studied. Failures due to the action of gases other than carbon monoxide are beyond the scope of this thesis. Occasional attempts to find some agent to prevent disintegration have been mentioned in the literature. In this study the number of such substances and the results of their action …

Evaluation Of Traffic Paints In 1953, James H. Havens

Kentucky Transportation Center Research Report

This report documents the performance data obtained by the Research Labratory in connection with field service tests and laboratory tests on traffic paint samples submitted by prospective suppliers for 1954. On the basis of these data and the adjudged performance of the samples offered, invitations to bid will be issued to any or all suppliers offering worthy materials. (See Division of Purchases's Memorandum of January 7, 1953 in Appendix) Winning bidders should be bound by oath to supply the same formulation of materials as furnished in the qualifying samples, and they should be further bound by such tests and analyses …

Report No. 1 On A Water-Bound, Dense-Graded Aggregate Base, Ellis G. Williams

Kentucky Transportation Center Research Report

Favorable experience with dense-graded bases containing calcium chloride created interest in similar mixtures containing only water as a bonding agent. As a result of this interest, a project for base and surface construction was set up on the Phil-Pine Grove Road in Casey County to permit study of this method of base construction. The work was carried out during the period of August to October, 1953.

The pavement, which is 11.62 mi. long, was constructed by contract. It had 2 in. of traffic-bound base (creek gravel) and appeared to be in rather uniform condition with few obviously weak areas. Courses …

Report No. 1 On Vibratory Compaction Of Macadam Base, Ellis G. Williams

Kentucky Transportation Center Research Report

No abstract provided.

Traffic Paint Service Tests For 1954, Kentucky Highway Materials Research Laboratory

Kentucky Transportation Center Research Report

This report documents the performance data obtained by the Research Laboratory in connection with field service tests and laboratory tests on traffic paint samples submitted by prospective suppliers for 1954. On the basis of these data and the adjudged performance of the samples offered, invitations to bid will be issued to any or all suppliers offering worthy materials. (See Division of Purchases's Memorandum of January 7, 1953 in Appendix) Winning bidders should be bound by oath to supply the same formulation of materials as furnished in the qualifying samples, and they should be further bound by such tests and analyses …

Comprehensive City Plan Of Vero Beach, Florida, George W. Simons Jr

City and Regional Planning -- Florida

This report contained a comprehensive city plan to develop and expand Vero Beach, Florida in 1953

Test 515: David Bradley Super Power, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST B: The throttle …

Test 511: Allis-Chalmers Wd-45 (Distillate), Nebraska Tractor Test Lab

Nebraska Tractor Tests

This report and any related files are made available to the online through the Lester F. Larsen Tractor Test and Power Museum as resources allow. Established in 1998, this museum is located on the University of Nebraska-Lincoln East Campus. It is and appropriately housed within the walls of the historic 1920 Nebraska Tractor Test Laboratory, where the first tractor test was started on March 31st, 1920. Because the pioneer tests became worldwide standards, this location was designated as a Historic Landmark of Agricultural Engineering by the American Society of Agricultural Engineers in 1980, shortly after testing was moved to a …

Test 512 Allis-Chalmers Wd-45 Lp Gas, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: Allis-Chalmers WD-45 LP GAS TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker, point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS …

Test 509: Massey-Harris 33-Rt, Nebraska Tractor Test Lab

Nebraska Tractor Tests

This report and any related files are made available to the online through the Lester F. Larsen Tractor Test and Power Museum as resources allow. Established in 1998, this museum is located on the University of Nebraska-Lincoln East Campus. It is and appropriately housed within the walls of the historic 1920 Nebraska Tractor Test Laboratory, where the first tractor test was started on March 31st, 1920. Because the pioneer tests became worldwide standards, this location was designated as a Historic Landmark of Agricultural Engineering by the American Society of Agricultural Engineers in 1980, shortly after testing was moved to a …

Test 510: Massey-Harris 44 Special, Nebraska Tractor Test Lab

Nebraska Tractor Tests

This report and any related files are made available to the online through the Lester F. Larsen Tractor Test and Power Museum as resources allow. Established in 1998, this museum is located on the University of Nebraska-Lincoln East Campus. It is and appropriately housed within the walls of the historic 1920 Nebraska Tractor Test Laboratory, where the first tractor test was started on March 31st, 1920. Because the pioneer tests became worldwide standards, this location was designated as a Historic Landmark of Agricultural Engineering by the American Society of Agricultural Engineers in 1980, shortly after testing was moved to a …

Test 508: Case 500, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker, point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST B: The throttle …

The Application Of Electric Energy To The Metallurgy Plants In Montana, Edwin J. Duncan

Bachelors Theses and Reports, 1928 - 1970

Since the year 1800, metallurgy has been affiliated with electricity. In fact, the two industries have grown side by side, being naturally dependent upon each other and having a parallel growth.

Test 507: John Deere 50 All-Fuel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere 50 All-Fuel TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS …

Test 506: John Deere 70 All-Fuel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere 70 All-Fuel TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS …

Test 503: John Deere 40, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere 40 TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST …

Army Technical Intelligence Organizations, 1953, Robert Bolin , Depositor

United States Department of Defense Military Intelligence

In 1953, the production of technical intelligence was the responsibility of the chiefs of the Army technical services. The technical services were bureaus in the Headquarters, Department of the Army, each headed by a general. In 1953, the technical Services were:

• The Army Medical Service headed by The Surgeon General
• The Chemical Corps headed by the Chief Chemical Officer
• The Corps of Engineers headed by the Chief of Engineers
• The Ordnance Corps headed by the Chief of Ordnance
• The Quartermaster Corps headed by the Quartermaster General
• The Signal Corps headed by the Chief Signal Officer
• The Transportation Corps headed by …

Test 504: John Deere 40 S, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere 40 S TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS …

Test 505: John Deere 40 C, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere 40 C TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS …

Test 502: Willys Farm Jeep, Nebraska Tractor Test Lab

Nebraska Tractor Tests

This report and any related files are made available to the online through the Lester F. Larsen Tractor Test and Power Museum as resources allow. Established in 1998, this museum is located on the University of Nebraska-Lincoln East Campus. It is and appropriately housed within the walls of the historic 1920 Nebraska Tractor Test Laboratory, where the first tractor test was started on March 31st, 1920. Because the pioneer tests became worldwide standards, this location was designated as a Historic Landmark of Agricultural Engineering by the American Society of Agricultural Engineers in 1980, shortly after testing was moved to a …

Test 501: New Fordson Major, Nebraska Tractor Test Lab

Nebraska Tractor Tests

This report and any related files are made available to the online through the Lester F. Larsen Tractor Test and Power Museum as resources allow. Established in 1998, this museum is located on the University of Nebraska-Lincoln East Campus. It is and appropriately housed within the walls of the historic 1920 Nebraska Tractor Test Laboratory, where the first tractor test was started on March 31st, 1920. Because the pioneer tests became worldwide standards, this location was designated as a Historic Landmark of Agricultural Engineering by the American Society of Agricultural Engineers in 1980, shortly after testing was moved to a …