Digital Commons Network^™

Test 1117: International Farmall 766 Diesel 16-Speed (Chassis S/N 2490180u009000 And Up), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Optimization Analysis Of A Simple Position Control System, Arthur G. Cannon

Retrospective Theses and Dissertations

One of the problem areas of modern optimal control theory is the definition of suitable performance indices. This thesis demonstrates a rational method of establishing a quadratic performance index derived from a desired system model. Specifically, a first order model is used to provide a quadratic performance index for which a second order system is optimized. Extension of the method to higher order systems, while requiring more computations, involves no additional theoretical complexities.

Flood Control Modeling, Peter E. Delle Donne

Retrospective Theses and Dissertations

This is a research report that discusses some continuous and discrete modeling techniques. The report applies these techniques to the analysis of Canal 38 (Kissimmee River) part of Central and South Florida Flood Control District. The analysis is based on recorded data for defining the physical systems parameters. Established parameters are mathematically related to define a descriptive model for Canal 38. The modeling procedure of 'trial and error' is used to assemble the model with measures of merit, the integral square error, and root mean squared error. General simulation considerations are discussed for application of the mathematical model.

Analyses Of The Water And Wastewater Systems At Florida Technological University, Fred C. Jensen

Retrospective Theses and Dissertations

In searching for a subject to meet the M. S. Degree Research Report requirements, I had several objectives in mind. I wanted (1) a project with relevancy in the environmental field which would broaden my understanding of the environmental systems which I have studied, (2) a subject which would allow me to apply some of the Principles which I have learned in Operations Research , and (3) a project which had good practical application. With these objectives in mind, I reviewed the suggested topics presented by the Faculty and selected the FTU Water and Wastewater System Analyses topic which was …

Rapid Mixing In Water And Wastewater Treatment, Randall C. Rector

Retrospective Theses and Dissertations

No abstract provided.

Interactions Of Pesticides And Phytoplankton, Pamela H. Philyaw

Retrospective Theses and Dissertations

No abstract provided.

An Investigation Of Methods For Reuse Of Rubber Tires, Charles Edward Armbruster

Retrospective Theses and Dissertations

Methods of reusing/recycling the more than 250 million automobile and truck tires which are worn out each year were investigated. The existing methods of reusing tires account for about 30 percent of the volume of scrap tires generated each year. These methods are, Retreading, Reclaiming (by reducing to ground up rubber and fiber), and Tire Splitting (stamp items out of sidewall and tread areas). Several possibilities for reusing/recycling the unused 70 percent were discovered. These methods are as follows: Destructive Distillation -- a method of recovering chemicals from tires by pyrolitic action. It is anticipated that eventually as much as …

The Relationship Of Textbooks To Development Of Course Content In The Teaching Of Small Gas Engines, Frank Demchuck

All Master's Theses

This study compares and evaluates the ideas and opinions of practitioners with the ideas and opinions of educational theorists. Information from the practitioners was gathered by questionnaire. Information from the theorists was gathered by a search of the related literature. The findings, showing the relationship or textbooks to the development of course content in the teaching of small gas engines, are presented and evaluated. A small gas engines textbook outline based on information gained from this study is also presented.

Design And Analysis Of A Phase-Locked Loop Suitable For Synchronization Of An Optical Receiver, Douglas Wayne Dreisewerd

Masters Theses

"The required synchronization of a dynamic crossed-field photomultiplier tube (DCFP) is accomplished by means of a phase-locked loop for which the salient feature is the use of the DCFP as the phase detector. This action is necessitated due to the unique sampling and phase focusing type of operation of the DCFP. The phase-locked loop is implemented by dithering the phase of the synchronizing RF drive signal, bandpass filtering the output pulses of the DCFP and using a synchronous detector at the dither frequency to determine the phase relationship between the incoming mode-locked laser pulses and the RF drive signal. The …

A Study Of The System Lithia - Silica, Roy Richard Ramey

Masters Theses

"X-ray intensity and d-spacing measurements were performed upon samples in the system Li₂O-SiO₂. Samples ranged from 0.0 to 28.0 mole percent lithia and were fired for 72 hours at temperatures from 920ºC to 1400ºC. Atomic absorption analyses were made upon the fired samples. Non-equilibrium conditions were prevalent and results are inclusive. Quartz is the stable phase in the high silica field at temperatures below 1050ºC with cristobalite stable above that. The quartz - cristobalite transformation occurs at 950ºC with the cristobalite transforming into tridymite at 1010ºC. There was wide scattering of data at 1000ºC and below. There was no correlation …

A Study Of Three Methods Which Solve A Suboptimum Control Problem On An Iterative Analog Computer, Joseph Camp Finney

Masters Theses

"Three methods for optimizing a proportional and a proportional-integral controller parameter problem were investigated on an iterative analog computer. The three methods were the parameter-perturbation correlation method, the absolute biasing method, and the variable step size method. The process controlled was third order linear. The performance function used to judge the quality of the controller was the time integral of the absolute value of error. All three methods required a trial and error adjustment of the parameters used in these methods. The optimum solution was obtained by all methods. The absolute biasing method, for both the proportional and the proportional-integral …

Thermal Expansion Of Nickel And Iron, And The Influence Of Nitrogen On The Lattice Parameter Of Iron At The Curie Temperature, Jinn-Wen Hwang

Masters Theses

"By precise X-ray measurements, the lattice parameter of pure nickel (Fisher Co., reagent grade) was found to be 3.52389 Å at 25ºC. At the same temperature, the lattice parameters of iron samples were found to be: 2.86621 Å, 2.86624 Å and 2.86614 Å for purities of 99.999%, 99.985% and 99.9%, respectively. By measuring high angle back reflection lines, the linear coefficients of thermal expansion of both nickel and iron were precisely determined. Both, high purity nickel and iron, exhibited anomalies in their expansion coefficients near their Curie points. This is in agreement with some of the previously reported data. Some …

Investigation Of A New Type Of Cloud Condensation Nuclei Counter: The Thermal Quench Chamber, Donald Arthur Hess

Masters Theses

"The design and development of a new type of cloud condensation nuclei counter was undertaken to provide a new laboratory and field instrument that operates on a different theoretical basis than the thermal diffusion chamber now being used by meteorologists and other scientists. In the new instrument the test aerosol is pumped through a tube where it is first humidified and then cooled at constant pressure to create a supersaturation, causing water vapor to condense upon the nuclei in the aerosol sample. The concentration of cloud condensation nuclei is then determined by counting the water drops. The control of temperature …

Transient Cooling Of A Sphere Due To Boiling, Salil K. Banerjee

Masters Theses

"The time - dependent surface temperature is determined for a sphere subjected to cooling by boiling. One dimensional heat transfer is considered and the solid is assumed to be homogeneous, isotropic and opaque to thermal radiation and to have temperature independent physical properties. The initial temperature of the sphere and the coolant are assumed to be uniform and arbitrary. The boiling heat transfer coefficient at the surface of a sphere is a strong function of the surface temperature thus resulting in an extremely nonlinear transient heat conduction problem. As a practical application of the problem, the process of quenching has …

Use Of Isotopes To Reduce Neutron-Induced Radioactivity And Augment Thermal Quality Of The Environment Of An Underground Nuclear Explosion, Nathaniel Fred Colby

Masters Theses

"The use of isotopes to include radioactive waste products to reduce the neutron-induced activity of an underground nuclear explosion and its application in the field of geothermal power stimulation is discussed. A shield composed of selected isotopes surrounding a fusion device will capture excess neutrons producing isotopes with short half-lives. Subsequent rapid decay will prolong the high temperature in the vicinity of the explosion and decrease the activity. Long-lived isotopes created by neutron capture in the host rock would be minimized. The investigation is conducted for strontium-90, cesium-137, cerium-144, technetium-99, rhodium-103 and -105. Of these, the first three appear to …

Feasibility Study Of Using A Steam Power System In A Small Garden Tractor, Niranjan Kumar Doshi

Masters Theses

"This thesis is a feasibility study of using a steam power system in a small garden tractor. The relative advantages of steam power are discussed and compared with the characteristics of internal combustion engines. A monotube boiler is designed where steam is generated in stacked tube spirals. The boiler generates 225 lbs/hr of dry saturated steam at 500 psia, which corresponds to an engine output of 20 IHpage A rotary positive displacement engine is employed to expand the steam to 16 psia. A rotor instead of a piston eliminates the conventional connecting rod and crank shaft. The engine developes 15 …

Calculation Of Buildup Factors For Multilayer Slab Shields Using The Monte Carlo Method, John Paul Kuspa

Masters Theses

"Gamma-ray beams normally incident upon slab shields of varying compositions are studied using a computer program based upon the Monte Carlo technique. Initial gamma energies of 1, 4, 6, and 8 MeV are considered. The shielding materials used were aluminum, iron, and lead. Both single and double material shields were investigated, at a variety of thicknesses up to a maximum of five mean free paths. Two secondary gamma processes are included in this simulation: annihilation gammas from pair production and bremsstrahlung from the electrons. The primary effort is the calculation of the dose, energy, and number buildup factors for these …

Force Analysis Of Involute Spur Gears, Janakkumar Girjashanker Dave

Masters Theses

"This study is devoted to the fundamental action which occurs between spur gears with involute tooth profiles when power is transmitted at a constant angular velocity ratio. Various aspects of the interaction between two mating teeth are considered. Analytic expressions for the variation of the force transmitted between two teeth are derived. Two cases are considered which include and exclude the effects of sliding friction between the teeth. The parametric equations of the involute curves for two mating teeth are derived in terms of body-fixed coordinates. Analytical expressions for Hertz compressive stresses in the teeth were also obtained. The same …

Design Of A Digital Control Unit For A Seismic Digital Tape System, Cao-Van Chung

Masters Theses

"This paper describes the interface between the NOVA digital computer and the Texas Instrument tape unit which handles field data recorded simultaneously from a maximum of 31 channels. The interface is the means through which the NOVA computer can control the tape unit and recover data. To provide necessary background information a review of the characteristics of the tape unit and the input-output operation of the NOVA computer are given. As the first part of the design, the general interface design is presented and the functions of its units are described. After discussion of functional assignment of each unit, coordination …

A Study And Design Of A Cardiac Interbeat Interval Timer System, Richard William Mooney

Masters Theses

"This thesis reports the design of a system which can measure and record the cardiac interbeat times of human subjects in a continuous beat to beat manner, using the bioelectrical signal associated with the heart as an input. The design is in response to the needs of clinical researchers.

The means of obtaining the bioelectrical signal and previous designs of electrocardiographic equipment, especially electrocardiotachometers, are reviewed. A design is proposed which consists of a preamplifier to amplify the bioelectrical signal, a 60 Hz rejection filter, and a beat detector which uses a differentiation technique to obtain a reliable single output …

High Speed Magnetically Supported Vehicles For Reducing Transportation's Degradations Of The Environment, Pravinchandra Shukla

Masters Theses

"The development of new techniques for higher speed transportation is desirable to satisfy the environmental, conservation, and economic requirements of society. Some of the important factors are presented for developing magnetically supported vehicles. A new method for improving the ratio of lift force to drag force is suggested and discussed. An application of the new technique to vehicles that would ride on a carpet of magnetism and would operate with less waste of energy is suggested "--Abstract, page ii.

The Morphology Of The Cellular Precipitation Reaction In A Pb-3.0 Wt% Sn Alloy, Federico Sequeda Osorio

Masters Theses

"The complete development of the cellular precipitation structure at selected grain boundaries in a Pb-3.0 wt% Sn alloy during aging at 34°C and 23°C was investigated by light microscopy. The cellular structure in this alloy consists of lamellae of solute depleted lead solid solution and lamellae of ß tin precipitate. The cellular precipitation reaction begins by local migration of a grain boundary with concomitant grain boundary precipitation of ß tin. The grain boundary bows around the ß tin grain boundary precipitates which then begin to lengthen in the direction of boundary migration thus forming the precipitate lamellae of the cell. …

Design And Construction Of A Drop Generator For Use In A Vertical Wind Tunnel, Danny Ray Conner

Masters Theses

"A drop generator, based on the principle of a vibrating capillary, was designed and built for use in the UMR vertical atmosphere wind tunnel. The drop generator worked very well on a test stand where it was firmly supported, but was not consistent when tested in the wind tunnel. Vibration of the wind tunnel walls and a slight turbulence near the forward edge of the generator caused an oscillation in the position of the stream of drops. The oscillation resulted in some of the drops hitting the edge of the collector cup, where the drops would accumulate until a large …

Laboratory Studies Using Diffused Oxygen And Air For Hypolimnion Reaeration, Chin-Ming Pai

Masters Theses

"The purposes of this research were to study the oxygen transfer rates and the oxygen transfer efficiencies of different types of aerators using different sources of oxygen in different types of water bodies, and to evaluate the number of diffusers required to be installed in a selected lake for hypolimnion aeration.

The experiments were conducted using a specially designed column. Four types of aerators, including a cylindrical stone diffuser, a spherical stone diffuser, and 2 ceramic diffusers (types A and B) which differed in pore size, were utilized as the aerators. The water bodies selected for the studies were Rolla …

A Study Of The Effect Of Drilled Holes On The Concentration Of Elastic Stresses Around A Notch, Glenn Michael Kmecz

Masters Theses

"Hole drilling as a method for improving the toughness of notch weakened tensile specimens is investigated by means of a photoelastic technique. Tests were performed on 20%, 40%, 60%, and 80% notch depth specimens machined from PSM-1 photoelastic material. The basic criteria for success was no increase in the elastic stress concentration factor. The photoelastic results were verified by a finite element stress analysis of the 60% notch depth specimens. Comparison of the experimental and numerical results provide conclusive proof that no increase in the elastic stress concentration factor occurs when proper positioning of the drilled holes is accomplished"--Abstract, page …

Drag Reduction On Non-Ionic Surfactants In Aqueous Systems, Jen-Lin Chang

Masters Theses

"The use of polyoxyethylene alcohol non-ionic surfactants as drag reducing additives in aqueous systems was investigated. Significant drag reduction was obtained with suitable combinations of one percent Alfonic 1214 and salts at 30°C such that the surfactant was near or above its upper critical solubility temperature. Maximum drag reduction was observed at the cloud point. Relative viscosity values also peaked at this point. No upper critical shear stress was attained up to wall shear stresses of 2,000 dynes/cm² with one percent Alfonic 1214 solutions at their cloud points.

At a fixed temperature, the salt concentration required to reach the …

Effect Of Glass Aggregates Upon Abrasiveness Of Asphaltic Mixtures, Dwarka Prasad Gupta

Masters Theses

"The utilization of glass as an aggregate in asphaltic concrete pavements has been suggested as a means for reusing the increasing amounts of waste glass generated each year in the United States. Recent studies have shown that asphaltic mixtures containing glass aggregates can be designed to meet Marshall requirements for stability, flow and void content but the abrasiveness of mixtures containing glass aggregates had not been investigated. The objectives of this study were to develop a laboratory wear testing apparatus and compare the abrasiveness of asphaltic concrete mixtures using glass aggregates with the abrasiveness of mixtures using several different conventional …

Fundamental Studies Of Portland Cement Concrete, Phase 2 : Interim Report, Sidney Diamond, David Watson Hadley, William Lee Dolch

JTRP Technical Reports

No abstract provided.

Root Cuttings For Roadside Slope Stabilization : Interim Report, David Foster Hamilton, Robert E. Mcniel, Philip L. Carpenter

JTRP Technical Reports

No abstract provided.

Plant Response To Nitrogen From Three Slow Release Fertilizers : Interim Report, Robert E. Mcniel, Philip L. Carpenter

JTRP Technical Reports

No abstract provided.