Digital Commons Network^™

Test 292: Huber Model B, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 293: Massey-Harris Twin Power Challenger, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

The Effect Of Ph Value And Pressure Cooking On The Mashing Of Corn., Chester E. Brown

Electronic Theses and Dissertations

No abstract provided.

Highway Bridges, Design And Cost, John Edward Kirkham

Professional Degree Theses

"Specifications for highway bridges have been modified considerably during the past 15 years. The principal modifications have been the result of the continuous development of motor traffic. The principal changes made have been with reference to live load, impact, and allowable unit stresses. The live load has been changed to conform with the increased weight of modern motor traffic; impact has been included to provide for the effect of heavy fast-moving trucks; and the change in unit stresses has resulted by agreement of engineers. The following specifications, which will be used herein, are practically excerpts from "Specifications for Highway Bridges," …

Line And Grade Control Of The Subaqueous Midtown Hudson Tunnel, Lauren Preston Tuttle

Professional Degree Theses

"The entire system unifies all Preliminary Survey, Construction Control, and Independent Traverse work; bringing them under one common balanced system; thus, their precise relation is definitely established regardless of which side of the Hudson River the unit occurs. The establishing of a complete system is a subject within itself, and as this paper deals with the method of obtaining and carrying to completion the method of control for the river section of the tunnel, we shall limit our reference to the Triangulation system to the River Quadrangle"--Triangulation System. General, page 1.

The Express Highway Through The City Of St. Louis, Fulton Hord Campbell

Professional Degree Theses

"Among the many important highway construction projects undertaken in Missouri, the Express Highway through the City of St. Louis ranks among the first both because of the coast and difficulties involved, and because of the improvement in traffic conditions which it provided. This highway enters the city at the southwest corner of Forest Park, which is the junction of Skinker Road and Oakland Avenue. The accompanying map will give an idea of the location of the highway from this point to its end, a distance of approximately two and ninety-six one hundredths miles. The most noteworthy feature is that there …

Manufacture And Application Of Rubber Belting, Lynn Harbison

Professional Degree Theses

"Rubber belting is one of the major products manufactured by the rubber companies and a wide variety of applications is found among many industries. These applications require belts which will meet the needs of the purchasing party both from a cost and a maintenance viewpoint. Belts are installed and operated for two basic purposes, namely, transmission of power and conveyance of level...Transmission and conveyor belting are fundamentally the same for one important factor; this factor is power transmission. Other data are necessary to make and select a belt of the proper type, construction and size. The subject of rubber being …

Design And Construction Of Ponds And Small Reservoirs, Harry Franklin Bossert

Professional Degree Theses

"In presenting this paper, "The Construction of Ponds and Small Reservoirs", the writer wishes to call attention to a report by the National Resources Committee entitled "Little Waters : A Study of Headwater Streams and Other Little Waters: Their Use and Relation to the Land"--Introduction, page 5.

Development And Operation Of The Universal Coal Mine, Clinton, Indiana, Horace Herbert Clark

Professional Degree Theses

No abstract provided.

The Development Of A New Process For The Manufacture Of Insulating Refractories, Miles E. Tyrrell

Bachelors Theses

"In as much as the grinding of insulating brick to size after the firing operation is one of the most important and at the same time one of the most expensive operations involved in their manufacture, it was felt that the development of a method for manufacture of insulating brick which would do away with the necessity of grinding after firing would be a very worth while project. With this object in mind it was decided that the logical method would be to incorporate the pore structure in the mix while green and at the same time to add some …

A Comparison Of Silicates Of Sodium And Potassium As The Bonding Agent In Cold-Set Refractory Cements, Kenneth Frederick Sheckler

Bachelors Theses

"The insistent demand for higher grade refractories has resulted in the manufacture of a product which will withstand higher temperatures, have greater slag resistance, greater resistance to spalling action and deformation under load. These better grades of refractory materials have been developed as the result of extensive research on the part of the manufacturers. In order that these higher quality refractories may be employed with the best results, it is necessary that they be set with a refractory cement which also possesses these desirable properties. The commercial refractory cements may be divided into two classes according to their method of …

The Development Of Spinels In Two Component Coloring Oxide Systems And Their Applications As Underglaze And Overglaze Colors, Michael Edward Green

Bachelors Theses

"For many years the fact has been known that when two or more of the coloring oxides are intimately mixed together and fired, there is a reaction between the components of the mixture. Little is known of these reactions - whether they are chemical, physical or mineralogical changes in the nature of the substances. The purpose of this investigation has been to ascertain the true nature of these reactions and the effect of the changes in the two components making up the system, upon their uses as underglaze and overglaze colors as applied in the ceramic industry"--Introduction, page 1.

Cooling Of A Hydrocarbon Oil., Edward Groth

Electronic Theses and Dissertations

No abstract provided.

A Study Of Selected Types Of Domestic Gas Stoves, Arnold E. Baragar

Nebraska Agricultural Experiment Station: Historical Research Bulletins

During recent years several detailed investigations have been made concerning the proper design of domestic gas burners but there seems to be a need for information as to the performance of the burner when used in the modern gas range. Fortunately gas equipment must pass a set of exacting tests performed in the American Gas Association Testing Laboratory before being placed on the market as approved equipment, but as is emphasized in the preface of the A. G. A. "Approval Requirements for Gas Ranges" these are a set of minimum requirements. To the general public the great need is a …

A Study And Application Of The Process Of Supergene Enrichment Of Silver Ores., Arthur C. Verling

Bachelors Theses and Reports, 1928 - 1970

In many deposits of silver ores the grade of the ore de­creases considerably a few hundred feet below the surface. It is believed that in many cases the better ores owe their richness in part to the process of sulphide enrichment. It is recognized, however, that many rich silver ores are hypogene deposits that have been affected very little, if any, by processes of enrichment.

The Extraction Of Manganese From Manganese Flue Dust., John Raymond Moore

Bachelors Theses and Reports, 1928 - 1970

It is estimated that 90 to 95% of the world’s consumption of manganese is used in the steel industry in the form of either ferromanganese or spiegeleisen. The remainder is used in the form of either salts or oxides, chloride, dioxide and monoxide.

A Study Of The Effect Of Oxygen On The Rate Of Dissolution Of Gold In Cyanide Solutions., John A. Cook

Bachelors Theses and Reports, 1928 - 1970

The accepted chemical reactions in the dissolution of gold by cyanide solutions require the presence of gold, cyanide, water, and oxygen. The importance of dissolved oxygen in cyanide solutions as a factor is recognized by those familiar with cyanidation. Manufacturers of cyanidation equipment realize the necessity of oxygen, as shown by the appliances they have developed which are attached to the agitators in order to saturate the cyanide solutions with air.

The Control Of The Grain Size Of Zinc, Oswald J. Wick

Bachelors Theses and Reports, 1928 - 1970

The use of zinc as a structural metal has been militated against by two of its properties, namely, its low tensile strength and its susceptibility to grain growth. The importance of these factors can be appreciated when it is realized that the tensile strength of coarsely crystalline cast zinc is 4,000 pounds per square inch, while finely crystalline cast zinc has a tensile strength of 12,000 pounds per square inch.

Contact Metamorphism In The Highlands, Frank Trask Jr.

Bachelors Theses and Reports, 1928 - 1970

On the southern margin of the Boulder Batholith, about twenty miles south of Butte in the Highland Mountains, there are many miles of contact between the igneous and sedi­mentary rocks. As two kinds of igneous rocks and many diff­erent kinds of sedimentary rock are present, it is an excell­ent place for the study of contact metamorphism.

A Preliminary Study Of Montana Copper - Nickel Ore, J. Argall Mcallister

Bachelors Theses and Reports, 1928 - 1970

Deposits of sulfides_, containing nickel and copper with associated platineferous minerals occur in the Stillwater Igneous Complex. This is a group of unusual igneous rocks situated in Stillwater and Sweetgrass counties in Montana.

Geology And Ore Deposits Of The Golden Era And Goldfinch Mines, Argenta Mining District, Montana., Glenn C. Johnston

Bachelors Theses and Reports, 1928 - 1970

This report includes the results of geological investigation of a small area in the northern part of the Argenta mining district. Approximately two square miles were mapped. The underground working of the three mines only were accessible: the Goldfinch. Golden Era, and Mayday mines.

The Effects Of Lime On The Amalgamation Of Gold., Rollien R. Wells

Bachelors Theses and Reports, 1928 - 1970

An amalgam is an alloy of mercury with other metals, and amalgamation is the art of making or forming amalgams. In metallurgical language the word is limited to the means adopted for the recovery of gold and silver from their ores by the use of mercury.

Geology Of Some Gold Deposits Of Montana, Leo Edwin Efraimson

Bachelors Theses and Reports, 1928 - 1970

Gold is one of the rarer metals in nature, and chemically it is one of the most inactive. Gold forms stable, natural compounds with few other elements, and only with metals.

Roofing Granules, Morris Harold Grober

Bachelors Theses

"An abundant amount of chats and clays of various kinds is available in Missouri. In the mining districts of south-eastern and south-western Missouri enormous piles of gang known as chats have accumulated. The mining companies desire to rid themselves of this accumulation and would dispose of the chats at a very low price. In northern Missouri and in the diaspore district of central Missouri suitable clays could be found which may be had for a small royalty, mining and transportation costs. Some of the requirements for roofing granules are that they have (1) a size limited by 10 and 30 …

The Use Of Fluorspar As A Flux Ingredient In Ceramic Bodies, Edward Henry Frauenfelder

Bachelors Theses

"The term "flux" is a relative one and does not refer to any particular class of substances. A flux is any material which will lower the softening, fusion, or liquifying sic temperature of another Bases act as fluxes to siliceous substances while in basic compositions like Portland cement, silica is a flux. Feldspar is a flux for white ware mixtures, and is regarded as a refractory in the low temperature enamels. Although fluorspar is used in considerable quantities in many divisions of the ceramic industry, namely: the glassware division, the enamels division, and in the manufacture of cement, its use …

Red Glazes, Robert M. Springer

Bachelors Theses

"The object of this study was to produce a commercial red glaze at cone 3 from a base glaze of colemanite and steatite"--Scope of Investigation, page 3.

A Metallographic Study Of Primitive Copper Work., John A. Alley

Bachelors Theses and Reports, 1928 - 1970

The field of archaeology and that of metallurgy appear to be widely separated and in no way related. Work done in recent years, however, tends to show that, in many ways, the metallurgist can supplement and enhance the information gain­ed by the archaeologist, at least in regard to those objects which have been made of metal.

Heat Transfer Coefficients., R. Y. Browne

Electronic Theses and Dissertations

No abstract provided.

Vapor-Liquid Equilibrium Data And Other Physical Properties Of The Ternary System Ethanol, Glycerine, And Water, Charles H. Watkins 1913-2004

Electronic Theses and Dissertations

No abstract provided.

Test 271: Caterpiller Model 30 (Distillate), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …