Digital Commons Network^™

Sinkholes In Florida And Their Effect On Man's Environment, Gregory Jackson Skinner

Retrospective Theses and Dissertations

The primary reason for making the research study on "Sinkholes in Florida and Their Effect on Man's Environment", is an interest in learning more about this somewhat unique phenomenon and how it is likely to affect man in the future, particularly here in Central Florida. This is significant at this time in view of the large number of existing sinkholes, the frequency of occurrence, the projected population and economic growth, and the possible impact this growth may have on future sinkhole occurrences. The research concentrated on possible causes, effects, frequencies, locations and mean of predicting future sinkhole development. There is …

Survey Of Instrumentation For Air Quality Surveillance, John Bowling

Retrospective Theses and Dissertations

No abstract provided.

A Mathematical Model For Determining The Thermal Distribution Resulting From Discharge Of A Heated Effluent, Alan H. Epstein

Retrospective Theses and Dissertations

A mathematical model is presented for the problem of determining the two-dimensional temperature distribution resulting from the discharge of a heated effluent into a shallow, quiescent receptacle. The physical model of the problem is the two-dimensional jet augmented by an imposed condition of viscous drag due to bottom friction effects. By virtue of the assumption that the physical properties of the effluent are independent of temperature over the operational temperature range of the plume, the analysis separates the total problem into a flow problem and a temperature problem. Solution of the temperature distribution is accomplished both analytically and numerically. Analytically, …

Suppression Of Turbofan And Turbojet Engine Generated Noise, Harry David Master

Retrospective Theses and Dissertations

Every advance in the transformation of heat energy into mechanical energy has involved a noise problem, and in general it increases with the power production. The jet airplane is a good example: the large-scale turbulence of the exhaust gases in the jet forms an unusually intense source of sound the control of which is quite difficult. The additionally generated fan noises add characteristic fan tones which are particularly noticeable on landing approaches. the human ear is the vulnerable receiver of these noises, and the problem becomes one of deciding how much jet engine noise reduction is required for the comfort …

Data Management For A Police Command/Control Simulation Study, Gerald Louis Locasale

Retrospective Theses and Dissertations

The primary purpose of this thesis is to aid the Orlando Police Department locate areas of improvement with the effect of reducing the total response time of the Command/Control Center through the application of basic industrial engineering techniques. This work is presented in three major chapters. The first is concerned with the definition of the present operation of the Center, the total scope of each separate function within the Center and the interactions with the general public and other public safety departments. The second chapter develops the studies which provide the input values for the simulation model and the analysis …

Asynchronous Digital Multiplexing, Carlos F. Ojeda

Retrospective Theses and Dissertations

No abstract provided.

Feasibility Study Of A New Approach To Resolve Radar Range Bin Ambiguity, Donald Shue Yee

Retrospective Theses and Dissertations

This report describes the study of a new approach to resolve pulse radar range bin ambiguity problem. The nature and the cause of the problem are discussed, and various methods presently used to solve this problem are presented. The report points out the disadvantages of these methods and, thus, introduces a new approach to resolve the radar range bin ambiguity problem by examining the reasonableness of the trajectory of the object being traced. Necessary algorithm and computer programs to support the study are given in Appendices I, II, and III.

Experimental Study On Viscoelastic Properties And Fracture Characteristics In Polymers, Debaranjan Mohanty

Electronic Theses and Dissertations

The research reported in this thesis is undertaken with the following objectives:
1. To determine the viscoelastic properties of polymers on creep test under constant load;
2. To determine the internal friction (loss factor) of polymers under periodic loading condition;
3. To determine the delayed time or life time on fracture of the polymer under constant loading ; and
4. To verify the relationship, theoretically predicted, between the time to fracture and the material characteristics of the polymer with experimental observations.

Saturated Enthalpies For Mixtures Of Propane And Propene, David B. Manley, George W. Swift

Chemical and Biochemical Engineering Faculty Research & Creative Works

No abstract provided.

The Plasma Polymerization Of Vinyl Monomers. Ii. A Detailed Study Of The Plasma Polymerization Of Styrene, L. F. Thompson, Kenneth G. Mayhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

A study has been made on the plasma polymerization of styrene monomer in a cold, low‐power, inductively coupled RF plasma. Styrene monomer yielded an insoluble, crosslinked film which was slightly colored. A kinetic study is reported for styrene. The effects of power level, bleed rate of monomer, pressure, and reactor geometry on the rate of polymer formation are reported. A mechanism is postulated for plasma polymerization. It was found that the initiation step was the rate controlling step and that the reaction followed a cationic polymerization scheme. Both crosslinking and discoloration of the polymers occur at the time of polymerization …

Characterization Of Poly(Methyl Methacrylate) From Radiation‐Induced Polymerization In The Presence Of A Kaolin Clay Substrate, J. J. Beeson, Kenneth G. Mayhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Two types of polymer are formed in the radiation‐initiated polymerization of methyl methacrylate (MMA)–kaolin clay complexes. Homopolymer can be extracted from the complex by the use of organic solvents. Inserted polymer must be removed by dissolution of the polymer–clay complex with hydrofluoric acid. The polymers formed show no differences in structure (as determined by infrared analysis), had high molecular weights (1–5 x 106), and had similar molecular weight distributions (as determined by GPC). The molecular weights of the homopolymer increased as temperature increased (25°–75°C), and dose rate decreased (24.9–7.35 rads/sec). The isotacticity of the polymers when compared to irradiated bulk …

An Incrementally Distributed Mathematical Model Of A Watershed, Charles Arnold Onstad

Electronic Theses and Dissertations

The utilization of distributed input parameters enables hydrologists to more adequately cope with watershed management problems. A distributed system aids in evaluating alternative solutions designed to alleviate a problem situation. As a result, the objectives of this study were (1) to develop a hydrological framework delineating the surf ace configuration of a watershed to consider parameter distribution; (2) to develop a model of hydrologic performance of a watershed using existing techniques and amenable to the physical framework; and (3) to demonstrate the versatility of the model using hypothetical data. The model versatility was demonstrated by showing the effects of different …

The Role Of Rainfall Impact And Surface Flow In Soil Detachment And Transport, Robert Alan Young

Electronic Theses and Dissertations

Soil erosion caused by rainfall is a very complex physical process. To evaluate the mechanism of erosion so that an assessment can be made of the extent to which it may be controlled necessarily begins with an understanding of the basic fundamental factors involved. The purpose of this study involves the development of an insight of the relative importance of the roles played by various contributors to the erosion process. Particular emphasis is placed on the contribution of rainfall detached soil to total soil loss. Three soil types, Barnes loam, Crofton silt loam and Central sandy loam, were prepared with …

A Simulation Of Sediment Deposit In Open Channels, Tsan-Wen Wang

Electronic Theses and Dissertations

In this study, two mathematical models have been developed to simulate sediment deposition in open-channel flow; a model based on three characteristic equations and a model based on two characteristic equations. A set of three partial differential equations for one dimensional transient flow with homogeneous density was provided to explain the mechanics of the phenomenon. By the method of characteristics, three partial differential equations were transformed into a set of three ordinary differential equations or a set of two ordinary differential equations by simplification in which the change of sediment layer thickness with respect to distance was assumed to be …

Analysis Of Variation Of River Flow And Water Quality In The White River Basin, Michael Stephen Thompson

Electronic Theses and Dissertations

The main objectives of this White River Basin study were to analyze flow variation records, to investigate existing river water quality data as compared with the designated beneficial uses for the basin and to consider the influence of present and future irrigation development. Data were collected from a number of sources and brought together for interpretation with respect to these objectives. The streamflow study utilizes the streamflow records from 10 gaging stations in the White River Basin. It is expected that the results of this investigation may be of assistance to the South Dakota Water Resources Commission and the South …

Experimental Study Of Water Hammer In Buried Pvc And Permastran Pipes, Roland W. Jeppson, Gordon H. Flammer, Gary Z. Watters

Reports

No abstract provided.

Studies To Develop And Investigate An Inverse Formulation For Numerically Solving Three-Dimensional Free Surface Potential Fluid Flows, Roland W. Jeppson

Reports

An inverse formulation is developed for solving three-dimensional potential fluid flows which considers the magnitudes of the cartesian coordinates x, y, and z as the dependent variables in the space defined by the potential function and two mutually orthogonal stream surface functions whose intersection defines the physical space streamlines. This formulation reverses the usual role of the variables. In this inverse space irregular boundaries, with unknown position in the physical space, such as free surfaces become plane boundaries, and the space of most potential flow problems is a parallelepiped. The basin partial differential equations resulting from this formulation are nonlinear …

Chronological Listing Of Research Reports, Division Of Research, Kentucky Department Of Highways

Kentucky Transportation Center Research Report

No abstract provided.

Experimental Overlay Of Glazon Over Two Bridge Decks, Assaf S. Rahal, A. B. Blankenship

Kentucky Transportation Center Research Report

In accordance with a Personal Service Agreement entered into with the Glazon Industries, Inc., on July 2, 1971, the two subject decks were patched and overlayed with Glazon. On July 27, 1971, work started on RP 106-286-HG3, KY 395 bridge over I 64 in Shelby County. Work consisted of routing old concrete and sandblasting the surface (Figures 1 and 2). State personnel and equipment were used for all cleaning operations. The same procedures were followed to clean HM 99-1324A-MB3 in Powell County near Clay City.

On July 28, 1971, Glazon personnel and equipment arrived at the work site in Shelby …

Subject Listing Of Research Reports, Division Of Research, Kentucky Department Of Highways

Kentucky Transportation Center Research Report

No abstract provided.

Test 1094: International Farmall 766 Gasoline, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Comments On “Accelerated Model-Reference Adaptation Via Lyapunov And Steepest Descent Design Techniques”, John S. Pazdera, Hugh F. Spewce

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

The Electric Field Strength Dependence Of Neutron-Induced Defects In Silicon P-N Junctions, Paul Edward Johnson

Masters Theses

"The effect of high electric field strengths (10⁴ to 10⁵ V/cm) present during neutron radiation on the neutron-induced defects is determined by utilizing the high electric field strength inherent in the emitter-base transistion region of an n-p-n transistor. A method is presented for the separation of neutron and gamma effects. Previous theoretical work on the ratio of base current increase to collector current decrease is applied to experimental data. The variations of the space-charge region volume damage introduction rate with neutron fluence and the average electric field strength are determined experimentally in order to obtain a measure of this effect. …

An Experimental Study Of Power Systems, Nguyen Quang Duoc

Masters Theses

"For three phase AC power systems consisting of synchronous machines interconnected by transmission lines and other electrical transmission equipment, the power transmitted and the stability of the system depend upon the constants of synchronous machine and the characteristics of the transmission lines. The purpose of this work is to design and set up a model of a power system in the laboratory, measure the constants of synchronous machines, the power angles and power flows of the system. An investigation of the effects of the saturated machines is based upon the laboratory data.

This work is intended primarily as a tool …

Polynary Silicon Tellurium Glasses, Henry Edward Anthonis

Masters Theses

"The introduction of Ag into Si-As-Te glasses permits the incorporation of Se, otherwise volatile and/or degradable as a constituent in Si-containing chalcogenide glasses. Si-As-Ag-Te-Se glasses exhibit much higher softening ranges and glass transition temperatures than encountered in known chalcogenide systems. A glass Si₃₅As₁₅Ag₁₀Te₂₀Se₂₀ had the viscosity log η =13 at about 500°C, as compared to 370°C for the base glass Si₃₅As₂₅Te₄₀, the viscosity of log η = 9.8 at about 560°C, as compared to 442°C for the base glass Si₃₅As₂₅Te_{40 …}

Wind Tunnel Modeling Of The Atmospheric Boundary Layer, Sreemanth Pagadala

Masters Theses

"The importance of simulating atmospheric flows in wind tunnels has been well established. Experiments were conducted in the Modified Aerodynamic Wind Tunnel to determine the suitability of this wind tunnel for simulating atmospheric flows and the degree to which various aspects of modeling could be fulfilled. A temperature profile to simulate the inversion aloft was generated inside the test section, and then an appropriate velocity profile was built in by means of screen mesh arrangements. The turbulence characteristics of the flow were measured. The validity of the temperature, velocity and turbulence fields were examined. It was found that while the …

Parametric Analyses Of Regenerative Steam Power Cycles, Vallabh Vithalbhai Vaghani

Masters Theses

"This study analyzes the effect of inlet pressures, internal turbine efficiencies, pump efficiencies, extraction pressures and number of open feedwater heaters on the thermal efficiency of regenerative steam power cycles. Combinations of inlet and extraction pressures were introduced into digital computer programs in order to find the optimum extraction pressures for maximum thermal efficiency. The scope of study covered regenerative steam cycles with one, two, three, four, and five open feedwater heaters. One of the principle objectives of the study was to determine if there is some turbine extraction pressure or set of pressures which give maximum thermal efficiency for …

On The Complex Index Of Refraction For Liquids, Juan Guillermo Ochoa Sierra

Masters Theses

"Methods for determining the optical constants, the real and the imaginary part of the complex index of refraction, for weakly and strongly absorbing liquids are reviewed and evaluated. Both reflection and transmission methods were considered and preliminary steps are taken for determining the optical constants for both water and oil in the visible region (0.45 - 0.65 microns) of the spectrum. A low resolution spectrometer was used and the transmission measurements through fuel oil, number 1 through 6, and crude oil were performed. The imaginary part of the complex index of refraction was deduced from the above measurements and appears …

The Analog Simulation Of Heat Transfer Devices For The Smoothing Of A Fluctuating Fluid Temperature, Le Thai Son

Masters Theses

"Equations are written to describe a heat exchanger with electrical energy input and also a large tank system which can have electrical energy input. The output temperatures were sampled and fedback to define the energy input to the two systems. These systems were simulated on an analog computer and the ability of the two systems to smooth a fluctuating temperature input was tested. The testing of the systems included trying different types of controllers in the control system as well as different size tanks for the tank system. A satisfactory smoothing of the output temperature was demonstrated after some modifications"--Abstract, …

An Investigation Of Stage I Fatigue Crack Growth In Fcc, Bcc, And Hcp Metals, Marion Anthony Russo

Masters Theses

"The objectives of this investigation were to 1) determine if Stage I mode or fatigue crack growth could be extended beyond the 45 degree maximum shear plane in metals having a face-centered, body-centered and hexagonal close pack crystal structure; 2) identify the crystallographic planes or crack propagation in Stage I growth in each crystal structure; 3) characterize the fracture surface topography or Stage I growth in each crystal structure. The test material used for this investigation consisted of alpha brass (70% Cu, 30% Zn), Armco iron and commercially pure titanium which are representative of FCC, BCC, and HCP crystal structures …