Digital Commons Network^™

Incorporating Feedback From Multiple Sensory Modalities Enhances Brain–Machine Interface Control, Aaron J. Suminski, Dennis C. Tkach, Andrew H. Fagg, Nicholas G. Hatsopoulos

Biomedical Engineering Faculty Research and Publications

The brain typically uses a rich supply of feedback from multiple sensory modalities to control movement in healthy individuals. In many individuals, these afferent pathways, as well as their efferent counterparts, are compromised by disease or injury resulting in significant impairments and reduced quality of life. Brain–machine interfaces (BMIs) offer the promise of recovered functionality to these individuals by allowing them to control a device using their thoughts. Most current BMI implementations use visual feedback for closed-loop control; however, it has been suggested that the inclusion of additional feedback modalities may lead to improvements in control. We demonstrate for the …

The Application Of E-Technology For Marine Information Service, Lien-Kwei Chien, Tsung-Shen Feng, Chieh-Cheng Yen, Beng-Chun Lee, Heng-Wen Chang

Journal of Marine Science and Technology–Taiwan

The purpose of this study is to establish the multi-function querying system by applying e-technology in marine data. Subjects tendency technology is new concept in system designing process of this study which originate from simulation language that was replace the structural technology. We also investigate the statistical characteristics of ocean waves and surges over Taiwan waters by cluster and return period analysis. Marine drifter track analysis and search area determination system were also analysis and import to GIS querying system. In order to make the locations of the near shore ships and sailing data could be easily convey through wireless …

Modeling And Testing Of Dna Motion For Nanoinjection, Regis Agenor David

Theses and Dissertations

A new technique, called nanoinjection, is being developed to insert foreign DNA into a living cell. Such DNA transfection is commonly used to create transgenic organisms vital to the study of genetics, immunology, and many other biological sciences. In nanoinjection, DNA, which has a net negative charge, is electrically attracted to a micromachined lance. The lance then pierces the cell membranes, and the voltage on the lance is reversed, repelling the DNA into the cell. It is shown that DNA motion is strongly correlated to ion transport through a process called electrophoresis. Gel electrophoresis is used to move DNA using …

Purification Of Synthetic Oligomers, Shiyue Fang

Michigan Tech Patents

This invention provides a novel method for purifying synthetic oligomers comprising capping, polymerizing and separating any failure sequences produced during oligomer synthesis. Either the failure sequence or the full-length oligomer may be polymerized. Optionally, small molecule impurities may also be incorporated into the polymerized material. The invention provides novel capping agents having a polymerizable functional group. The invention also provides kits comprising at least one composition of the present invention.

Modeling Heat Transfer During Cooling Of Ready-To-Eat Meat And Poultry Products Using Three-Dimensional Finite Element Analysis And Web-Based Simulation, Jihan F. Cepeda Jimenez

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

The meat industry is required to comply with processing performance standards for preventing the growth of foodborne pathogens in products. These performance standards, established by the United States Department of Agriculture - Food Safety and Inspection Service (USDA-FSIS) require a reduction of Salmonella spp (lethality standard) and limit the growth of sporeforming bacteria (stabilization standard) in certain processed meat products. In general, strategies used to comply with these standards are associated with thermal processing. Meat processors have difficulties complying with these performance standards. Moreover, thermal processing deviations are an issue in the meat industry that generate uncertainty regarding the safety …

A Space Acquisition Leading Indicator Based On System Interoperation Maturity, Jason T. Shibata

Theses and Dissertations

The Department of Defense‘s space acquisition enterprise has experienced numerous challenges since the advent of space power. Space borne capabilities are needed more than ever, but space acquisition frequently fails to meet its goals. The decades of space acquisition experience form a rich history that can be used to build a leading indicator of success to enable effective program execution. First, the space acquisition areas of greatest concern were determined to be cost, schedule and requirements. These areas are considered as systems composed of the people, processes and products that execute the program. Second, the vital interoperation characteristics, or attributes …

Synthesis And Characterization Of Electrospun Gelatin/Dendrimer Scaffold Encapsulated With A Silver As A Potential Antimicrobial Wound Dressing, Alpana Dongargaonkar

Theses and Dissertations

A novel nanofiber scaffold was fabricated and characterized as a potential antimicrobial wound dressing. Half generation polyamidoamine (PAMAM) dendrimer G3.5 was covalently conjugated to gelatin. Gelatin alone or with gelatin-dendrimer conjugates was electrospun into nanofiber scaffolds. Gelatin is a derivative of natural collagen, and it is biocompatible, non-toxic and inexpensive, making it a desirable component in a wound dressing. Dendrimers are synthetic polymers comprising of a central core, internal branches and reactive surface groups. They provide a structurally controlled architecture for drug release. Silver was incorporated into the scaffold in situ due to its broad spectrum of antimicrobial properties. The …

Flow Vision For Autonomous Underwater Vehicles Via An Artificial Lateral Line, Nam Nguyen, Douglas L. Jones, Yingchen Yang, Chang Liu

Mechanical Engineering Faculty Publications

Most fish have the capability of sensing flows and nearby movements even in dark or murky conditions by using the lateral line organs. This enables them to perform a variety of underwater activities, such as localizing prey, avoiding predators, navigating in narrow spaces, and schooling. To emulate this capability for Autonomous Underwater Vehicles, we developed an artificial lateral line using an array of Micro-Electro-Mechanical-Systems (MEMS) flow sensors. The signals collected via the artificial lateral line are then processed by an adaptive beamforming algorithm developed from Capon's method. The system produces 3D images of source locations for different hydrodynamic activities, including …

Development Of An Integrated Soil Properties Mapping System, Rajveer S. Dhillon

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

One of the main goals of precision agriculture (PA) is to define spatial variability in soil properties within an agricultural field to make decisions that can maximize profitability and reduce negative environmental impact. Various soil sensor systems have been developed over the years to map soil properties on-the-go. In this study, an Integrated Soil Mapping System (ISMS) was developed to predict soil water content, soil organic matter, and soil mechanical resistance on-the-go using a capacitance moisture sensor, an optical sensor, and a load cell sensor respectively. These sensors were mounted on the ISMS for acquiring three different data layers at …

A Microfluidic Device To Establish Concentration Gradients Using Reagent Density Differences, Qingjun Kong, Richard A. Able, Jr., Veronica Dudu, Maribel Vazquez

Publications and Research

Microfabrication has become widely utilized to generate controlled microenvironments that establish chemical concentration gradients for a variety of engineering and life science applications. To establish microfluidic flow, the majority of existing devices rely upon additional facilities, equipment, and excessive reagent supplies, which together limit device portability as well as constrain device usage to individuals trained in technological disciplines. The current work presents our laboratory-developed bridged microLane system, which is a stand-alone device that runs via conventional pipette loading and can operate for several days without need of external machinery or additional reagent volumes. The bridged microLane is a two-layer polydimethylsiloxane …

Design Of Assembly Lines With The Concurrent Consideration Of Productivity And Upper Extremity Musculoskeletal Disorders Using Linear Models, Zhan Xu

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

The productivity of assembly lines is considerably affected by the health condition of assembly workers, and work-related musculoskeletal disorders (WMSDs) are common occupational diseases among assembly workers due to repetitive motions or heavy working loads. The conventional approaches to decreasing WMSD risks in the assembly lines include slowing the work-pace or applying job rotations. These adjustments usually focus on individual assembly workers at the station level but not the work allocation among the workers at the whole assembly line level, and thus may decrease the line productivity. To avoid these negative effects, some research started considering ergonomic characteristics at the …

A Predictive Modeling For Water Consumption And Wastewater Flow Management For A Food Processing Manufacturer, Jairo A. De Jesus

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

The City of Cumming, GA, issues special permits for industrial users of sewer services, who meet one or more criteria of discharge regulations. The criteria includes discharge of 25,000 gallons per day or more of processed wastewater, the presence for the potential to inhibit the Advanced Water Reclamation Facility (AWRF) treatment processes, the potential to cause AWRF’s bio-solids to be contaminated, and other regulations. The Food Processing Manufacturer in this study is a meat processing facility (processes pork cooked sausage) and its operation and associated wastewater treatment plant meets at least one of the criteria requiring a special sewer service …

Investigating Wood Welding Parameters Using A Prototype Welding Machine, Timothy R. Melin

Master's Theses

Understanding how different processing variables influence wood welded bonds is vital if the technique will ever be used to create engineered lumber without using adhesives. A variation of vibration welding, wood welding uses pressure and friction to bond materials together. During welding, heat causes a softening in the wood, a naturally occurring composite material. This softening leads to fiber entanglement and a bond forms upon cooling.

The goal of this research was to investigate several processing aspects of the wood welding procedure. A prototype wood welding machine, designed and fabricated from the ground up, was used to investigate the effects …

Nanofabrication Of Surface-Enhanced Raman Scattering Device By An Integrated Block-Copolymer And Nanoimprint Lithography Method, E. L. Yang, C. C. Liu, C. Y.P. Yang, P. F. Nealey, C. A. Steinhaus, Jack L. Skinner

Mechanical Engineering

The integration of block-copolymers and nanoimprint lithography presents a novel and cost-effective approach to achieving nanoscale patterning capabilities. The authors demonstrate the fabrication of a surface-enhanced Raman scattering device using templates created by the block-copolymers nanoimprint lithography integrated method.

Creating Tomorrow, Fall 2010, College Of Engineering

College of Engineering Magazines

Annual magazine of the College of Engineering at Utah State University.

Development And Characterization Of Shock Tubes For Laboratory Scale Blast Wave Simulation, Aaron D. Holmberg

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

The prevalence of traumatic brain injury (TBI) in American soldiers exposed to a blast wave has created an urgent need to better understand the effects of blast wave insult to the head. Developing techniques that can experimentally simulate well controlled blast waves in a laboratory environment is a critical component of the research efforts towards this goal. For this work, a 4-in. cylindrical uniform shock tube and a nonuniform shock tube combining a 4-in. cylindrical gas driver with a 9-in. square driven section have been developed. The hosting laboratory, gas handling system, multichannel data acquisition systems, and the related network …

The River Discontinuum: Applying Beaver Modifications To Baseline Conditions For Restoration Of Forested Headwaters, Denise Burchsted, Melinda Daniels, Robert Thorson, Jason Vokoun

Center for Integrative Geosciences

Billions of dollars are being spent in the United States to restore rivers to a desired, yet often unknown, reference condition. In lieu of a known reference, practitioners typically assume the paradigm of a connected watercourse. Geological and ecological processes, however, create patchy and discontinuous fluvial systems. One of these processes, dam building by North American beavers (Castor canadensis), generated discontinuities throughout precolonial river systems of northern North America. Under modern conditions, beaver dams create dynamic sequences of ponds and wet meadows among free-flowing segments. One beaver impoundment alone can exceed 1000 meters along the river, flood the valley laterally, …

Towards Optimal Placement Of Bio-Weapon Detectors, Chris Kiekintveld, Octavio Lerma

Departmental Technical Reports (CS)

Biological weapons are difficult and expensive to detect. Within a limited budget, we can afford a limited number of bio-weapon detector stations. It is therefore important to find the optimal locations for such stations. A natural idea is to place more detectors in the areas with more population -- and fewer in desert areas, with fewer people. However, such a commonsense analysis does not tell us how many detectors to place where. To decide on the exact placement of bio-weapon detectors, we formulate the placement problem in precise terms, and come up with an (almost) explicit solution to the resulting …

Nanocrystalline Piezoresistive Polysilicon Film Obtained By Aluminum Induced Crystallization For Pressure Sensing Applications, Suraj Kumar Patil

Material Science and Engineering Dissertations - Archive

The overall objective of our research was to integrate various sensors on to a single flexible substrate for multi-sensory information gathering. Additional capabilities could be incorporated towards the realization of 'smart skin' for simultaneous and real time sensing of various mechanical, biological and chemical stimuli. Recent research venues are dictated by the trend of shifting from conventional silicon (Si) substrates to lower weight, low profile, structurally robust and lower cost flexible substrates. These flexible substrates easily conform to non-planar objects, could be batch fabricated at lower cost and enable multilayer construction. This would eventually evolve into seamless assimilation of sensors …

A Comparative Study Of Diversity In Evolutionary Algorithms, Jayakanth Jayachandran, Steven Corns

Engineering Management and Systems Engineering Faculty Research & Creative Works

For many evolutionary algorithms a key obstacle to finding the global optima is insufficient solution diversity, causing the algorithm to become mired in a local optimum. Solution diversity can be influenced by algorithm parameters including population size, mutation operator and diversity preservation techniques. This study examines the combined effect of population size, mutation value and the geography imposed by the combinatorial graphs on a set of five standard evolutionary algorithm problems. a tradeoff can be seen between the initial diversity of the population size, introduction of new diversity from mutation, and the preservation of diversity from combinatorial graph. with an …

The Gel Documentation System: A Cornerstone To The Implementation Of The Introduction To Biotechnology And Introduction To Bioinformatics Cross-Disciplinary Course Series (Final Report), Marcy Kelly, Gregory Lampard, Constance Knapp

Cornerstone 3 Reports : Interdisciplinary Informatics

Our original goal was to offer Pace undergraduate students opportunities to be introduced to both Biotechnology and Computer Science as it relates to Bioinformatics. We proposed a two course series, offered to both computer science and biology students that will increase both biological and computer science literacy of our students. The two courses are Introduction to Biotechnology (BIO 372) and Introduction to Bioinformatics.

Synthesis, Stabilization, And Characterization Of Metal Nanoparticles, Gregory White Ii

All Dissertations

Wet chemical synthesis techniques offer the ability to control various nanoparticle characteristics including size, shape, dispersibility in both aqueous and organic solvents, and tailored surface chemistries appropriate for different applications. Large quantities of stabilizing ligands or surfactants are often required during synthesis to achieve these nanoparticle characteristics. Unfortunately, excess reaction byproducts, surfactants, and ligands remaining in solution after nanoparticle synthesis can impede application, and therefore post-synthesis purification must be employed. A liquid-liquid solvent/anti-solvent pair (typically ethanol/toluene or ethanol/hexane for gold nanoparticles, GNPs) can be used to both purify and size-selectively fractionate hydrophobically modified nanoparticles. Alternatively, carbon dioxide may be used …

Modeling Of A Gyro-Stabilized Helicopter Camera System Using Neural Networks, Nicholas Joseph Layshot

Master's Theses

On-board gimbal systems for camera stabilization in helicopters are typically based on linear models. Such models, however, are inaccurate due to system nonlinearities and complexities. As an alternative approach, artificial neural networks can provide a more accurate model of the gimbal system based on their non-linear mapping and generalization capabilities.

This thesis investigates the applications of artificial neural networks to model the inertial characteristics (on the azimuth axis) of the inner gimbal in a gyro-stabilized multi-gimbal system. The neural network is trained with time-domain data obtained from gyro rate sensors of an actual camera system. The network performance is evaluated …

Characterization Of Acetogenic And Methanogenic Leachates Generated From A Sanitary Landfill Site, Aik Heng Lee, Hamid Nikraz, Yung Tse Hung

Civil and Environmental Engineering Faculty Publications

Decomposition processes take place in landfill generate leachates that can be categorized mainly of acetogenic and methanogenic in nature. BOD:COD ratio computed in this study for a landfill site over a 3 years duration revealed as a good indicator to identify acetogenic leachate from methanogenic leachate. Correlation relationships to predict pollutant level taking into consideration of climatic condition are derived.

The Effectiveness Of Silica Sand In Semi-Aerobic Stabilized Landfill Leachate Treatment, Ezlina Othman, Mohd Suffian Yusoff, Hamidi Abdul Aziz, Mohd Nordin Adlan, Mohammed J.K. Bashir, Yung Tse Hung

Civil and Environmental Engineering Faculty Publications

© 2010 by the authors. This study examines the suitability of natural silica sand as a low-cost adsorbent for the removal of ammoniacal nitrogen and heavy metals, particularly iron and zinc, from semi-aerobic stabilized landfill leachate. Leachate samples were collected from the Pulau Burung landfill site (PBLS) in Penang, Malaysia. The above-mentioned contaminants are highlighted in this study because of their unsafe concentrations at PBLS. The effects of shaking time, settling time, and silica sand dosage on the study parameter removal efficiencies were investigated to predict the performance of the process. The adsorptions of ammoniacal nitrogen, iron, and zinc were …

Doug Ruthven And Jorg Karger: Their Individual And Collective Contributions To The Field Of Zeolite Science And Engineering, Dhananjai B. Shah

Chemical & Biomedical Engineering Faculty Publications

Prof. Doug Ruthven and Prof. Jörg Kärger are two giants in the field of zeolite science and engineering. Over their academic careers encompassing almost forty years each, they have contributed significantly to the advancement of fundamental understanding of adsorption and diffusion in zeolites as well as their industrial applications. The author, in the beginning of his academic career, had an opportunity to spend two years as a post-doctoral fellow in Prof. Ruthven’s laboratory at the University of New Brunswick (1975–1977). This experience actually motivated me to spend my academic career in working in the field of zeolite adsorption and …

A Fiber Bragg Grating-Based All-Fiber Sensing Systems For Telerobotic Cutting Applications, Ginu Rajan, Dean Callaghan, Yuliya Semenova, Mark Mcgrath, Eugene Coyle, Gerald Farrell

Articles

A fiber Bragg grating (FBG)-based strain sensing system for minimally invasive telerobotic cutting applications is presented in this paper. Investigations assume that a scissor blade can be approximated as a uniformly tapered cantilever beam. A replica of the scissor blade is produced and strain characterization has been carried out using an FBG sensor system. Results are validated against measurements obtained using conventional electrical resistance strain gauges. The scissor blade experiences both direct and lateral forces during cutting, hence the system is characterized for a direct load range of 0-30 N and a lateral load range of 0-10 N. The results …

Generalized Ellipsometry On Sculptured Thin Films Made By Glancing Angle Deposition, Daniel Schmidt

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

In this thesis, physical properties of highly optically and magnetically anisotropic metal sculptured thin films made by glancing angle deposition are presented. Predominantly, the determination of optical and magneto-optical properties with spectroscopic generalized Mueller matrix ellipsometry and homogenization approaches is discussed. Nomenclatures are proposed to unambiguously identify the sculptured thin film geometry.

Generalized ellipsometry, a non-destructive optical characterization technique, is employed to determine geometrical structure and anisotropic dielectric properties of highly spatially coherent three-dimensionally nanostructured thin films in the spectral range from 400 to 1700 nm. The analysis of metal slanted columnar thin films (F1-STFs) deposited at glancing angle ( …

Hybrid Nanomanufacturing Process For High-Rate Polymer Nanofiber Production, Chad T. Peterson

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Nanotechnology and nanomaterials have the potential to revolutionize existing and create entirely new industries. Unique physical, mechanical, chemical, and biological properties of nanomaterials have been extensively documented in the last two decades. However, most nanomaterials are discontinuous in nature, creating problems with their processing and manipulation into devices and raising health concerns. Continuous nanofibers represent an emerging class of nanomaterials with critical advantages to applications. Continuous nanofibers are readily produced by electrospinning process comprising spinning polymer solutions in high electric fields. Electrospinning is a very economic top-down nanomanufacturing process that has been used to produce ultrafine continuous nanofibers from several …

Vena Cava As An Alternative To Pericardium In Bioprosthetic Percutaneous Heart Valves, Amy Munnelly

All Theses

Valve disease is a specialized form of cardiovascular disease that specifically affects the heart valves. Heart valves serve the vital function of maintaining unidirectional blood flow through the chambers of the heart during the cardiac cycle; however, as valve disease progresses, this function can become severely compromised [1]. Currently, the only cure for valve disease is to replace the defective valve with an engineered substitute. Each year, over 300,000 heart valve replacement surgeries are performed worldwide [2], and this number is expected to continue growing as life expectancies increase [3].
In the United States, the most common form of valve …