Digital Commons Network^™

Some Properties Of Chrome-Magnesite Mixtures And Calcium Aluminate Cement-Magnesite Mixtures, Edward Charles Duderstadt

Masters Theses

"The knowledge of the physical and chemical properties of refractories is of great importance in determining their usefulness and application. The thermal expansion of refractories is of particular importance in that it affects the thermal stability of the product. A high coefficient of thermal expansion leads to greater spalling and destruction of the bricks in use. It is, therefore, desirable to develop compositions having low coefficients of thermal expansion. This investigation was undertaken (1) to determine some of the properties of chromite-magnesite refractory mixtures in an attempt to determine the optimum composition of these mixtures, the specific properties including thermal …

The Effects Of Ultrasonically-Induced Cavitation Upon Dissolved Oxygen, Free Carbon Dioxide, And Bicarbonate Ion Concentration In Water, Charles Alvin Wentz Jr.

Masters Theses

"Cavitation may be encountered in many scientific fields. Mechanical and civil engineers are concerned with the prevention of cavitation erosion in the design of turbines, propellers, underwater missiles, and similar structures. Biologists and physiologists are seeking more knowledge concerning the tensile strength of liquids, such as, tree sap and the formation of gas bubbles in the blood stream. Finally, the physicist and acoustical engineer must cope with the cavitation problem when working with underwater transducers, cavitation noise, and the propagation of acoustical signals through media in which cavitation is occurring.

There are many forces which hold a liquid together and …

Frequency Response Of Rotating Servo Components, Yehuda Rachovitsky

Masters Theses

"The frequency response approach to the design of automatic controls is the dominant one today. This approach in a strict sense may be said to have started with a paper in 1932 by Dr. H. Nyquist, a physicist at the Bell Telephone Laboratories. In this paper Dr. Nyquist was concerned with the stability of feedback amplifiers. This work can be said to have made possible the transcontinental telephone as well as modern radio and television. Dr. Hendrick Bode, mathematician at the Bell Laboratory, extended the results of Dr. Nyquist and obtained some simple design criteria that enabled even technicians without …

An Investigation Of High-Strength, Deformed Steel Bars For Concrete Reinforcement Part Ii, Sidney A. Guralnick, George Winter

CCFSS Library (1939 - present)

INTRODUCTION The previous phase of this investigation of high-strength steel for concrete reinforcement is described in Report No. TSR-4730-7l46, which was released in July, 1957. This previous testing program was designed to provide information on the following topics, among others: (a) The shear (primarily) and flexural (secondarily) strength of restrained Tee-beams reinforced with steel of approximately 80 ksi yield point for main reinforcement and with standard steel for web reinforcement. (b) The formation of diagonal tension cracks and flexural cracks and the width of flexure and shear cracks at various loads and particularly at "design loads" (say, half the ultimate …

Educational Challenge, Frederick I. Ordway Iii

Space Journal

No abstract provided.

Space Journal, Vol. 1, No. 4, Fall 1958, Rocket City Astronomical Association, Space Enterprises, Inc.

Space Journal

No abstract provided.

Engineer Intelligence Guide 15, Collection Of Information On Coasts And Beaches, 1958, Robert Bolin , Depositor

United States Department of Defense Military Intelligence

In 1958, geographic intelligence in the US Armed Forces was decentralized. US Army Corps of Engineers was primarily responsible for creation of military intelligence concerning the surface of the earth excluding the oceans and seas for the armed forces of the United States. The Beach Erosion Board, originally an agency performing civil functions, had been preparing coast and beach intelligence since early in World War II. Engineer intelligence guides were issued to provide guidance concerning collection, processing, production, and dissemination of geographic intelligence to elements of the Corps of Engineers.

This Engineer Intelligence Guide contains a definition of Coast and …

Correlation Of Maximum Air Velocity With Liquid Entrainment Loading For Wire Mesh Mist Eliminators, Edward W. Poppele

Theses

Two styles of Initted 'wire mesh entrainment separators,or demisters were investigated to determine maximun useful air flow rates over a wide range of liquid entrainmant loadings. The demisters studiod were six-inch thickniess and constructed of 0.011 inch diameter stainless steel wire.

The expression widely used to determine allowable design velocity for gas through demisters is:

V=K/((d1, dv)/ dv) (1)

where
V = Maximum Degree gas velocity, feet per second,
K = is a constant for the system,
d= density of entrained liquid phase, pounds per cubic foot,
dv = density of gaseous phase, pounds per cubic foot.

In this work …

Policy And Procedure For Federal Reimbursement For Cost Of Right Of Way, C. W. Phillips

Kentucky's Annual Forum on Transportation

No abstract provided.

Highway And Traffic Developments In Great Britain, T. E. H. Williams

Kentucky's Annual Forum on Transportation

No abstract provided.

Transients And Saturation In Synchronous Machines, Sabi J. Asseo

Masters Theses

"The synchronous machine can be regarded as the most important electrical device in today's industry and civilization. Although many improvements in the development of powerful electronic devices have been made, in recent years, the importance of the electrical power engineering field can never be overlooked in any way.

Most of electrical power engineering problems have been studied in the first quarter of the present century, and the results applied to industry for the betterment of electrical power production. As distribution and transmission systems used become extensively large, new problems such as the stability of interconnected power systems, have been introduced. …

Semi-Conducting Properties Of Gray Tin As A Laboratory Introduction To Solid State Physics, Glenn F. Powers, Gene E. Louallen, Robert M. Rickett

Journal of the Arkansas Academy of Science

No abstract provided.

Synthetic Fiber Industry- A Story In Industrial Location, Leonard D. Goranson

Journal of the Arkansas Academy of Science

No abstract provided.

Spilitic Rocks And Mineral Deposits, G. C. Amstutz

Missouri School of Mines and Metallurgy Bulletins

The principal results of research work on spilitic rocks and mineral deposits carried on since 1945 are briefly summarized. Emphasis is placed on the influence of the results on the theories of rock and ore genesis, particularly the change of "philosophy of exploration" based on the existence of hydro magmatic ore deposition. A re-classification of magmatic mineral deposits is offered.

Methods To Improve The Metallurgy Of Bolivian Tin Ores, Oscar Davila-Michel

Masters Theses

"Tin is a rare element; among the base metals it is one of the rarest. Although it was one of the first metals used by man and has been used since prehistoric time, the ore-dressing and metallurgical methods of tin are inefficient and very wasteful.

The only tin deposits of importance in the Americas are located in Bolivia, South America, and it is in Bolivia that the problems of tin metallurgy are greatest. More than 50% of the tin that is mined in Bolivia is lost in the tailing dumps of the beneficiation plants. In a country where the export …

Quality Aggregates For Indiana Highways : Technical Paper, Kenneth B. Woods, John Francis Mclaughlin, Robert Lee Schuster

JTRP Technical Reports

No abstract provided.

A Laboratory Investigation Of Factors Affecting The Slipperiness Of Bituminous Paving Mixtures, John Wallace Shupe

JTRP Technical Reports

No abstract provided.

Polishing Characteristics Of Mineral Aggregates : Technical Paper, John Wallace Shupe, R. W. Lounsbury

JTRP Technical Reports

No abstract provided.

Estimation Of Highway Needs For County Primary Road Systems In Michigan And Minnesota By Sample Survey Methods, Donald O. Covault

JTRP Technical Reports

No abstract provided.

Design Of Distillation Solvent Recovery System, Donald Empson Puyear

Masters Theses

"With the advent or the atomic bomb during the summer of 1945 the opportunity for engineering colleges to provide an integrated course of study in the field of nuclear engineering was presented. This opportunity has been greatly enhanced by a policy of the Atomic Energy commission, granting funds to selected institutions for equipment necessary for successful instruction in this field. The Missouri School of Mines and Metallurgy, realizing the opportunity presented, has established a course of study in nuclear engineering in which the departments of Ceramic, Chemical, Mechanical and Metallurgical Engineering and Physics are taking an active part.

That portion …

A Master Highway Transportation Plan For Tampa Metropolitan Area, Hillsborough County, Florida, Wilbur Smith And Associates

City and Regional Planning -- Florida

Fully recognizing the need for a comprehensive study of an integrated expressway and arterial highway system for the Tampa Metropolitan area, the State Road Department of Florida, jointly with the County of Hillsborough and the City of Tampa, engaged Wilbur Smith and Associates to develop a Master Highway Transportation Plan for the Tampa Area. The geographic limits of the study area are defined as the city limits of Tampa on the north, Tampa Bay on the west, Hillsborough Bay on the south, and U. S. Route 301 on the east. The development of basic planning data and necessary field studies …

Frictional Behavior Of Flat Sliding Surfaces, Elmer J. Weiter

Bachelors’ Theses

The objectives of this thesis are four in number. The first is to advance the basic understanding of the frictional behavior of materials in flat surface sliding, especially in the breakaway region where the coefficient of static friction is predominant. The second is to present an apparatus incorporating the use of flat contact surfaces, to provide accurate determination of the coefficient of static friction and some of the kinetic characteristics. The third is to establish a procedure of testing such that the static frictions is accurately analyzed to include variations with time and wear. The fourth objective is to establish …

A Method Of Developing Engineering Soil Maps For Kentucky, Robert C. Deen

Kentucky Transportation Center Research Report

No abstract provided.

An Investigation Of High-Strength, Deformed Steel Bars For Concrete Reinforcement, Sidney A. Guralnick, George Winter

CCFSS Library (1939 - present)

INTRODUCTION High strength steel as reinforcement for concrete has received some serious attention by researchers and by the construction industries as long ago as the early 1900' s. Recent developments abroad, notably in Sweden, Germany and Austria, have caused renewed interest in the use of this material in concrete structures. The term "high-strength" is somewhat ambiguous since it usually has been employed to describe the type of steel used in cables and strands for prestressed concrete or suspension bridge structures. Such steels commonly have proof stresses of the order of 200,000 psi. However, in the case of ordinary reinforced concrete …

Recovery Of Phthalic Acid, George Thomas Roberts

Theses

Crude phthalic acid from the fusion processing of alkyd resins was found to be recoverable by solvent extraction, neutralization-acidification, sublimation, distillation, esterificatton with monohydric alcohols, ion exchange or alkyd resin preparation.

The author proposes that alkyd resin preparation, based on analysis of the crude phthalic acid, is the most practical way for the alkyd resin manufacturer to recover the crude phthalic acid. No purification of the crude phthalic acid is necessary for this utilization and the resulting alkyd resin is saleable at a profit.

The Heat Treatment Of An Eight Percent Manganese-Titanium Alloy, Robert Alden Loucks

Bachelors Theses and Reports, 1928 - 1970

The subject of this particular investigation, manganese titanium alloy, has a sufficient amount of manganese present to retain beta upon quenching from the alpha plus beta or beta ranges. Thus, improvement of properties of this alloy is possible by selective heat treatments.

Artificial Rhodonite: It's Synthesis And X-Ray Diffraction Powder Pattern, Frank E. Jeniker

Bachelors Theses and Reports, 1928 - 1970

This report presents the investigation of three methods of synthesizing artificial rhodonite; fusion of silica and manganese dioxide, prolonged sintering of the compact of manganous carbonate and silica at below liquidus temperatures, and the precipitation by reaction of salts in an aqueous solution followed by sintering. In each case the rhodonitic product was of less than desired purity, containing varying amounts of silica, tephroite, and higher valence oxidized manganese forms, as well as aluminum.

Initial Bibliography Of Soviet Military Medicine, 1917-1950, Medical Information And Intelligence Agency, Robert Bolin , Depositor

United States Department of Defense Military Intelligence

This is a author list of more than 1000 articles about Soviet military medicine with a subject index.

This compilation is an initial listing of Soviet military articles, less specialized naval and aviation topics, from the time of the Bolshevik Revolution to the outbreak of the Korean conflict as they appeared in the Quarterly Cumulative Index, Volumes 1-11 and the Quarterly Cumulative Index Medicus, Volumes 1 - 55.

The subject headings searched are listed below and constituted 20,167 entries for this thirty three year period. 887 of these entries were of Soviet origin and comprised the publications of the 1,025 …

Investigation Of Plastic Deformation In Prestressed Concrete Slabs From Long Time Loading, Joe B. Roberts

Masters Theses

"It is the purpose of this research to investigate the creep in a thin concrete slab under a long-time prestress load with the compressive load being applied to the edge of the slab through a bearing plate of small dimensions.

Seven plain concrete slabs, 3' x 4' x 4", approximately one year old, made of normal cement and approved aggregate were subjected to the following loading conditions: (1) Three slabs loaded at the center of the greater dimension with a prestress load or 20,000 pounds applied over an area of eight square inches, (2) Three slabs loaded symmetrically at six …

Pumping Of Highway And Airfield Pavements: Technical Paper, Eldon J. Yoder

JTRP Technical Reports

No abstract provided.