Digital Commons Network^™

Leveraging Unmanned Aerial System Remote Sensing To Inform Energy And Water Balance Models For Spatial Soil Water Content Monitoring And Irrigation Management, Mitchell S. Maguire

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Irrigation has provided a means to produce more food and fiber throughout the world, converting low producing land into high yielding cropping systems in certain scenarios. The managing of irrigation has taken on various approaches as different locations have been constrained by different factors. Certain areas have significant ground and surface water available for irrigation while other areas struggle to meet irrigation demands due to limited water resources. These factors, along with the desire to increase crop water use efficiency, has provided the motivation to better understand crop water demands spatially within a field. A sub-field scale irrigation management study …

Composting Processes For Food Processing Wastes: A Review, Yung-Tse Hung, Kevin P. Holloman, Howard Paul, Christopher Huhnke

Civil and Environmental Engineering Faculty Publications

Composting of food processing waste was analyzed as a biological process and an engineered system. The goal is to establish fundamental principles and design criteria that would aid its adoption as waste management practice. Characteristics of the inflow, reactor, and outflow were evaluated. Success of the bioreactor was found to be largely dependent on microbial community structure, physical properties of biodegradable waste (BW), aeration, heat transfer, and time required for maturation. Static piles were the primary focus of this article for cost and energy efficiency.

Exploiting The Role Of Nanoparticles For Use In Hydrogel-Based Bioprinting Applications: Concept, Design, And Recent Advances, Aishik Chakraborty, Avinava Roy, Shruthi Polla Ravi, Arghya Paul

Chemical and Biochemical Engineering Publications

Three-dimensional (3D) bioprinting is an emerging tissue engineering approach that aims to develop cell or biomolecule-laden, complex polymeric scaffolds with high precision, using hydrogel-based “bioinks”. Hydrogels are water-swollen, highly crosslinked polymer networks that are soft, quasi-solid, and can support and protect biological materials. However, traditional hydrogels have weak mechanical properties and cannot retain complex structures. They must be reinforced with physical and chemical manipulations to produce a mechanically resilient bioink. Over the past few years, we have witnessed an increased use of nanoparticles and biological moiety-functionalized nanoparticles to fabricate new bioinks. Nanoparticles of varied size, shape, and surface chemistries can …

Design Validation Of A Multi-Stage Gradually Deploying Stent, Dillon J. Despain

Theses and Dissertations

Angioplasty, or the use of rapidly deploying stents, is a common treatment for reopening narrowed vasculature often caused by atherosclerotic plaque. However, in-stent restenosis (ISR) induced by intimal hyperplasia is a common challenge to angioplasty. High impact stresses from current stent deployment processes have been linked to intimal hyperplasia; thus a stent that is gradually deployed over a longer period of time holds potential to mitigate these stresses. This work hypothesizes that resorbable polymeric links can be used as a triggering mechanism to enable repeatably controlled deployment of a compliant nitinol stent design with the eventual goal of reducing intimal …

Metabolic Modeling And Omics-Integrative Analysis Of Single And Multi-Organism Systems: Discovery And Redesign, Mohammad Mazharul Islam

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Computations and modeling have emerged as indispensable tools that drive the process of understanding, discovery, and redesign of biological systems. With the accelerating pace of genome sequencing and annotation information generation, the development of computational pipelines for the rapid reconstruction of high-quality genome-scale metabolic networks has received significant attention. These models provide a rich tapestry for computational tools to quantitatively assess the metabolic phenotypes for various systems-level studies and to develop engineering interventions at the DNA, RNA, or enzymatic level by careful tuning in the biophysical modeling frameworks. in silico genome-scale metabolic modeling algorithms based on the concept of optimization, …

Utilization Of Electric Arc Furnace Dust As A Solid Catalyst In Biodiesel Production, Khaled El-Araby Khodary, Marwa Mohamed Naeem, Mai H. Roushdy

Chemical Engineering

World’s energy sources like petrochemical oils, natural gas and coal cause global warming and environmental pollution. Therefore, the traditional energy sources must be replaced by the renewable energy resources. Biodiesel has been recognized as one of the effective, green, renewable and sustainable fuels. This paper investigates the production of biodiesel from sunflower oil by using electric arc furnace dust (EAFD) as a heterogeneous solid catalyst. Four reaction variables, i.e., the reaction time, methanol-to-oil (M/O) molar ratio, reaction temperature and EAFD loading, were chosen to determine their effect on biodiesel production. The effect of the all reaction variables on the biodiesel …

Exploration Of Constant-Force Wristbands For A Wearable Health Device, Thomas Alexander Naylor

Theses and Dissertations

Wearable Health Devices (WHDs) are an emerging technology that enables continuous monitoring of vital signs during daily life. Issues with constant and consistent data acquisition have been found while WHD technology has developed. The force of the measurement area and movement of the sensors are key mechanical issues that need to be solved for WHDs to become a viable way to continuously monitor health conditions. This work explores Constant-Force Mechanisms (CFMs) as a solution to problems the current WHD industry faces. Additionally, the relationship between force provided from the mechanism, sensor pressure on the wrist, patient comfort, and sensor readings …

Degumming Of Hemp Fibers Using Combined Microwave Energy And Deep Eutectic Solvent, Bulbul Ahmed

LSU Master's Theses

Hemp is considered as one of the sustainable agricultural fiber materials. Degumming or surface modification of hemp bast is needed to produce single fibers for ensuing textile and industrial applications. The traditional degumming process necessitates a high amount of alkali, which causes detrimental environmental pollution. This study offers a new method to degum hemp fibers with reduced use of harmful alkali and precious water resources. In this work, hemp bast fibers were degummed by using combined microwave energy and deep eutectic solvent (DES). The properties of hemp fibers manufactured by this method were investigated and compared with the traditional alkali …

Evaluation Of Cell Concentration And Viability By Impedance Spectroscopy On Microfluidic Devices, Jason Eades

LSU Master's Theses

This document describes two distinct platforms that implement electrochemical impedance spectroscopy (EIS) within microfluidic devices for rapid, label-free cell analysis. Each study provides proof-of-concept evaluations of these devices for cell counting and viability analysis applications to mitigate some of the challenges associated with conventional methods. Chapter one includes background information on each version of EIS selected and motivations for the studies conducted. Chapter two describes the design and fabrication of a modular, reusable microfluidic device. Additionally, the methodology for and results from the application of this platform for the measurement of zebrafish sperm cell concentrations are presented. Chapter three describes …

Experimental Study Of Drying Yacon Tubers, U K. Khujakulov, Sh A. Sultanova, J E. Safarov

Technical science and innovation

This study discusses the method and experimental drying unit for drying yacon tubers at different temperatures. And also the scheme of experimental drying unit is given, which controls temperature, speed of warm air and shows the mass of dried material. The cross-sectional area of the flow in the tunnel is 20×20 cm, the thermal air passed horizontally through a chute with holes and a surface area of 12×12 cm. The exhaust gas did not circulate in this experiment. The accuracy of the temperature control system was 0.1 °C, the weight control system 0.1 g. The variation of moisture ratio depending …

Design Of Grain Moisture Control Devices For Flour Mills, Z M. Mukimov, P I. Kalandarov, O S. Logunova

Technical science and innovation

The article reports the results that occur in managing the dehulling process of output, which is the main process of processing grain. The study of the technical thawing processes was carried out the key factors influencing the consistency of the manufactured target product, where the hydrothermal treatment of the grain causes the initial properties of the grain to be altered. And due to the effects of moisture, temperature, as well as thawing decreases, wheat grain vitreousness, the degree of endosperm loosening increases, there is a redistribution of chemicals in the anatomical parts of the grain under the influence of developing …

Data-Driven Discovery Of The Governing Equation For The Transmission Lines System, Yanming Zhang, Lijun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

Sophisticated structures in the transmission line system introduce the nonuniformity and nonlinearity, which brings the challenge for its characterization and modeling. In this work, a novel data-driven method is proposed to derive the governing partial differential equations of the transmission line. Based on the polynomial interpolation of the spatial-temporal samples of current and voltage, the time and spatial derivatives can be obtained. Then, the ridge regression algorithm is adopted to determine the active spatial differential terms from the candidate functions. Three benchmarks, the uniform and nonuniform transmission line, and a soliton generation system, are provided to demonstrate the validity of …

Water Regulation For Enhancing Soil Quality Using Cactus Mucilage: A Theoretical And Experimental Analysis, Khuloud Alrashdi

USF Tampa Graduate Theses and Dissertations

As water is one of the primary sources of life, it is essential in an endless number of systems and processes to be utilized efficiently in nature and in practical applications. One of these applications includes farming, which depletes a lot of water as the water irrigation systems cover large soil areas. While water is a critical factor in growing crops, a question here stands, can the irrigation process be transformed? This is the overarching goal of my work since it is centered on studying if cactus mucilage, a natural substance, is capable of improving water absorption processes on crops …

Hardware Acceleration In Image Stitching: Gpu Vs Fpga, Joshua David Edgcombe

Masters Theses

Image stitching is a process where two or more images with an overlapping field of view are combined. This process is commonly used to increase the field of view or image quality of a system. While this process is not particularly difficult for modern personal computers, hardware acceleration is often required to achieve real-time performance in low-power image stitching solutions. In this thesis, two separate hardware accelerated image stitching solutions are developed and compared. One solution is accelerated using a Xilinx Zynq UltraScale+ ZU3EG FPGA and the other solution is accelerated using an Nvidia RTX 2070 Super GPU. The image …

Semi Real-Time Detection Of Subsurface Consolidation Defects During Concrete Curing Stage, Chongsheng Cheng, Zhigang Shen

Department of Construction Engineering and Management: Faculty Publications

Subsurface consolidation defect is a common issue in concrete pavement construction, and the hidden defects often require costly repairs after project delivery. Therefore, being able to identify this type of defect during construction will enable contractor to conduct quick repairs to avoid costly post-construction rework. In this paper a semi real-time detection approach using infrared thermography is introduced. The developed approach utilizes the hydration heat during curing time to identify the subsurface voids based on the regional temperature contrast. Experimental studies were conducted using artificial void-defect in different sizes and depths. The thermographic analysis is employed to locate the void-defects …

Vertical Profiles Of Trace Gas And Aerosol Properties Over The Eastern North Atlantic: Variations With Season And Synoptic Condition, Yang Wang, Guangjie Zheng, Michael P. Jensen, Daniel A. Knopf, Alexander Laskin, Alyssa A. Matthews, For Full List Of Authors, See Publisher's Website.

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Because of their extensive coverage, marine low clouds greatly impact the global climate. Presently, the response of marine low clouds to the changes in atmospheric aerosols remains a major source of uncertainty in climate simulations. One key contribution to this large uncertainty derives from the poor understanding of the properties and processes of marine aerosols under natural conditions and the perturbation by anthropogenic emissions. The eastern North Atlantic (ENA) is a region of persistent but diverse subtropical marine boundary layer (MBL) clouds, where cloud albedo and precipitation are highly susceptible to perturbations in aerosol properties. Here we examine the key …

A Systematic Review And Meta-Analysis On The Efficacy Of Stem Cell Therapy On Bone Brittleness In Mouse Models Of Osteogenesis Imperfecta, Lauren Battle, Shoshana Yakar, Alessandra Carriero

Publications and Research

There is no cure for osteogenesis imperfecta (OI), and current treatments can only partially correct the bone phenotype. Stem cell therapy holds potential to improve bone quality and quantity in OI. Here, we conduct a systematic review and meta-analysis of published studies to investigate the efficacy of stem cell therapy to rescue bone brittleness in mouse models of OI. Identified studies included bone marrow, mesenchymal stem cells, and human fetal stem cells. Effect size of fracture incidence, maximum load, stiffness, cortical thickness, bone volume fraction, and raw engraftment rates were pooled in a random-effects meta-analysis. Cell type, cell number, injection …

Methods , Systems , And Devices Relating To Surgical End Effectors, Shane M. Farritor, Thomas Frederick, Joe Bartels

Department of Mechanical and Materials Engineering: Faculty Publications

The embodiments disclosed herein relate to various medical device components , including components that can be incorporated into robotic and / or in vivo medical devices, and more specifically including end effectors that can be incorporated into such devices. Certain end effector embodiments include various vessel cautery devices that have rotational movement as well as cautery and cutting functions while maintaining a relatively compact structure. Other end effector embodiments include various end effector devices that have more than one end effector.

Oxygen Reactive Polymers For Treatment Of Traumatic Brain Injury, Parick S. Stayton, Menko P. Ypma, Peter A. Chiarelli, Joshua Sang Hun Park, Richard G. Ellenbogen, Julia Mengyun Xu, Pierre D. Mourad, Donghoon Lee, Anthony Convertime, Forrest M. Kievit

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Methods and compositions for treating traumatic brain injury . The methods and compositions utilize a multi - functional oxygen reactive polymer ( ORP ) that includes repeating units that include a reactive oxygen species ( ROS ) scavenging group and a polyalkylene oxide group . For theranostic applications , the oxygen reactive polymer fur ther includes a diagnostic group .

Study On Universal Characteristics Of Insect Population Ecological Network, Guilan Luo, Hongjun Hao, Wang Xiao, Zhang Mei

Journal of System Simulation

Abstract: In order to evaluate the current state of insect ecological development in Erhai wetland, complex network theory is used to construct a topological structure model of insect ecological network with insect populations as network nodes and correlations as edges. By analyzing the characteristic parameters of the model, it is concluded that the insect ecological network conforms to the characteristics of small world and scale-free network, and the node degree distribution obeys the power law distribution. The method of destroying the topology is used to simulate the dynamic evolution of the network ecology. The study shows that the disappearance of …

Transmission Process Prediction Of Novel Coronavirus Based On System Dynamics, Xuepeng Lu, Shang Jiao, Junhui Zhao, Lulu Lü, Zhou Li

Journal of System Simulation

Abstract: The transmission characteristics of novel coronavirus is considered and a new SE4IR2 model based on the principle of system dynamics is proposed. The US epidemic data from June to November is used to set the isolation rate and other parameters, and the SE4IR2 model is used to fit, analyze and predict the development of the epidemic trend in the next stage. The empirical part uses the data from June to November in the United States to achieve the parameters of the SE4IR2 model, obtains the parameter values in December and January through the time series prediction model, and compares …

Optimization Of Mechanical Properties At The Infarct Border Zone, Kaushik Sunder

LSU Master's Theses

A myocardial infarction (MI) occurs every 39 seconds in the United States. As of 2016, an estimated 550,000 new and 200,000 recurrent episodes of myocardial infarction (MI) occur each year in the United States was. Infarction is often distinguished by a considerable decrease in wall thickness and an increase in heart size or left ventricular volume. This behavior happens when there is a prolonged lack of blood flow, usually due to damage or clotting, which causes cardiomyocytes to die (CMs). The development of non-contractile infarct scarring is the primary pathophysiology of MI. While the infarct scar prevents myocardial rupture during …

Compliance With Hand Sanitizer Quality During The Sars-Cov-2 Pandemic: Assessing The Impurities In An Ethanol Plant, Gabriel Cohen, Nathan Kreutzer, Katie M. Mowat, Ashraf Aly Hassan, Bruce I. Dvorak

Department of Civil and Environmental Engineering: Faculty Publications

Using alcohol-based disinfectants is an effective method for preventing the spread of COVID-19. However, non-traditional manufacturers of alcohol-based disinfectants, such as ethanol plants, need to undergo additional treatment to curb their impurities to limits set by the Food and Drug Association (FDA) to produce alcohol-based disinfectants. To transform them to disinfectant-grade alcohol, 17 process streams in a dry-mill ethanol plant were analyzed to determine the quality parameters for acetaldehyde, acetal, propanol, methanol, and water, including chemical oxygen demand, total suspended solids, and nutrients. Results suggest that the process stream generated by the distillation column requires further treatment because the acetaldehyde …

Hydrochloric Acid Modification And Lead Removal Studies On Naturally Occurring Zeolites From Nevada, New Mexico, And Arizona, Garven M. Huntley, Rudy Luck, Michael Mullins, Nick Newberry

Michigan Tech Publications, Part 1

Four naturally occurring zeolites were examined to verify their assignments as chabazites AZLB-Ca and AZLB-Na (Bowie, Arizona) and clinoptilolites NM-Ca (Winston, New Mexico) and NV-Na (Ash Meadows, Nevada). Based on powder X-ray diffraction, NM-Ca was discovered to be mostly quartz with some clinoptilolite residues. Treatment with concentrated HCl (12.1 M) acid resulted in AZLB-Ca and AZLB-Na, the chabazite-like species, becoming amorphous, as confirmed by powder X-ray diffraction. In contrast, NM-Ca and NV-Na, which are clinoptilolite-like species, withstood boiling in concentrated HCl acid. This treatment removes calcium, magnesium, sodium, potassium, aluminum, and iron atoms or ions from the framework while leaving …

Th2/Th1 Cytokine Imbalance Is Associated With Higher Covid-19 Risk Mortality, Ana B. Pavel, Jacob W. Glickman, James R. Michels, Seunghee Kim-Schulze, Rachel L. Miller, Emma Guttman-Yassky

Faculty and Student Publications

A major component of COVID-19 severe respiratory syndrome is the patient’s immune response to the SARS-CoV-2 virus and the consequential multi-organ inflammatory response. Several studies suggested a potential role of CD4+ T cells in COVID-19 severe respiratory syndrome. We first hypothesized that there is a type 2 helper (Th2)/type 1 helper (Th1) imbalance in older age, male, asthma, smokers, and high ACE2 expression phenotype in the airway of non-infected patients. Next, we hypothesized that a Th2/Th1 imbalance may predict higher mortality in COVID-19 infected hospitalized patients with and without patient reported current asthma. We first analyzed publicly available gene expression …

Computational Investigation Of Biological Membranes, Allyson Karmazyn

Theses - ALL

Lipids are the building blocks of biological membranes, and the types of lipids that compose these cellular envelopes influence the physicochemical properties of the chemicals that can enter or exit the cell across the membrane. This work focuses on the lipid membrane compositions of eukaryotic (red blood cells) and prokaryotic (Pseudomonas aeruginosa) membranes. By analyzing the lipid-lipid and lipid-protein interactions results of the computational simulations, insights into lipid aggregation, bilayer leaflet behavior, membrane asymmetry, and small molecule transport through protein channels were obtained. The differences between prokaryotic and eukaryotic cell membranes are qualitative known; however, this work provides these concepts …

Integrated Water Quality Monitoring Of Skaneateles Lake Tributaries, Mengyi Zhang

Theses - ALL

Skaneateles Lake is the drinking water source for the City of Syracuse and surrounding areas. Harmful algal blooms (HABs) have been occurring in Skaneateles Lake every year since 2017 and posing a great threat to water quality and drinking water safety. Although the exact cause of the HABs is still unclear, sunlight, quiescent conditions, warm temperature, and elevated concentrations of nitrogen and phosphorus seem to favor the development of such blooms. In this study, a custom-built, low-cost, multi-parameter sensor unit was designed, built, and deployed on a third-order tributary. The unit collected high-frequency data for stage, temperature, pH, and dissolved …

Lipoprotein-Induced Increases In Cholesterol And 7-Ketocholesterol Result In Opposite Molecular-Scale Biophysical Effects On Membrane Structure, Manuela A.A. Ayee, Irena Levitan

Faculty Work Comprehensive List

Under hypercholesterolemic conditions, exposure of cells to lipoproteins results in a subtle membrane increase in the levels of cholesterol and 7-ketocholesterol, as compared to normal conditions. The effect of these physiologically relevant concentration increases on multicomponent bilayer membranes was investigated using coarse-grained molecular dynamics simulations. Significant changes in the structural and dynamic properties of the bilayer membranes resulted from these subtle increases in sterol levels, with both sterol species inducing decreases in the lateral area and inhibiting lateral diffusion to varying extents. Cholesterol and 7-ketocholesterol, however, exhibited opposite effects on lipid packing and orientation. The results from this study indicate …

Optical Printing Of Multiscale Hydrogel Structures, Zheng Xiong

Dissertations - ALL

Hydrogel has been a promising candidate to recapitulate the chemical, physical and mechanical properties of natural extracellular matrix (ECM), and they have been widely used for tissue engineering, lab on a chip and biophotonics applications. A range of optical fabrication technologies such as photolithography, digital projection stereolithography and laser direct writing have been used to shape hydrogels into structurally complex functional devices and constructs. However, it is still greatly challenging for researchers to design and fabricate multiscale hydrogel structures using a single fabrication technology.

To address this challenge, the goal of this work is the design and develop novel multimode …

Using Quantitative Stereology On High Resolution Sem Images To Estimate Diatom Percentages, Ariadna Covarrubias Ornelas

Dissertations and Theses

Diatoms are single-celled organisms of various shapes and sizes typically found in aquatic environments. When diatoms die, the organic material decomposes, and the outer skeletons (i.e., frustules) settle and accumulate as sedimentary deposits. These soils, called diatomaceous soils, exhibit nontraditional behavior since the diatom particles are typically hollow skeletons composed of amorphous silica with intricately patterned and abrasive surfaces. Recent studies have shown that diatomaceous soils are challenging geomaterials since even a small percentage of diatom particles will notably affect engineering behavior. Furthermore, laboratory studies on diatomaceous soil mixtures have demonstrated that many engineering soil properties depend on the percentage …