Digital Commons Network^™

Test 196: Cletrac Model 15, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 197: Minneapolis- Moline Universal Model Mt, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 194: Mccormick Deering Industrial Model 20, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 189: Allis-Chalmers "All Crop", Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 190: John Deere Gp, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere GP

TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear.

This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated.

BELT HORSEPOWER TESTS

TEST …

Test 187: Bates Steel Mule Model 45, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 192: Bradley "General Purpose", Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 193: Allis Chalmers Model Ek, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 198: Mccormick-Deering Farmall "F-30", Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 199: Mccormick-Deering "Tractractor", Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Disintegration Of Green Missouri Fire Clay Bodies At Low Temperatures, Wilbur Brooks Schofield

Bachelors Theses

"Several years ago in the Ceramics Lab. of the Missouri School of Mines some A. P. Green Ozark Clay test pieces were left in a drier for a period of about seven months at a constant temperature of 110C. At the end of this period it was noticed that these specimens had disintegrated and crumpled down to a powdered mass. The object of this experiment was to repeat the former test and see if the clay would disintegrate and if so why. We also wished to find if by drying at higher temperatures for a shorter length of time would …

Size And Shape Of Clay Grains As Affected By Various Methods Of Grinding, Henry William Meyer

Bachelors Theses

"It is a common belief among those persons manufacturing dry pressed brick that the shape of grain of the clay used for this purpose would materially affect the physical properties of the resultant product. Some believe that clays, dry pan-ground, give a better product than clays disintegrated mechanically or passed through rolls. In some recent dry press investigations it was found that some milling methods gave an advantage over other methods, in the matter of pressure transmission. Due to this, a possible cause for the advantage was attributed to the shape of the grains resulting from the various methods of …

The Transmission Of Pressure In The Dry Pressing Of Typical Building Brick And Fire Brick Mixes As Affected By The Variation In Grog Size, Henry Rickel Herron

Bachelors Theses

"In the formation of dry pressed ware, the transmission of pressure is of vital importance to the quality and character of the finished product as regards the resistance to spalling, load at high temperatures, slag action, abrasion and other physical properties. Furthermore, the transmission of pressure is a limiting factor as regards the size and irregularity of shape of a product manufactured by the dry press process"--Introduction, page 1.

Technical Methods Of Analysis For Mill Products, Daniel Elijah Huffman

Professional Degree Theses

"In mining and milling operations it is necessary that the assays be known as soon as possible, also that these results are more accurate than the sampling or the operation that produced the samples. This means that both speed and accuracy must be considered when selecting a method for the analysis of samples"--Technical Methods of Analysis, page 1.

Chemical Control -- Influence On Manufacture And Quality Of Cement, Joseph Owen Hunt

Professional Degree Theses

"Definition:- Portland cement may be defined as the product obtained by finely pulverizing clinker produced by calcining to incipient fusion an intimate and properly proportioned mixture of argillaceous and calcareous materials with no additions subsequent to calcination excepting water and calcined or uncalcined gypsum. While a review of Portland cement analysis would show a wide variation in chemical composition, it must not be supposed that such latitude in proportioning the raw material really exists. If the resulting Portland cement is to be sound, normal setting, and of good strength it is imperative that the raw materials shall be correctly proportioned …

Memorandum: Current Recording And Reporting Of Mortality And Salvage Data, Buildings, C.B. Central Office Equipment, Multiple Private Branch Exchanges, Wilbur Elihu Sheldon

Professional Degree Theses

"The purpose of this memorandum is to describe the methods and forms to be used in recording currently and reporting annually actual additions and retirements of Buildings, Common Battery Central Office Telephone Equipment, and Multiple Private Branch Exchanges, together with the making of certain periodic estimates of future additions and retirements, final dates of retirement, and probable net salvage at final retirement. All of these data are used in connection with the determination of depreciation rates for the classes of plant mentioned"--Section I. General, page 4.

Gas Analysis By Measurement Of The Thermal Conductivity, Bertie Lee Browning

Professional Degree Theses

"Types of gas analysis. Methods for the analysis of gases may be divided into two general classes, physical and chemical. In chemical methods, a constituent of the gas mixture undergoes chemical reaction and the amount of the constituent is determined by change in volume or by supplementary chemical methods such as titration. The physical methods of analysis differ in that no chemical change takes place in the gas. Instead, a determination is made of some physical property which is related to the composition of the gas mixture. Some of the physical properties which have been used for purposes of analysis …

Pressure Transmission In Clays Affected By Time Of Pressure Application, Robert Edward Lee

Bachelors Theses

"Experienced dry-press operators have long known that when they slow down their presses, to the proper speed they are able to exert more pressure on a wetter mix with out pressure cracks becoming apparent. When a clay mix is compressed in a dry-press there is a gradation of the pressure exerted, from the rams to the center, causing in some cases a soft centered brick. "Shelly brick", are undersirable sic because they do not have uniform physical properties through out. This weakens their structure, due to unequal stresses developed in drying and fireing sic. The defective structure of dry-pressed brick …

The Effect Of Small Amounts Of Chrome Ore On Dry Press Diaspore Refractories, Allen John Reid

Bachelors Theses

"The term "Diaspore" as used in this paper will be used to mean the diaspore clay from which refractory bodies are made. The pure mineral Diaspore (Al₂O₃ . H₂O) has an Al₂O₃ content of 85%, while the best grades of diaspore clay run from 76% to 79% diaspore. Diaspore clay consists of a varying percentage of diaspore, ranging from 60% to 79%, and the remaining percentage as clay. The most objectionable impurities which occure sic in diaspore clay are alkalies. The chief source of diaspore is the central part of Missouri. It occurs in pot hole formations accompanied by "flint" …

The Transmission Of Pressure In The Dry Pressing Of Typical Building Brick And Fire Brick Mixes As Affected By The Variation In Grog Size, Stanley John Tompach

Bachelors Theses

"In the formation of dry pressed ware, the transmission of pressure is of vital importance to the quality and character of the finished product as regards the resistance to spalling, load at high temperatures, slag action, abrasion and other physical properties. Furthermore, the transmission of pressure is a limiting factor as regards the size and irregularity of shape of a product manufactured by the dry press process. Prior to the time of this investigation several companies have succeeded in producing ware up to six (6) inches in depth; but an increase over six inches has resulted, in every case, in …

Electrodeposition Of Rubber Upon An Electrode By Means Of A Direct Current Of Electricity, L. F. Novotny

Bachelors’ Theses

The rubber industry may be said to be one of the most speedily developed industries in the world. This is due to a great extent to the fact that the first real interest in rubber as a material of commerce came in the advent of the automobile. It was in 1888 that an Irish horse doctor, John Boyd Dunlop, conceived the idea of tying a rubber tube around the wheels of his little son's velocipede. Within seven years of this event, a $25,000,000 corporation was manufacturing Dunlop tires.

Something may also be said here of the man who took the …

Economic And Engineering Study For The Rehabilitation Of An Obsolete Factory Area, William E. O'Brien

Bachelors’ Theses

The first example of City Planning in America was the laying out of the National Capital by the French Engineer L’Enfant. The next attempt at grouping of buildings extends .back at least to the World's Fair in Chicago. Following this, contributions to¬ ward better and broader planning were made by an organized group of architects, engineers, and landscape architects. This was followed by studies of better housing facilities, the forming of the Outdoor Art Association and the American League for Civic Improvements, both of which were later merged into the American Civic Association.

A Study Of The Iodine Content Of Missouri Vegetables And Soils, Charles Jackson Potter

Masters Theses

"Investigations have shown that the iodine content of vegetables, water, and soils has a direct relationship to the goiter incidence of a given region. A few countries, notably New Zealand and Switzerland have made a rather complete survey. In the United States, South Carolina has made the most progress in this direction.

At the present time there are no available records of vegetable and soil analysis for iodine in Missouri. Hunze determined the amount of iodine in waters in Missouri. The connection of his results with the author's results will be seen later.

The present investigation was carried out at …

Test 182: Cletrac Model 80-60, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 176: Oliver Hart-Parr Row Crop, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 180: Oliver Hart-Parr 18-28, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 175: Twin City Model Kt 11-20, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 179: Monarch Model 50, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 177: Massey-Harris (General Purpose), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

The Solubilities Of Alkali Chlorides And Sulfates In Anhydrous Alcohols, Emmet Rudolph Kirn

Masters Theses

"A search of the literature for data on the solubilities of inorganic salts in various anhydrous alcohols will show that comparatively little work has been recorded. Most of the work has been done on salts in aqueous normal alcohols and practically all of this data concerns only methyl and ethyl alcohols. This information shows a wide divergence in results with different workers. Perhaps these differences in data may be attributed to an error in that the alcohols may not have been absolutely anhydrous, for even small traces of water greatly affect the solubility of the salts. Again, the methods of …