Digital Commons Network^™

Elevate Grill, Tanner Bachmann, Lance Anderson, Caden Huang, Jonathan Li, Brady Alexander

Mechanical Engineering

Santa Maria-style grills are a defining cooking tool of California’s Central Coast and are valued for their open fire cooking method and adjustable grate height. While this design provides direct control over cooking conditions, maintaining a consistent cooking temperature requires frequent manual adjustment of the grate position. This process relies heavily on operator experience and continuous attention, making temperature consistency difficult to maintain in a commercial kitchen environment. The Elevate Grill project was developed for Mike Ahrens and Wren Provisions to address this challenge while preserving the traditional Santa Maria grilling experience. The system uses temperature feedback from multiple thermocouples …

Stakblocks, Micah Satoshi Inoshita, Ava Rose Doerschlag, Cody J. Ellis, Zach M. Lawton, Fernando M. Nalin, Nicholas Humphrey, Aiden Reed Anderson, Sara Maya Suratkal

Mechanical Engineering

Researchers developing sustainable building materials from agricultural waste need a faster way to prototype and evaluate small-scale samples under controlled temperature and pressure before scaling to production. Sponsored by Professor Pete Schwartz of Cal Poly San Luis Obispo, whose work focuses on sustainable technology for developing communities, this project aims to create a prototype testing device for researchers studying agricultural-waste bricks, with the University of Malawi as a potential future testing partner. The final product is intended to inform improved future designs rather than serve as a production-ready device, ultimately supporting the development of affordable, sustainable building materials for communities …

Toro Cover For Bob Packer, Bailey Smolinski, Brandon Petty, Arturo Ramirez, Kathryn Proctor

Mechanical Engineering

Small pools, spas, and hot tubs are common in residential homes, yet small pool owners face persistent tradeoffs between critical features such as weight, ease of use, and appearance in pool covers currently available on the market. Most products optimize a single attribute at the expense of others. For example, solar covers are energy efficient but structurally weak, safety meshes are cost-saving but intensive to install, and retractable covers are automated but expensive. Beyond these tradeoffs, existing solutions often demand multiple people to install, take time and effort, occupy valuable deck space, and sacrifice the surrounding aesthetic. Therefore, small pool …

Foldable Transfer Platform, Toby Sagi, Ashton Heiati, Triton Johnson, Zachary Denis

Mechanical Engineering

The report details the design and results of a Hoyer lift to transfer patients between wheelchairs and our sponsor's, Beacon VTC Santa Maria, vans. The lift disassembles into 3 main pieces, allowing the lift to be stored in the back of the van. The lift uses a hydraulic actuator to rotate the boom. We handed over our project to Beacon VTC Santa Maria for use in their facility!

Package Access Platform, Tyler Connor Moyers, Austin Sien, Brooke Almaraz, Aiden Montano

Mechanical Engineering

This Final Design Review (FDR) presents the completed package access platform project following fabrication, assembly, and verification testing of the final prototype. The project focused on the development of an adjustable and modular access platform capable of adapting to varying workspace requirements while maintaining operator safety and structural stability. The finalized design incorporates adjustable platform dimensions, modular frame expansion, integrated OSHA-compliant handrailing, and adjustable support legs to accommodate uneven surfaces and changing operational needs.

Water Turbine Dynamometer For Low-Power Turbomachinery Testing, Carmen Alaichamy, Yosef Huynh Torres, Michael Duperly, Michael Thomas Duff

Mechanical Engineering

Students in ME 443: Introduction to Turbomachinery compete to design and build efficient small impulse turbines. The course lacks a standardized method to experimentally calculate turbine power output and mechanical efficiency from accurate measurements of torque and speed, for example. To support the learning goals of ME 443, a dedicated water-turbine dynamometer is needed to provide controlled hydraulic power, accurate mechanical and electrical measurements, and clear data for performance evaluation.

Our proposed system delivers a safe, repeatable, and educational testing environment that can be integrated into the Fluids Lab or used as a standalone instructional tool. Key stakeholders include Professor …

Me443 Turbine Timing System, Jacky Liang, Michael Ayman Habib, Julio Cesar Gutierrez Jr., Eric Tran

Mechanical Engineering

No abstract provided.

Composite Carrier, Thomas W. Clarke, Kaden T. Guevarra, D'Anna M. Jennings, John F. Tomas

Mechanical Engineering

The Composite Carrier project developed and tested a proof-of-concept system to improve safety and accessibility in the Cal Poly Composites Lab. The system enables users to retrieve composite material rolls from elevated storage racks without using ladders, reducing fall hazards and improving material handling. The final design integrates rack-mounted rotary latches, a ground-level pulley release mechanism, and a custom Genie dolly attachment with a foldable cradle. Verification testing demonstrated that the prototype could securely retain representative roll loads, support repeated retrieval and placement, and improve operator safety, while also identifying future refinements such as reducing attachment width for improved rack …

Golf Ball Marking Machine, Isabella Brinkman, Erin Maxwell, Benjamin Nash, Matthew Nicacio

Mechanical Engineering

The Golf Ball Marking Machine was designed, manufactured, and tested to provide a compact and cost-effective solution for applying durable identification markings to golf balls. The system integrates a gravity-fed hopper, singulation mechanism, motorized marking chamber, and automated discharge system to process golf balls with minimal operator intervention. A computer control system coordinates the marking cycle, enabling consistent application of a circumferential stripe. Verification testing demonstrated compliance with requirements for size, weight, power consumption, safety, and marking durability while maintaining a tabletop size footprint. The prototype achieved an average throughput of 5.43 balls per minute and successfully validated the feasibility …

Collagen Gene Expression Is Linked To Aging And Lifespan Extension In C. Elegans, Archer J. Wang, Blake M. Geppert, Daniel Beck, Yanqing Ji, Yiyong Liu

Electrical & Computer Engineering Faculty Scholarship

Collagens, long regarded as structural molecules, also regulate stress responses and longevity. In this study, we analyzed our RNA sequencing data and publicly available gene expression data to define their role in Caenorhabditis elegans aging. Collagen expression broadly declined with age, with 16 collagen genes consistently downregulated across independent studies, establishing collagen downregulation as a genetic hallmark of aging. In contrast, meta-analysis of 66 datasets (128 comparisons between normal and long-lived animals) showed collagen upregulation in 84% of long-lived conditions, identifying collagen induction as a conserved signature of lifespan extension. Using π-values to integrate fold change and significance of …

Western Kentucky University Stormwater Utility Survey 2026, Warren Campbell

SEAS Faculty Publications

In the U.S., more than 2200 stormwater utilities have been enacted. This year, we have expanded the survey to include stormwater utilities in other countries. Many of these stormwater assessments are called taxes, but if the assessment is recurring, is not an ad valorem tax, and is dedicated to stormwater purposes, we call it a stormwater utility. With the help of ChatGPT we have been able to identify 25 stormwater fees in Australia. We were also able to identify 3 in New Zealand, and some in Europe as well.

Evaluation Of Alternative Solvents For Electrospinning Occluded Scaffolds To Model Intracranial Atherosclerotic Disease In Blood Vessel Mimics, Olivia D. Rankin

Master's Theses

Intracranial atherosclerotic disease (ICAD) is characterized by a buildup of fatty plaque within the walls of arteries supplying the brain, resulting in vessel narrowing, restricted blood flow, and increased risk of ischemic stroke. While various treatments exist for ICAD, most are accompanied by high recurrent stroke rates and other adverse events, highlighting the need for further investigation and models for pre-clinical testing. Tissue engineered Blood Vessel Mimics (BVMs), consisting of a polymer scaffold sodded with human vascular cells, serve as physiologically relevant in vitro models for vascular device testing. This thesis focused on the application of alternative solvents to a …

Matlab Shake Table Control And Data Acquisition System, Abigail Austin

Architectural Engineering

The College of Architecture and Environmental Design’s (CAED) seismic laboratory shake table is used for earthquake engineering education and experimental testing. However, the existing control system is outdated and difficult for students unfamiliar with the system to operate. The objective of this project was to develop a MATLAB-based control and data acquisition application to simplify shake table operation and improve accessibility, of both operation and output, for student users.

The developed application imports earthquake acceleration records, scales the input motions to the operational limits of the shake table, and executes the desires motion through the existing hardware system. Experimental data …

Electrically Evoked Emg Decomposition Using The Perturbative Generalized Series Expansion, William R. Walker

Master's Theses

Electrically evoked electromyography records the muscle's response to nerve stimulation and has been used for clinical assessment of neuromuscular function, as well as treatments such as functional electrical stimulation or stroke rehabilitation. In every muscular contraction, an electrical signal is generated. These signals come from the summation of simultaneously recruited motor units, enabling decomposition techniques to reveal information about motor unit recruitment.  By improving the ability to decompose and analyze these signals, clinical treatments involving neuromuscular electrical stimulation can be optimized and better understood. Much of the research on EMG analysis focuses on voluntary EMG, leaving a gap in the …

Develop & Test Radar Assignments For Future Graduate Curriculum, Thomas Ky Hong, Christopher William Hoferer

Electrical Engineering

With Cal Poly’s switch to semesters, many upper-level electives lack enough depth and structured content for the new 15-week format. In addition, while the Electrical Engineering department currently offers approximately five weeks of RADAR-focused laboratory material within EE 424: Intro to Remote Sensing, this limited exposure is insufficient to provide students with a comprehensive understanding of RADAR theory and practical applications. The semester conversion presents a timely opportunity to expand this existing five-week RADAR segment into a full 15-week course that integrates both lecture and laboratory content. To address the current curriculum gap, we have seamlessly extended the RADAR exercises …

Vision-Guided Motion Planning For Autonomous Catch With A Robotic Arm, Kayla Go-Oco, Ashik K. Islam, Raegan Gritzmacher

Electrical Engineering

Modern robotic systems are often evaluated using static and highly controlled tasks, such as pick-and-place demonstrations, which do not fully represent the uncertainty and adaptability required in real-world environments. A major challenge in robotics research is enabling robotic systems to perceive, track, and respond to dynamic objects in real time while maintaining accurate and reliable motion control. This project addresses these challenges by developing an autonomous robotic platform in which an OpenMANIPULATOR-Y robotic arm detects, tracks, and attempts to catch a moving tennis ball using a vision-guided control system. The system integrates YOLO-based object detection with an Intel RealSense D455 …

Shared Language For Responsible Ai Integration, Asa B. Stone, Mark C. Stone, Alisha Bevins, Jean Claude Niyomugabo, Irene Magara, Jacob Abaare, Derek M. Heeren, Mubarak Abu Zouriq

PRAIRIE: Pioneering Responsible AI for Research, Innovation, and Education

As AI rapidly reshapes how we work and learn, employers increasingly seek graduates who can think before they prompt, exercising judgment under pressure rather than merely producing output. Yet students are praised for AI use in one course and penalized for it in the next, and faculty are left to lead responsibly on shifting ground, with no shared language to guide them.

This paper introduces the PRAIRIE Framework for AI Integration, a shift from reactive gatekeeping toward proactive stewardship. It emerged from a qualitative sentiment analysis of three communities (students, faculty, and industry partners) whose concerns converged on one need: …

Teaching Learning Newsletter Vol 6 Issue 1, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

Repurposing Electrical Waste Materials For Developing Corrosion-Resistant Medium Entropy Alloys, Iman El-Mahallawi, Shaza Raji Eng, Shimaa El-Hadad Prof., Mahmoud Tash Prof., Lamiaa Zaki Dr.

Mechanical Engineering

Reusing electrical waste as a sustainable metal source is a promising approach for producing next-generation alloys. In this work, vacuum arc melting (VAM) was used to produce three aluminum-based medium-entropy alloys (AlCuFeCrSi MEAs) from recycled electrical waste. The alloys contained Al in the range 36-46%; Cu in the range 28-35%; Fe in the range 11-18%; Cr in the range 5-6%; and Si in the range 3-6%, with variations in elemental composition resulting from the use of different recovered electrical waste components. Their corrosion performance was evaluated at room temperature, in a 3.5% NaCl solution with and without 1 g/L Mn …

Validation Of Electromagnetic Shower Development In A Reduced Alice Focal-E Detector Model Using Geant4, Isaac Lara Romo

Physics

This project focuses on the preliminary simulation of a reduced FoCal-E detector model for the ALICE experiment at CERN. Beamline tests were simulated using an electron gun at various incident energies, and the results were compared with those of the FoCal group. The longitudinal charge deposition per sensor layer was compared between the two setups to verify that the reduced model exhibited expected calorimeter behavior. Additionally, the transverse signal across the high-granularity sensor layers was examined to determine whether the reduced model reproduced the expected lateral development of electromagnetic showers. The results obtained from these measurements show that the reduced …

Hydpn: A Hybrid Deep Reinforcement Learning, Programming, And Neighborhood Operations Framework For Integrated Scheduling On Parallel Batch Processing Machines, Yuqi Wang, He Luo, Guoqiang Wang, Zhaoxia Wang

Research Collection School Of Computing and Information Systems

Batch processing machines (BPMs) are widely used in industries such as semiconductors, metal processing, and healthcare, where jobs are processed in batches. As production, inventory, and distribution become increasingly integrated to improve efficiency, research on their joint scheduling in parallel BPM environments remains scarce. This paper addresses the integrated scheduling problem in parallel BPMs, involving production, inventory, and distribution stages, with the objective of minimizing total costs. A unified cost-based model is first formulated, applicable to both in-facility and external distribution scenarios. A hybrid algorithm framework, HyDPN, combining deep reinforcement learning, dynamic programming, and neighborhood operations is proposed. Extensive experiments …

Stock Market Analysis And Volatility Behavior During The Covid-19 Pandemic, Manoj Venkatachalaiah, Soon Leong Yeap, Salman Ahmed Lnu, Sangwhan Cha

Harrisburg University Other Works

This report outlines the structural design, cloud implementation, and analytical findings of a scalable Big Data architecture deployed on Google Cloud Platform (GCP). The primary objective is to investigate the macroeconomic and microeconomic disruption caused by the COVID-19 pandemic on global equities, focusing on two dominant digital business models: online retail/cloud computing (Amazon, Inc. - AMZN) and subscription-based digital streaming entertainment (Netflix, Inc. - NFLX). Through a serverless orchestration pipeline leveraging GCP Cloud Run, automated workflows fetched and blended high-velocity epidemiological metrics alongside daily financial asset layers. Data transformations and parallel analytical calculations were executed utilizing Apache Beam pipelines inside …

Public Preferences For Critical Mineral Mining In The U.S.: Evidence From A Discrete Choice Experiment, Bamidele Ajiga, Kwame Awuah-Offei, Mahelet G. Fikru

Mining Engineering Faculty Research & Creative Works

Even though there is widespread recognition that we need to mine more critical minerals for national security and energy needs, concerns about environmental impacts often lead to public opposition to proposed new mining projects. The literature lacks sufficient data from communities with proposed mineral projects to assess drivers of differences in support. This study investigates public preferences for mining projects in three states in the United States with proposed critical minerals projects, using a discrete choice experiment. Respondents evaluated projects that vary in job creation, state tax revenue, tailings reprocessing content, groundwater impacts, and surface water impacts. We also randomly …

Review Of Recovery Processes Of Palladium, Platinum, Gold, And Silver From Metallurgical Wastes, Luis Sanchez-Calderon, Marthias Silwamba, Lana Alagha

Mining Engineering Faculty Research & Creative Works

Gold (Au), silver (Ag), platinum (Pt), and palladium (Pd) are precious metals with high economic value and critical industrial significance. Platinum and Pd, in particular, are classified as critical metals by major economies such as the United States, European Union, Japan, and South Korea due to their limited supply and essential roles in clean energy and high-technology applications. The rising market value and criticality of these metals have generated interest in their recovery, not just from primary ores and traditional source materials but also from secondary sources, such as metallurgical wastes. This review provides a thorough evaluation of current and …

Mechanism-Based Assessment Of Respirable Dust Exposure In Miners: Integrating Cfd-Dpm Simulation With Personalized Monitoring For Occupational Health Risk, Jiajun An, Fan Geng, Yuqing Feng, Changgeng Gui, Shihang Li, Xinjian He, Guang Xu, Zheng Zhang, Yibao Wang

Mining Engineering Faculty Research & Creative Works

Respirable dust in confined mine environments represents a significant environmental and occupational health challenge, requiring advanced monitoring and risk assessment methodologies. Current area-level monitoring overlooks the heterogeneity of personal exposure fields and the critical influence of human-ventilation interactions on local contaminant dispersion. This study develops an integrated monitoring-simulation method to quantify multi-worker dust exposure, assessing how worker position and orientation modulate risk under forced ventilation in narrow roadways. Occupational-specific dust sampling provided validation data for a three-dimensional Computational Fluid Dynamics-Discrete Phase Model (CFD-DPM) incorporating human-ventilation interactions. The model integrates a MATLAB-developed breathing function to dynamically couple respiratory cycles with particle …

Exploiting Underground Mine Topology For Resilient Concurrent Lora Mesh Emergency Communications: Architecture, Protocol Design, And Performance Analysis, Hilary Kelechi Anabi, Samuel Frimpong, Muhammad Azeem Raza

Mining Engineering Faculty Research & Creative Works

Underground mine emergencies compromise fixed communication infrastructure exactly when situational awareness is most critical for effective rescue operations. Existing LoRa mesh protocols fail in underground mines because they ignore the structured topology of tunnel networks, specifically the waveguide effect along straight galleries, severe signal discontinuity at junctions, and the dead-end geometry of working faces. This paper presents the Topology-Aware Concurrent LoRa (TACL) mesh protocol, in which each node autonomously infers its structural role from local RF observations and packet header information, without GPS, pre-loaded mine maps, or central coordination. Role classification resolves the contender estimation problem (Formula presented.) left open …

Effect Of Allocation And Allocation Avoidance Methods On Life-Cycle Impact Results For Tellurium Production From Copper Anode Slimes, Ioanna Paschalidou, Kwame Awuah-Offei, Michael Moats

Mining Engineering Faculty Research & Creative Works

The global transition toward green energy has increased demand for metals and intensified the need for sustainable supply sources. Tellurium (Te), an essential metal for photovoltaics technology, is produced primarily as a by-product of copper refinery slimes treatment. This study conducts a life-cycle assessment (LCA) study of Te production to investigate the effect of environmental impact allocation choices on LCA results in multi-product metal systems. A cradle-to-gate LCA model of the Te product system was developed in SimaPro v9.5.0.1 software by combining industrial data, Ecoinvent v3.7.1 datasets, and literature information. Environmental impacts were quantified using the ReCiPe v1.04 Midpoint method …

Low-Cost Path-Loss Characterization For Underground Mine Tunnels Using Lora Transceivers At 915 Mhz, Hilary Kelechi Anabi, Samuel Frimpong, Muhammad Azeem Raza

Mining Engineering Faculty Research & Creative Works

Accurate path-loss models are essential for planning reliable wireless networks in underground mines, yet existing characterization studies rely on specialized channel sounders and vector network analyzers costing tens of thousands of dollars, placing them beyond the reach of most mine operators. This paper demonstrates that LoRa transceivers costing approximately US $15 per node can serve as a self-contained path-loss measurement instrument, logging the received signal strength indicator (RSSI) and signal-to-noise ratio (SNR) directly to a CSV file over a standard USB serial connection. A measurement campaign conducted at the Missouri S&T Experimental Mine on 31 March 2026 collected 4801 packets …

2–4 Ghz Reconfigurable Rf Filters, Jason Corn, Roman Junes

Electrical and Computer Engineering Senior Theses

Wireless communication systems employ radio frequency (RF) filters to isolate desired signals while suppressing interference and noise. Conventional RF filters rely on fixed-frequency architectures that restrict system operation in increasingly dynamic communication environments. This project features the design and optimization of a reconfigurable RF filter prototype using coupled microstrip resonators and electronic tuning components. The filter design demonstrates a tunable range of 2−4 GHz. Future design of reconfigurable microstrip architectures must take steps to maintain signal integrity across active elements. Power loss may be mitigated through the selection of higher quality factor components and less lossy prototyping materials.

Thermodynamic Modeling Of Ph Impacts On Subsurface Microbial Consortia, Jackfin K C

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Underground hydrogen storage is affected by microbial consumption, and the different minerals present in the subsurface. However, most studies consider either biotic or abiotic factors in isolation and hence, the conditions that drive a self-sustaining storage remain poorly understood. This thesis uses a genome-informed thermodynamic model developed by Kharel et al. (2026) in which pH is the central variable coupling hydrogenotrophic microbial metabolism, inter-species competition, and carbonate mineral buffering. The model includes four hydrogen-consuming species: methanogen (Methanobacterium), acetogen (Acetoanaerobium), aerobic acetate oxidizer (Pseudomonas stutzeri), and sulfate reducer (Nitratidesulfovibrio) by conditioning each organism's …