Digital Commons Network^™

Me3329 Modular Phonograph Gearbox, Garrett Andrik Leighton, Preston Robert Hupe, Gavin Carter Ebner, Andrew Renato Reyes

Mechanical Engineering

The Mechanical Engineering Department at California Polytechnic State University, San Luis Obispo (Cal Poly), seeks to develop a laboratory tool allowing students to reinforce concepts of gears for Mechanical Systems Design (ME329). Some current laboratories do not provide students with hands-on interaction, and the department lacks equipment and documentation to support a standardized lab. With ME329 expanding from ten to fifteen weeks, there is an opportunity to create a physical gearbox design lab allowing students to reinforce lecture material in engaging ways, while standardizing student learning. This senior project is presented and sponsored by Professor Alan Zhang. It will be …

Collagen Gene Expression Is Linked To Aging And Lifespan Extension In C. Elegans, Archer J. Wang, Blake M. Geppert, Daniel Beck, Yanqing Ji, Yiyong Liu

Electrical & Computer Engineering Faculty Scholarship

Collagens, long regarded as structural molecules, also regulate stress responses and longevity. In this study, we analyzed our RNA sequencing data and publicly available gene expression data to define their role in Caenorhabditis elegans aging. Collagen expression broadly declined with age, with 16 collagen genes consistently downregulated across independent studies, establishing collagen downregulation as a genetic hallmark of aging. In contrast, meta-analysis of 66 datasets (128 comparisons between normal and long-lived animals) showed collagen upregulation in 84% of long-lived conditions, identifying collagen induction as a conserved signature of lifespan extension. Using π-values to integrate fold change and significance of …

Low-Cost Path-Loss Characterization For Underground Mine Tunnels Using Lora Transceivers At 915 Mhz, Hilary Kelechi Anabi, Samuel Frimpong, Muhammad Azeem Raza

Mining Engineering Faculty Research & Creative Works

Accurate path-loss models are essential for planning reliable wireless networks in underground mines, yet existing characterization studies rely on specialized channel sounders and vector network analyzers costing tens of thousands of dollars, placing them beyond the reach of most mine operators. This paper demonstrates that LoRa transceivers costing approximately US $15 per node can serve as a self-contained path-loss measurement instrument, logging the received signal strength indicator (RSSI) and signal-to-noise ratio (SNR) directly to a CSV file over a standard USB serial connection. A measurement campaign conducted at the Missouri S&T Experimental Mine on 31 March 2026 collected 4801 packets …

Effect Of Allocation And Allocation Avoidance Methods On Life-Cycle Impact Results For Tellurium Production From Copper Anode Slimes, Ioanna Paschalidou, Kwame Awuah-Offei, Michael Moats

Mining Engineering Faculty Research & Creative Works

The global transition toward green energy has increased demand for metals and intensified the need for sustainable supply sources. Tellurium (Te), an essential metal for photovoltaics technology, is produced primarily as a by-product of copper refinery slimes treatment. This study conducts a life-cycle assessment (LCA) study of Te production to investigate the effect of environmental impact allocation choices on LCA results in multi-product metal systems. A cradle-to-gate LCA model of the Te product system was developed in SimaPro v9.5.0.1 software by combining industrial data, Ecoinvent v3.7.1 datasets, and literature information. Environmental impacts were quantified using the ReCiPe v1.04 Midpoint method …

Western Kentucky University Stormwater Utility Survey 2026, Warren Campbell

SEAS Faculty Publications

In the U.S., more than 2200 stormwater utilities have been enacted. This year, we have expanded the survey to include stormwater utilities in other countries. Many of these stormwater assessments are called taxes, but if the assessment is recurring, is not an ad valorem tax, and is dedicated to stormwater purposes, we call it a stormwater utility. With the help of ChatGPT we have been able to identify 25 stormwater fees in Australia. We were also able to identify 3 in New Zealand, and some in Europe as well.

Leveraging Ict Adoption And Electricity Access For Sustainable Agricultural Productivity Among Nigerian Households, Menghan Huang, Qin Chen, Oluwayemisi Kadijat Adeleke, Mamdouh Abdulaziz Saleh Al-Faryan

The Philippine Agricultural Scientist

This study investigated ICT adoption (mobile phone and internet usage), access to electricity, and their impact on household agricultural productivity in Nigeria, Africa’s largest economy. Utilizing Wave 4 (2018 to 2019) Living Standards Measurement Study–Integrated Survey on Agriculture (LSMS–ISA) data covering 4,980 household heads, this study applied logit regression and Propensity Score Matching (PSM) for estimation, alongside a Cobb-Douglas production function to analyze input contributions to agricultural output. The findings revealed that the age, residential location, educational level, and access to electricity of household heads significantly determine technology adoption among farming households. Furthermore, ICT adoption exhibits a significant, positive relationship …

Evaluation Of Alternative Solvents For Electrospinning Occluded Scaffolds To Model Intracranial Atherosclerotic Disease In Blood Vessel Mimics, Olivia D. Rankin

Master's Theses

Intracranial atherosclerotic disease (ICAD) is characterized by a buildup of fatty plaque within the walls of arteries supplying the brain, resulting in vessel narrowing, restricted blood flow, and increased risk of ischemic stroke. While various treatments exist for ICAD, most are accompanied by high recurrent stroke rates and other adverse events, highlighting the need for further investigation and models for pre-clinical testing. Tissue engineered Blood Vessel Mimics (BVMs), consisting of a polymer scaffold sodded with human vascular cells, serve as physiologically relevant in vitro models for vascular device testing. This thesis focused on the application of alternative solvents to a …

Matlab Shake Table Control And Data Acquisition System, Abigail Austin

Architectural Engineering

The College of Architecture and Environmental Design’s (CAED) seismic laboratory shake table is used for earthquake engineering education and experimental testing. However, the existing control system is outdated and difficult for students unfamiliar with the system to operate. The objective of this project was to develop a MATLAB-based control and data acquisition application to simplify shake table operation and improve accessibility, of both operation and output, for student users.

The developed application imports earthquake acceleration records, scales the input motions to the operational limits of the shake table, and executes the desires motion through the existing hardware system. Experimental data …

Development Of Kytc’S Context Classification Network, Jill Asher, Megan White, Eric Green, Christopher Van Dyke

Kentucky Transportation Center Research Report

Transportation agencies have adopted context-based classification systems that classify roadways based on the surrounding environment and user types. This offers a more comprehensive and multimodal perspective than traditional functional classification. While the Kentucky Transportation Cabinet (KYTC) has begun using project-level context classification, the agency will benefit from introducing network-level context classification. This will improve guidance, enhance project prioritization, and support the development of projects that better address the needs of all users. Responding to this need, Kentucky Transportation Center (KTC) researchers, in conjunction with KYTC staff, created a GIS-based model to build a context classification network that covers all state-maintained …

Electrically Evoked Emg Decomposition Using The Perturbative Generalized Series Expansion, William R. Walker

Master's Theses

Electrically evoked electromyography records the muscle's response to nerve stimulation and has been used for clinical assessment of neuromuscular function, as well as treatments such as functional electrical stimulation or stroke rehabilitation. In every muscular contraction, an electrical signal is generated. These signals come from the summation of simultaneously recruited motor units, enabling decomposition techniques to reveal information about motor unit recruitment.  By improving the ability to decompose and analyze these signals, clinical treatments involving neuromuscular electrical stimulation can be optimized and better understood. Much of the research on EMG analysis focuses on voluntary EMG, leaving a gap in the …

Develop & Test Radar Assignments For Future Graduate Curriculum, Thomas Ky Hong, Christopher William Hoferer

Electrical Engineering

With Cal Poly’s switch to semesters, many upper-level electives lack enough depth and structured content for the new 15-week format. In addition, while the Electrical Engineering department currently offers approximately five weeks of RADAR-focused laboratory material within EE 424: Intro to Remote Sensing, this limited exposure is insufficient to provide students with a comprehensive understanding of RADAR theory and practical applications. The semester conversion presents a timely opportunity to expand this existing five-week RADAR segment into a full 15-week course that integrates both lecture and laboratory content. To address the current curriculum gap, we have seamlessly extended the RADAR exercises …

Vision-Guided Motion Planning For Autonomous Catch With A Robotic Arm, Kayla Go-Oco, Ashik K. Islam, Raegan Gritzmacher

Electrical Engineering

Modern robotic systems are often evaluated using static and highly controlled tasks, such as pick-and-place demonstrations, which do not fully represent the uncertainty and adaptability required in real-world environments. A major challenge in robotics research is enabling robotic systems to perceive, track, and respond to dynamic objects in real time while maintaining accurate and reliable motion control. This project addresses these challenges by developing an autonomous robotic platform in which an OpenMANIPULATOR-Y robotic arm detects, tracks, and attempts to catch a moving tennis ball using a vision-guided control system. The system integrates YOLO-based object detection with an Intel RealSense D455 …

Shared Language For Responsible Ai Integration, Asa B. Stone, Mark C. Stone, Alisha Bevins, Jean Claude Niyomugabo, Irene Magara, Jacob Abaare, Derek M. Heeren, Mubarak Abu Zouriq

PRAIRIE: Pioneering Responsible AI for Research, Innovation, and Education

As AI rapidly reshapes how we work and learn, employers increasingly seek graduates who can think before they prompt, exercising judgment under pressure rather than merely producing output. Yet students are praised for AI use in one course and penalized for it in the next, and faculty are left to lead responsibly on shifting ground, with no shared language to guide them.

This paper introduces the PRAIRIE Framework for AI Integration, a shift from reactive gatekeeping toward proactive stewardship. It emerged from a qualitative sentiment analysis of three communities (students, faculty, and industry partners) whose concerns converged on one need: …

Teaching Learning Newsletter Vol 6 Issue 1, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

Emerging Biomaterials For Next-Generation Wound Healing: From Infection Control To Tissue Regeneration, Unqa Mustafa, Aiman Kaleem, Syeda Zunaira Bukhari, Hamna Riaz, Maryam Iftikhar, Muhammad Usman Munir, Xianghao Xiao, Mingwu Shen, Xiangyang Shi, Mostafa Yazdi, Ayesha Ihsan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Wound healing is a multifactorial biological process that regenerates damaged tissues through a series of molecular and cellular events in a coordinated manner. An interruption in this cascade can lead to impaired healing, especially in diabetic complications, where effective treatment is crucial for controlling infections and promoting tissue regeneration. Recent advances in bioengineering and digital health have catalyzed the development of next-generation wound therapies capable of actively modulating the wound microenvironment, promoting regeneration, and enabling real-time clinical assessment. This review summarizes the fundamentals of physiological wound healing and highlights the significant developments in biomaterial dressings and scaffolds, 3D bioprinting, as …

Validation Of Electromagnetic Shower Development In A Reduced Alice Focal-E Detector Model Using Geant4, Isaac Lara Romo

Physics

This project focuses on the preliminary simulation of a reduced FoCal-E detector model for the ALICE experiment at CERN. Beamline tests were simulated using an electron gun at various incident energies, and the results were compared with those of the FoCal group. The longitudinal charge deposition per sensor layer was compared between the two setups to verify that the reduced model exhibited expected calorimeter behavior. Additionally, the transverse signal across the high-granularity sensor layers was examined to determine whether the reduced model reproduced the expected lateral development of electromagnetic showers. The results obtained from these measurements show that the reduced …

Tracking Continuous Non-Differentiable Trajectories In Euler–Lagrange Systems With Continuous Dynamics, Nilay Kant

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Tracking controllers for Euler–Lagrange systems are designed under the assumption that reference trajectories are continuous, and at least twice differentiable with respect to time. However, this assumption precludes several use cases, such as when a robot end-effector must track a path with corners at constant speed. This paper introduces the control design for tracking continuous but non-differentiable trajectories in fully actuated Euler–Lagrange systems that have continuous-time dynamics. The proposed controller combines a continuous feedback law with impulsive inputs, that are intermittently applied at the instants of non-differentiability. A Lyapunov stability analysis establishes global exponential convergence of the tracking error to …

A Carbon Fiber-Based Self-Sensing Approach For Monitoring Damage Evolution In Coal Pillars, Shan Ning, Weibing Zhu, Jie Gao, Wei Qin, Guang Xu, Jingmin Xu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Under long-term high stress and dynamic disturbances, damage accumulation within underground coal masses can induce sudden instability, posing a considerable threat to coal mine safety. Real-time acquisition of coal damage information is essential for disaster prevention and control. This study proposes a coal damage and fracturing monitoring approach based on a carbon fiber composite mortar (CFCM) coating. By applying the CFCM coating to coal specimen surfaces and monitoring resistance changes, the dynamic evolution of damage can be tracked. The study combines experimental mechanical loading, continuous electrical resistance monitoring and acoustic emission recording with detailed numerical modelling to comprehensively evaluate sensing …

Evaluation Of The Effect Of Vibration On Signal Reflection In Coaxial Cable Connectors For Vibration Sensing In Aircraft Structures And Systems, Saidanvar Esanjonovich Valiev, Anthony C. Okafor, Jeremiah J. Rittenhouse, Daniel S. Stutts, Jie Huang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper investigates the effects of vibration on signal reflection (S11) in aerospace data transmission line (ADTL) and commercial data transmission line (DTL) connectors for their alternative use as vibration sensors. The impact of vibration on the S11 signal was investigated on five ADTL and four DTL connectors at six vibration frequencies (20 Hz, 40 Hz, 80 Hz, 160 Hz, 320 Hz, and 640 Hz) and four vibration accelerations (0.5G, 1 G, 2 G, and 4G). The experiment was conducted using a split-plot design with a cable type assigned as the main-plot factor, with vibration frequency and acceleration as subplot …

Eliminating Barriers For The Implementation Of Automation In The Mining Industry, Sefiu O. Adewuyi, Kray Luxbacher, Kanagy David, Miller Ben, Miller Hugh, Michael Moats, Savit Mark

Materials Science and Engineering Faculty Research & Creative Works

The integration of new technologies into U.S. mining operations is necessary for achieving continuous improvement in worker health and safety, as well as improving operational efficiency, but many have questioned why uptake of autonomy in the U.S. mining industry has been slow compared to other nations. Despite extensive research on mining automation, there remains a critical gap in understanding and systematically identifying the barriers to its adoption within the U.S. mining industry and globally. To quantify these barriers, a workshop model of data collection was employed. A total of 708 invitations were extended to professionals to participate in nine different …

Robotic-Assisted Pedicle Screw Placement Achieves High Accuracy And Narrows The Experience Gap: A Preclinical Evaluation, Anna T. Reza, Matthias Walper, Mitchell K. Ng, Paul G. Mastrokostas, Andrew S. Lee, Rafael G. Rafael, Kornelis A. Poelstra, Ratliff K. John, Rajiv K. Sethi, Michael A. Mont

Rothman Institute Papers

To assess a robotic-assisted system versus open manual techniques to: (1) compare pedicle screw accuracy between fellows and attendings with and without robotic assistance, and (2) evaluate executed versus planned trajectory fidelity relative to prior reports. Robotic-assisted spine systems aim to improve the accuracy, reproducibility, and safety of pedicle screw placement. Limited evidence compares outcomes across differing surgeon experience levels. A total of 255 thoracolumbar pedicle screws were placed in synthetic torsos simulating adult degenerative anatomy. Four surgeons (two fellows, two attendings) each placed half their screws using open fluoroscopy-guided techniques and half using a minimally invasive percutaneous approach with …

Sanitizing Manufacturing Dataset Labels Using Vision-Language Models, Nazanin Mahjourian, Vinh Nguyen

Michigan Tech Publications

The success of machine learning models in industrial applications is heavily dependent on the quality of the datasets used to train the models. However, large-scale datasets, especially those constructed from crowd-sourcing and web-scraping, often suffer from label noise, inconsistencies, and errors. This problem is particularly pronounced in the manufacturing domain, where obtaining high-quality labels is costly and time-consuming. This paper introduces Vision-Language Sanitation and Refinement (VLSR), which is a vision-language-based framework for label sanitation and refinement in multi-label manufacturing image datasets. This method embeds both images and their associated textual labels into a shared semantic space leveraging the CLIP vision-language …

Project Strata, Hobbs Hegedus, Antony Chen, Adrian Scancich, Peter Constantine Psefteas, Ryan Kreis Roth, Jack Douglas Mitchell

Mechanical Engineering

Project STRATA is a lunar sample acquisition and storage system developed in support of NASA’s Artemis mission objectives and the 2026 NASA RASC-AL competition. The overall mission concept utilizes a dual-rover architecture consisting of HARVEST, a sample collection rover, and SILO, a storage rover designed to preserve and organize lunar ice-regolith core samples collected from permanently shadowed regions (PSRs) near the lunar south pole. These regions contain scientifically valuable volatile-rich materials but present significant challenges due to extreme cryogenic temperatures, abrasive lunar regolith, and the absence of solar energy.

This report is a collection of all major work from the …

Custom Animatronic Puppet, Jake Schuman, Fredy Herrarte, Madison Reedy, Jackson Reynolds

Mechanical Engineering

This project involved the design, fabrication, and implementation of a custom audio-animatronic puppet modeled after Dr. Brian Davis for the California Polytechnic State University Mechanical Engineering Department. The objective was to create an expressive, lifelike character capable of synchronized speech, head movement, arm gestures, and seated-to-standing motion while demonstrating the integration of mechanical design, controls, manufacturing, and artistic fabrication.

The final system consists of an 18-degree-of-freedom animatronic platform utilizing servo-driven facial and upper-body actuation combined with a pneumatic standing mechanism. A modular aluminum and 3D-printed structural framework was developed using SolidWorks and validated through engineering analysis. Character shells were digitally …

Compressor Rotor Joints And Interference Fit Study, Isabela Jimenez, Aubrey Perez, Isaiah Guerrero, Jireh Velasquez

Mechanical Engineering

Solar Turbines need a comprehensive study on the effects axial and radial inference fits have on turbine compressor rotor stiffness. The aft weldment of the compressor has press-fit dowel pins and pilot joints to connect one weldment section to another. These fits need to be assessed through a finite element modal analysis, as well as practically tested through modal impacts to investigate how the fits affect the stiffness of the turbine’s connected weldments. The experimental data will be used to validate the finite element analysis (FEA) model.

Raytheon Rtx Autonomous Vehicle Competition (Avc) - Unmanned Ground Vehicle (Ugv), Bryant Jonathan Martinez-Bautista, Geovanni Lara, Jared Herrera, Jose Barrera

Mechanical Engineering

Raytheon RTX has four universities participating in a competition to successfully complete various challenges with a UAV and UGV including navigation and landing. The students must work collaboratively to integrate and manufacture a working UGV that is compatible with the UAV.

Our sponsor is Raytheon, more specifically Mr. Luis Esparza. Important stakeholders also include Cal Poly and the entire team of ME & CPE working on the project. Raytheon and Luis are looking for innovative solutions that can be applied for real world scenarios where UAV’s and UGV’s are applied. Cal Poly is gaining recognition, and the team is gaining …

Peltier-Based Hydration Accumulation Terminal (P.H.A.T.), Jenner Mucher, Ethan Pace, Renee Robolledo, Sabrina Luo, Taehoon Lee, Tarsem Pal

Mechanical Engineering

The objective of this project is to design an innovative potable water dispenser capable of safely delivering hot, ambient, and chilled water on demand for human lander missions. The system will support astronauts’ hydration and food rehydration needs while minimizing mass, power, maintenance, and contamination risks in microgravity and partial-gravity environments. Current spacecraft dispensers, such as the International Space Station (ISS) system, provide only heated water and have limited temperature control, cleaning accessibility, and microbial resilience. Building on NASA heritage designs and lessons learned from the ISS Potable Water Dispenser, this project advances a lighter, simpler, and more energy-efficient concept …

Mass - Modular Acoustic Suppression System, Julia Megargle, Michael A. Milner, Lucas Kaemmererer, Jonathan Corvera, Gabriel Choi, Emmi Cayer

Mechanical Engineering

The Modular Acoustic Suppression System (MASS) is a mass tuned damper that reverberates a membrane atop a cavity to absorb select acoustic frequencies produced by the Environmental Control and Life Support Systems (ECLSS) within NASA's Artemis Human Lander. The height of the reverberation chamber is adjusted to mitigate a range of varying tonal frequencies within the human lander.

Electronic Bike Chopper, Caleb S. Bermack, Joey Lederer, Ethan Dea, Evan Herrera, Fred Agregado

Mechanical Engineering

Our sponsor, David Royce, built an initial e-bike chopper prototype and desired an improved, next generation version. Our team designed and manufactured an electric bicycle to achieve the rugged visual style of a classic chopper motorcycle while improving stability and usability. The team built a functional E-Chopper prototype using a 4130 steel frame, custom dropouts, a long front fork, wide rear tire, ape-hanger handlebars, and prebuilt electric components such as the battery, hub motor, controller, throttle, and display. The design focused on reducing excess weight, improving frame rigidity, and meeting California e-bike regulations.

Me3328 Buckling Lab, Willem Bitterolf, Samantha Flores, Jacy Gonsalves, Brooke Thompson

Mechanical Engineering

The objective of this senior design project is to design and develop an instructional buckling apparatus (hereafter referred to as a “buckling tester”) to enhance student comprehension of column buckling behavior through direct experimental investigation. The apparatus is specifically intended to bridge the gap between theoretical predictions and observed physical response of structural column members subjected to axial compressive loading. In particular, the system will allow students to examine how column behavior transitions between Euler’s elastic buckling theory, which governs long, slender columns, and the Johnson parabolic formula, which more accurately describes intermediate and shorter columns influenced by material yielding. …