Digital Commons Network^™

The Use Of Electrical Resistance Strain Elements In Three-Dimensional Stress Analysis, Robert I. Brasier

Electrical and Computer Engineering ETDs

The purpose of this thesis is to present a new method of experimental stress analysis and to give the solution to a problem which has been handled by this method.

Test 654: Ford 851-D, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker, point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST B: The throttle …

Test 653: Ford Model 841 (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

This report and any related files are made available to the online through the Lester F. Larsen Tractor Test and Power Museum as resources allow. Established in 1998, this museum is located on the University of Nebraska-Lincoln East Campus. It is and appropriately housed within the walls of the historic 1920 Nebraska Tractor Test Laboratory, where the first tractor test was started on March 31st, 1920. Because the pioneer tests became worldwide standards, this location was designated as a Historic Landmark of Agricultural Engineering by the American Society of Agricultural Engineers in 1980, shortly after testing was moved to a …

Metallurgical Applications Of Polarized Light, Kenneth R. Evans

Bachelors Theses and Reports, 1928 - 1970

Very little has been written concerning the theory of the metallurgical polarization microscope. Records of metallurgical studies utilizing this instrument are widely scattered among the literature, and are mostly material of an uncoordinated and irrelevant nature. It is the feeling of the author that a coordinated investigation of the metallurgical applications of polarized light will yield results providing the metallurgist with another means for the study of metals and their properties.

An Evaluation And Summary Of The 16-Year Performance Of A Concrete Test Pavement, Milton Evans Jr.

Kentucky Transportation Center Research Report

Presented herein are a summary and evaluation of the performance of a reinforced concrete section of U.S. 27 in north central Kentucky which has been in existence since the summer of 1941. The pavement, totaling 7.89 miles, was constructed in 10 experimental test sections, as shown on the layout map in Figure 1. Five blends of cement, containing normal portland, natural, and two additives, were used with two types of coarse aggregate, limestone and gravel. Since the construction of the pavement in the summer of 1941, several reports and memoranda have been released dealing with various aspects of the over-all …

Evaluation Of Two Generalized Compressibility Correlations, Elbert Dale Hooper

Theses

Lydersen's critica1 compressibility correlation and Pitzer's acentric factor correlation are compared by the accuracy with which they reproduce P-V-T data. Each introduces a new parameter to be employed in conjunction with reduced temperature and reduced pressure to account for the behavior of substances of various types.

It is established here that the correlation proposed by Pitzer and co-workers is the more reliable for compressibility and saturation pressure predictions for most substances over a wider temperature and pressure range. The critica1 compressibility, however, improves compressibility predictions near the critica1 point for polar compounds.

Included are graphs and tables showing the deviations …

Ferro And Ferricyanides In Industrial Waste Water, Frederick Joseph Neff

Theses

The role of the Ferro and ferricyanides in present day waste treatment practice is reviewed. Possible conventional methods for the disposal of the compounds appear inadequate. It is shown experimentally that the cyanide content of Ferrocyanide may be oxidized by hypochlorite in alkaline solution when exposed to ultra-violet light and that no oxidation of the cyanide occurs when reacted with hypochlorite in diffuse laboratory light.

Ion Exchange Technology In The Sodium And Ferric Ion-Dowex 50 Systems, Alfred George Hoerrner

Theses

This investigation was directed toward the extension of data on the kinetics of monovalent - trivalent cation exchange and to establish data on the relationship between temperature and total capacity of an ion exchange resin. In order to compare the present study to a previous investigation by Klosowski (2), the capacity of the resin used for ferric and chromic ions was also measured.

In the kinetic study, the ferric ion-hydrogen ion exchange using Dowex 50 X-8 resin was studied in an agitated vessel. A two-bladed marine type propellor was used and the agitator speed was varied from 400 to 800 …

A Study Of A Production Control System In A Job Order Die Casting Plant, Robert Gordon Woodnorth

Theses

This thesis examines the production planning and control system in a job-order die casting plant. After comparing to the criteria for an ideal system the following changes were recommended.

1. Central work storage and dispatching. This would reduce work in process and workload fluctuations through closer planning. It would also provide a perpetual inventory system and a central control point which would be constantly informed of production progress.

2. Operator trucking. By having operators do their own trucking material handling costs and production delays would be reduced.

3. Simplified job cost accounting. The use of standard costs for finishing and …

Back-Reflection Camera, Charles T. Burtch

Bachelors Theses and Reports, 1928 - 1970

The following paper is a record of the procedure used to construct a back-reflection camera. It will also discuss the difficulties encountered and some of the methods used to eliminate or reduce them.

The Application Of Amalgam Metallurgy To Copper, Barry J. Hansen

Bachelors Theses and Reports, 1928 - 1970

The object of this investigation is the application of "Amalgam Metallurgy" to the extraction of copper from its ores. "Amalgam Metallurgy" as defined by Hohn is the use of liquid mercury in the extraction of metals. The ore under study was from the Kelly Mine in Butte, Montana and contains about 1.0% copper of which about 0.1% is acid soluble.

Production Of Standard-Grade Ferromanganese In An Electric Arc Furnace, John P. Hager

Bachelors Theses and Reports, 1928 - 1970

The original purpose of this thesis was to determine the feasibility of producing standard-grade ferromanganese from the Cuban concentrates using an electric arc furnace. This purpose was later changed since it became necessary to study the adequacy of a laboratory electric arc furnace for comparability with commercial operations.

Since the original purpose of the investigation had been changed while the area of investigation had not, the research work was then continued with the purpose of collecting information on ferromanganese production as a background for anticipated future work in pyrochemical research at the Montana School of Mines.

Ferromagnetism In Some Alloys Of The Copper-Manganese-Tin System, Leonard W. Boyd Jr.

Bachelors Theses and Reports, 1928 - 1970

The specific purpose of this investigation is to study the effects of heat treating at various temperatures for different lengths of time, with special attention paid to changes in magnetization. Identical heat-treating conditions were used on several different alloys, the compositions of which are such that some specimens are in the single-phase beta prime and beta regions, whereas others are in two-phase regions. For this investigation, only magnetic measurements will be attempted.

Construction Of A Heavy Duty Military Airfield On Permafrost., Owen N. O'Leary

Civil Engineering ETDs

An examination of the map of the northern hemisphere will show that the two great population areas of opposing ideologies are located across the arctic regions from each other. This fact has been recognized by the U.S. military authorities since the early 1940’s, and an effort has been made to locate military forces in these regions to act as a possible deterrent to any aggressive action. The nature and geography of this region generally preclude any military forces except combat airfield. The most outstanding and possible only example of a major military airfield located entirely on permafrost material in these …

Test 651: Minneapolis-Moline 5 Star (Lpg), Nebraska Tractor Test Lab

Nebraska Tractor Tests

This report and any related files are made available to the online through the Lester F. Larsen Tractor Test and Power Museum as resources allow. Established in 1998, this museum is located on the University of Nebraska-Lincoln East Campus. It is and appropriately housed within the walls of the historic 1920 Nebraska Tractor Test Laboratory, where the first tractor test was started on March 31st, 1920. Because the pioneer tests became worldwide standards, this location was designated as a Historic Landmark of Agricultural Engineering by the American Society of Agricultural Engineers in 1980, shortly after testing was moved to a …

Test 652: Minneapolis-Moline 5 Star (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

This report and any related files are made available to the online through the Lester F. Larsen Tractor Test and Power Museum as resources allow. Established in 1998, this museum is located on the University of Nebraska-Lincoln East Campus. It is and appropriately housed within the walls of the historic 1920 Nebraska Tractor Test Laboratory, where the first tractor test was started on March 31st, 1920. Because the pioneer tests became worldwide standards, this location was designated as a Historic Landmark of Agricultural Engineering by the American Society of Agricultural Engineers in 1980, shortly after testing was moved to a …

Determination Of Q Factors And Operating Characteristics For Microwave Cavities And Oscillations, W.P. Stearns

Electrical and Computer Engineering ETDs

This paper has as its objective the presentation of the theory involved and method used with respect to the resonant cavity parameters; loaded Q, unloaded Q, external Q, pulling figure, and circuit efficiency for the resonant cavity investigated. Experimental data on a particular cavity are discussed and the previously mentioned cavity parameters determined with the use of such data and the particular method presented. A Rieke diagram for the particular cavity investigated is also presented and discussed.

A Portfolio Of Advanced Mining Equipment Ideas, George L. Wilhelm

Bachelors Theses and Reports, 1928 - 1970

This paper presents a series of idealized sketches and accompanying descriptions of mining equipment. The ideas contained herein apply broadly to the mechanization of underground mining and development. Considered here are new techniques of material handling, drilling, mucking and rock transportation.

The Effects Of Acid Concentration On The Current Efficiency During The Electrolysis Of Zinc Sulfate Solution, Jon Langfeldt

Bachelors Theses and Reports, 1928 - 1970

The current efficiency during the electrolysis of zinc sulfate solution and the various factors that effect the current efficiency are major considerations of this industrial process. The factors affecting current efficiency-- temperature, current density, presence of impurities, time of electrolysis, hydrogen overvoltage, smoothness of the deposit, and acid concentration of the cell solution-- are controlled to the extent that current efficiencies of 90-93% are not uncommon in the industrial electrolytic zinc process. However, additional investigations of the effects of these various factors upon current efficiency are warranted, because of the endless search by the non-ferrous metal industries for additional information …

A Study Of The Chemical Factors Affecting The Rheological Properties Of A Quartz-Bentonite Suspension In Water, Harold Bruce Treweek

Bachelors Theses and Reports, 1928 - 1970

Frequently, difficulties are encountered with mineral pulps in a mineral-processing plant, which are not alleviated or minimized by the application of such simple measures as varying fineness of grind of solid material, changing pulp density, or altering equipment operation (within practical limits). The basis of the difficulty in such a situation may be found in the very nature of the pulp-- its flow characteristics and behavior. Recognition of the problem followed by one-point viscometric measurement to determine fluidity can lead an operator to erroneous conclusions. Underlying this difficulty is the lack of technical literature concerning the application of ion exchange …

The Extraction Of Titanium From Titaniferous Magnetite, Roger N. Dokken

Bachelors Theses and Reports, 1928 - 1970

The titanium in the titaniferous magnetite under study, as well as most other titaniferous iron ores, is so intimately associated with the iron that liberation cannot be achieved by mechanical means.

It is obvious from the preliminary investigations that some chemical means must be utilized from efficient extraction of the titanium. Two possible pyrometallurgical methods for this extraction are either soda sintering or direct smelting.

The Zone-Refining Of Aluminum And Magnesium With Copper As The Major Impurity, Russell E. Hoar

Bachelors Theses and Reports, 1928 - 1970

The purpose of this paper is to report on the investigation of the possibility of removing impurities from the two important light metals, aluminum and magnesium, by applying the principles of zone-refining. The impurities in these metals are namely iron, silicon, and copper, which is the main impurity. Copper and iron come from the reduction cells, while silicon is introduced during the preparation of the material for the reduction bath.

The Zone-Refining Of Aluminum With Copper As The Major Impurity, Arlan Edward Rathke, Russell E. Hoar

Bachelors Theses and Reports, 1928 - 1970

The purpose of this paper is to report on the investigation of the possibility of removing impurities from the two important light metals, aluminum and magnesium, by applying the principles of zone-refining. The impurities in these metals are namely iron, silicon, and copper, which is the main impurity. Copper and iron come from the reduction cells, while silicon is introduced during the preparation of the material for the reduction bath.

The Reduction Of Chromium Oxide In A Vacuum Furnace, Raymond W. White

Bachelors Theses and Reports, 1928 - 1970

Interest in vacuum metallurgy has grown considerably in recent years. High vacuum techniques are of fundamental importance as research tools in defining the properties of pure metals, in the extraction and processing of reactive metals, and are becoming increasingly important in commercial metallurgical processes. Much of the work described in recent literature has centered on applications of vacuum to commercial annealing, degassing, distillation, and melting and casting processes.

Attrition-Flotation Of Low-Grade Cuban Manganese Tailings, Donald E. Zipperian

Bachelors Theses and Reports, 1928 - 1970

The primary objective of this project was to develop a process that would yield a salable product from the manganese tailings and to evaluate the economical gain that might be achieved from such a venture. From the nature of the tailings and early flotation research, it became apparent that selective flocculation and subsequent gathering of the manganese-oxide minerals into agglomerates was the key factor to be considered in the flotation testing.

Test 650: Oliver 880 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 649: Oliver 770 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 648: Oliver 770, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 647: Oliver 880, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 646: Case Model 511b, Nebraska Tractor Test Lab

Nebraska Tractor Tests

This report and any related files are made available to the online through the Lester F. Larsen Tractor Test and Power Museum as resources allow. Established in 1998, this museum is located on the University of Nebraska-Lincoln East Campus. It is and appropriately housed within the walls of the historic 1920 Nebraska Tractor Test Laboratory, where the first tractor test was started on March 31st, 1920. Because the pioneer tests became worldwide standards, this location was designated as a Historic Landmark of Agricultural Engineering by the American Society of Agricultural Engineers in 1980, shortly after testing was moved to a …