Digital Commons Network^™

Manufacturing Of A Wooden Tortilla Press: Idea To Production, Glenn H. Walker

Honors Theses

The purpose of this thesis is to document the design, development, and manufacturing of a wooden tortilla press completed as a capstone project through the Center for Manufacturing Excellence (CME). The project follows a structured product development process that began with problem definition and concept development, progressed through design, prototyping, and jig fabrication, and culminated in a full production run on the CME shop floor. A multidisciplinary team, including engineers, a marketer, and an accountant, collaborated throughout the project to support both technical development and manufacturing execution. Project planning and scheduling were established early and maintained throughout the project to …

Design And Production Of A Carbon Fiber Longboard, Vince Fichtel

Honors Theses

This thesis contains an overview of the design, prototyping, and manufacturing of a carbon fiber long board. The purpose of this capstone was to create a viable product for the real-world market and then determine how to manufacture it at scale with sustainable financial practices. In order to accomplish this task, engineering, accounting, and manufacturing challenges had to be overcome throughout all stages. The production process involved the carbon fiber layup, baking, water jet cutting, and assembly of the carbon fiber longboard. In order to optimize this process, continuous improvement and lean manufacturing problem solving techniques were applied. After a …

Design And Development Of A Manufacturing Process For A Raised Planter Box, Weslyn Mcmurrin, Larson Looney, Haneef Adebisi, Rachel Hipskind, Carolyn Hale

Honors Theses

This report presents the design and manufacturing process of a raised garden bed box with an integrated irrigation system. The goal of this project was to replicate a manufacturing environment in the creation of a durable, ergonomic, and cost-effective product. The project began in Spring 2025 with initial market and financial research to determine design requirements and materials for prototype development and continued through the end of the Fall 2025 semester with a small-scale production run and team presentation. Following our market and financial research, multiple design concepts were evaluated and refined through the use of computer-aided design and prototype …

Manufacturing Process Of A Wooden Tortilla Press: Idea To Production, Colleen Nolan, Ben Bird, Olivia Marque, Emma Palmer, Hayden Walker

Honors Theses

The purpose of this thesis is to document the design, development, and manufacturing of a wooden tortilla press completed as a capstone project through the Center for Manufacturing Excellence (CME). The project follows a structured product development process that began with problem definition and concept development, progressed through design, prototyping, and jig fabrication, and culminated in a full production run on the CME shop floor. A multidisciplinary team, including engineers, a marketer, and an accountant, collaborated throughout the project to support both technical development and manufacturing execution. Project planning and scheduling were established early and maintained throughout the project to …

The Design And Manufacturing Process Of The Concealed Shelf, Joshua Harvel

Honors Theses

The Haley Barbour Center for Manufacturing Excellence (CME) at the University of Mississippi challenges students to manufacture a product and put forth a balanced manufacturing line in a senior capstone project. The chosen product was a concealed shelf, or a shelf with a hidden compartment. The team aimed to design a product, formulate a project plan, analyze the market, conduct financial analysis, develop a prototype, establish a manufacturing process, and demonstrate that process in two production runs. The team used tools such as Computer Aided Design (CAD), market surveys, jig creation, and line balancing to accomplish these tasks. After two …

Designing A Collaborative Uav-Ugv System For Autonomous Challenge Completion, Ember Reysen

Honors Theses

The coordination between Unmanned Aerial Vehicles (UAVs) and Unmanned Ground Vehicles (UGVs) holds significant potential for completing complex tasks such as disaster response and construction surveillance by leveraging the strengths of aerial flight and stable on-ground transportation. Unfortunately, coordination between UAVs and UGVs is extremely complex and task-dependent, leading to limited understanding of autonomous collaboration. This thesis explores the process of designing an UAV-UGV collaborative system capable of aerially scouting a target destination, relaying its coordinates to a ground vehicle, and performing a precision landing for unison travel. I utilize computer vision techniques via OpenCV for target marker identification, ROS …

Optimizing Copper Slag As A Sustainable Precursor For Iron Phosphate Cement: Hydration Mechanism, Phase Transformation, And Environmental Safety, Wei Wang, Hongyan Ma, Xiunan Cai, Dan Luo, Zhicheng Xu, Zhongqiu Luo, Xintao Zhou

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Iron-rich copper slag (CS) has significant potential as a precursor for the synthesis of sustainable acid-base cement (AB). However, the roles and transformation behaviors of the diverse iron phases in CS during hydration remain unclear. In this study, the preparation conditions, early hydration behavior, transformation processes of iron components, and environmental safety of CS-based iron phosphate cement (CS-IPC) were systematically investigated. Under optimized conditions, with a CS/ADP mass ratio of 3.0 and a grinding time of 1.5 h, CS-IPC exhibited an initial setting time of 27.6 min and a flowability of approximately 159 mm. After curing for 3 and 28 …

Heat Pump Water Heater Cta-2045 Implementation Guidance For Maximizing Demand Response Impact, Dana Kahiwahiwa Paresa

Dissertations and Theses

Residential flexible loads, such as heat pump water heaters, have great potential for grid reliability services; however, their effectiveness depends on reliable performance in response to coordinated grid service requests. While the ANSI/CTA-2045-B protocol standardizes communication, it does not mandate specific functional behaviors, creating a mismatch in which the device may comply with the communication protocol but fail to meet performance expectations. This manuscript demonstrates the need for a ANSI/CTA-2045-B implementation guide by quantifying these discrepancies through gray-box conformance testing of market-available units followed by large-scale simulations.

Field testing results revealed a significant conformance gap. Tested units exhibited an average …

Spad Camera Image Analysis, Pratheen Reddy Pininti

Electronic Theses and Dissertations 2020 - Present

I present a thorough noise characterization of the Canon MS-500, a Single-Photon Avalanche Diode (SPAD) camera system, tested under both lit and dark conditions. The camera outputs 10-bit digital number (DN) values produced by an internal processing pipeline whose design is not publicly documented. All analyses in this thesis therefore describe the camera’s DN output — the signal that any downstream detection, tracking, or classification system will actually receive — rather than the photon-counting statistics of the underlying SPAD array. All computations were performed on the native 10-bit data. Where a measured quantity has a known photon-counting analog, the relationship …

Design And Production Of A Carbon Fiber Longboard, Jacob T. Williams

Honors Theses

This thesis contains an overview of the design, prototyping, and manufacturing of a carbon fiber long board. The purpose of this capstone was to create a viable product for the real-world market and then determine how to manufacture it at scale with sustainable financial practices. In order to accomplish this task, engineering, accounting, and manufacturing challenges had to be overcome throughout all stages. The production process involved the carbon fiber layup, baking, water jet cutting, and assembly of the carbon fiber longboard. In order to optimize this process, continuous improvement and lean manufacturing problem solving techniques were applied. After a …

Design Optimization Of Active-Stabilizing Canards For High-Powered Rockets, Simon Babcock

Senior Honors Theses

Rocket canards are a common means of stabilizing a high-powered rocket in flight by producing aerodynamic forces to correct the rocket's trajectory. The size, shape, and position of the canards relative to the rocket body determine their control effectiveness and aerodynamic efficiency – two objectives of canard design with an inverse relationship to each other. By integrating automated iterative rocket trajectory simulation with adaptive surrogate modelling, this research optimized the canard planform geometry for a high-powered rocket to maximize the canards’ control effectiveness and aerodynamic efficiency through multi-variable, multi-objective design optimization. The canard design was first parameterized into four design …

Modeling Individual Self-Protective Behavior During Epidemics, Geonsik Yu, Michael J. Garee, Mario Ventresca, Yuehwern Yih

Faculty Publications

Protecting public health from infectious diseases requires collective action, as individual behaviors—such as vaccination and mask-wearing—directly influence disease dynamics. During the COVID-19 pandemic, unexpected public responses often undermined the effectiveness of interventions, highlighting the need to understand collective behavioral patterns and motivations to design more effective mitigation strategies. This study presents an agent-based simulation model that captures how individuals adjust self-protective behaviors based on evolving opinions about disease risk and examines how these decisions interact with external factors, such as public health interventions, to shape collective outcomes. To improve the representativeness of the simulated population, multiple datasets were integrated to …

Teacher Shortages In Arkansas Rural School Districts: Employed Teacher’S Perceptions Of The Impact On Their Effectiveness, Carloss Guess

ATU Theses and Dissertations 2021 - Present

ABSTRACT

TEACHER SHORTAGES IN ARKANSAS RURAL SCHOOL DISTRICTS: EMPLOYED TEACHERS’ PERCEPTIONS OF THE IMPACT

ON THEIR EFFECTIVENESS

Carloss Guess

Teacher shortages in rural school districts remain a persistent challenge that affects instructional quality, teacher workload, and professional sustainability. The purpose of this qualitative phenomenological study was to explore how teachers in rural Arkansas perceive the impact of staffing shortages on their instructional roles, workload, and professional well-being. Data were collected through semi-structured interviews with 10 K–12 teachers representing elementary, middle, and high schools and across varying career stages. Interview transcripts were analyzed using an inductive qualitative approach and the constant …

The Design And Optimization Of A Styrene Production Plant, Kaylee Hardenstein, Amanda Anderson

Honors Theses

This thesis presents the design and economic optimization of a Styrene Production Plant targeting a capacity of 100,000 tonnes/yr at a product purity of 99.8 wt%. The process relies on the dehydrogenation of ethylbenzene in a packed-bed reactor system. Downstream separation is achieved through a series of cooling, phase separation, and distillation operations to recover styrene while recycling unreacted ethylbenzene and recovering valuable byproducts.

A base case design was developed and evaluated using a process simulation software, Aspen Plus V14, and an economic analysis. Sensitivity analysis identified the styrene market price and ethylbenzene raw material cost as the dominant factors …

Manufacturing Processes Of A Wooden Tortilla Press: Idea To Production, Emma J. Palmer, Glenn Walker, Colleen Nolan, Olivia Marque, Benjamin Bird

Honors Theses

This thesis follows the Manufacturing Process of a Wooden Tortilla Press from idea to production following lean manufacturing processes and producing a valuable, and profitable product.

Ballistics Characterization Of Micro-Truss Reinforced Lunar-Inspired Geopolymer Concrete For Space Construction, Phoebe G. Johnson

Honors Theses

This research investigates the ballistics response and compressive strength of a Fly Ash/ Lunar Regolith hybrid geopolymer concrete developed for space construction. The study aimed firstly to optimize the Fly Ash/ Regolith mix ratio for maximum mechanical performance and secondly, to evaluate the effectiveness of carbon-fiber micro-truss reinforcement, produced by 3D printing, in mitigating damage from high-velocity impacts. Concrete specimens with varying Fly Ash-to-Regolith ratios (100-50% Fly Ash) were fabricated and tested under compression and ballistic loading. Compressive strength tests followed ASTM C109 using a 110 Kip 810-MTS testing apparatus on both unreinforced and reinforced 2” cubes. For unreinforced samples, …

Development Of A Putting Green Manufacturing Process, Jose Andres Cepeda Santiago

Honors Theses

Our Capstone project investigates the end-to-end design, development, and production of a 6‑foot long portable putting green marketed for individuals seeking a high quality, competitively priced golf product for home or office use. The capstone project examines the full lifecycle of product creation applying manufacturing principles learned through the center of manufacturing’s coursework. From the initial concept through engineering design, market research, prototyping, manufacturing optimization, and final production the project emphasizes cross‑functional collaboration across engineering, business, and accountancy majors. Methods used to gather data included marketing surveys, CAD drawings, time studies during production runs, value stream mapping, and controlled documentation …

Development Of A Putting Green Manufacturing Process, Avalon R. Madden

Honors Theses

Our Capstone project investigates the end to end design, development, and production of a 6‑foot long portable putting green marketed for individuals seeking a high quality, competitively priced golf product for home or office use. The capstone project examines the full lifecycle of product creation applying manufacturing principles learned through the center of manufacturing’s coursework. From the initial concept through engineering design, market research, prototyping, manufacturing optimization, and final production the project emphasizes cross‑functional collaboration across engineering, business, and accountancy majors. Methods used to gather data included marketing surveys, CAD drawings, time studies during production runs, value stream mapping, and …

The Design And Manufacturing Process Of The Concealed Shelf, Emma R. Freeman

Honors Theses

The Haley Barbour Center for Manufacturing Excellence (CME) at the University of Mississippi challenges students to manufacture a product and put forth a balanced manufacturing line in a senior capstone project. The chosen product was a concealed shelf, or a shelf with a hidden compartment. The team aimed to design a product, formulate a project plan, analyze the market, conduct financial analysis, develop a prototype, establish a manufacturing process, and demonstrate that process in two production runs. The team used tools such as Computer Aided Design (CAD), market surveys, jig creation, and line balancing to accomplish these tasks. After two …

The Optimization Of A Robotic Welding Arm To Improve Efficiency, Margaret Close

Honors Theses

The main objective of this report is to optimize a robotic welding arm to improve a locker manufacturing process. The robotic welding arm, a Miller PerformArc, used by Lockers Manufacturing has been producing spatter. Spatter significantly reduces the quality of the product and increases the product’s manufacturing time. The goal of this project was to find the best solution to reduce spatter without weakening the welds and ensuring that efficiency will increase. The first step in this project was to test multiple weld testing variables such as voltage, current, welding angle, robot speed, and arc and crater ratios. For each …

Hyposense: Multimodal Physiologic And Voc Wearable For Early Hypoglycemia Detection, Nidhi R. Patel

Honors Theses

Hypoglycemia remains a significant safety concern for insulin-dependent individuals, especially when blood glucose declines rapidly during exercise, sleep, or periods of impaired hypoglycemia awareness. Current continuous glucose monitors and automated insulin delivery systems have helped to improve diabetes management, but these technologies primarily respond to glucose trends after they have already started and may not actually provide sufficient warning before symptoms occur. This thesis describes the development of HypoSense, a noninvasive wrist worn wearable concept that is designed to support earlier hypoglycemia risk detection through multimodal physiologic and volatile organic compound emission sensing. HypoSense combines volatile organic compounds/gas sensing with …

The Design And Manufacturing Process Of The Concealed Shelf, Mexrojiddinbek Sattorov

Honors Theses

This document contains information regarding the design and build process of the Concealed Shelf, which is a furniture product with hidden storage capability. First, the team members decided on the design of the product, followed by market analysis and manufacturing feasibility. Lean manufacturing principles were applied to improve the process efficiency and reduce waste.

Multiple prototypes were built with varying raw materials and locking mechanisms. Jigs and fixtures were handcrafted to ensure more consistent product quality. Two production runs were conducted to evaluate performance and identify areas for improvement.

The final design includes economic considerations, manufacturing layout, and continuous improvement …

Thermal Management Of Electric Vehicle Batteries Using Multi-Directional Immersion Cooling Techniques, Lindsey T. Mcgee

Honors Theses

Through the years, liquid cooling has been the most prominent technique used to regulate the temperature in electric vehicle (EV) batteries. This involves a circulating coolant running through a closed-loop system that passes through each of the channels within the lithium-ion battery. While effective, this design has certain limitations. Since the coolant is not making direct contact with the battery cells, its’ capabilities to cool are greatly hindered. Immersion cooling techniques have shown to be an effective cooling method for lithium-ion batteries. This method involved running a dielectric fluid flow across the body of the battery cells. With the immersion …

Optimization And Safety Protocols For An Acetone Production Plant, Holley J. Garrison

Honors Theses

The proposed acetone production plant, scheduled for start-up in 2028, is capable of producing 3,750 kg/h of 99.9 wt% acetone. Using an endothermic catalytic dehydrogenation reaction, a feed of isopropyl alcohol (IPA) is reacted to produce 30,000 metric tons per year (MT/y) of acetone. Initial design and economic analysis of this process found that this plant will not be economically viable due to its Net Present Value (NPV) of -$132M. Optimization efforts prioritized reductions in raw materials and improved product recovery. Several optimizations were performed to reduce the feed rate, including switching to the low temperature catalyst, shortening the reactor …

Plastic Material Analysis And Bonding In Small Aquatic Vessels, Andrew R. Orr

Honors College Theses

This project presents the design and development of a suitable vessel for small-scale aquatic applications. The developed project is used for a remote-controlled duck hunting system, and the parameters of the design are based on the requirements for the system as a whole. Traditionally, plastics are fabricated using blow molding to create a single seamless form. However, for small-scale prototyping with limited resources, this method of fabrication is unsustainable for short-term, non-industrial design applications. As a result, an existing longer hull is selected and shortened to meet the required project length. The project evaluates multiple initial hull designs, ultimately selecting …

Correction: Case, R.P.; Hupy, J.P. Methods For Gis-Driven Airspace Management: Integrating Unmanned Aircraft Systems (Uass), Advanced Air Mobility (Aam), And Crewed Aircraft In The Nas. Drones 2026, 10, 82, Ryan P. Case, Joseph P. Hupy

Aviation Technology Graduate Student Publications

A correction has been made to Section 2. Materials and Methods, paragraph 4.

In 2023, a Purdue University DJI M300 was conducting an RGB (Red, Green, Blue) mapping mission near the Purdue water tower on the Northwest side of campus. Just after 5:00 PM Eastern, the DJI M300 UAS operator was alerted of an aircraft entering their mapping mission airspace and took action to increase separation until the threat had passed. The DJI M300 UAS team had appropriate LAANC approval and waivers in place to conduct their mission and had a VHF radio monitoring KLAF Tower communications. The DJI M300 …

The Pebble In The Shoe, Marcos Fernandez Tous

The Cicadian

This piece offers an introspective reflection by an educator at the University of North Dakota, blending phenomenological perspectives on the nature of education with the embodied experience of participating in a sweat lodge. Framed by a meandering walk across campus, the narrative interweaves several thematic threads: the tension between clarification and explanation, the values that should guide technology education, and the role of nature with its inherent, chaotic vitality. Although the text adopts a stream‑of‑consciousness approach, it does so without leaning on the established stylistic traditions of Proust, Joyce, or Faulkner. The work is also poetic in tone, suggesting that …

Synthesis And Investigation Of Tungsten–Copper Oxide Composites For Enhanced Photocatalytic Applications, Janak Paudel, John Nichols

Research and Creative Works Expo

No abstract provided.

Behavioral And Biomechanical Analysis Of Hand Movement Stability In Virtual Reality, M. J. M. Sunny, Dr. Aryabrata Basu

Research and Creative Works Expo

This research investigates fine motor control in virtual reality (VR) using a buzz-wire style precision task. Participants guide a loop along a wire while motion telemetry captures hand stability and movement patterns. Results show that individuals with combined VR, gaming, and athletic experience demonstrate smoother trajectories and reduced jitter, highlighting how prior expertise influences performance in immersive motor tasks.

Brine Solidification And Metals Sequestration Using Lignocellulosics, Frank Kvietok

World of Coal Ash Proceedings

Coal ash has historically been used as a convenient, on-site solidification material for brines generated from flue gas desulfurization at power plants. As alternate utilization scenarios are developed for coal ash, lignocellulosic (wood-based) sorbents can serve as a highly efficient substitute for the solidification process. Results will be shared for a variety of different brine types: thermally reduced, thermally reduced and neutralized, and reverse osmosis. In addition to solidification performance, which demonstrated a 3-4x mass of liquid vs mass of sorbent factor, studies were conducted to quantify the strength of binding to the wood-based sorbent for a broad range of …