Digital Commons Network^™

A Methodology For Evaluating The Impact Of Railroad Abandonment On Rural Highways, Lynn Omega Purnell

JTRP Technical Reports

No abstract provided.

Sample Design For Electricity Pricing Experiments: Anticipated Precision For A Time-Of-Day Pricing Experiment, Dennis J. Aigner

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The primary goal of a pricing experiment is basically the same as that for an experiment in direct load control: To discover the effects of time-of-day pricing on the shape of the daily load curve for a particular customer or class of customers. For the pricing experiment, it is also of interest to know how those effects are related to the pricing structure itself.

In this paper, we consider two alternative models of kwh consumption for residential customers as the basis for calculating an optimal experimental design, and compare them in terms of the levels of precision of estimation (for …

Life Cycle Cost Model As Applied To Training Simulators, Frederick Adrian Davis

Retrospective Theses and Dissertations

No abstract provided.

Carbon Removal Of Organohalides In Drinking Water, William Ray Mccurley

Retrospective Theses and Dissertations

Drinking water samples provided by Orlando Utilities from various locations and from Florida Technological University were analyzed for organohalides. Compounds tentatively identified were 0.0024 mg/l DDT, 0.003 mg/l phosdrin, 0.00036 mg/l BHC, and 0.000095 mg/l endosulfan. These concentrations are well below recommended limits for drinking water. Two water samples were mixed with 10 mg/l of 20-40 mesh granular activated carbon, agitated for 2 minutes and then allowed to settle in the flask for 45 minutes. A reduction in the organohalide concentration varied from 25 to 98 percent of the original concentration. Also, a solution of seven common pesticides of 0.1 …

Dynamic And Stability Characteristics Of An Articulated Frame Railway Passenger Truck, David Kenneth Platner

Retrospective Theses and Dissertations

Mass transit vehicles in formal rail service frequently attain speeds which can excited carbody oscillations (primary hunting), as well as sustained lateral oscillations of the trucks (secondary hunting). The carbody motions have been shown to generate passenger discomfort and sustained truck hunting can lead to derailment. This thesis developed approximate equations which predict the carbody hunting frequencies, as well as the hunting speed of an articulated frame truck. The linear equations of motion are derived from a simplified model of a railway vehicle. A comparison indicates the results obtained using the approximate truck hunting equation presented here are within ten …

Stormwater Infiltration Thru Sewer Lines In Brevard County, Florida, Robert Earl Stubbe

Retrospective Theses and Dissertations

This is a broad study of stormwater infiltration and inflow effects on two sewer systems with an equivalent size for comparison in Brevard County, Florida. The systems are Rockledge, which is located on the highest ground in the area, and Cocoa Beach, which is located down in the local water table. Rainfall data, sewage flow, quality, and flow rates were collected from the Brevard Public Health Department, Cocoa Beach and Rockledge sewage Plants, weather stations, and the Cocoa Water plant. The data indicated minimum, or no infiltration thru the Rockledge wastewater collection system. However, infiltration thru the Cocoa Beach system …

Test 1202: Ford 4100 Diesel 8-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS Each tractor is a production model equipped for common usage. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operator station. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures must conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crankcase is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The fuel …

Test 1203: Ford 3600 Diesel 6-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS Each tractor is a production model equipped for common usage. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operator station. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures must conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crankcase is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The fuel …

Test 1204: Ford 2600 Diesel 6-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS Each tractor is a production model equipped for common usage. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operator station. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures must conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crankcase is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The fuel …

Test 1206: Ford 2600 Gasoline 6-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS Each tractor is a production model equipped for common usage. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operator station. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures must conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crankcase is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The fuel …

Test 1207: Ford 2600 And 2610 Gasoline 8-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS Each tractor is a production model equipped for common usage. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operator station. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures must conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crankcase is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The fuel …

Test 1212: White Field Boss 2-70 Diesel (Also White Farm Equipment 2-70 Diesel) 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS Each tractor is a production model equipped for common usage. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operator station. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures must conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crankcase is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The fuel …

Test 1216: International 4568 And 4586 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS Each tractor is a production model equipped for common usage. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operator station. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures must conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crankcase is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The fuel …

Test 1218: Case 1570 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1223: Ford 4600 Diesel 8-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Optimal Process Overdesign With A Flowsheet Simulator, Frank Joseph Doering

Doctoral Dissertations

"Overdesign is applied to chemical processes to include additional equipment for improved process reliability or to account for deviations from average conditions. An efficient method to optimize the overdesign of a complex chemical process is developed for use on a flowsheet simulation program. The effectiveness of the method is demonstrated by simulating the sulfuric acid process with metallurgical feed gas on the flowsheet program PROPS. The process is optimized for reliable and variable performance by the adaptive random search algorithm"-- Abstract, p. xi

Transition Boiling Of Normal Pentane From A Horizontal Flat Gold Surface At One Atmosphere Pressure, R. M. Canon, Efton Park

Chemical and Biochemical Engineering Faculty Research & Creative Works

No abstract provided.

An Examination Of The Adaptive Random Search Technique, M. W. Heuckroth, J. L. Gaddy, L. D. Gaines

Chemical and Biochemical Engineering Faculty Research & Creative Works

Random search procedures have recently been successfully applied to the optimization of a variety of chemical engineering problems, including optimization of chemical processes by flow sheet simulation. These procedures represent the independent variables as random variables described by probability distributions. The adaptive random search procedure centers the distribution for each variable about the best search point found and examines this region for a better point. Thus, this technique has the ability of continuously moving the search region toward the optimum, which is particularly advantageous in following constraints. This study examines the efficiency of the adaptive random search technique as applied …

Mass Transfer To Drops Moving Through Power Law Fluids In The Intermediate Reynolds Number Region, Robert M. Wellek, Türker Gürkan

Chemical and Biochemical Engineering Faculty Research & Creative Works

The mass transfer rate to fluid spheres is calculated for power law and Newtonian fluids by using the intermediate Reynolds number stream functions of Nakano and Tien (1970) and Yamaguchi et al. (1974), respectively. The Sh increases with increases in Re and Pe and decreases in n. Better results are obtained with Nakano and Tien's functions when Re > 10 and with Yamaguchi's functions when Re < 10. Copyright © 1976 American Institute of Chemical Engineers

Mass Transfer In Dispersed And Continous Phases For Creeping Flow Of Fluid Spheres Through Power Law Fluids, Türker Gürkan, Robert M. Wellek

Chemical and Biochemical Engineering Faculty Research & Creative Works

The diffusion equation was numerically solved by an implicit finite-difference method for the purpose of calculating the continuous phase Sherwood number, Sh, for mass transfer from an internally circulating Newtonian droplet traveling through a non-Newtonian power-law-type continuous phase in the creeping flow regime. The Mohan stream functions were used in the calculations in order to approximate the velocity profile inside and outside the droplet. The calculated Sh is presented as a function of the Peclet number, Pe, power-law index, n, and a viscosity ratio parameter, X. Sh increases as n decreases in the pseudoplastic region. The dependence of Sh on …

Generalized Correlations For Molecular Weight And Concentration Dependence Of Zero-Shear Viscosity Of High Polymer Solutions., J. L. Zakin, R. Wu, H. Luh, Kenneth G. Mayhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Results of a study are presented which show that two correlations of viscosity-concentration data are useful representations for data over wide ranges of mol. wt and up to at least moderately high concentrations for both good and fair solvents. Low mol. wt polymer solutions (below the critical entanglement mol. wt M//c) generally have higher viscosities than predicted by the correlations. One correlation is eta //s//p/c left bracket eta right bracket versus k prime left bracket eta right bracket c, where eta //s//p is specific viscosity, c is polymer concentration, left bracket eta right bracket is intrinsic viscosity, and k prime …

A Study Of The Effect Of An Electric Potential On The Saponification Of Ethyl Acetate, Michael Maciupa

Theses

A reactor of rectangular cross-sectional, area was constructed of plexiglass to study the effect of an electric potential on the saponification of ethyl acetate with sodium hydroxide. Three different laminar region flow rates were used and the applied voltage was varied up to four kilovolts in one kilovolt increments for each flow rate. It was found that the apparent rate constant for the reaction was either increased or decreased depending on the voltage and flow rate used. The largest increase was a 4.2 percent change from zero voltage steady state conditions with an applied voltage of one kilovolt at a …

The Fluid Motion Due To A Rotating Disk, Ralph E. White, Charles M. Mohr Jr, John Newman

Faculty Publications

No abstract provided.

Scattering Of Argon And Neon From W(112), Ralph E. White, Jean Jacques Ehrhardt, Robert P. Merrill

Faculty Publications

No abstract provided.

The Effects Of Main-Flow Radial Velocity On The Stability Of Developing Laminar Pipe Flow, F. C.T. Shen, T. S. Chen, L. M. Huang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In studying the stability due to axisymmetric disturbances of the developing flow of an incompressible fluid in the entrance region of a circular tube, a generalized version of the Orr-Sommerfeld equation was derived which takes account of the radial velocity component in the main flow. The new terms in the generalized Orr-Sommerfeld equation are inversely proportional to the Reynolds number. The resulting eigenvalue problem consisting of the disturbance equation and the boundary conditions was solved by a direct numerical integration scheme along with an iteration procedure. Neutral stability curves and critical Reynolds numbers at various axial locations are presented. A …

Installation Induced Stresses For Grouted Roof Bolts, R. N. Nitzsche, Charles J. Haas

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The judicious use of roof bolts in stabilizing underground openings necessitates the ability to determine the state of stress in and around such bolts. A method of modeling a system of roof bolts is presented. This method is then applied in the determination of the state of stress due to bolt tightening. Two specific roof bolt configurations are considered: a fully grouted post-tensioned bolt and a post-tensioned bolt with grouted-end anchorage. The analysis showed that the grout annulus transferred nearly all of the bolt load 3nto the rock within a distance of 12 hole diameters from the point of bolt …

Hydrologic Impact Of Burning And Grazing On A Chained Pinyon-Juniper Site In Southeastern Utah, Gerald F. Gifford, John C. Buckhouse, Frank E. Busby

Reports

No abstract provided.

Heat Pump Research Programme At University College Dublin (1976), Seamus Timoney, Jim Mcgovern

Conference Papers

This paper describes heat pump research at University College Dublin in 1976 relating to an air-to-air heat pump. The plant under test and its instrumentation are described and some measured performance data are presented. A heat pump simulation program is described. A theoretical comparison of refrigerants 12, 22 and 502 is presented with graphs of performance parameters as a function of operating conditions.

Steel Roof Deck Design Manual, Steel Deck Institute

Steel Deck Institute (SDI) Specifications and Manuals (1939 - present)

No abstract provided.

Numerical Simulation Of A Widely Used Cloud Nucleus Counter., Darryl J. Alofs, J. C. Carstens

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The Performance of the Conventional Horizontal Plate Thermal Diffusion Chamber as a Cloud Nucleus Counter Was Studied. Numerical Calculations Were Performed in Order to Follow the Simultaneous Drop Growth and Sedimentation in the Spatially and Temporally Nonuniform Supersaturation Field. the Effect of Nuclei Distribution and Smallest Detectable Drop Size Were Investigated. the Results Indicate Order of Magnitude Uncertainty in the Count at 0. 1% Supersaturation, and a Factor of 2 Uncertainty at 1. 0% Supersaturation.