Digital Commons Network^™

The Separation And Microdetermination Of Cobalt In High Purity Nickel, John Richard Knapp Jr.

Masters Theses

"It has been found that many substances in an extremely pure form or containing certain trace impurities exhibit many unique physical and chemical properties. Investigators studying these properties have encountered many difficulties, especially in preparing the extremely pure substance and/or in accurately determining the quantity of impurities present. These problems arise chiefly from the very similar chemical properties of the constituents being separated and the possibility of contamination during the necessary processing of the substance for purification or analysis.

Trace analysis, therefore, has become very important in recent years. Where previously analyses based upon parts per hundred were adequate, now …

Critical Load For A Rectangular Plate Simply Supported On Three Edges, Built In On The Fourth Edge, And Compressed On Two Opposite Simply Supported Edges By A Load In The Plane Of The Plate, Bert Louis Smith

Masters Theses

"There are many engineering structures in which thin plates are used extensively, some examples of which can be found in ship and airplane structures, bridges, etc. The problem contained in this thesis is the analysis of a thin rectangular plate simply supported on three edges, built in on the fourth edge, and compressed on two opposite simply supported edges by a load in the plane or the plate. This problem becomes one of stability, and the object of the solution is to find the smallest load that will cause the plate to buckle"--Introduction, page vi.

The Effect Of Boundry Layer Control By Passing Fluid Through Transverse Slots On Heat Transfer From A Pipe, Perakatte Joseph George

Masters Theses

"The object of this work is an experimental investigation into the possibility of obtaining an increase in the forced convection heat transfer coefficient for a pipe by passing the fluid through narrow transverse slots cut in the pipe, and thereby altering the boundary layer pattern.

Since the greatest barrier to the flow of heat from a solid to liquid exists at the boundary layer, it can be expected that any device which will alter the boundary layer pattern will alter the heat transfer coefficient. When mass crosses a boundary layer in a direction perpendicular to the main motion of the …

Effect Of Leaching On The Strength Properties Of A Hydrated Lime-Cement Stabilized Soil., Yurdakul Osman Ulugonul

Masters Theses

"The stabilization of soil has been carried on since early historic times. The Romans used lime and volcanic ash as additives for this purpose. After the discovery of cement and its property of bonding soil particles it became one of the essential additives in the soil stabilization field. Many other kinds of additives have been developed and are being used today for soil stabilization.

A question that arises through the increasing use of stabilizers in soil is whether the changes that are effected are of a temporary or permanent nature. Changes may occur from the degradation of the stabilized soil …

A Thermodynamic Study Of The Germanium Sulphides, Satya Prakash Jain

Masters Theses

"The experimental determination of some of the thermodynamic properties of germanium sulphide phases was conducted by a hydrogen reduction technique. The equilibrium H₂S/H₂ ratios were determined as a function of temperature for the two phase equilibria GeS₂-GeS and GeS-Ge. A Tutwiler analysis technique was used to analyze the equilibrated gas mixture for hydrogen sulphide content.

A detailed description is given for the process and the apparatus used in performing the experiments for equilibration of H₂S/H₂ gas mixture. The methods used for the preparation of germanium sulphide phases are also discussed.

The investigation …

Coal Dust Explosions And Their Prevention, Surya Narayan Roychowdhury

Masters Theses

"The purpose of this study is to review the various causes of coal dust explosions and to summarize the preventive measures through which it may be possible to minimize the hazards of coal dust explosions. The properties of coal dust which have an important influence on its explosibility are: fineness, purity, percentage of volatile matter, dryness, age and degree of oxidation, lifting velocities and dispersability, and its static electrification.

Explosibility of coal dust has been studied in laboratories, in explosion galleries and in an experimental coal mine. The data and results obtained from the tests showed that finely pulverized coal …

A Thermodynamic Study Of Germanium Sulfides, Sham Lal Malhotra

Masters Theses

"The vapour pressure of germanium monosulfide (liquid) was determined by a boiling point method. An expression for the vapour pressure as a function of temperature was obtained and the heat of vapourization calculated. Using the heat of sublimation data obtained by other investigators, the heat of fusion was calculated.

The thermodynamic properties, change of standard free energy (Δ F°) heat content (Δ H°) and entropy (Δ S°); of germanium disulfide were determined by using an indirect method. The equilibrium H₂S/H₂O ratios are determined for the reaction:

GeS₂ (s) + 2H₂O(g) = GeO_{2 …}

Investigation Of Economic Design Procedure For A Rigid Frame, Richard S. Groner

Masters Theses

"This work presents an analysis of various arrangements of component parts of a rigid frame. From this analysis a procedure is indicated for a logical choice of member sizes for a first trial selection of a frame for given loading conditions. The first trial solution yields a frame which is in the range of an economical design"--Abstract, page 2.

Deflections Of Two-Way Slabs, Gerald C. Godzwon

Masters Theses

"A reinforced concrete member is by no means a truly elastic member, hence all ordinary deflection calculations relating to it, whichever method, are approximate. By the use of model study actual reinforced concrete slab models, of different end conditions, were built and tested for deflections under uniform loadings. Theoretical and actual deflection of reinforced concrete slabs are compared. The results of these tests indicate that the theoretical deflection equations may be 60 to 80 percent in error when applied to reinforced concrete slabs"--Abstract, page 2.

Heat Transfer Coefficients In Artificially Roughened Pipes, Mehmet Hayati Turan

Masters Theses

"The purpose of this investigation is to determine experimentally the effects of three different types of artificial roughness on the convective heat transfer coefficient in a pipe and compare these values with that for a smooth pipe for turbulent flow"--Introduction, page 7.

Strength And Volume Change Characteristics Of Bituminous Mixtures : Technical Paper, James Hamilton Schaub, William Harner Goetz

JTRP Technical Reports

No abstract provided.

Test 766: Oliver 1800, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Hold On To Your Egg Profits, J A. Hoy

Journal of the Department of Agriculture, Western Australia, Series 4

IN recent years, much sound advice has been made available to poultry farmers to assist them in developing their properties and operating them on profitable lines.

Much of this advice has been utilised to good advantage, but there are still many properties on which the profits are being reduced by feed wastage, damage by rats and mice, lack of sufficient attention to egg quality, unnecessarily high labour costs and failure to keep farm records.

Irrigation In Western Australia : Report On Government-Controlled Areas : 1958-59, H K. Gibsone

Journal of the Department of Agriculture, Western Australia, Series 4

IRRIGATION in the south-western portion of Western Australia is mainly confined to the coastal plain west of the Darling Range where the three main irrigation districts of Harvey, Collie and Waroona have been established by the State Government.

The Government-controlled irrigation areas extend southward from Waroona (70 miles from Perth) to Dardanup (120 miles from Perth) and have an average width of about five miles.

Bulk Handling Of Superphosphate, H G. Cariss

Journal of the Department of Agriculture, Western Australia, Series 4

A MAJOR factor in our agricultural production is the outlay for fertilisers, including the cost of their application to the land.

Any means which can be employed to reduce these costs are therefore of extreme importance to the State's agriculture.

The bulk-handling of fertilisers could be one way of reducing these costs to the farmer.

Australian Spark Arrester Tests, W. F. Baillie, G. H. Vasey

Journal of the Department of Agriculture, Western Australia, Series 4

FORMAL tests on spark arresters are conducted by The Tractor Testing Committee at the Testing Station, Werribe, on behalf of those Companies concerned with tractors, engines or spark arresters who wish to have these equipments tested.

The arrester is tested on the engine it is specially designed for (as in this instance), or if it is sold for use on any or several engines, it is tested on an engine of the highest power for which the spark arrester is intended.

A Method Of Design For Spiral Reinforced, Eccentrically Loaded, Concrete Columns, Lloyd O. Senter

Masters Theses

"This thesis presents a method of designing spiral reinforced, eccentrically loaded, concrete columns on the basis of the 1957 American Association of State Highway Officials specifications.

Equations from AASHO, in conjunction with equations derived in this thesis, are programmed for and solved by the IBM 650 digital computer. The data obtained from the computer is plotted such that, given the normal load and moment on a column, the minimum required area or reinforcing steel may be read directly from the graph.

The derivation or equations, the computer program, and the graphs are included in the thesis"--Introduction, page 1.

Temperature Distribution In A Semi-Infinite Solid As A Function Of The Input Heat Flux, Lloyd Carl Laciny

Masters Theses

"In this thesis the problem of varying heat flux into a semi-infinite solid initially at zero temperature is investigated. Varying heat flux means that the heat transferred to the solid by its surroundings is a function of time; in this particular problem it is chosen to be an exponential function of time. A semi-infinite solid is one which is bounded by only one plane.

This subject has achieved considerable importance in the field of space technology. A body in space is beyond the realm of aerodynamic heating and non-uniform skin temperatures reached as a result of radiation from a high …

International Farm Crawlers: T-4, T-5, & Td 5, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 734: David Brown 850 (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

The Effectiveness Of The Mass-Production Technique In Achieving Selected Objectives For Industrial Arts, Michael William Horton

Dissertations and Theses @ UNI

The purpose of this study was to answer the following questions related to the mass-production technique of teaching industrial arts:

1. Will two comparable groups of student show a significiant difference in achievement with respect to selected industrial-arts objectives when one group is taught by the traditional method and the other is taugh, in part, by the mass-production technique?

2. Will a mass-production project conducted for a period of six to eight weeks aid in the students' understanding of the problems, processes, and methods fo product development and production in industry?

3. Will students who work exclusively on individual projects …

Heat Transfer In A Vortex Flow Metal To Air, Elisha Rachovitsky

Masters Theses

"In this study heat transfer in a vortex flow has been investigated experimentally and analyzed qualitatively.

Air was forced through a Ranque tube in order to get a swirling turbulent flow in its "hot" section. The test section, having a diameter of .355 inches and a length of 27.5 inches, was heated by an induction coil.

Three types of flow were under investigation: a linear turbulent flow, a vortex uniflow and a mixed vortex-linear turbulent flow.

The experiments covered a range of tube-wall temperature from 570 to 900 Deg. R and inlet pressure to the vortex generator ranged from 25 …

Methods For Calculating The Minimum Amortization Tonnage And Maximum Present Value For An Ore Body, Garrett M. Sainsbury

Masters Theses

"The discussion is divided into three parts. Part I describes a procedure for determining the mining rate that gives the minimum amortization tonnage required of an ore body, and the amount of that tonnage. The basic idea is that amortization tonnage is equivalent to the estimated capital costs, including interest, divided by the estimated operating profit per ton. Both capital costs and operating profit per ton can be expressed as functions of mining rate by making use of empirical equations. Therefore, amortization tonnage can be expressed as a function of mining rate. The amortization tonnage is calculated for a series …

High Temperature Oxidation Of Nickel, Virgil R. Friebel

Masters Theses

"Using a sensitive volumetric technique, a study was made of the kinetics of oxidation of nickel at 1200° C. and 1300° C. Three purities of nickel were used for the investigation which was limited to the initial three hours of reaction.

The rate of oxidation of nickel followed the parabolic rate law after an initial period of deviation which lasted up to 40 minutes. No direct correlation was found between the oxide thickness and the end of the period of deviation from the parabolic rate law.

The purity of the nickel was found to have a marked effect on the …

The Constitution Of Magnesium-Rich Magnesium-Zirconium Alloys, Kenneth Allen Fowler

Masters Theses

"The magnesium-zirconium system has been studied to 0.8 per cent zirconium which represents the limit of solubility of zirconium in liquid magnesium at 950°C. Alloys have been prepared by two methods of alloy additions, and the results compared. Microstructural studies have been made of the alloys in the cast, extruded, and heat-treated conditions. The limit of solid solubility has been determined on the basis of resistivity and temperature coefficient of resistivity measurements, as well as by metallographic examination, with good agreement. A secondary structure resulting from precipitation of a second phase within cored regions of the alloy has been studied …

The Effect Of The Rare Earth Elements On The Hot Workability Of Ingot Iron, L. A. Neumeier

Masters Theses

"The effect of mischmetal and rare earth oxides on the hot workability of ingot iron in the hot-short region was studied. Thirteen heats were melted in air in a basic-lined induction furnace. All heats were thoroughly deoxidized with aluminum prior to the rare earth additions. Mischmetal was added in amounts of 0.1, 0.3 and 0.5 per cent. Rare earth oxides were added in amounts of 0.1 and 0.2 per cent. Temperatures were maintained at approximately 2900°F and holding intervals between mischmetal additions and pouring at two minutes. Bars were hot rolled and swaged for hot twisting in the hot-short region. …

Determination Of Vapor-Liquid Equilibrium Data By Continuous Distillation, David William Bunch

Masters Theses

"The procuring of experimental vapor-liquid equilibrium data has been a problem of considerable importance to chemical engineers for a number of years. Modern distillation theory and practice have made accurate vapor-liquid equilibrium data practically a necessity.

Using conventional methods for determining vapor-liquid equilibrium data, an experimenter can obtain only a single vapor-liquid equilibrium composition per trial. Ramalho working with Tiller has developed a new method which makes possible the determination of all values of the vapor and liquid concentrations in a single experiment.

The work done by Ramalho indicated that the necessity for very precise temperature measurements presented a serious …

Segregation Method As Possible Process To Beneficiate Oxidized Lead Ores, Jose Molfino Tomasio

Masters Theses

"In this investigation it has been demonstrated that the Segregation Process has merit for treating oxidized lead ores.

The process comprises heating the crushed ore with salt and coal at about 750° C. to produce metallic lead attached to the carbon particles, which then is recovered by conventional flotation methods.

The quantities of sodium chloride and coal required for the best segregation of lead obtained in this work was 1.0 percent of coal and 1.0 percent of salt by weight.

Good segregation was obtained by using salt and coal as fine as 65 or 48 mesh. Segregation varied with the …

An Experimental Investigation Of Receiver System Sensitivity, James Henry Johnson

Masters Theses

"A method of determining the minimum detectable power density incident at the receiving antenna of a UHF receiver is proposed. The minimum detectable power density is the power density required to produce a signal-to-noise ratio of unity in the output of the receiver. The proposed method includes the receiving antenna impedance, the necessary connecting transmission lines, and the receiver impedance.

It is shown that an error in the antenna directivity will produce a significant error in the overall sensitivity of a receiving system. Since the directivity is the most difficult system variable to determine experimentally, it is probably the limiting …

Physical Property Tests Of Rock, Centrifugal Tests And The Design Of Underground Mine Openings, Samuel Shu Mou Chan

Masters Theses

"Proper design of stable underground mine openings is important to the mining industry today. Various methods have been utilized by investigators to approach this goal.

A review of previous investigations of each of the phases of underground mine opening stress analysis is presented.

An approximate method of designing underground mine structures based on estimation of the initial stress field, rock physical property tests, and model tests, together with preliminary field data, is presented, and a specific example given"--Forward, page i.