Digital Commons Network^™

Application Of Computer War Gaming In The Evaluation Of Missile Performance Requirements For Air To Air Engagements, Joy F. Berman

Retrospective Theses and Dissertations

No abstract provided.

Image Analysis And Improvement Of A Point Light Source Visual Flight Simulator, Steve K. Butrimas

Retrospective Theses and Dissertations

It has long been desired to simulate a non-preprogrammed controllable visual scene of the real world in a limited area for the purpose of training, in particular for aviation training. There presently exists a point light source projection system designed to accomplish this, however due to physical limitations, the display image, as compared to the corresponding real world scene which is being simulated, is somewhat distorted and limited. This point light source system is analyzed to determine the distortions and deviations from reality and methods are proposed to improve the display by minimizing the distortions and deviations.

An Analysis Of The Feasibility Of An Automatic Vehicle Locator System For The Orlando Police Department, Larry L. Lester

Retrospective Theses and Dissertations

No abstract provided.

Steady State Oscillations In Switching Regulated Dc To Dc Power Supplies, Jayant Gajanan Vaidya

Retrospective Theses and Dissertations

No abstract provided.

Slope Stability Of Overburden Spoil Dumps From Surface Phosphate Mines In Southeastern Idaho, Roland W. Jeppson, Robert W. Hill, C. Earl Israelsen

Reports

No abstract provided.

Statistical Modelling Of Computer Systems: A Survey, Amrit L. Goel, Anand M. Joglekar

Electrical Engineering and Computer Science - All Scholarship

This paper briefly surveys the data dependent statistical methods useful for computer systems modelling. The techniques are classified according to their applicability toward comparison, tuning and design of computer systems. A review of papers dealing with statistical modelling of computer systems is presented and a comprehensive bibliography is included to provide a useful source of reference toward the present and potential applications of statistical methods for computer system modelling.

Film Formation On Anodically Polarized Lead, H. Vaidyanathan, Ram A. Narasagoudar, Thomas J. O'Keefe, William Joseph James, James W. Johnson

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

A Predictive Model For Manpower Allocation In A Solid Waste System, Robert M. Anthony

Retrospective Theses and Dissertations

No abstract provided.

A Comparison Of N-Path And Digital Filters For Band Pass Applications, Stephen Cooperman

Retrospective Theses and Dissertations

The classic problem of achieving high Q, band pass, inductorless filters has been traditionally attacked by applying active RC networks. This approach suffers from the faults of poor economy, lack of stability of performance with time and temperature, and high network performance sensitivity to component changes. The problem is reviewed from the aspect of applying techniques other than operational amplifier RC filters. The techniques presented are those of N-Path (switching) and Digital Filters. The underlying theory of both methods is explored and a design example for each of the techniques is presented. These designs are then compared on the basis …

Development Of A Dme Simulator, Robert W. Brown

Retrospective Theses and Dissertations

This report summarizes the design of a DME (Distance Measuring Equipment) simulator to be used in the testing of an Area Navigation System. The purpose of the simulator is to generate a signal representing an aircraft's distance from a ground station. This information is in the form of two pulses whose separation represents that elapsed transmission time for an aircraft to receive a reply from the ground station to an interrogation by the aircraft. The pulse spacing must be selectable as fixed distances for static tests and as distance changing at a constant rate to simulate flying to or from …

A System Dynamics Model To Test Urban Transportation Policy Alternatives, John Paul Burtle

Retrospective Theses and Dissertations

This study investigates the structure of urban transportation systems, the bases of commuter mode selection, and the effects of alternate transportation system management policies. The study was based on the hypothesis that changes in transportation system management policies are possible which will significantly increase the demand for public transportation in urban areas.

A Solid State Transducer For Monitoring Pipeline Cathodic Protection Voltages, Jon Robert Bartell

Retrospective Theses and Dissertations

No abstract provided.

Fugitive Particulate From Highway Construction, Kennard F. Kosky

Retrospective Theses and Dissertations

National ambient air quality standards for particulate matter have been promulgated since April, 1971. While effects of stationary sources on these standards have been examined, little research has been accomplished on the effects of fugitive particulate. This thesis examines the environmental impact of a fugitive dust source, Highway Construction. Using the High-Volume reference method for particulate sampling, the effect of Highway construction was determined. An analysis of concentrations, distance influences, meteorological influences, particle sizes and construction influences is presented. The data obtained from this study indicates the major influence of concentrations is a function of distance and sampling height. Particle …

Electromagnetic Fields In Water Treatment, Robert H. Fagan

Retrospective Theses and Dissertations

Properties and characteristics of colloidal systems are reviewed with a discussion of colloid systems to be found in natural and wastewaters. Current electric and magnetic field theory are reviewed and summarized to provide practical application of the theory to engineering problems in the environmental field. Literature of colloidal reactions to electrical and magnetic fields is discussed and reviewed to ascertain areas of potential application of electric and magnetic phenomena to natural and wastewater treatment systems having objectionable colloid suspensions. It is concluded that application of electrical fields (electrophoresis) does not currently hold much promise for practical applications in water treatment …

System Dynamic Studies In Epidemiology (Deterministic), William Edward Lewis

Retrospective Theses and Dissertations

No abstract provided.

Dynamic Modeling With Discrete Management Decisions, Victor Jorge Sorondo

Retrospective Theses and Dissertations

No abstract provided.

The Effects Of Variations In The Excitation Parameters Of Blast Waves On The High Frequency Response Of Circular Rings, Paul John Mirabella

Retrospective Theses and Dissertations

The high frequency response of a circular ring of rectangular cross section interior to a conical shell excited by a blast wave is examined. The ring supports a rigidly attached mass during excitation. It is hypothesized that the response is a function of the four excitation parameters which characterize the loading. These are: peak reflected pressure; characteristic time (pulse duration); wave engulfment time; and circumferential distribution. These parameters are varied over a range of interest in an effort to ascertain the structural sensitivity to such perturbations. A series of tests sponsored by the Department of the Army and the Martin …

Osha's Impact On Industry, Paul Christ Noller

Retrospective Theses and Dissertations

On December 29, 1970, the President signed into law the Williams-Steiger Occupational Safety and Health Act (OSHA) of 1970, which became effective April 28, 1971. The purpose of this act is to assure safe and healthful working conditions for the nation's wage earners. The law provides that each employer has the basic duty to furnish his employees a place of employment which is safe from recognized hazards that cause death or serious physical harm. The implementation of the OSHA Act has been the most extensive intervention into the day-to-day operation of American Industry in history. Originally, employers expressed doubt that …

An Application Of Hamilton's Principle To Diffraction Of Light By Ultrasound, Daniel F. Waterhouse

Retrospective Theses and Dissertations

A covariant form of Hamilton's Principle of Stationary Action is formulated and used to solve the general eiconal equation describing the wave function of light in a medium carrying ultrasound. Tensor notation is reviewed and the tensor form of Maxwell's equations is developed. Boundary equation that the field quantities must satisfy in order for the variation of Hamilton's action integral to be stationary are determined and used to form the generalized eiconal equation of geometrical optics. The rays are introduced and through a canonical transformation the eiconal for the diffracted medium is solved and plotted.

A Simulation Study Of Guest Procedures In A Resort Hotel Complex, Bradley Barraclough

Retrospective Theses and Dissertations

At this time there is an increasing emphasis in Florida on developing large, multipurpose complexes which include shopping, entertainment, and accommodations for tourists. In all cases a major design problem is people transportation. For best efficiency the primary mode of transportation, the car, must be exchanged for other people movers within the complex, which will afford more security, flexibility, and better movement of people to their ultimate destination. Economically speaking, this would not only conserve fuel, but would allow consolidation of automobile parking into a less desirable area and the grouping of facilities for more shopping and recreation convenience. An …

Reduced Third Order Intermodulation Distortion Utilizing A Push-Pull Class C Vhf Transistorized Amplifier, Norman B. Mosher

Retrospective Theses and Dissertations

In a transistorized push-pull amplifier, third order intermodulation distortion was effectively reduced at VHF frequencies with an output power of two watt. The non-linear distortion of the amplifier is modeled using a power series. The resulting expression is used as the basis for choosing the push-pull configuration to reduce the third order intermodulation distortion. The amplifier was built and tested, and the experimental results compare favorably with the theoretical results. The level of the third order intermodulation distortion is found to be at least 30 dB below the interfering signal level.

Evaluative Study Of A Proposed Municipal Pyrolysis Installation, Leon Breckenridge

All Master's Theses

This paper discusses an alternative to sanitary landfills as a method of disposing of municipal solid waste. The alternative means is a pyrolysis-gasification process for the disposal of solid wastes and the production of energy in the form of a gas of relatively low energy content.

Characteristics of typical municipal solid wastes are discussed. A discussion of the pyrolysis process is included along with other pertinent technical information. A method for utilization of the energy produced from pyrolysis is presented.

2.5 Ampere Dc Solid State Power Controller, John Anthony Gilbert

Masters Theses

"The 2.5 Ampere DC Power Controller presented in this paper is a device which combines the properties of both relays and circuit breakers solely by means of solid state circuitry to perform the power functions that (1) provide DC power to electrical loads by means of power transistor switching, and (2) provide electrical protection by generating trip out characteristics similar to those of thermal circuit breakers. Furthermore, the control of this device is completely computer compatible, i.e., it is commandable from digital logic levels.

The text of this report discusses the requirements, specifications, and design of this power controller. In …

Air Breakdown In A Radial-Mode Focusing Element, Lee W. Casperson, Mohammad Shabbir Shekhani

Electrical and Computer Engineering Faculty Publications and Presentations

A new radial focusing device is described that condenses an incident laser beam to an extremely intense and uniformly illuminated focal spot. The focal region is useful for many applications. When used with a 10.6-µm CO₂ TEA laser source, a disk-shaped air-breakdown spark results, and the properties of this spark have been investigated.

Analysis Of A Portable, One Hundred Ampere Pulse Test Current Microhmmeter, John Marshall Allred

Retrospective Theses and Dissertations

This report is an analysis of the Model RT-2 Microhmmeter which is a portable apparatus using a pulse current power source in the measurement of load resistances in the microhm range. The need for accurately measuring resistances in the microhm range is quite real for testing electrical power circuit breaker contact resistance. Both during acceptance checking within the manufacturing process and in the field for preventative maintenance, contact resistance must be accurately determined. Before the invention of the Model RT-2 Micrometer, no device existed which could accurately measure resistances in the microhm range that was readily transported by an unaided …

Cost/Schedule Control Criteria For Selected Government Contracts, Robert Mcdowell Hammond

Retrospective Theses and Dissertations

This report presents and interprets the Cost/Schedule Control System Criteria, management techniques which have been determined by the Department of Defense to represent appropriate methods for adequately controlling program costs and schedules. Applied to selected contracts of significantly large dollar value, these standards provide for a system which affords the contractor the ability for effective program management and the customer sufficient output visibility for proper program progress evaluation. These criteria differ from typical management methods in that they include a means for assessing the value of completed work in terms of its planned cost. Comparing this with the planned cost …

Guide For Urban Transportation Planning Package, William R. Whidden

Retrospective Theses and Dissertations

No abstract provided.

Measurements Of Condensation Coefficient Exhibited By Water Drops Grown On Rural Cloud Nuclei, Abbas M. Sinnarwalla

Doctoral Dissertations

"Values of condensation coefficient, ß, were experimentally determined for water drops grown on cloud nuclei in atmospheric air samples. The measured quantities were supersaturation, final drop size (6 to 7.5 µm radius), and time to grow from near dry radius to final radius. The drops were grown in a vertical-flow thermal diffusion chamber, at supersaturations near 0.5 and 1.0%. The final drop sizes were large enough so that ß did not depend upon the size of the nucleus producing a given drop. The average value of ß was 0.025 with a standard deviation of about 0.01"--Abstract, page 2.

Hydrodynamic Mixing Model Applied To A Continuous Stirred-Tank Reactor With And Without Second-Order Reaction, Leon L. Otte

Doctoral Dissertations

Paper 1: "A hydrodynamic mixing (HDM) model, used to calculate the steady-state spatial distribution of conversion for a second-order reaction in a continuous stirred-tank reactor (CSTR) for non-premixed reactants was developed and contrasted with other methods. The HDM model is based on a segmental description of the reactor and includes turbulent mixing effects in each segment. As a test of the model, the experimental results obtained from a tubular reactor were found to be very well represented for a range of reactant ratios. Spatial distributions of concentration and segregation intensity (degree of mixing) within the CSTR were determined for a …

A Finite Element Method For Three-Dimensional Analysis Of Metal Forming, Nguyen Don Phu

Doctoral Dissertations

"The importance of metal forming by extrusion was reviewed. A Finite Element Approach was developed to analyze extrusion processes. A brick type linear element and the Upper Bound theorem were used to analyze the extrusion of a cylindrical billet into a square cross-section prism. A minimization technique for a non-linear functional with linear constraints was developed. Different types of boundary conditions were also formulated. A frictionless extrusion was simulated using the computer program developed. Velocity profiles at different sections of the deforming solid were obtained and an average extrusion pressure was predicted for a given area reduction ratio.

Extrusions from …