Digital Commons Network^™

Minimum Variable Speed Control Moment Gyros (Vscmg) Cluster Sizing For Full Three-Axis Smallsat Attitude Control: A Numerical Study, Khang Nguyen, Christopher Damaren

Small Satellite Conference

Small satellites demand high-resolution imaging, optical inter-satellite links, precision science — demand agile, accurate attitude control under tight mass, volume, and power.

Momentum-exchange actuators are the standard propellant-free solution:

• Reaction wheels: precise, but low torque authority
• CMGs: high torque, but singularity-prone
• VSCMGs: variable wheel speed and gimbal angle → high torque, added DOFs for singularity avoidance, dual RW/CMG operation

The gap: VSCMG research has focused on 4-unit pyramid clusters, whose redundancy costs actuator count, volume, and power — resources SmallSats can least afford. The minimum cluster size for practical three-axis control is not well established.

Mission-Driven System-Level Design Of A 1u-Constrained Reaction Wheel Assembly For Agile Cubesat Missions, Xixi Zhang, Ghadi M. Al-Amer, Teef A. Alharthi, Yaqin Saada, Shouq J. Alabdullah, Fadil M. Younes, Atif Mahmood, Ayman M. Abadallah

Small Satellite Conference

Mission need:

Single-pass multi-strip imaging compresses repeated retargeting and settling into a 3- 4 min imaging window.

Relative Position Determination For Satellite Formation Flying Using Radio-Wave Strength Considering Antenna Deformation, Sho Watanabe, Takaya Inamori, Yosuke Kawabata

Small Satellite Conference

Background:

Increasing use of formation flying in space missions:

• Requires formation establishment and maintenance
• Relative orbit determination is essential

Conventional Methods

• Camera
• Laser
• GNSS

Large size and mass are mostly required

Depends on the orbit and satellite attitude

Using received signal strength can overcome these limitations.

Lighting Up The Moon: A Scheduling Framework For Cislunar Space Based Solar Power Orchestration, Vaibhav Bhosale, Andrew Woo, Ada Gavrilovska, Christopher R. Valenta, Ketan Bhardwaj

Small Satellite Conference

Surviving the Lunar Night

• 14 Earth day lunar nights
• More batteries, more mass, higher cost

Ground-Based Magnetic Attitude Determination For Low-Cost Cubesat Missions, Johnny Mccaskill, Evan Jellison, Jackson Holden, Blagoy Rangelov

Small Satellite Conference

This work presents the development and validation of a low-cost attitude determination approach for small satellites operating in low Earth orbit using only magnetometer data. The proposed method leverages measurements of Earth’s magnetic field collected by onboard magnetometers in conjunction with orbital information processed on the ground. By comparing observed magnetic field vectors with reference values generated from the World Magnetic Model, the system estimates the satellite’s orientation with minimal onboard processing requirements. The resulting attitude solution is then transmitted back to the spacecraft for potential use in attitude control or mission planning.

Because all computation occurs on the ground, …

Toward Trainable Ai Agents For Satellite Operations, Haley Calderon, Vaibhav Bhosale, Ketan Bhardwaj, Ada Gavrilovska

Small Satellite Conference

Low Earth orbit is increasingly crowded, and a growing share of it is flown by universities and small operators. These teams must detect and respond to on-orbit anomalies with far less staff, expertise, and tooling than large operators, and a single missed anomaly can end a mission. We present COMET, a ground-based operator agent that helps a small team both detect anomalies and diagnose them. COMET pairs a learned detector with a retrieval-augmented diagnosis stage. An LSTM autoencoder flags anomalous telemetry windows, and a language model explains each one against the mission’s own documentation, procedures, and prior operational records. Because …

In-Transit Debris Remediation: Dual-Use Logistics For Sustainable Cislunar Smallsat Constellations, Wanjiku Chebet Kanjumba

Small Satellite Conference

A Debris Crisis Meets A Logistics Boom: Low- and high-Earth orbit keep accumulating debris faster than the atmosphere can clear it, even as NASA's Artemis and CLPS programs establish routine trans-lunar traffic. The 2009 Iridium-Cosmos collision and later anti-satellite tests proved that single fragmentation events can irreversibly degrade critical orbital shells, raising the specter of Kessler Syndrome. 

• 46,600+ objects tracked on orbit today, with ~130 million sub-cm fragments (ESA, 2025)
• $500K-$2M cost per kilogram for dedicated ADR, fiscally intractable at system scale
• 5-10 / yr large objects must be removed to stabilize LEO (Liou & Johnson)

The Unit-Economics Problem: Purpose-built …

Autonomous Microelectronics See Payload For Validating Terrestrial Predictions In Space, Michael A. Blacconiere, Isaac Hudson, John W. Burgoon, Terrance Sacks, Spencer Westfall, Sajal Islam, Davidson Juhke, George Randel, Jared Harvey, Merek Chertkow, Daniel Loveless

Small Satellite Conference

The radiation environment in space is complex and time-varying, causing major risks for microelectronic applications. Terrestrial radiation sources are used to characterize devices before missions to predict in-orbit error rates. However, these predictions are rarely validated in deployment. The payload, designed by IU CREATE and The Radiation Team, the IUB-SAT-1, integrates IU’s RadFX-IC and commercial SRAMs with well-characterized terrestrial radiation responses into a modular payload to collect on-orbit radiation-response data. Results will refine radiation error-rate models and improves confidence in deploying advanced microelectronics to radiation-rich space environments.

A Comparative Analysis Of Radio Frequency And Optical Inter-Satellite Link Communications For Leo Mega-Constellations, Alexa Houck, Suryansh Aryan, Kevin Schroeder, Samantha Kenyon

Small Satellite Conference

SpaceNet design  

Software-based testbed for simulating large satellite networks, specifically LEO-based constellations to analyze network behavior, connectivity, routing, and overall communication.  

• Phase one focuses on connectivity and routing: Given the topology and link availability over time, how does my network behave? 
• Phase two focuses on network emulation: Given the topology and link availability over time, how does my network behave? 

Austronauts 3u Cubesat Space Weather Payloads Proposal, Tiana Pendray

Small Satellite Conference

CubeSats are becoming increasingly prominent due to their accessibility, affordability and versatility. An emerging field of satellite application is the monitoring of ionospheric space weather, made possible by sensitive instruments that collect data on plasma potential, temperature and ion density. These parameters vary due to changing solar activity in the form of Coronal Mass Ejections (CMEs) and solar flares, which can have severe impacts on satellite navigation systems, radio communication networks and orbital estimations. The AUStronauts team at the University of New South Wales is developing a 3U CubeSat with two space weather payloads – an Electrodynamic Tether (EDT) and …

Numerical Characterization Of Phase Coherence In Distributed Smallsat Sar Interferometry, Cameron Kaminski

Small Satellite Conference

Distributed SmallSat SAR requires independent spacecraft to maintain phase coherence over long integration times. This work presents a Monte Carlo simulation that combines manufacturer-derived oscillator phase noise, spacecraft thermal dynamics, and orbital perturbations to evaluate passive coherence limits. The results show that oscillator quality alone is insufficient; differential thermal-state evolution becomes a dominant driver of long-duration coherence performance.

Promoting Assured Formation Flight Autonomy Onboard Resource Constrained Systems, Ryan Johnson, Maggie Michelsen, Jackson Gardner, Mario Harper, Charles Swenson, Jackson Kulik, Shawn Jones

Small Satellite Conference

Autonomously determining fuel-optimal, formation-keeping trajectories for small spacecraft operating in formation flight is often limited by available processing power. Because SmallSat missions are constrained by size, weight, and power (SWaP), field-programmable gate arrays (FPGAs) are an attractive option for onboard computing. Traditional formation-keeping relies on convex optimization to solve for fuel-optimal burns and burn times; however, implementing these solvers on FPGAs is challenging due to limited board resources.

To address the need for fast, reliable trajectory planning onboard space vehicles, we investigate leveraging machine learning to reduce computational cost for real-time, onboard execution. We propose using a deep neural network …

Onboard Ai At The Orbital Edge: A Mission Debrief From Stp-H7-Caspr, Evan W. Gretok, Linus Silbernagel, Diego Wildenstein, Michael J. Cannizzaro, Seth Roffe, Alan D. George

Small Satellite Conference

Goals: Enable autonomous Earth observation and onboard sensor data processing with novel compute

Motivations: Growing numbers of spacecraft demand autonomy in operation and data collection

Challenges: Harsh radiation and thermal environment of space over four-year mission lifetime

Squidsat: A Modular, Open-Source 3u Cubesat Bus For Low-Cost Cubesat Missions, Aaron Bournias, Joseph Dukowitz, Mark Jaber, Tyler Field, Micah Nguyen, Koowum Joshi, Noah Campos, Daphne Riordan, Ryan La Ra, Jonathan Luse, Joshua Sink, Tyler Nielsen, Ricardo Ontivaros, Michael Goryll, Joe Dubois

Small Satellite Conference

CubeSat launches continue to increase yearly, yet over 51% of missions from 2002–2016 failed. Primary faults were often due to power, mechanical, or design issues. Costs still remain high in a market driven by expensive flight-heritage hardware with proprietary designs. In order to counteract such costly practice, Sun Devil Satellite Lab (SDSL) at ASU has developed an open-source, modular 3U CubeSat bus built for low cost reliability. Unlike other bus architectures, SquidSat distributes control across independent microcontrollers linked via a CAN bus. CAN is commanded by the OBC but is capable of independent operation for fault isolation and easier testing. …

Experimental Investigation On Nanocellulose And Aluminium-Oxide Hybrid Nanofluid As A New Coolant For Radiator, D. Ramasamy, Sivaraos Sivaraos, K. Kadirgama

The Nexus of Sustainability and Energy Technology Journal

Improved efficiency leads to more compact design of the radiator. The research is conducted to prove that addition of Aluminium Oxide and nanocellulose originating from plant base with varying concentration provides a better thermal efficiency compared to usage of distilled water as radiator coolant. The objective of the research is to improve a new radiator coolant based on combination of aluminium oxide and nanocellulose with readily available coolants which is Ethylene Glycol and to investigate the erosion of nanocellulose coolant on automotive radiator. The scope of the research are the nanocellulose dispersed in base fluid which is from 60:40, (EG:W). …

Effects Of Air Injection Styles And Burner Geometry On Blowoff In Premixed Swirl Flame, Haidar Ali Janna, Zaid Aldulaimi, Mohammed Alfahham

The Nexus of Sustainability and Energy Technology Journal

Understanding the effect of air injection strategies and burner configuration on flame stability is essential for preventing blowoff in premixed swirl combustion systems. This experimental study investigates the blowoff limits of liquefied petroleum gas (LPG) flames in tangential swirl burners with two different geometries,namely two-inlet and three-inlet designs, while maintaining the same geometric swirl number and swirl strength. Two air injection strategies were examined:axial air injection which introduced through the burner base plate,and an air curtain system supplied through the inner circumference of the burners nozzle. Blowoff limits were recorded over a wide range of operating conditions to quantify the …

Implementation Of 4-Ir In Scm Of Woven Apparel Industry – A Case Study In Bangladesh For Prosperity And Sustainability, Kaniz Farhana, Nazibah Nowreen Onadee, Farhana Mabia Mim, Fuzail Ahmed Khan Rajit, Md. Fahad Faruk Pavel, S.M. Farhana Iqbal, Abu Shadate Faisal Mahamude

The Nexus of Sustainability and Energy Technology Journal

The significance of the Fourth Industrial Revolution (4-IR) for supply chain management (SCM) in the woven clothing industry is emphasized by this survey study. The implementation of cutting-edge technologies that can improve these aspects, like IoT, RFID, blockchain, big data analysis, cybersecurity, and automation, is examined from the viewpoints of woven clothing manufacturers. This investigation seeks to determine Bangladesh's key technological barriers as well as the primary motivator for the weaving RMG's adoption of cutting-edge technologies. Here, a combination of methods, including fieldwork and data collection, has been performed for thorough analysis. The research outlines the current state of affairs …

Evaluation Of Graphene Cathode And Aluminum Ion Ev Battery Performance: A State-Of-The-Art Analysis For Future, Abu Shadate Faisal Mahamude, Kaniz Farhana

The Nexus of Sustainability and Energy Technology Journal

Lithium-ion batteries may eventually be replaced with rechargeable aluminum-ion batteries (AIBs) due to their high energy density, increased safety, and plentiful supply of raw materials. The development of appropriate cathode materials for AIBs is a major priority these days. As a result of their better quality, graphene-based cathodes have a great chance of success. Graphene is a relatively new and promising material with a unique set of chemical and physical characteristics. Graphene's high electron conductivity and large specific surface area make it seem like one of the best electron-conducting additions, but there are several other ways to increase the cathode …

Atomistic Insights Into The Interfacial Properties And Thermal Transport Of Mxene–Copper Nanocomposites: A Molecular Dynamics Study, Navid Aslfattahi, Maryam Sadat Kiai, K. Kadirgama, L. Samylingam, Chee Kuang Kok, Mohd A.F. Rosli, Thong Leng Lim

The Nexus of Sustainability and Energy Technology Journal

Understanding the interfacial heat transport mechanisms in Ti₃C₂T_x–copper nanocomposites is essential for developing advanced Thermal Interface Materials (TIM) for electronic and energy systems. This study provides atomistic insights into how MXene surface terminations (–O, –OH, –F), copper crystallographic orientations ((111), (100), (110)), and MXene layer thickness influence thermal conductivity and interfacial thermal resistance. O-terminated MXene exhibited the strongest interfacial adhesion (∼0.45 J/m²) and the highest thermal conductivity (∼68 W/m· K), while F-terminated MXene showed the weakest interfacial bonding and poorest heat transfer (∼45 W/m· K). Increasing the MXene thickness introduced additional phonon …

Synergistic Reinforcement Of Lignin–Chitosan Hydrogels Using Vanillin As A Sustainable Green Crosslinker, Moses Ayitey-Adjin Jr., Mohammad Jahid Hasan, Jeremy Erb, Kishore Chand, Garry S. Crosson, Kenya Crosson, Esteban Ureña-Benavides, Erick Salvador Vasquez-Guardado

Chemical and Materials Engineering Faculty Publications

While bio-based hydrogels derived from lignin and chitosan are promising sustainable adsorbents, their practical application is hindered by poor mechanical stability. This study addresses this limitation by synthesizing lignin-chitosan hydrogels using vanillin as a green, bio-derived crosslinker via a facile solution-casting method. The formation of imine (Schiff base) linkages between the aldehyde groups of vanillin and the primary amines of chitosan was confirmed by FTIR spectroscopy (C = N stretching at ~ 1602 cm^− 1). SEM and TGA results demonstrated a reduction in the pore size of the crosslinked hydrogel and an enhanced residual thermal mass. Rheological and …

Ensuring Safety In Battery Management Systems: A Control Barrier Function Approach, Magdalena Kossek

Electronic Theses and Dissertations

Safe and efficient operation of batteries is paramount to extending their lifespan and ensuring reliability in battery management systems. This work presents a new approach for maximizing safety and performance of lithium-ion batteries in a variety of applications with a view towards efficiency in computation. The aim is to maximize a battery’s output (its power, speed of charging, and overall efficiency) while preserving its longevity and ensuring operational safety. This challenge is tackled by developing a novel control algorithm for advanced lithium-ion battery management leveraging control barrier functions (CBFs) to ensure safe and efficient operation during fast charging and discharging. …

Field-Like- And Self-Spin-Orbit Torques In Magnetic Multilayer Films, Kyle Jeffrey Peterson

Electronic Theses and Dissertations

Spin-orbit torques (SOTs) have been realized as an energy efficient mechanism to manipulate and drive magnetization dynamics in magnetic multilayer films. Their damping-like and field-like components provide distinct pathways for controlling the magnetization, enabling switching, sustaining magneto-oscillations, and driving domain-wall motion with potential applications in nonvolatile memory, spin-based logic, and microwave signal generation. However, the accurate quantification and interpretation of these torques remains complicated by experimental sensitivity, the co-symmetry of the Oersted field and the effective field due to the field-like torque, and assumptions regarding the material layers from which the torques originate. The body of work set forth in …

An Investigation Of Pelvic Kinematics And Implications For Total Hip Arthroplasty, Kathryn Holland Colone

Electronic Theses and Dissertations

Total hip arthroplasty (THA) is one of the most commonly performed orthopaedic procedures, with approximately 500,000 surgeries performed annually in the United States alone. Although THA is widely regarded as highly successful, postoperative complications persist, highlighting the multifactorial nature of THA outcomes. Previous studies have demonstrated the importance of implant positioning and soft tissue mechanics, yet challenges remain in optimizing surgical decisions on a patient-specific basis. Recent advances in surgical planning tools have shifted the focus of preoperative planning toward optimizing patient-specific outcomes, highlighting the need to better understand how patient anatomy, surgical technique, and joint mechanics interact to influence …

Techno-Economic Analysis Of Implementing Carbon Capture And Storage (Ccs) At The Punagaya 2×100 Mw Coal Power Plant, Ricky Andreas Kristianto Siringoringo, Rahma Muthia, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

The increase in greenhouse gases due to the combustion of fossil fuels is one of the major drivers of global warming and consequently drives the development of low-carbon technologies such as Carbon Capture and Storage (CCS). The aim of this study is to evaluate the technical and economical feasibility of the implementation of CCS technology in the Punagaya Subcritical Coal-Fired Power Plant (CFPP) 2×100 MW as a part of the energy transition strategy towards Net Zero Emissions (NZE) 2060. The simulation was carried out using Aspen HYSYS software, including coal combustion, CO₂ capture through MDEA-PZ solvent, dehydration, transportation, and storage …

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa

Journal of Materials Exploration and Findings

This study investigates the application of red palm oil (RPO) as an alternative vegetable oil resource to substitute petroleum-based plasticizers, which have environmental and health concerns, in carbon black (CB)-filled SSBR/BR tire tread compounds. The plasticizing effects of RPO were thoroughly evaluated by comparing them with a commercial bio-based plasticizer, Epoxidized Soybean Oil (ESBO), and two safer petroleum-based oils, Naphthenic Oil (NYNAS) and Treated Distillate Aromatic Extract (TDAE). The initial investigation shows that fatty acid composition is imposing regarding the plasticizing effect. The higher unsaturated fatty acid content in RPO than in ESBO improved tensile strength and degraded rolling resistance …

Techno-Economic Analysis Of The Utilization Of Waste-To-Energy In Jakarta Industrial Estate Pulogadung, Wahyu Punjung Pesonagrata, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

Indonesia has a serious waste problem, which ranking second in marine pollution. Due to significant environmental impacts, a solution to overcome the complexity of waste problems is needed. This study took sample on waste management in Jakarta Industrial Estate Pulogadung (JIEP). JIEP is an Industrial area which covers 443 hectares of land in East Jakarta. This study aims to address Indonesia's serious waste problem by exploring the potential utilization of waste in the Jakarta Industrial Estate Pulogadung (JIEP) as Refuse-Derived Fuel (RDF) for a waste-to-energy (WtE) power plant. The proposed method used a steam power plant with RDF as fuel …

Analysis Of Tower Stringset Replacement From 33 Kv To 66 Kv Considering Sagging Clearance, Muhammad Lazuardi Azzura, Anne Zulfia Syahrial, Julius Purnama Eka Kartika

Journal of Materials Exploration and Findings

Efforts to increase the capacity of transmission networks are often undertaken by uprating the operating voltage of existing lines rather than building entirely new infrastructure. Such uprating typically involves the replacement of tower insulator stringsets to withstand higher voltages, while also ensuring that mechanical performance remains adequate. This paper presents an analysis of uprating the Parakan–Sunyaragi transmission line from 33 kV to 66 kV, with particular emphasis on conductor sagging and the resulting clearance from the ground. The methodology employed includes calculations based on catenary equations, analysis of conductor tensile forces, and a comparative evaluation of two widely used insulator …

A Basic Review Of Design And Material Selection For Shovel’S Body, Anggi Buana, Winarto Winarto

Journal of Materials Exploration and Findings

Manual shovels still play an important role in construction and agricultural work, selecting the right material is crucial to obtain a shovel body that has structural reliability, ergonomic efficiency, and sustainability. In this study, a method for selecting the most suitable material will be discussed by combining functional analysis (Ashby's material performance index, and the Multi-Criteria Decision Making approach). From the figure of load, material index is formulated as a reference for performance property requirements. Using data from analysis software and qualitative data, eight performance criteria such as durability, corrosion resistance, cost, and environmental impact are then weighted using the …

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa

Journal of Materials Exploration and Findings

A modified eye bolt from the David Arm Manhole Storage Tank underwent thorough metallurgical study due to the consequences of the bolt's malfunction during operation. Safety issues arose when the manhole door detached during operation. The mechanical testing and chemical composition analysis of the bolts indicated they were manufactured from an ASTM A193 Grade B7 material used for high-temperature bolting. This material did not conform to the engineering drawing, which mentioned SA 563A, which is about nuts, not bolts. This contradiction clearly shows that the eye bolt which was installed does not conform to the intended design. Welded connections of …

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih

Journal of Materials Exploration and Findings

Peat water is a surface water source widely used by people in swampy and lowland areas, but it has poor quality characteristics such as high organic matter content, low pH, and dissolved metal levels such as iron that exceed the threshold. These conditions can cause health problems and reduce the quality of clean water so that effective treatment technology is needed. This study aims to analyze the effectiveness of ultrafiltration membranes made from chitosan from shrimp shell waste in rejecting iron (Fe) and organic substances in peat water, and to determine the effect of pressure on separation performance. This study …