Digital Commons Network^™

Study Of Mass Transfer In Oscillating Droplets., Subhash Vishnu Gangal

Masters Theses

"The object of this investigation was to study the resistance to mass transfer inside single oscillating liquid droplets falling in a liquid medium. The following four systems were studied: (1) 3% acetic acid in nitrobenzene and water, (2) 25% acetic acid in nitrobenzene and water, (3) 3% acetic acid in nitrobenzene and glycerin in water, and (4) benzyl alcohol and water. The individual mass transfer coefficients were computed by using the Handlos and Baron relation and were compared with the experimentally determined dispersed phase mass transfer coefficients. The average absolute deviation of the observed values of dispersed phase mass transferred …

The Prediction Of The Thermal Conductivity Of Various Binary Non-Polar Gaseous Mixtures., Chester Foon-Chen Feng

Masters Theses

"A simple method for predicting the thermal conductivity of binary non-polar gaseous mixtures from the force parameters of the pure components and composition was developed. The method is an extension of the application of the combining methods previously derived for viscosity predictions. Altogether, the published thermal conductivities of 683 binary non-polar mixtures at various temperature levels were compared with the corresponding calculated thermal conductivities resulting from the prediction method. The corresponding values predicted from Hirschfelder, Curtiss and Bird's expression were also compared.

Among the 683 binary mixtures, there were 138 di-di, di-poly, and poly-poly mixtures, 241 mono-

Determination Of The Shapes Of Fixed And Moving Polodes Of Class Ii Four Bar Mechanisms., Manharkumar Kantilal Sheth

Masters Theses

"The purpose of this thesis is to determine the shapes of fixed and moving polodes of class II four bar mechanisms, since there has been little, or no work done in determining their shapes.

Twenty different mechanisms were taken to study the shape of the fixed and moving polodes. The best equation which fits each curve was found by using the least square method in polynomials. Coefficients for each curve were determined with the help of the I.BM 1620 computer. The equation was found to be a six-degree polynomial which fits very well to each curve. There seems to be …

Application Of An Orifice Meter To Fan Testing., J. F. T. Agapito

Masters Theses

"In this investigation the application of an orifice meter to fan testing was studied and evaluated. An orifice meter was designed and was installed in a centrifugal fan duct. Measurements were checked and compared with those of a standard pitot-tube traverse and were found to be in very close agreement. It is suggested that a meter of this type could easily be adapted not only to laboratory work but also to field tests"--Abstract, p. ii

A Study Of The Stabilization Of Putnam Silt Loam With Large Organic Cations, George C. Bennett Jr.

Masters Theses

"Laboratory tests were conducted to determine if Aliquat, a quaternary ammonium chloride compound, could be used to change the physical properties of Putnam silt loam. The effects of adding varying amounts of Aliquat to the soil were measured in terms of the results of Atterberg limits tests, the moisture-density relationship, unconfined and triaxial compressive strength, and capillary adsorption characteristics. A small change in the Atterberg limits, the optimum moisture content, and the maximum dry density was noted. An increase in the unconfined compressive strength and a reduction in the moisture adsorption potential was accomplished by the addition of 0.25 and …

The Effect Of Surface Roughness, Cure Pressure, And Temperature Level On The Thermal Resistance Of Bonds And Contacts, David Leo Schwaller

Masters Theses

"This investigation was conducted to determine the thermal effect of temperature level, surface roughness, and curing pressure on bars and bonded interfaces.

The equipment used in this investigation is shown in Fig. 1 and Fig. 2. The four specimens used, cylindrical aluminum alloy bars, were cut radially at their midpoints and faced on a lathe. Heat was supplied by an electrical resistance heating element and an ice bath was used to conduct heat from the alloy specimen. A heat shield was used to insure one dimensional heat flow. Spacers were placed in the insulation at the top, the interface, and …

The Effect Of The Static Compaction On The Mechanical And Physical Properties Of Asphalt Concrete Hot-Mixes, Abdel-Gawad A. Bahgat

Masters Theses

"The objective of this investigation was to study the effect of the static compaction effort upon the physical and mechanical properties of asphalt concrete hot mixes. To study the effect of the static compaction upon the physical properties of the asphalt mixes, six mixes were prepared using hard, well graded crushed limestone as an aggregate, blended with an 85-100 penetration grade asphalt cement. The control mix was prepared and tested in accordance with the Marshall method for mix design. The other five mixes were prepared and tested using the same procedures of Marshall except for compaction, where five different static …

A Study Of The Crystallographic Orientation Dependence Of Electrical Resistivity In Zinc, Paul Frederic Becher

Masters Theses

"A potentiometer and galvanometer setup was used to obtain electrical resistivity data for polycrystalline zinc. Cold working textures were investigated by the reflection technique with a quadrant x-ray spectrometer.

Resistivity data were obtained for specimens that were reduced up to forty per cent from the as received condition, and the corresponding textures were studied. The results indicated that the resistivity change in the rolling direction is due to the reorientation of the c-axis in the rolling caused by cold working"--Abstract, page ii.

Determination Of Transient Temperature Stresses In Plates, Teh Yu Hu

Masters Theses

“The purpose of this thesis is to determine the transient temperature stresses in two-dimensional plate structures restrained against rotation at the ends but not restrained against elongation. In this investigation, only one-dimensional heat flow is considered. The heat flow is first treated as a problem in pure conduction and then the effects of convection through a boundary layer are considered.

The differential equation of transient heat conduction is solved by Fourier series and Duhamel’s theorem, and a graphical method of solution for temperatures in terms of dimensionless parameters is presented.

Solution of this problem is valid for a semi-infinite plate …

Highway Impact Studies: Impact Of Lebanon By-Pass, 1950 To 1963 : Progress Report, Ronald Jerome Hensen, Harold L. Michael, Judson Stillman Matthias

JTRP Technical Reports

No abstract provided.

Analysis Of On-Ramp Capacities By Monte Carlo Simulation And Queuing Theory, Robert Frank Dawson

JTRP Technical Reports

No abstract provided.

Test 873: Oliver 1650 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 874: Oliver 1650, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 875: Oliver 1850, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 869: Oliver 1850 Diesel 4wd, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 871: Oliver 1950 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Crossings For Channels And Drains In The Ord River Area, K S. Cole

Journal of the Department of Agriculture, Western Australia, Series 4

ON farms irrigated by surface methods it is essential to provide crossings over channels and drains.

These crossings must be wide and strong enough to take the biggest farm machinery.

Analysis Of Space Frames By Moment Distribution., Ting-Hwa Wang

Masters Theses

"This work presents an analysis of space frames and planar frames loaded in different planes by the method of moment distribution and the theory of superposition. From this analysis it is found that the torsional stiffness of frame members has a great effect on the final bending moments when twisting moments are applied to the frame. The analysis of space frames considering the forces, stresses, and moments in all three dimensions always yields a design more accurate and economical in material than the traditional planar frame analysis"--Abstract, p. i

Synthesis Of Unity-Gain Rc Networks From Second Degree Transfer Functions., Ronald L. Mcnally

Masters Theses

"A synthesis procedure is presented which realizes second order open circuit transfer functions. This procedure is developed using parallel networks. The transfer functions for each parallel network are obtained by use of separation parameters. Two constraints are used in the development: first, the realized network must be an RC network; second, the desired multiplicative gain constant must be realized. With these constaints a parameter space is developed which aids in the selection of the proper parallel networks to be combined. Necessary and sufficient conditions are developed which are used to test the transfer functions. The realization simply consists of the …

Test 863: Minneapolis-Moline U302 (Lpg), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 866: Zetor 2011 (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 870: Oliver 1850 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 872: Oliver 1950 Diesel 4wd, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 876: Oliver 1850 4wd, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

The Submerged Culture Of Thiobacillus Thio-Oxidans In A Pilot Scale Fermentor, Edward Hibbert Crum

Masters Theses

"A strain of Thiobaci.llus thiooxidans was isolated from a West Virginia coal mine drainage. This strain was characterized by its production of sulfuric acid in shake flasks. The strain was also compared with a pure culture of h thiooxidans obtained from the American Type Culture Collection (ATCC number 8085).

The strain was grown in submerged culture in a 16-liter pilot scale fermenter. Two aeration systems, air and air enriched with carbon dioxide, were examined. The air enriched with carbon dioxide gave a much more rapid growth rate. The culture reached the mid-log phase of growth after 80 hours of incubation …

An Investigation Of The Adaptability Of The Linvill Model For Transistor Synthesis, John A. Reagan

Masters Theses

"The Linvill transistor model may be used for transistor synthesis if the model accurately approximates transistor response and may be readily simulated on an analog computer. Experiments were performed on a transistor to determine the Linvill model parameters. The transistor's large-signal transient response was investigated by pulsing the emitter with a current that drove the transistor from the active region of operation into saturation. The same problem solved experimentally was then solved analytically by replacing the transistor with the Linvill model. The experiment was then simulated on an analog computer by using the equations that govern the Linvill model's response. …

On Optimum Receiver Using Decision Theory, Philip T. Tai

Masters Theses

“In recent years communication engineers have given increased attention to the study of communication through random media. The name random is used to describe a medium the properties of which are stated only in a statistical sense. For example the impulsive response of a certain medium may only be known as one of an ensemble of possible impulsive responses; the particular member of interest being drawn up according to some statistical rule. In other words there exists some "uncertainty" concerning the characteristic description of the medium. Significant work on these problems has been done by Price and Turin. Related work …

An Analysis Of The Simulated Inductande Obtained From Forward Biased Semiconductor Diodes., Everett Harold Vannoy

Masters Theses

"The problem undertaken in this thesis is to study the simulated inductance observed in forward-biased abrupt junction p-n diodes with a highly doped p region and a nearly intrinsic n region and show that it is due to conductivity modulation. Unlike other analyses of this phenomenon, a voltage step is applied to the diode in such a direction as to forward bias it and the behavior of the injected minority carriers are observed. By comparing the resultant current through the diode to the relationship predicted by the equivalent circuit of the diode, an expression is obtained for the simulated inductance. …

The Dissolution Of Deformed Magnesium In Sulfuric Acid., William J. Daniels

Masters Theses

"The negative difference effect exhibited by magnesium while anodically dissolving in saline solutions has been attributed in part by Kokoulina and Kabanov to the expulsion of univalent magnesium ions ^{1, 2}. Recent experimenters have discounted the concept of the anodic expulsion of uncommon valency ions and have explained both the positive and negative difference effects observed for magnesium in dilute acids on the basis of anodic polarization, film disruption, and disintegration of the magnesium anode, i.e. "chunk effect"^{3, 4}.

The purpose of this present investigation was to study the difference effect for deformed magnesium in a dilute …

Forced Convection Heat Transfer Coefficients And Induction Heating, Max Edwin Light

Masters Theses

“The purpose of this study was to design and build an apparatus to experimentally determine the convective heat transfer coefficients for water flowing in a horizontal tube at turbulent flow. Also it was planned to use the apparatus to investigate the spatial dependence of energy deposition by induction heating.

An instrument and measuring techniques were developed that gave reasonable correlations between experimentally determined heat transfer coefficients and values calculated from generally accepted heat transfer relationships developed by other experimenters. Most of the calculated values were within ± 10% of the experimental values for a wide range of flow rates.

It …