Digital Commons Network^™

Two Case Histories Of Blast- & Traffic-Induced Vibrations On The Stability Of Burrows Of Endangered Sensitive Ground Dwelling Animals, John A. Barneich, Jay Arabshshi, Steven K. Duke

International Conference on Case Histories in Geotechnical Engineering

Two case histories are presented where jurisdictional authorities expressed a concern regarding the impact of blast and construction traffic induced vibrations on the stability of the burrows of endangered ground dwelling species. The first case history involved the use of explosives proposed to be used for a seismic survey in the vicinity of desert tortoise burrows. The concern was that the use of explosives in the vicinity of a tortoise burrow could cause the collapse of an occupied burrow potentially trapping the tortoise within the burrow. Field tests were performed by constructing artificial tortoise burrows and inducing progressively higher vibration …

A Model Based On Mechanics To Predict Settlements In Bioreactor Landfills, C. H. Hettiarachchi, J. N. Meegoda, J. P. Hettiaratchi

International Conference on Case Histories in Geotechnical Engineering

Prediction of waste settlement behavior during the construction phase of a landfill is vital to effective functioning of leachate recirculation systems and gas collection pipe network, yet prediction of waste settlement is complex and difficult to perform. Few models, are currently available which can be used to calculate landfill settlement of the entire waste thickness after closure without accounting for variation in density and other parameters with depth. By starting after closure, these models do not account for settlements during construction. The use of entire depth does not allow for the calculation of strains at different depths. When landfills are …

Impact Of Geographical Information Systems On Geotechnical Engineering, J. David Rogers, Ronaldo Luna

International Conference on Case Histories in Geotechnical Engineering

Over the last four decades Geographical Information Systems (GIS) have emerged as the predominant medium for graphic representation of geospatial data, including geotechnical, geologic and hydrologic information routinely used by geotechnical and geoenvironmental engineers. GIS allow unlimited forms of spatial data to be co-mingled, weighted and sorted with any number of physical or environmental factors. These data can also be combined with weighted political and aesthetic values to create hybrid graphic products capable of swaying public perceptions and decision making. The downside of some GIS products is that their apparent efficacy and crispness can also be deceptive, if data of …

Gsbs News, Spring 2003-2004, Graduate School Of Biomedical Sciences, University Of Texas Health Science Center At Houston/M.D. Anderson Cancer Center

GSBS News

No abstract provided.

Towards A General Methodology For Designing Sub-Noise Measurement Procedures, Roberto Osegueda, George R. Keller, Scott A. Starks, R. Araiza, Dm. Bizyaev, Vladik Kreinovich

Departmental Technical Reports (CS)

In many practical situations, the measurement result z depends not only on the measured value x, but also on the parameters s describing the experiment's setting and on the values of some auxiliary quantities y; the dependence z=f(x,s,y) of z on x, s, and y is usually known. In the ideal case when we know the exact value of the auxiliary parameter y, we can solve the above equation and find the desired value x. In many real-life situations, we only know y with some uncertainty, and this uncertainty leads to additional uncertainty in x.

If we are trying to …

Santa Clara Magazine, Volume 45 Number 4, Spring 2004, Santa Clara University

Santa Clara Magazine

8 - TOP TEACHERS By Elizabeth Kelley Gillogly '93-Meet three SCU professors who received University awards for teaching excellence and curriculum innovations.

10 - BLAZING THE TRAIL By Victoria Hendel De La O. There are many unique challenges and rewards for the hundreds of first-generation college students at SCU.

14 - THE SCU DIFFERENCE By Margaret Avritt. The value of an SCU education goes beyond statistics and scores. Students at this university have experiences that engage and transform them.

18 - MIND OVER MONEY By Hersh Shefrin and Meir Statman. Two SCU professors of finance explore how psychology can help …

Nebraska Blueprint - Spring 2004

Nebraska Blueprint (Student Publication)

Table of Contents:

From the Editor
A Well-Earned Yet Charmed Life by Tom Cudd
Combating Tomorrow’s Diseases Today by Kevin Mlnarik
Where We're Headed by Cecelia Orwig
Not Today But Here Tomorrow by Tom Cudd
My So Called Life: 2054 by Cecelia Orwig
What It's All About by Tom Cudd
Why Don't Engineers get involved? by Tom Cudd
ASME Hosts Successful Conference

Ultimate Strength Prediction In Fiberglass/Epoxy Beams Subjected To Three-Point Bending Using Acoustic Emission And Neural Networks, Michele D. Dorfinan

Master's Theses - Daytona Beach

The research presented herein demonstrates the feasibility of predicting ultimate strengths in composite beams subjected to 3-point bending using a neural network analysis of acoustic emission (AE) amplitude distribution data. Fifteen unidirectional fiberglass/epoxy beams were loaded to failure in a 3-point bend test fixture in an MTS load frame. Acoustic emission data were recorded from the onset of loading until failure. After acquisition, the acoustic emission data were filtered to include only data acquired up to 80 percent of the average ultimate load.

A backpropagation neural network was constructed to predict the ultimate failure load using these AE amplitude distribution …

2004 (Spring) Ensi Informer Magazine, Morehead State University. Engineering Sciences Department

ENSI Informer Magazine Archive

The ENSI Informer Magazine published in the spring of 2004.

Fabrication, Characterization, And Chemical Sensing Of Silicon Dioxide Microcantilevers, Yanjun Tang

Doctoral Dissertations

The objective of this work is to design and fabricate an advanced silicon dioxide microcantilever sensor and to investigate chemical and biological sensing by microtechnology.

Microcantilever sensor technology has many advantages including fast response time, lower cost of fabrication, the possibility of sensor arrays with small overall dimensions, the ability to explore microenvironments, and improved portability for field applications. For all of these advantages, microcantilever chemical and biological sensors have drawn more and more attention.

So far, all other microcantilevers were designed and fabricated for AFM applications. We developed a novel SiO2 microcantilever especially for chemical and biological sensor applications. …

Scaling And Characterization Of Direct Current Glow Discharge Plasma In Atmospheric Air, Abdel-Aleam Hefney Mohamed

Electrical & Computer Engineering Theses & Dissertations

A microhollow cathode discharge was used as a plasma cathode to sustain a stable direct current glow discharge in atmospheric pressure air. The volumetric scale of glow discharge increased from the millimeter to the centimeter range by extending the plasma in lateral and axial directions. In the axial direction, the length of the glow discharge column was varied from 1 mm to 2 cm, with the sustaining voltage increasing linearly with the glow discharge column length. Extension in the lateral direction was obtained by operating discharges in parallel. The glow discharge plasma of the parallel discharge columns was found to …

Controlled Release Systems For Non-Viral Vectors, Angela K. Pannier, Lonnie D. Shea

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Adapting controlled release technologies to the delivery of non-viral vectors has the potential to overcome barriers that limit gene therapy. Controlled release systems can enhance gene delivery and increase the extent and duration of transgene expression relative to more traditional delivery methods. Delivery vehicles for controlled release are fabricated from natural and synthetic polymers, which function either by releasing the vector into the local tissue environment or by maintaining the vector at the polymer surface. Vector release or binding is regulated by the effective affinity of the vector for the polymer, which depends upon the strength of molecular interactions. These …

Willamette River Basin Temperature Tmdl Model: Model Scenarios, Robert Leslie Annear, Michael Lee Mckillip, Sher Jamal Khan, Chris Berger, Scott A. Wells

Civil and Environmental Engineering Faculty Publications and Presentations

The State of Oregon Department of Environmental Quality (DEQ) is developing a TMDL for temperature in the Willamette River basin shown in Figure 1. The study area included the Willamette River and all major tributaries (except the Tualatin River where a TMDL process was already concluded). A large section of the Columbia River was also modeled to provide adequate boundary representation of tidal flows in the lower Willamette River. The Willamette River below the Oregon City Falls in the Portland metropolitan area has a typical diurnal tidal range of 1 m. The development of a dynamic model of temperature and …

Prediction Of Rigid Body Aircraft Acceleration Response Due To Atmospheric Disturbances, Billy Keith Buck

Mechanical & Aerospace Engineering Theses & Dissertations

Methodology to predict aircraft transient motion resulting from flight within an unsteady atmospheric environment, coupled with validation using flight test data is proposed. A family of five linear dynamic models is developed for describing the normal acceleration throughout an aircraft cabin due to vertical gust excitation. The five models successively build upon each other by incorporating higher fidelity gust penetration effects while simultaneously maintaining a unified modeling framework. Six wind fields reconstructed from flight test data are used to excite the vehicle models. Simulation responses are compared with forward, center, and aft accelerometer response data recorded during the test. Each …

Models, Composability, And Validity, Eric Werner Weisel

Computational Modeling & Simulation Engineering Theses & Dissertations

Composability is the capability to select and assemble simulation components in various combinations into simulation systems to satisfy specific user requirements. The defining characteristic of composability is the ability to combine and recombine components into different simulation systems for different purposes. The ability to compose simulation systems from repositories of reusable components has been a highly sought after goal among modeling and simulation developers. The expected benefits of robust, general composability include reduced simulation development cost and time, increased validity and reliability of simulation results, and increased involvement of simulation users in the process. Consequently, composability is an active research …

Causes Of Proteolytic Degradation Of Secreted Recombinant Proteins Produced In Methylotrophic Yeast Pichia Pastoris: Case Study With Recombinant Ovine Interferon-Τ, Mehmet İnan, Michael M. Meagher, Bradley A. Plantz, Jayanta Sinha

Papers in Biochemical Engineering

It was observed that during fermentative production of recombinant ovine interferon-τ (r-oIFN-τ) in Pichia pastoris, a secreted recombinant protein, the protein was degraded increasingly after 48 h of induction and the rate of degradation increased towards the end of fermentation at 72 h, when the fermentation was stopped. Proteases, whose primary source was the vacuoles, was found in increasing levels in the cytoplasm and in the fermentation broth after 48 h of induction and reached maximal values when the batch was completed at 72 h. Protease levels at various cell fractions as well as in the culture supernatant were …

Bio-Chip, Photoluminescent Methods For Identifying Biological Material, And Apparatuses For Use With Such Methods And Bio-Chips, Ravi F. Saraf

Department of Chemical and Biomolecular Engineering: Patents

A method detects binding of molecules, advantageously without tagging molecules in the sample. A sensor is used in which is included a single stranded nucleic acid sequence and a photoluminescent material in respective layers. After the sensor is exposed to a biological sample for sufficient time for its single stranded nucleic acid sequence to bind to a material of interest, photoluminescence from the sensor can be measured. An apparatus for tagging-free detection of binding of molecules also is provided. Methods of making tagging-free sensors are provided. Also, tagging-free methods to detect binding of antigens and related devices are disclosed.

Experimental Investigation Into The Aerodynamic Performance Of Both Rigid And Flexible Wing Structured Micro-Air-Vehicles, Anthony M. Deluca

Theses and Dissertations

The Air Force Research Lab, Munitions Directorate, Eglin Air Force Base, Florida has designed a man-portable carbon-fiber Micro-Air-Vehicle (MA V) used for on-the-spot surveillance by Special Operations Forces (SOF) for enemy reconnaissance as well as post-strike Battle Damage Assessment (BDA).The main goals of this experiment are: 1) characterize the flow quality of the new AFIT 3' x 3' wind tunnel and 2) determine the aerodynamic performance characteristics of the 24" span, 6" chord flexible and rigid wing MA V s. The turbulent intensity of the wind tunnel was approximately 2%. Both MA Vs had an average lift slope within 3.5% …

An Experimental Design For Measuring In Situ Radiation Damage To A Piezoelectric Transducer, Michael R. Severson

Theses and Dissertations

An experiment was conducted investigating the use of an acoustic pulse waveguide to collect response measurements from three piezoelectric acoustic emission (AE) transducers while the transducers were exposed to an active nuclear reactor neutron flux ranging from 1 x 10¹¹ to 2.4 x 10¹² neutrons per sq cms. Material, mechanical, and radiation studies were performed to determine a practical design for the construction of the experiment. Discreet frequency pulses generated by an Arbitrary Waveform Generator were transmitted by an aluminum waveguide to the core of the Ohio State University Research Reactor (OSURR). Three AF transducers coupled to the …

Discovering The Merit Of The Wavelet Transform For Object Classification, Matthew D. Eyster

Theses and Dissertations

Vision is the primary sense by which most biological systems collect information about their environment. Computer vision is a branch of artificial intelligence concerned with endowing machines with the ability to understand images. Object recognition is a key part of machine vision with far reaching benefits ranging from target recognition, surveillance systems, to automation systems. Extraction of salient features from an image is one of the key steps in object recognition. Typically, geometric primitives are extracted from an image using local analysis. However, the wavelet transform provides a global approach with good locality. Additionally, the directional and multiresolution properties may …

Carbon Fiber For Air Filtration, Marit Jagtoyen, Francis J. Derbyshire, Rosemary Anne Alexander Derbyshire

Center for Applied Energy Research Faculty Patents

Described are filters containing free-activated carbon fibers or activated carbon fibers in the form of a composite used for filtering a variety of contaminants, including pathogens, from air. These filters can provide effective and efficient removal of contaminants from air, requiring only short contact time between the air being filtered and the filter itself, with only a minimum pressure drop across the filter. The characteristics of these filters allow for effective filtration with only thin filter layers being required. The process of filtering air utilizing these filters is also disclosed.

Flight Physician - March, 2004, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A sixteen page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

Inside Unlv, Katrina Hudak, Carol C. Harter, James Frey

Inside UNLV

No abstract provided.

Astronaut Eva Exposure Estimates From Cad Model Spacesuit Geometry, Giovanni De Angelis, Brooke M. Anderson, William Atwell, John E. Nealy, Gary D. Qualls, John W. Wilson

Mathematics & Statistics Faculty Publications

Ongoing assembly and maintenance activities at the International Space Station (ISS) require much more extravehicular activity (EVA) than did the earlier U.S. Space Shuttle missions. It is thus desirable to determine and analyze, and possibly foresee, as accurately as possible what radiation exposures crew members involved in EVAs will experience in order to minimize risks and to establish exposure limits that must not to be exceeded. A detailed CAD model of the U.S. Space Shuttle EVA Spacesuit, developed at NASA Langley Research Center (LaRC), is used to represent the directional shielding of an astronaut; it has detailed helmet and backpack …

Isomer Energy Source For Space Propulsion Systems, Benjamin L. Johnson

Theses and Dissertations

Presented in this work are the results of an investigation of alternative means for powering spacecraft and launch vehicles with energy sources other than chemical combustion. Nuclear thermal propulsion and the energy release of a nuclear spin isomer present potential for increased rocket performance with compact, high-energy fuel sources replacing the combustion engines of the Delta IV-H 1st and 2nd stage vehicles. Analysis of historical fission designs along with the isomer hafnium-178-m2 in a particle bed configuration was conducted. Energy storage levels of 1.3 GJ/g are possible with this material, though the successful triggering and maintenance of a chain reaction …

Swarming Reconnaissance Using Unmanned Aerial Vehicles In A Parallel Discrete Event Simulation, Joshua J. Corner

Theses and Dissertations

Current military affairs indicate that future military warfare requires safer, more accurate, and more fault-tolerant weapons systems. Unmanned Aerial Vehicles (UAV) are one answer to this military requirement. Technology in the UAV arena is moving toward smaller and more capable systems and is becoming available at a fraction of the cost. Exploiting the advances in these miniaturized flying vehicles is the aim of this research. How are the UAVs employed for the future military? The concept of operations for a micro-UAV system is adopted from nature from the appearance of flocking birds, movement of a school of fish, and swarming …

Measuring The Risk Of Shortfalls In Air Force Capabilities, William E. Woodward

Theses and Dissertations

The U.S. Air Force seeks to measure and prioritize risk as part of its Capabilities Review and Risk Assessment (CRRA) process. The goal of the CRRA is to identify capability shortfalls, and the risks associated with those shortfalls, to influence future systems acquisition. Many fields, including engineering, medicine and finance, seek to model and measure risks. This research utilizes various risk measurement approaches to propose appropriate risk measures for a military context. Specifically, risk is modeled as a non-negative random variable of severity. Four measures are examined: simple expectation, a risk-value measure, tail conditional expectation, and distorted expectation. Risk measures …

Improving The Estimation Of Military Worth Of The Advanced Tactical Laser Through Simulation Aggregation, Michael T. Cook

Theses and Dissertations

Fielding High Energy Laser (HEL) weapon systems presents technological challenges as well as employment and financial challenges. The risk associated with the challenges mandates the development process include computer simulation models capable of predicting weapon system performance from the engineering level to assessing the military worth of employing HEL systems in combat scenarios. This research effort focuses on developing laser performance data at a higher fidelity engagement model and integrating the performance data into a mission level model. The propagation of the laser from the transmitting aperture to the target is modeled at the engagement level through the employment of …

Characterization Of Microbial Processes That Degrade Chlorinated Solvents In A Constructed Wetland Using Organic Acid And Inorganic Anion Concentration Profiles, Chad B. Bondurant

Theses and Dissertations

Chlorinated solvents have been used in industrial cleaning and degreasing processes in the United States since the early 1900s, and their induction into the environment increased significantly with the growth of industrial processes over the past century. PCE, TCE and their daughter products have been associated with a number of human health concerns and are currently the most common contaminants found in groundwater in the United States. Wetlands possess characteristics necessary for the complete degradation of chlorinated ethenes by microorganisms via anaerobic and aerobic regions that foster the necessary oxidation-reduction conditions. Organic acid and inorganic anion concentrations were evaluated in …

Demonstrating Optothermal Actuators For An Autonomous Mems Microrobot, Francis R. Szabo

Theses and Dissertations

There are numerous applications for microrobots which are beneficial to the Air Force. However, the microrobotics field is still in its infancy, and will require extensive basic research before these applications can be fielded. The biggest hurdle to be solved, in order to create autonomous microrobots, is generating power for their actuator engines. Most present actuators require orders of magnitude more power than is presently available from micropower sources. To enable smaller microrobots, this research proposed a simplified power concept that eliminates the need for on-board power supplies and control circuitry by using actuators powered wirelessly from the environment. This …