Digital Commons Network^™

Problems In Structural Diaphragm Bracing 1. Beams Continuously Braced By Diaphragms 2. I-Section Columns Braced By Girts And A Diaphragm, T. V. S. R. Apparao, S. J. Errera, Gordon P. Fisher

CCFSS Library (1939 - present)

Shear-resistant light-gage metal diaphragms can be very effective in increasing the load carrying capacity of beams continuously braced by diaphragms, or of columns braced by girts which in turn are braced by diaphragms, if proper connections are made between the individual elements. In this thesis, behavior of diaphragm-braced I-beams, channel beams, and Z-beams under uniform moments, and the behavior of axially loaded I-section columns braced by girts which in turn are braced by diaphragms are investigated.

Load-deflection relationships of diaphragm-braced beams are obtained taking into consideration the initial imperfections of the beams and using the equilibrium method. Critical moments of …

Structural Behavior Of Small-Scale Steel Models, William A. Litle, David C. Foster, Duke Oakes, Philip A. Falcone, Richard B. Reimer

CCFSS Library (1939 - present)

No abstract provided.

The Dynamic Behavior Of Steel Frame And Truss Buildings, Dixon Rea, Jack G. Bouwkamp, R. W. Clough

CCFSS Library (1939 - present)

This report describes experimental and analytical studies of the dynamic behavior of the East Building of the University of California's new Medical Center at San Francisco, California. It also describes experimental tests conducted on the East Building's mechanical service tower and on an adjacent elevator tower. Experimental tests on the East Building were conducted in the summers of 1964 and 1965. Vibrations were produced by eccentric-masstype vibration generators. Frequency responses, time responses, and mode shapes were observed. In the summer 1964 tests, the first mode east-west had 2% of critical damping and the first mode north-south had 1.8%; the values …

An Evaluation Of Temperature Distribution Within Asphalt Pavements And Its Relationship To Pavement Deflection, Herbert F. Southgate

Kentucky Transportation Center Research Report

The attached report presents significant progress and achievements in the area of asphalt pavement design. Benkelman beam deflections were used extensively in conjunction with our 1958 study of asphalt pavement performance; apparent relationships between 18–kip deflections and pavement structures were evident then although scatter in the data was thought to be necessarily admissible. During the spring and summer of 1966, another extensive series of pavements, built since 1958, were evaluated from the standpoint of performance and deflection. It seemed compelling at that time to adjust all deflections to some common reference temperature and so the surface temperature of the pavement …

The Crab Orchard And Osgood Formations: The Case For Slope Instability, Robert C. Deen

Kentucky Transportation Center Research Report

For the past few years, the Division of Research, as a part of its continuing study of the occurrence of landslides in Kentucky, has reviewed and studied several sites in order to identify and delineate the geologic and soil formations which might be involved in the unstable earth masses. After a study of a number of landslides, it became evident that one particular material was highly susceptible to the development of landslides. This material, in Eastern Kentucky, is known as the Crab Orchard Formation and was deposited during the middle Silurian age. The Crab Orchard Formation, a deposit some 50 …

Deformation And Energy Absorption Capacity Of Steel Structures In The Inelastic Range, Theodore V. Galambos

CCFSS Library (1939 - present)

This report summarizes the status of knowledge on the inelastic deformability of steel members and frames. It demonstrates that the inelastic response of planar beams, beamcolumns, connections and frames is well understood and can be adequately, though conservatively, predicted by theory provided the loading is static, proportional and monotonic, and adequate provisions are made to inhibit premature local and lateral-torsional instability. The report reviews the available theoretical work, and examines the experimental evidence. It shows that the inelastic rotation capacity, which defines also the "ductility factor" and the inelastic energy absorption capacity, is both predictable and large enough to meet …

The Influence Of Ionic Polarizability On The High Temperature Mechanical Properties Of Ionic Crystals, William A. Johnston

Masters Theses

No abstract provided.

Transient Pulse Transmission Using Impedance Loaded Cyclindrical Antennas, David E. Merewether

Electrical and Computer Engineering ETDs

Two aspects of the problem of pulse transmission using impedance loaded cylindrical antennas have been considered. First, an approximate solution is obtained for the current distribution on a thin cylindrical antenna driven at an arbitrary point along its length. This solution may be applied to an antenna of any length, and its simplicity makes the current distribution rapidly computable. This solution is ideal for the prediction of the transient electromagnetic field radiated when an arbitrary voltage transient is impressed across the input terminals of a long, thin, cylindrical antenna loaded with lumped im­pedances. Second, an antenna synthesis procedure was evolved. …

A High Current Density Pulse-Mode Proton Source: Preliminary Study, Warren D. Smith

Electrical and Computer Engineering ETDs

A neutron source which produces high density pulses is useful, for example, in the simulation of an atomic blast or in neutron activation chemical analysis. Rather than forming pulses by deflecting the deuteron beam emitted from a continuous source of deuterons onto and off of a tritium target, it was decided to investigate the possibility of transient deuteron production. Proton sources were studied in place of deuteron sources because of the availability of hydrogen gas for experimentation. An experimental system was set up in which transient electrical discharges through hydrogen could take place. It was hoped that discharges could be …

A Three-Component Force Transducer For Monorail Rocket Sleds, Vincent Warren Gorman

Mechanical Engineering ETDs

A three-component force transducer which permits measurement of the vertical force, the cross-track force, and the roll moment about an axis parallel to the track was developed for use on monorail rocket sleds. For this force system it was found that the maximum allowable load for both the vertical and cross-track components was approximately 28,000 pounds, and the maximum allowable roll moment was approximately 45,500 inch-pounds. The transducer, mounted between the slipper and sled, uses strain gages as component sensing elements. The strain gage bridges were statically calibrated for each component of load the transducer was designed to measure. In …

The Effect Of Transient Ionizing Radiation Upon Schottky Barrier Diodes, Robert H. Schnurr

Electrical and Computer Engineering ETDs

The theory of operation of the Schottky barrier diode was reviewed. The complications caused by a more accurate space charge formulation were discussed. Consideration of image effects, tunneling, interfacial dielectric layers, surface states, and minority carrier current was also included.

The interaction of ionizing radiation with semiconducting materials was reviewed. The behavior of a Schottky barrier diode in an ionizing radiation environment was considered. The resultant model for the Schottky barrier diode is analogous to a p-n diode with one side having a very high dopant concentration.

Tests were performed upon GaAs and silicon Schottky barrier diodes, using a 2 …

Analysis Of Traffic Loads On Bridges, Robert L. Lynch

Kentucky Transportation Center Research Report

This report contains information concerning:

1. The statistical determination of frequencies of critical axle loadings on highway bridges and
2. The adaptability and adaptability of historical loadometer and classification data in Kentucky to the recently adopted AASHO design criteria for evaluating the fatigue history of existing bridges.

The analysis of the fatigue history of a bridge consists of evaluating the distribution of instantaneous axle loadings over the applicable period. Because of the urgency, only historical records currently available were used as source data. This report is therefore divided into two sections: 1) a summary of quantitative results based on available data, and …

Construction And Interim Performance Report Of Experimental Salt (Nacl) Stabilization Of Plant-Mixed, Dense Graded Aggregate, Robert L. Florence

Kentucky Transportation Center Research Report

For some time the Department has been interested in building-up and retaining thicknesses of granular base course on rural roads through the use of various stabilizing additives and(or) the use of light asphalt seals or surfacings (1, 2, 3, 4, 5, 6). These efforts more or less recognize that the "stage construction" concept is frustrated by weather and traffic erosion of unbound and exposed granular base material. Thus, the motive in experimenting with and in utilizing these treatments is to find economical and effective means by which a granular base can be built and retained until such time that a …

The Dynamic Low Cycle Testing Machine: (Design And Calibration), Michael J. Shannon

Mechanical Engineering ETDs

The design and development of a loading device for subjecting a reversed shear specimen to a pulsed dynamic load is described. The development includes calibration technique to confirm that design criteria had been met. A relationship between plastic deformation and peak tensile load is presented.

Hq Amc Go 5, Missile Intelligence Directorate, Us Army Missile Command, Huntsville, Alabama, 19 January 1968., Headquarters Us Army Materiel Command, Robert Bolin , Depositor

United States Department of Defense Military Intelligence

This order established the Missile Intelligence Directorate (MID) as an intelligence agency assigned to the US Army Missile Command to “… develop, maintain, and disseminate foreign scientific and technical intelligence concerning ground forces, surface-to-surface, surface-to-air, and anti-ballistic missile systems in response to valid Department of Defense, Department of the Army, and Army Materiel Command production requirements.”

This order established the second intelligence production organization within the Army Materiel Command. The first being the US Army Foreign Science and Technology Center.

Specification For The Design Of Cold-Formed Steel Structural Members, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Isotope Effect Of Interstitial Diffusion Of Carbon In A Dilute Fe-Si Alloy, Edward T. Yen

Masters Theses

"The isotope effect of carbon interstitial diffusion in a Fe-2.75at%Si alloy has been measured at -3.10°C using the disaccommodation technique. The disaccommodation has been analyzed in terms of two relaxation processes which are discussed on the basis of the reorientation mechanism of carbon interstitials at Fe-Fe sites and Fe-Si sites respectively. The ratios of the relaxation times [tau]₁₃/[tau]₁₂ are 1.0382 for the former and 1.0072 for the latter relaxation process. This result is discussed on the basis of many-body reaction rate theory"--Abstract, page ii.

Zener Disaccommodation In Dilute F.C.C. Co-Ti Alloys, H. B. Aaron, M. (Manfred) Wuttig, H. K. Birnbaum

Materials Science and Engineering Faculty Research & Creative Works

The magnetic Dis accommodation, i.e., the time dependence of the low field magnetic permeability, was investigated in cobalt base alloys containing 0-5.1 at.% (0-4.2 wt.%) titanium in the temperature range 400-700°C. A strong temperature dependence of the Dis accommodation observed in the range 430-530°C could be accounted for predominantly by a single first order relaxation process. Analyzing the data in terms of (a) a single exponential relaxation, (b) a lognormal distribution of relaxation times, and (c) a sum of exponential relaxations, it was shown that the relaxation strength varies as the square of the titanium concentration and that the relaxation …

West Midlands Development : Erosion Prevention And Control, G W. Spencer

Journal of the Department of Agriculture, Western Australia, Series 4

THE prevention of soil erosion is essentially a matter of using each soil according to its potential, and treating it according to its needs.

Good land use and sound management practices are the best preventive measures.

West Midlands Development : Development Techniques, Department Of Agriculture, Western Australia

Journal of the Department of Agriculture, Western Australia, Series 4

Most clearing in the West Midlands is carried out by chaining, though the method chosen will depend on the country being cleared and on the resources of the farmer.

Concrete In Dairies, D Roger Buchanan

Journal of the Department of Agriculture, Western Australia, Series 4

PRIME requirements for exposed concrete surfaces in dairies are that they should be easily cleansed and should not deteriorate in contact with milk and milk products.

In milking stalls, animal races and on loading platforms hardwearing surfaces which offer good foothold are also necessary.

The Identification And Evaluation Of Toxic Effects Of Organic Micropollutants, John Warren Smith

Doctoral Dissertations

No abstract provided.

Prediction Of Drag Reduction With A Viscoelastic Model, Gary Kent Patterson, J. L. Zakin

Chemical and Biochemical Engineering Faculty Research & Creative Works

No abstract provided.

Numerical Differentiation Of Equally Spaced And Not Equally Spaced Experimental Data [3], Harry C. Hershey, Jacques L. Zakin

Chemical and Biochemical Engineering Faculty Research & Creative Works

No abstract provided.

Waveform Distortion Caused By A Plasma Sheath, James R. Carl

Masters Theses

"A short burst of electromagnetic energy that propagates into and through a plasma medium can react with the plasma medium in several different ways depending on both the characteristics of the plasma and of the pulse. This thesis derives approximations for the plasma transfer function at low pressure (high altitude) and at high pressure (low altitude). The mechanisms that can change the shape of a waveform, in general, are dispersion and breakdown. dispersive distortion at low altitude is shown to exist for electron concentrations well above the resonant concentration for plasma sheaths that are thin compared to one wavelength. Several …

Influence Of Continuous Precipitation Upon The Growth Kinetics Of The Cellular Reaction In An Al-Ag Alloy, H. I. Aaronson, J. B. Clark

Materials Science and Engineering Faculty Research & Creative Works

The influence of the prior formation of a continuous precipitate upon the growth kinetics of the cellular reaction has been evaluated in an Al-17.9 wt. % Ag alloy. The continuous precipitate, in the form of intragranular plates of the γ′ transition phase, was shown to have reduced the upper bound of the driving force for the cellular reaction from the silver content of the untransformed alloy to that corresponding to the coherent solvus. When this reduction (≥ 98 %) is taken into account, the growth of cells is found to be controlled by cell boundary rather than by volume diffusion …

Age Hardening In A Mg-9 Wt.% Al Alloy, J. Beverley Clark

Materials Science and Engineering Faculty Research & Creative Works

The precipitation process and age hardening mechanism in a Mg-9 wt.% Al alloy were studied principally by transmission electron microscopy. This alloy age hardens by the general precipitation of plates of the equilibrium Mg₁₇Al₁₂ phase on the basal plane of the magnesium solid solution matrix. No evidence for the formation of either G.P. zones or a transition lattice of the Mg₁₇Al₁₂ precipitate was obtained. Cellular precipitation occurs competitively with the general precipitation at nearly all age hardening temperatures. In the solution treated condition, basal slip and {101̄2} twins are the principal deformation modes. Precipitation …

Application Of Stanford Watershed Model Concepts To Predict Flood Peaks For Small Drainage Areas, K. D. Clarke

Kentucky Transportation Center Research Report

This report embodies two principal objectives: 1) updating rainfall intensity-duration curves for the hydraulic design of culverts and 2) adaptation of the Stanford Watershed Model concept to small drainage basins in Kentucky. The first objective is familiar -- the curves presently being used for the rational method of design were established from an earlier Department study made by E. M. West and W. H. Sammons, issued in July, 1955 (Report No. 2, "A Study of Runoff from Small Drainage Areas and the Openings in Attendant Drainage Structures"), and were based on rainfall records then available through 1951. The second objective …

Water Quality Telemetry First Annual Progress Report, Duard S. Woffinden, Allen D. Kartchner

Reports

No abstract provided.

Feasibility Of Rating Current Meters In A Velocity Field, Gaylord V. Skogerboe, Lloyd H. Austin, Roland W. Jeppson, Chi-Yuan Wei

Reports

Preliminary studies employed an 8-inch (outlet diameter) contracting cone and an 8-inch converging nozzle. The design of the cone is based on an electromagnetic analogy reported by Smith and Wang, while the nozzle was designed assuming potential flow and using numerical methods to obtain the solution. Both designs yielded fairly uniform velocity fields, any deviations being primarily due to either construction or measurement techniques. The towing tank rating for a Pygmy current meter was compared with the submerged jet rating, the difference being 1 or 2 percent. A Prototype system was constructed using a 16-inch contracting cone (d). Two Type …