Digital Commons Network^™

Utilizing Diatoms In Wastewater Treatment For Pollutant Removal, Ceaira D. Howard

All Graduate Theses and Dissertations, Fall 2023 to Present

Wastewater treatment systems are increasingly challenged by a complex mix of pollutants including excess nutrients, organic dyes, and persistent chemicals like per- and polyfluoroalkyl substances (PFAS). Conventional treatment technologies often struggle to effectively and affordably remove these contaminants. This study explores the use of two diatom species, Phaeodactylum tricornutum and Navicula cryptocephala var. veneta, both single-celled microalgae with silica-based cell walls, as an environmentally sustainable approach to tertiary wastewater treatment. Diatoms offer dual functionality through surface adsorption properties and metabolic flexibilities, making them promising candidates for integrated treatment strategies.

To test the trophic flexibilities of diatoms, P. tricornutum was …

Evaluating Use Of Multiple Hydrologic Storage Indicators To Enhance Streamflow Forecasting, Reza Morovati

All Graduate Theses and Dissertations, Fall 2023 to Present

Accurate seasonal streamflow forecasts are essential for managing water resources in the western United States, where much of the water supply depends on snow accumulation and melt. Water managers, farmers, and communities rely on these forecasts to plan for water use, prepare for droughts, and protect the environment. However, traditional forecasting methods often do not fully use all the available information about how water is stored in the landscape, such as in snowpacks, soil moisture, and groundwater. This can limit the accuracy of predictions and make water management more difficult.

This study aimed to improve streamflow forecasts by explicitly including …

Enhancing Grid Integration Of High-Power Loads Through Modular Unfolding-Based Power Conversion With Decentralized Control, Sanat R. Poddar

All Graduate Theses and Dissertations, Fall 2023 to Present

The transition to electric vehicles (EVs) is a critical step toward reducing greenhouse gas emissions and creating a cleaner, more sustainable transportation sector. However, many drivers — particularly those operating larger vehicles such as trucks and buses — face significant challenges, including limited driving range and lengthy charging times. High-power, fast-charging stations, which can rapidly replenish EV batteries, are therefore essential for mitigating these barriers and making electric transportation practical across all vehicle classes.

Despite the promise of electric vehicles, deploying high-power fast-charging stations presents significant challenges. They require large amounts of electricity, making them expensive to install, operate, and …

Design, Control, And Optimization Of Unfolding-Based Ac-Dc Topologies With Three-Port Resonant Converters For Electric Vehicle Battery Charging Applications, Aditya Zade

All Graduate Theses and Dissertations, Fall 2023 to Present

The global effort to reduce greenhouse gas emissions and reliance on fossil fuels has made electric mobility a cornerstone of sustainable transportation. This transition is driving demand for advanced charging infrastructure and more efficient power conversion systems. Power converters play a central role, not only in enabling reliable EV charging but also in integrating renewable energy sources with the grid. Because of the large amount of power involved, these converters must operate efficiently, reliably, and at low cost. Conventional high-power chargers often use two stages of conversion, which are effective but limited by size and energy losses. To overcome these …

Unveiling The Interactions Between The Antibiotic Resistome And Microplastics Influenced By Trace Elements And Ppcps In Wastewater Treatment Plants, Tahira Tasneem Rahman

All Graduate Theses and Dissertations, Fall 2023 to Present

Antibiotic resistance is a growing global concern, and wastewater treatment plants play a critical role in controlling its spread. These facilities process water containing microplastics (small plastic particles), trace elements like copper and zinc, and chemicals from everyday products like pharmaceuticals and personal care products. Together, these pollutants may contribute to the survival and spread of bacteria containing antibiotic resistance genes, but their combined effects are not fully understood. This study investigated how these pollutants behave and interact in wastewater treatment plants using two approaches: direct monitoring of real treatment plants and controlled lab experiments using synthetic wastewater. Results showed …

Quicklime-Based Self-Healing Concrete For Bridge Deck Applications, Mehrnoosh Nazari

All Graduate Theses and Dissertations, Fall 2023 to Present

Concrete is one of the most widely used construction materials in the world. However, over time, it can crack and deteriorate, especially on roads and bridges exposed to harsh weather and deicing salts. Inspired by the long-lasting durability of ancient Roman concrete, this study explores the self-healing capabilities of concrete incorporating quicklime (calcium oxide) aggregates to extend the service life of bridge decks. For this purpose, three concrete mixtures were developed using local materials: one without quicklime (C-Q 0%) and two with 2% (C-Q 2%) and 4% quicklime (C-Q 4%). These mixtures were tested for fresh properties, strength, durability, and …

Developing Standardized Testing Datasets For Benchmarking Automated Quality Control Algorithm Performance With Aquatic Sensor Data, Ehsan Kahrizi

All Graduate Theses and Dissertations, Fall 2023 to Present

Advances in water monitoring technologies have led to a large increase in the amount of data collected from rivers, lakes, and other water systems. However, ensuring that these data are accurate and reliable remains a major challenge. Traditional data quality checks are done manually by a technician, which can be slow, inconsistent, and not practical for real-time monitoring. This research addresses these challenges by developing standardized datasets for testing computer-based methods that automatically detect and correct errors in water data. Using information from the Logan River Observatory in northern Utah, we created a step-by-step process to identify, categorize, and label …

Lace Network Firmware: A Polarfire Fpga Network For Data Routing And Command Interfacing In Space Applications, Kade C. Howes

All Graduate Theses and Dissertations, Fall 2023 to Present

Modern small spacecraft rely on powerful yet efficient onboard compute devices to process data from sensors in real-time due to tight power and volume constraints. This work explores a new compute device system built from PolarFire Field-Programmable Gate Arrays (FPGAs), which are power-efficient, reprogrammable chips well-suited for space applications. The system connects via a central controller FPGA with one or multiple companion processing FPGAs, allowing sensor data to be quickly received and shared across the network. Standardized data formats and interfaces increase compatibility with spacecraft computers. By simplifying data handling and using high-speed communication links, this architecture makes it easier …

Effective Transfer Of Tumor Annotations From Hematoxylin And Eosin To Fluorescence Images Of Breast And Lung Tissues, Tianling Niu, Emi Ampo, Julie M. Jorns, Mollie Patton, Tongtong Lu, Dong Hye Ye, Tina Yen, Bing Yu

Biomedical Engineering Faculty Research and Publications

Significance: Accurate transfer of annotations from histological images to fluorescence images is essential in developing deep learning (DL)-based optical imaging systems for intraoperative assessment of tumor margins. Manual annotation is time-consuming, prone to interobserver variability, and impractical for large-scale datasets.

Aim: We present a semi-automated method that can effectively transfer tumor annotations from pathologist-annotated hematoxylin and eosin (H&E) images to fluorescence images captured using microscopy with ultraviolet surface excitation (MUSE). This method is not intended for intraoperative use but rather to facilitate the creation of annotated datasets for DL model development.

Approach: Our semi-automated method consists of nonrigid image registration, …

Separating The Control Of Moving And Holding In Human Post-Stroke Arm Paresis, Alkis M. Hadjiosif, Kahori Kita, Scott T. Albert, Robert A. Scheidt, Reza Shadmehr, John W. Krakauer

Biomedical Engineering Faculty Research and Publications

Moving and holding-still (holding) have been posited to be separately controlled. The paretic arm after stroke exhibits different abnormalities during rest vs. movement, providing an opportunity to ask whether control of these behaviors is independently affected in stroke. We quantified resting postural abnormalities in human stroke patients by measuring their biases in force production as they held their hand still in various locations in a planar workspace and then assessed whether these resting force biases influenced reaching in the same workspace. Patients displayed marked resting force biases at each location, even when the arm was supported. However, these …

Theory And Technology Of Enhanced Coal Seam Gas Production By Integrated Drilling, Hydraulic Punching And Fracturing In Coal Mine: Part 2 Technology, Shiyao Yu, Xianbo Su, Jinxing Song, Qian Wang, Zhenjiang You

Research outputs 2022 to 2026

To enhance the efficiency and cost-effectiveness of coal seam gas extraction in coal mines, this study introduces an integrated approach combining drilling, hydraulic punching, and fracturing technologies. This method optimizes drilling media tailored to specific coal seams and fine-tunes technical parameters during drilling and permeability improvement processes. Furthermore, it clarifies the relationships among the coal breaking rate, discharge of drill cuttings, jet velocity, rotation speed, and displacement. This ensures precise and effective permeability improvement in both soft and hard coal formations. To implement this technology, a set of high-performance drilling tool with a large inner diameter, high pressure resistance, and …

Theory And Technology Of Enhanced Coal Seam Gas Production By Integrated Drilling, Punching And Fracturing In Coal Mine: Part 1 Theory, Shiyao Yu, Xianbo Su, Jinxing Song, Qian Wang, Zhenjiang You

Research outputs 2022 to 2026

Coal seams in China are typically characterized by high coal seam gas content and low permeability, posing challenges for efficient coal seam gas extraction. However, achieving successful boreholes, especially in soft coal formations, remains a challenge. The mechanisms underlying permeability improvement in different coal structures need further exploration. Therefore, this paper is focused on the fundamental principles of permeability improvement in soft coal through hydraulic punching, and in hard coal via hydraulic jet fracturing. Firstly, borehole instability results from a dynamic interplay of four factors: in situ stress, coal structure, mechanical properties of coal with fluid, and drilling technology. While …

Photocatalytic Performance Of N-Doped Ti3o5 Nano-Catalyst For Phenolic Compounds Removal From Industrial Wastewaters, Mehdi Narimani, Maryam Gonbadi, Mahsa Navabi, Fatemeh Khezri-Shooshtari, Amin Ale Ebrahim, Mohammad Mahdi Zerafat

Research outputs 2022 to 2026

This study is focused on the synthesis and evaluation of TiO2 and N-doped Ti3O5 for the photocatalytic degradation of phenol as a noxious substance commonly present in the industrial process effluents with harmful effects on human and the environment. The research addresses the critical environmental challenge posed by phenol-contaminated effluents from petrochemical industries. Leveraging Response Surface Methodology with Box-Behnken design, 17 experiments were conducted to analyze the impact of independent variables such as photo-catalyst dosage, pH, and irradiation time on degradation efficiency. Notably, the average crystallite sizes were determined as 20 nm for TiO2 and 58.3 nm for N-doped Ti3O5. …

Machine Learning Assisted Quality Control In Metal Additive Manufacturing: A Review, Zeqi Hu, Changlin Huang, Lechun Xie, Lin Hua, Yujie Yuan, Lai Chang Zhang

Research outputs 2022 to 2026

Additive manufacturing (AM) promotes the production of metallic parts with significant design flexibility, yet its use in critical applications is hindered by challenges in ensuring consistent quality and performance. Process variability often leads to defects, insufficient geometric accuracy and inadequate material properties, which are difficult to effectively manage due to limitations of traditional quality control methods in modeling high-dimensional nonlinear relationships and enabling adaptive control. Machine learning (ML) offers a transformative approach to model intricate process-structure-property relationships by leveraging the rich data environment of AM. The study presents a comprehensive examination of ML-driven quality assurance implementations in metallic AM. First, …

Cognitive Dynamics In Undergraduate Engineering Education: Effects Of Need For Cognitive Closure And Achievement Goal Orientation On Cognitive Engagement, Zain Ul Abideen

All Graduate Theses and Dissertations, Fall 2023 to Present

Cognitive and motivational factors play an important role in students’ engagement during problem-solving, which can lead to academic and professional success. Among these factors, Need for cognitive closure (NFCC) and achievement goal orientation (AGO) have been studied extensively individually, but their interaction and impact on engineering students’ problem-solving is still not explored. NFCC refers to the person’s desire for quick answers, and AGO is the student’s approach to learning and success. This research investigated the impact of NFCC on gender and engineering major, and the relation between NFCC (five facets) and AGO (Mastery, Performance) at their different levels. Additionally, this …

Enabling Scalable Camera-Based Streamflow Monitoring With Serverless Cloud Computing, Sajan Neupane

All Graduate Theses and Dissertations, Fall 2023 to Present

This thesis introduces a modern and automated method for monitoring rivers and streams using cameras and cloud-based software tools. Traditional monitoring methods often rely on sensors placed directly in the water, which can be expensive, hard to install, and difficult to maintain, especially in remote or rough terrain. In contrast, this approach uses cameras to observe water flow from a distance, offering a safer and more cost-effective alternative. However, camera systems come with their own challenges, such as collecting large amounts of image data, transferring it reliably from the field, and analyzing it quickly enough to be useful. This research …

Feasibility And Potential Of Electric Air Taxis For Long Distance Airport Access/Egress Trips, Atul Subedi

All Graduate Theses and Dissertations, Fall 2023 to Present

Getting to the airport is often one of the most stressful parts of a trip, especially for people who live far from the airport. In the United States, many travelers live more than an hour’s drive from a major airport, and their choices such as driving, using public transit, or paying for ride-hailing can be time-consuming, expensive, and inconvenient. A new technology, Electric Air Taxis (EATs), is being developed as a potential solution. These small, battery-powered aircraft could offer faster, cleaner, and more direct connections to airports. However, the success of EATs depends not only on the technology itself but …

A Human Factors Analysis And Classification System (Hfacs) Approach To Compare Cardiovascular, Orthopedics, Trauma Care, And Neurosurgery, Asfandyar Khan

Doctoral Dissertations and Master's Theses

Background: Despite significant progress in patient safety, human error continues to occur at high rates in procedural settings. Traditional safety models tend to focus on retrospective incident analysis, often overlooking the systemic conditions that allow errors to occur. The Human Factors Analysis and Classification System (HFACS) offers a proactive lens to understand how and where errors emerge and is useful for identifying active and latent failures.

Objective: To evaluate the utility and reliability of the Human Factors Analysis and Classification System (HFACS) in categorizing and comparing the pattern of frequencies (events) in cardiovascular, orthopedic, trauma care, and neurosurgical procedure.

Design, …

Thermal Management With Supercritical Carbon Dioxide Under Extreme Applications, Devon Hardy

Doctoral Dissertations and Master's Theses

A unique challenge in thermal system design is minimizing the power required to operate cooling systems while maintaining effective heat removal. Traditional cooling systems utilize single-phase fluids where the heat transfer mechanisms are well understood. To meet a variety of cooling demands, a range of technologies are available, including microchannel forced convection, jet impingement, porous media, nanofluids, pin fin arrays, and film cooling, each offering distinct advantages and limitations. While the performance of single- or two-phase cooling systems are generally predictable, in extreme thermal environments, new cooling solutions are needed to improve overall system efficiency and reliability.

Supercritical fluids, particularly …

Propeller Noise Prediction Of An Urban Air Mobility Vehicle In Urban Environment, Jie Hua

Doctoral Dissertations and Master's Theses

Urban Air Mobility (UAM) vehicles operate in complex, unsteady aerodynamic environments where wake interactions, gust and turbulence significantly affect both performance and noise generation. Understanding these mechanisms is critical for developing quieter and more efficient eVTOL systems that meet future community noise and certification requirements. This dissertation focuses on the high-fidelity numerical investigation of propeller noise in three representative unsteady loading scenarios: (i) transition (tilt) flight, (ii) edgewise inflow, and (iii) wake–propeller interaction. Each case emphasizes different physical mechanisms that dominate noise generation in UAM operations. Hybrid turbulence-resolving approaches—Detached Eddy Simulation (DES) and Delayed Detached Eddy Simulation (DDES)—are coupled with …

Integrating Neural Control And Finite Element Muscle Modeling: A Predictive Neuromusculoskeletal Framework For Investigating Neurodegenerative Disease, Colton Babcock

Boise State University Theses and Dissertations

Neurodegenerative diseases such as amyotrophic lateral sclerosis (ALS) disrupt the interplay between neural control and musculoskeletal function, leading to progressive motor decline and loss of force control and production. Traditional experimental and clinical approaches are limited in their ability to capture the multiscale, nonlinear mechanisms driving these impairments. This dissertation presents a novel predictive neuromusculoskeletal (NMS) modeling framework that integrates physiologically accurate motor neuron dynamics with three-dimensional finite element (FE) muscle models. Using subject-specific muscle geometry and fiber architecture of the tibialis anterior, the model simulates realistic force generation under both healthy and ALS-affected conditions. The neural component incorporates a …

Harnessing The Mechanical And Gelation Behavior Of Tyramine-Substituted Silk Fibroin Bioinks Through Integration Into A Modular And Low-Cost 3d Bioprinting Platform, Sourjjadeepta Biswas

Boise State University Theses and Dissertations

3D printing has become an indispensable tool in research labs across the globe. Yet, when it comes to bioprinting with custom or sensitive bioinks, accessible options remain limited. Commercial systems are often prohibitively expensive and restricted to proprietary materials, while DIY setups frequently lack the precision and compatibility needed for biologically relevant printing. Moreover, tunable bioinks that align with real-world biological constraints are still hard to come by. To address these gaps, we developed a modular, low-cost bioprinting platform tailored for tyramine-substituted silk fibroin (TA-SF) hydrogels-biocompatible materials known for their rapid gelation, tunable stiffness, and potential to support cell differentiation …

A Machine Learning Approach To Estimating Agricultural Return Flows: A Case Study Of The Twin Falls Canal Company In Idaho, Kendra Alise Figgins

Boise State University Theses and Dissertations

Idaho is the third largest water user in the United States due to its extensive agriculture industry (Murray, 2018). Irrigation has allowed farmers to take advantage of the warm climate and rich soils of the Eastern Snake River Plain to develop one of the nation’s most productive agricultural regions. This area now contains one-third of Idaho’s irrigated acres (Idaho Department of Water Resources, 2024). It also contains critical hydrologic connections between the Snake River and the Eastern Snake Plain Aquifer.

Farming practices in Idaho have gradually shifted over time. Warming temperatures and increased irrigation efficiency are allowing an expansion of …

Sustainability Assessment Of Ground Improvement Techniques: A Life Cycle Analysis Of Lime, Cement, Geopolymers And Biopolymers For Roadway Application, Jillian R. Frost

Boise State University Theses and Dissertations

Ground improvement design (GID) is a vital part of constructing safe, long-lasting infrastructure. Traditionally, this is done with a chemical additive such as lime or cement that is mixed with in-situ soil to improve soil parameters such as compressibility, and strength. These stabilizers produce high amounts of carbon emissions. As a response, engineers and researchers are beginning to develop new stabilization methods using biopolymers and geopolymers in hopes of achieving comparable soil stability results as well as reduced environmental impacts.

This thesis work integrates a life-cycle analysis (LCA) and life-cycle-cost-analysis (LCCA) framework to evaluate and compare four soil stabilizer types: …

Evaluation Of High Concentration Dissolved Oxygen Delivery On Wastewater Treatment Plant Performance, Gregor Ethan R. Posadas

Boise State University Theses and Dissertations

Microorganisms are used in wastewater treatment plants (WWTPs) to transform constituents and depend on dissolved oxygen (DO) for growth. Limitations in traditional treatment methods pose inefficiencies in performance relative to constituent removal. This study involved monitoring the performance of a selected WWTP located in Greenleaf, Idaho that was retrofitted with a high concentration DO delivery system. The WWTP was selected due to its small scale (classified as a minor discharge facility with a design flow <1 MGD) and capability of being retrofitted with a high concentration DO delivery system proprietary to BioSolution Holdings Co., Ltd. This study aimed to monitor the effects of delivering higher DO concentrations in the WWTP in conjunction with validating the performance and function of the retrofitted high concentration DO delivery system. The performance of the selected WWTP was monitored over the course of one year to capture seasonal fluctuations.

Significant changes in WWTP constituent treatment induced by higher DO concentrations were observed at various points within the treatment processes. Monitored parameters included DO, temperature, …

Stimulation And Recording Interfaces For Data Transmission To And From A Micro Neural Stimulation Device, Morgan Riley

Boise State University Theses and Dissertations

Advancements in neuromodulation for treating neurological disorders increasingly rely on selective peripheral nerve stimulation rather than whole-nerve activation. Traditional approaches engage all fascicles, causing off-target effects such as involuntary muscle contractions and pain. To address these challenges, this research proposes a minimally invasive microdevice that integrates wireless galvanic impulse communication with an epineural multi-contact nerve cuff. This design facilitates high-throughput, low-power stimulation, recording, and data transfer. Development efforts include optimizing neural stimulation protocols, validating deep tissue galvanic transmission, and fabricating a multi-channel nerve cuff for stable electrode–tissue interfacing. In parallel, custom depth-controlled intramuscular arrays enable high-density electromyography (EMG) recording during …

Biopolymer-Based Membranes And Their Application In Per- And Polyfluorinated Substances Removal: Perspective Review, Roham Ghanbari, Ratish Permala, Stefan Iglauer, Masoumeh Zargar

Research outputs 2022 to 2026

Over the past 2 decades, per- and polyfluoroalkyl substances (PFAS) have attracted considerable attention due to their widespread occurrence and adverse effects on both the environment and human health. PFAS possess strong carbon‑fluorine bonds that confer exceptional chemical stability and resistance to natural degradation; their fluorinated chains are highly hydrophobic and oleophobic, while their polar functional groups contribute to amphiphilic behavior and water solubility. Certain PFAS thus pose serious risks to living organisms, especially mammals. Membrane filtration is recognized as a particularly effective technique, achieving removal efficiencies greater than 99 % for long-chain-PFAS (including anionic, cationic, and zwitterionic PFAS molecules). …

Application Of Plastic Waste As A Sustainable Bitumen Mixture—A Review, Nuha S. Mashaan, Thakur Chamlagai

Research outputs 2022 to 2026

Plastic waste is growing rapidly, while asphalt binders remain heavily reliant on petroleum bitumen. Incorporating recycled plastics into bitumen can divert waste and enhance pavement performance. This review compiles 251 experimental records from 56 studies to evaluate how plastic type, dosage, and processing conditions affect softening point, penetration, and viscosity. Across studies, plastics (PET, LDPE/HDPE/LLDPE, PP, and hybrids) consistently stiffen binders, reducing penetration and increasing softening point and viscosity, thereby improving rutting resistance while potentially raising mixing/compaction demands. Using grouped cross-validated machine-learning models (median baseline, ridge, random forest, XGBoost), we quantify the predictability of binder properties and show that nonlinear …

Development Of A Handy Tool For The Selection Of Urban Stormwater Best Management Practices, Aaron T. Kenny

Civil & Environmental Engineering Theses & Dissertations

The City of Norfolk, Virginia faces substantial stormwater management challenges due to shallow groundwater, tidal influence, dense urban development, and limited right-of-way. These constraints limit the applicability of many Best Management Practices (BMPs) and require the early identification of feasible practices before detailed hydrologic modeling. This thesis introduces a decision-support tool that quickly and systematically identifies and prioritizes BMPs that are both feasible and well-suited to Norfolk’s Municipal Separate Storm Sewer System (MS4) program, streamlining early-stage selection and saving time and resources.

The tool implements a two-stage methodology. First, feasibility gates are applied using catalog attributes derived from the Virginia …

Component Model Development Of Heat Exchangers, Expanders, And Control Valves For Autonomous Cryogenics Plant Cool-Down, William Harris Buhrig Iv

Mechanical & Aerospace Engineering Theses & Dissertations

The traditional method of cryogenic plant cool-down involves having continuous on-call staff to head into the office at any time to modify the existing multi-layered PID control systems if the on-call staff member detects a significant deviation from the cool-down plan. This thesis aims to outline an effective method for modeling the structure of systems with performance characteristics that deviate from design requirements and from ideal inlet-outlet correspondence, enabling the adjustment and modification of existing control structures across all Thomas Jefferson National Accelerator Facility (JLab) cryogenic refrigeration plants. Analytical Modeling and Gaussian Process Regression (GPR) are applied to model the …