Digital Commons Network^™

Dioxins Contamination In Sediment And Their Effect On Accumulation In The Portuguese Oyster (Crassostrea Angulata) And White Shrimp (Litopenaeus Vannamei), Yin-Yu Chen, Yu-Sheng Wu, Hsiang-Yin Chen, Zhen-Hao Liau, Fan-Hua Nan

Journal of Marine Science and Technology–Taiwan

This research aims to realize whether the dioxin accumulation in the oyster and white shrimp which were cultured in the dioxin pollutant sediment. This presented evidence indicated that dioxin was detected in all experimental groups with high concentration accumulated in experiment animals. Observation of the concentration, the PCDD/F, 2,3,7,8-T4CDD was with high concentration in the sediment and declined with the time elapsed. Detection of the dioxin accumulated in the animal, the accumulative maximum amounts was in the oyster as 3746.16 (pg-TEQ/g d.w.) and in the shrimp as 705.44 (pg-TEQ/g d.w.). The detected amount of dioxin in the supernatant was quite …

A Meshless Method With Radial Basis Function For Solving Unsaturated Flow In Heterogeneous Porous Media, Cheng-Yu Ku, Chih-Yu Liu, Wei-Po Huang, Jing-En Xiao

Journal of Marine Science and Technology–Taiwan

This paper presents a study for solving unsaturated flow in heterogeneous porous media using the meshless method with the radial basis function (RBF). For modeling the nonlinear hydrological process in unsaturated zone, an exponential model is introduced in the Richards equation such that we may obtain the linearized Richards equation. We adopt the multiquadric function as the RBF in the meshless method for solving the linearized Richards equation. For simulating the unsaturated flow problems in layered heterogeneous soils, the flux and the head must satisfy the continuity condition at the interface. Several examples are carried out for modeling the hydrological …

Catch Rates And Distribution Pattern Of The Silky Shark, Carcharhinus Falciformis, Caught By The Taiwanese Large-Scale Longline Fishery In The Indian Ocean, Chia Yun Li, Xing-Han Wu, Shang Yin Vanson Liu, Sheng-Ping Wang, Wen-Pei Tsai

Journal of Marine Science and Technology–Taiwan

The silky shark, Carcharhinus falciformis, is widely distributed in tropical and temperate waters, and it is a common bycatch species for tuna longline fisheries. This study examined the distribution of and presents relative abundance indices of the silky shark in the Indian Ocean by using logbook and observer data from the Taiwanese large-scale tuna longline fishery between 2005 and 2019. Due to the high zero catch rate, a zero-inflated negative binomial (ZINB) model was used to standardize catch per unit effort. Due to a lack of detailed targeting information, the fishery strategy was identified by using cluster analysis based on …

Accumulation And Bioavailability Of Heavy Metals (Cadmium, Chromium, Nickel, Lead And Zinc) In Water And Sediment Samples In The Musa Creek, Northwest Coasts Of The Persian Gulf, Saghafiankhoo Sedigheh, Battaleb-Looie Sedigheh, Amanipoor Hakimeh, Dravishi Khatooni Javad, Ghanemi Kamal

Journal of Marine Science and Technology–Taiwan

The current study aimed to investigate the total concentrations of heavy metals in water and sediment samples as well as their bioavailability in sediments of Musa Creek. Twenty samples including 10 sediments and 10 water samples were collected from 10 stations. The concentration of heavy metals was measured using inductively coupled plasma–mass spectrometry. The bioavailability of heavy metals was carried out by first step of Tessier sequential extraction method so called single extraction in the manuscript. The results showed that the mean concentrations of cadmium, chromium, nickel, and zinc in water samples was 0.17, 7.44, 43.80, and 8.85 µg/L, respectively. …

Parametric Analyses Of The Dynamic Response And Fatigue Life Of A Compliant Vertical Access Riser With Internal Flow, Fuheng Li, Haiyan Guo, Xiaomin Li, Zhen Liu, Honglu Gu, Peng Cui

Journal of Marine Science and Technology–Taiwan

Subsea interventions on wellheads can be directly performed from a platform using a compliant vertical access riser (CVAR), thereby incurring tremendous economic benefits. The dynamic response and the fatigue damage of a CVAR subjected to regular waves are important for assessing its application feasibility. Therefore, a reasonable numerical model is presented for assessing the damage to a CVAR considering the internal flow using the slender rod theory. The finite element method combined with a Newmark-β scheme is employed to discretize the equations and update the time integration. The Palmgren-Miner rule is applied for fatigue life prediction, focusing on the wave-induced …

Using The Inverse Method To Investigate Flow Models For Mixed Convection Of Annular Finned Tube Heat Exchanger, Han-Taw Chen, Cheng-Hui You, Wei-Lun Hsu, Jiang-Ren Chang

Journal of Marine Science and Technology–Taiwan

The inverse heat conduction method (IHCM) and three-dimensional (3D) computational fluid dynamic (CFD) in combination with are used to select the appropriate flow model and near-wall treatment for the mixed convection of the annular finned tube heat exchanger. Thus, the numerical results obtained by all k-ε models and near-wall treatments are yielded for 4 m/s ≤ Va ≤ 5 m/s. First, IHCM combined with is applied to estimate and Q values. The obtained estimates of and Q are used as reference values for CFD. The results show that the Tk and results obtained by the standard (STD) k-ε model with …

Prediction Of Remaining Useful Life Of Wind Turbine Shaft Bearings Using Machine Learning, Jinsiang Shaw, Bingjie Wu

Journal of Marine Science and Technology–Taiwan

Wind turbines are a major trend in the current green energy market. Wind energy is abundant, and if utilized properly, can result in significant reductions in carbon emissions. Therefore, the development of wind power systems is urgently required. However, wind turbines are mainly built in unmanned areas. Regular inspections require substantial manpower and material resources, and doubts regarding the accuracy of the inspected data may occur. Therefore, it is necessary to establish an automatic diagnostic method for determining the remaining useful life (RUL) of a wind turbine to facilitate predictive maintenance. In this study, a multi-class support vector machine (SVM) …

Supply Chain Management For Superyacht Construction In Taiwan, Chun Pong Wong

Journal of Marine Science and Technology–Taiwan

In the last 20 years, Taiwan’s superyacht construction industry has performed well in the global market; however, numerous yacht builders still practice traditional supply chain management (SCM), which is often inefficient and regularly leads to time and cost overruns. This study aimed to answer two research questions: 1) what SCM challenges does the superyacht construction industry face? and 2) what SCM strategies and practices should be adopted to improve the efficacy and profitability of superyacht construction companies?

Numerous studies have explored supply chains (SCs) and SCM, but few have focused on the superyacht construction industry. Superyacht construction projects are highly …

The Impact Of Variable Curing Conditions On The Properties And Microstructures Of Mixtures Of Ground Granulated Blast Furnace Slag And Circulating Q1 Fluidized Bed Combustion Ash, Shao-Heng Hsieh, Wei-Chung Yeih, Ran Huang

Journal of Marine Science and Technology–Taiwan

The use of Portland cement, an important construction material, is encountering growing challenges because of its adverse environmental impacts. In this study, a new hydration system without Portland cement, which blends ground granulated blast furnace slag (GGBFS) and circulating fluidized bed combustion (CFBC) ash, was developed and tested. The variables included the effect of different types of CFBC ash, the mass ratios between CFBC ash and GGBFS, and different curing temperatures. The mortar properties were determined through the compressive strength test, absorption test, shrinkage test, X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The main results were as follows: …

A Marine Gis-Based Alert System To Prevent Vessels Collision With Offshore Platforms, Sheng-Long Kao, Ki-Yin Chang, Tai-Wen Hsu

Journal of Marine Science and Technology–Taiwan

How to effectively use an intelligent aid-to-navigation (AtoN) to prevent ships from accidentally colliding with offshore marine platforms (OMPs) is an important issue for maritime environment. This study proposes a novel collision alert system with three components to process Automatic Identification System (AIS) data in the cloud and broadcast AtoNs to ships in order to avoid collision with OMPs. The first component receives as input fuzzy linguistic variables (vessel size, relative speed, and approach distance) from the AIS data and calculates the radius of the guarding ring. The second component serves a Marine GIS (MGIS), where the system simulates the …

Piezoelectric Signals In Vascularized Bone Regeneration, Delfo D’Alessandro, Claudio Ricci, Mario Milazzo, Giovanna Strangis, Francesca Forli, Gabriele Buda, Mario Petrini, Stefano Berrettini, M. Jasim Uddin, Serena Danti, Paolo Parchi

School of Integrative Biological & Chemical Sciences (Formerly Dept. of Chemistry)

The demand for bone substitutes is increasing in Western countries. Bone graft substitutes aim to provide reconstructive surgeons with off-the-shelf alternatives to the natural bone taken from humans or animal species. Under the tissue engineering paradigm, biomaterial scaffolds can be designed by incorporating bone stem cells to decrease the disadvantages of traditional tissue grafts. However, the effective clinical application of tissue-engineered bone is limited by insufficient neovascularization. As bone is a highly vascularized tissue, new strategies to promote both osteogenesis and vasculogenesis within the scaffolds need to be considered for a successful regeneration. It has been demonstrated that bone and …

Optimizing Vaccine Supply Chains With Drones In Less-Developed Regions: Multimodal Vaccine Distribution In Vanuatu, Deng Pan

Dissertations

In recent years, many less-developed countries (LDCs) have been exploring new opportunities provided by drones, such as the capability to deliver items with minimal infrastructure, fast speed, and relatively low cost, especially for high value-added products such as lifesaving medical products and vaccines. This dissertation optimizes the delivery network and operations for routine childhood vaccines in LDCs. It analyzes two important problems using mathematical programming, with an application in the South Pacific nation of Vanuatu. The first problem is to optimize the nation-wide multi-modal vaccine supply chain with drones to deliver vaccines from the national depot to all health zones …

Signal Processing Capacity Of The Cellular Sensory Machinery Regulates The Accuracy Of Chemotaxis Under Complex Cues, Hye-Ran Moon, Soutick Saha, Andrew Mugler, Bumsoo Han

Purdue University Libraries Open Access Publishing Fund

Chemotaxis is ubiquitous in many biological processes, but it still remains elusive how cells sense and decipher multiple chemical cues. In this study, we postulate a hypothesis that the chemotactic performance of cells under complex cues is regulated by the signal processing capacity of the cellular sensory machinery. The underlying rationale is that cells in vivo should be able to sense and process multiple chemical cues, whose magnitude and compositions are entangled, to determine their migration direction. We experimentally show that the combination of transforming growth factor-β and epidermal growth factor suppresses the chemotactic performance of cancer cells using independent …

One Step At A Time: Robotics Lab Team Combines Talents In Quest For The Perfect Synthetic Tendon, Laura Meader

Colby Magazine

When Caitrin Eaton arrived at Colby a year ago, she named her new robotics lab C3PO. The name grabs students’ attention, but they’re drawn to the lab for another reason: Eaton’s cutting-edge research unites engineering and animal physiology to help robots walk more smoothly than Hollywood’s stiff-legged C-3PO robot.

Simulation Of Pedestrian In Multifunctional Passageway Of Metro Station Area Based On Social Force Model, Wang Xi, Zhang Rui, Fei Shuo, Minghang Yang

Journal of System Simulation

Abstract: Transitional passageway connecting subway stations and commercial facilities is generally designed as the multifunctional passageway, in which the traffic function is the main and the service function is the auxiliary. The impact of the service facilities on both sides of the passage on pedestrian traffic is difficult to be quantitatively analyzed and simulated and modeled. Through measurement, it is found that the viscous effect of service facilities on pedestrian traffic is mainly slowing down the speed or changing the trajectory direction. Through analyzing the horizontal influence range of service facilities, dividing the passage into different areas, and introducing the …

A Study In Soft Robotics: Metrics, Models, Control, And Estimation, Levi Thomas Rupert

Theses and Dissertations

Traditional robots, while capable of being efficient and effective for the task they were designed, are dangerous when operating in unmodeled environments or around humans. The field of soft robotics attempts to increase the safety of robots thus enabling them to operate in environments where traditional robots should not operate. Because of this, soft robots were developed with different goals in mind than traditional robots and as such the traditional metrics used to evaluate standard robots are not effective for evaluating soft robots. New metrics need to be developed for soft robots so that effective comparison and evaluations can be …

Research On Intelligent Gait Recognition Method Based On Plantar Pressure Perception, Xueqin Liu, Liu Ning, Su Zhong, Jingxiao Wang, Chaojie Yuan

Journal of System Simulation

Abstract: In view of the complexity and low accuracy of gait recognition in the past, an intelligent gait recognition method based on plantar pressure perception is proposed. The pressure data of the gait of plantar periodic motion is collected and the obtained gait data is classified by the vector machines,the intelligent gait recognition of plantar pressure perception is realized, and the accuracy of gait feature analysis is improved. Through experiment verification, the overall classification accuracy of the classifier is more than 90%, which verifies the rationality of the feature extraction. By evaluating the real state and the results of …

Optizimation Of Vaccination Supply Chain Based On Scg In Nanshan District, Zhenning Dong, Shunzhou Huang, Jiajun Chen, Huiqiong Zheng

Journal of System Simulation

Abstract: To optimize the vaccination network, inventory strategy and human resource allocation in Nanshan District, Supply Chain Guru's (SCG) network optimization method is used to select 50 alternative stations to decrease the fixed operating cost. SCG's inventory optimization method is used to set inventory strategy for each station, and simulation method is designed to compare total cost of all schemes. To optimize the opening days of vaccination stations, an medical personnel allocation rule is designed, which reduces some stations' opening days to 2 or 3 days and increases some stations' medical personnel. An simulation method is designed to compare the …

Surface Engineering Of Materials For Optical And Biomedical Applications, Syed Mohammad Abid Hasan

LSU Doctoral Dissertations

The mechanisms of various optical and medical applications depend on the characteristics of the surface of the material which is being used to detect the molecule of interest. In this work, we focused on some specific areas of surface engineering that play a vital role to improve the performance of some material characteristics. Firstly, we focused on the wettability of graphene, which is important for surface modification and thermal/fluidic properties. The level of transparency to van der Waals forces, chemical bonds, and electrostatic interactions between atoms and molecules on two sides of graphene single layer is not well understood. Our …

Quick - Release End Effector Tool Interface, Shane Farritor, Thomas Frederick

Department of Mechanical and Materials Engineering: Faculty Publications

The various embodiments herein relate to a coupling apparatus for a medical device having a coupler body, a cavity defined in the coupler body, a rotatable drive component disposed within the cavity and having at least two pin receiving openings, and an actuable locking ring disposed around the cavity.

Insights From Two Decades Of P-12 Engineering Education Research, Cary I. Sneider, Mihir K. Ravel

Journal of Pre-College Engineering Education Research (J-PEER)

The 21st century has seen a growing movement in the United States towards the adoption of engineering and technology as a complement to science education. Motivated by this shift, this article offers insights into engineering education for grades P-12, based on a landscape review of 263 empirical research studies spanning the two decades from January 2000 to June 2021. These insights are organized around three core themes: (1) students’ understandings, skills, and attitudes about engineering and technology; (2) effective methods of P-12 engineering education; and (3) benefits of P-12 engineering education. The insights are captured in the form of evidence-based …

Computationally Driven Design Of Shape-Controlled Polymeric Nanostructures, Davindra Tulsi

USF Tampa Graduate Theses and Dissertations

In the realm of shape control involving synthetic soft materials, block copolymers are ubiquitously exploited due to their ability to spontaneously self-assemble into a plethora of morphologies. The growing need in areas such as drug delivery, lithography, and microelectronics to generate new nanostructures demands ever finer control of copolymer self-assembly. It is desirable to better control the shape and size of soft nanostructures, with minimal post processing techniques to assert stability.

While there is an abundance of literature on diblock copolymer assembly, few relationships exist for sequence-controlled copolymers. It is well known that biological macromolecules are highly sequence specific and …

Single-Molecule Localization Microscopy Of 3d Orientation And Anisotropic Wobble Using A Polarized Vortex Point Spread Function, Tianben Ding, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

Within condensed matter, single fluorophores are sensitive probes of their chemical environments, but it is difficult to use their limited photon budget to image precisely their positions, 3D orientations, and rotational diffusion simultaneously. We demonstrate the polarized vortex point spread function (PSF) for measuring these parameters, including characterizing the anisotropy of a molecule’s wobble, simultaneously from a single image. Even when imaging dim emitters (∼500 photons detected), the polarized vortex PSF can obtain 12 nm localization precision, 4°–8° orientation precision, and 26° wobble precision. We use the vortex PSF to measure the emission anisotropy of fluorescent beads, the wobble dynamics …

Disaster Recovery System And Service Continuity Of Digital Library, Sivankalai S, Virumandi A, Sivasekaran K, Sharmila M

Library Philosophy and Practice (e-journal)

This paper will discuss catastrophe recovery and likelihood development for digital library structures. The article establishes a foundation for establishing Library continuity and disaster recovery strategies through the use of best practices. Library continuity development and catastrophe recovery are critical modules of the planning stage for a virtual digital library. Few institutions that experience a catastrophic disaster occurrence are powerless to recover always, but libraries can suggestively boost the possibility of long-term recovery of institutional digital resources by drafting a continuity and recovery strategy in preparation. This article is intended for system designers and administrators, as well as high-ranking library …

Efficient Management Of Nitrogen And Phosphorus At Centralized Water Reclamation Facilities, Helene Kassouf

USF Tampa Graduate Theses and Dissertations

A variety of process configurations are employed at municipal water reclamation facilities (WRFs), such as 5-stage Bardenpho, oxidation ditch, modified Ludzack-Ettinger (MLE) process, and sidestream recycle. However, all of these configurations face certain challenges in achieving optimum treatment of nitrogen and phosphorus. In this dissertation, the driving objectives were to: (1) quantitatively assess the fate of nitrogen and phosphorus (mass fluxes) at a treatment facility that employs biological nutrient removal, aerobic digestion, and sidestream recycle, (2) evaluate the performance of a microbial fuel cell (MFC) as a technology to remove nitrogen from sidestreams at a treatment plant that employs that …

The Photophysical Studies Of Transition Metal Polyimines Encapsulated In Metal Organic Frameworks (Mof’S), Jacob M. Mayers

USF Tampa Graduate Theses and Dissertations

Light harvesting systems provide a platform that converts solar energy into other forms of energy. One of the most common examples of photon capturing and conversion into chemical energy is observed in photosynthetic organisms in both Eurkaroyic and Prokaryotic domains. Nature provides a model for successful light harvesting platforms which includes the compartmentalization of antenna complexes that contain separated donor and acceptor pairs that participate in efficient electron transfer processes. In order to mimic such systems, crystalline porous materials that exhibits regular cavities and pore dimensions provides an excellent starting place. Metal organic frameworks (MOFs) are a class of porous …

Explorations And Developments In Multifunctionality, 3d Printing, And Accelerated Aging For Thermoplastics And Thermosets, Zachary Brounstein

Nanoscience and Microsystems ETDs

If the world is to progress through the fourth industrial revolution, rapid advances in materials science must complement new technological feats in manufacturing, computation and device functionality, and a broader understanding of how materials behave as they age and degrade. To this effect, much effort has been directed towards polymeric materials to address and solve many problems in this new era. This includes developing polymer composites that incorporate fillers to imbue multifunctionality, fabricating novel formulations for additive manufacturing, and conducting aging studies to assess the performance of these materials over long time spans. Building and expanding on the latest research …

Shortcut Nitrogen Removal In Photo-Sequencing Batch Reactor, Experiments, Dynamic Model And Full-Scale Design, Sahand Iman Shayan

USF Tampa Graduate Theses and Dissertations

Nitrogen is one of the essential elements for life; however, inefficient use of nitrogen creates major environmental problems. Nitrogen-rich streams from urban areas, farms, and wastewater treatment plants (WWTPs) lead to surface and groundwater contamination, resulting in eutrophication, hypoxia, and notable environmental, public health and economic damage. Ammonia is a form of nitrogen that can be created during industrial or biological nitrogen fixation or decomposition of biomass. Anaerobic digesters (ADs) in WWTP generate biogas from collected sludge from primary and secondary clarifiers to achieve energy recovery in the plant. However, sidestream effluent from dewatering AD sludge contains high concentrations of …

Aerobic Copper-Promoted Oxidative Dehydrosulfurative Carbon-Oxygen Cross-Coupling Of 3,4-Dihydropyrimidine-1: H -2-Thiones With Alcohols, Jihong Lee, Yujeong Kwon, Dong-Chan Lee, Jeong Hun Sohn

Chemistry and Biochemistry Faculty Research

An aerobic Cu-promoted oxidative dehydrosulfurative carbon-oxygen cross-coupling of 3,4-dihydropyrimidin-1H-2-thiones (DHPMs) with both aliphatic and aromatic alcohols is described. Together with the ready availability of DHPMs and both alcohols, the method furnishes facile access to biologically valuable 2-alkoxypyrimidines with rapid diversification.

A System Architecture For Water Distribution Networks, Noha Abdel-Mottaleb

USF Tampa Graduate Theses and Dissertations

This dissertation examines structure-function relationships of water distribution networks (WDNs), with focus on improving the decision-making process for water utilities. WDNs are lifeline infrastructure systems, necessary for the functioning of cities. Yet water utilities around the world struggle with emerging challenges that include but are not limited to aging infrastructure components, limited budgets, increased interdependencies between infrastructure systems, increased rates of urbanization, and increasing extreme weather conditions. This is why enhancing the performance of WDNs is a priority for water utilities around the world. This research begins to delineate a system architecture for WDNs and evaluates the use of various …