Digital Commons Network^™

Test 325: Cletrac Model Bd, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 323: Cletrac General Model Gg, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 326: Cletrac Model Fd, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 329: Mccormick-Deering Farmall A (Gasoline), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 333: Farmall H Gasoline, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: Farmall H Gasoline

TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear.

This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated.

BELT HORSEPOWER TESTS

TEST …

Test 334: Farmall H Distillate , Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: Farmall H Distillate

TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear.

This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated.

BELT HORSEPOWER TESTS

TEST …

Test 320: Caterpiller Model R-2 (Gasoline), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 338: Allis-Chalmers Model L, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

A Process For Making Refractory Insulating Brick, Albert Lloyd Tetley

Bachelors Theses

"The object of this study was to investigate the fundamental principles of producing an insulating brick by making the pore structure of air bubbles entrapped in a clay slip. Since a clay water mixture or any material containing entrapped air will loose this air when placed under vacuum, it is thought that placing the clay slips under a pressure would cause a considerable pore structure in the slip when the pressure is released. In the common method of making insulting brick, the fired brick must be ground to size as they cannot be molded to a definite size and shape. …

Organization Of Geophysical Parties For Foreign Exploration, Charles Howard Dresbach

Professional Degree Theses

"Special conditions encountered in much foreign work make it necessary to consider many factors which are not encountered in domestic programs of geophysical exploration for oil. Although extremely difficult working conditions are frequently met in domestic operations by company and contract crews, the large store of past experience, the availability of fresh supplies, replacement or new equipment, and the proximity of the helpful home office make their surmountal more or less a matter of routine. Contrariwise, foreign operations are frequently conducted under much more difficult conditions, supplies and equipment can be secured only after long and costly delays, and the …

Some Effects Of Geology On The Relation Between Rainfall And Run-Off, James Smythe Reger

Professional Degree Theses

"For the past five years, the writer has been engaged either directly or indirectly in the investigation of water supplies. Studies and observations made in Texas, Oklahoma, Colorado, and New Mexico, have brought to his attention the importance of geology to hydrology. This is especially true in reference to the relation between rainfall and run-off. In all texts and other publications relating to hydrology, the importance of geology to the subject is hardly more than mentioned. In the absence of actual stream flow records, many engineers resort to either the "direct comparative method", or the "rainfall percentage method", in estimating …

An Investigation Of Methods For Quantitative Spectrographic Analysis., Frederick Bertram Johnston

Electronic Theses and Dissertations

No abstract provided.

Correlation Of Cooling Data For Kerosene., James Franklyn Scott

Electronic Theses and Dissertations

No abstract provided.

Newark Engineering Notes, Volume 2, No. 3, December 1938, Newark College Of Engineering

Newark Engineering Notes

A journal by the administration, faculty and alumni of the Newark College of Engineering.

This issue includes:
The President's Diary
"Duplicating the Cube by Rule and Compass" by James H. Fithian
Additions to Electrical Laboratory Equipment
Additions to Mechanical Laboratory Equipment
Alumni Professionalities
"Developing Laboratory Experiments in Physics" by William Hazell
"Shop Surveying" by William S. La Londe
"The Design of Reinforced Concrete Beams Using the Method of 'Controlled Concrete'" by Odd Albert
What Our Readers Say
Is the Dean In?
Evolution of the Electrical Courses
From the Mail Bag
The Student Engineering Societies

Newark Engineering Notes, Volume 2, No. 2, November 1938, Newark College Of Engineering

Newark Engineering Notes

A journal by the administration, faculty and alumni of the Newark College of Engineering.

This issue includes:
The President's Diary
"Designing the Rim Under Gear Teeth" by Waldemar F. Larsen
"Evolution of the Electrical Courses" by James C. Peet
Registrar's Report
Alumni Personalities
"A Graphical Representation of the a-Operator" by S. Fishman
"The Gyuris Storage Battery" by V. T. Stewart
"Introduction to Engineering Physics" book review by Eastman Smith
Student Engineering Societies

Newark Engineering Notes, Volume 2, No. 1, October 1938, Newark College Of Engineering

Newark Engineering Notes

A journal by the administration, faculty and alumni of the Newark College of Engineering.

This issue includes:
The President's Diary "Is the Dean In?" by James A. Bradley
American Society of Civil Engineers
American Society of Mechanical Engineers
American Institute of Electrical Engineers
American Institute of Chemical Engineers
"Motion of a Chain Within a Smooth Fixed Tube" by Bedross Koshkarian
"College Guidance for Engineers" by Robert Widdop
Changes in the Staff at the Newark College of Engineering
Alumni Personalities
Features to Come
What Our Readers Say
Professor Joffee's Integral
Portable Vibration Instruments
From the Mail Bag
Opportunities Utilized

Newark Engineering Notes, Volume 1, No. 3, June 1938, Newark College Of Engineering

Newark Engineering Notes

A journal by the administration, faculty and alumni of the Newark College of Engineering.

This issue includes:
The President's Diary
"Economic Growth" by George D. Wilkinson, Jr.
"Solution Of Simultaneous Linear Equations by Successive Approximations" by William S. La Londe, Jr.
What Our Professors and Instructors Are Doing
Evaluation of an Elliptic Integral
Convention In Texas
Proposed Evening Course In Time And Motion Study
"Graduate Work Ln Geodetic Surveying" by James M. Robbins
Next Issue of Newark Engineering Notes
What Our Readers Say
The "Easy Formulas"
From The Mail Bag

Organic Ion-Exchange Materials, Harry Burrell

Theses

This thesis is offered as partial fulfilment for the degree of Chemical Engineer at the Newark College of Engineering. It covers a very new subject - one which has been rather intensively developed by several investigators during the past three years. The writer has had the fortunate opportunity of working on organic ion-exchange materials at the Ellis-Foster Co., which kindly gave permission through Mr. Carleton Ellis for the publication of experimental results. Many thanks are due to Dr. Frank B. Root, the laboratory director, whose gracious, constructive criticisms aided the writer in all phases of the work.

An attempt has …

Study And Correlation Of Belt And Cambrian Arkoses Near Limespur, Montana, Ryan C. Mcnamee

Bachelors Theses and Reports, 1928 - 1970

In the vicinity of Limespur, Montana, a siding along the Northern Pacific Railroad near Whitehall, Montana, occurs a characteristic type of arkose where­ in many small red mineral grains are distributed throughout the rock mass. It is in this respect that this arkose differs from other arkoses in the surrounding region.

A Study On The Origin Of Banded Agate, James E. Driscoll

Bachelors Theses and Reports, 1928 - 1970

Agate in any of its varieties presents numerous problems in regard to its origin. Many types have been described and their beauty elaborated upon, but little has been written concerning their formation and the problems involved. The genesis of agate implicates an amazing complexity of physical and colloid­al chemistry, as well as, various principles of geology.

Underground Stratigraphy Of Montana, Virgil R. Chamberlain

Bachelors Theses and Reports, 1928 - 1970

The purpose of this thesis is to study the subsurface stratigraphy of the state of Montana from information acquired from well logs, composite logs, and measured sections. Underground stratigraphy is important for the intelligent prospecting for oil, gas, or water. A knowledge of the strata beneath us can be gathered only by measurements of numerous outcrops or by deep drilling with careful sampling or logging of the formations passed through.

The Jefferson Canyon Gypsum Deposit., Arthur Talpt

Bachelors Theses and Reports, 1928 - 1970

Gypsum deposits are widespread geographically and are in many geo­logic formations. Ordinarily their character and origin, for the most part sedimentary, are not difficult to ascertain. Near Lewis and Clark Caverns, east of Whitehall, Montana, occurs a deposit of gypsum unique in many re­spects.

Newark Engineering Notes, Volume 1, No. 2, May 1938, Newark College Of Engineering

Newark Engineering Notes

A journal by the administration, faculty and alumni of the Newark College of Engineering.

This issue includes:
The President's Diary
"Organolites: Organic Base-Exchange Material" by Harry Burrell
"A High Speed Electronic Circuit Breaker" by Henry Jasik
"First Prize to Henry Jasik at Student Convention" by Mildred Preen
"The 'Easy Formulas' In Reinforced Concrete Design" by Odd Albert
Alumni Personalities
What Our Readers Say
Professor Joffe's Integral
Portable Vibration Instruments
From The Mail Bag
A Message From The Editors

Age Hardening Of Silver-Platinum Alloys, Robert A. Wilson

Bachelors Theses and Reports, 1928 - 1970

The alloy system selected for study was the binary alloy of platinum and silver. An examination of the various silver alloy diagrams revealed that of several possible alloys, the silver platinum was the most suit­able with regard to solubility.

Alkali Leaching Of Antimony Sulphide And Electrolytic Recovery Of Antimony From The Resulting Leach Solution, Vincent J. Andrews

Bachelors Theses and Reports, 1928 - 1970

It is the purpose of this investigation to obtain some insight into optimum conditions for leaching Stib­nite with sodium hydroxide solution and also to steady the factors affecting the electrolysis of the resulting solution.

Electrolytic Recovery Of Copper And Zinc From Brass., V. Kent Loughran

Bachelors Theses and Reports, 1928 - 1970

The reclamation of metals from scrap is becoming increasingly important in the metallurgical industry. Copper, because it does not corrode readily and is electronegative to most common metals, is peculiarly adapted to reclamation.

Magnesium - Tellurium By Powder Methods, George Gale

Bachelors Theses and Reports, 1928 - 1970

Today considerable work is being done in the compressed metal powder field which is gradually ob­taining prominence as a valuable branch of metallurgy. The mass of data, however, has led to many different ideas on the results of sintering.

Geology And Ore Deposits Of The Golden Messenger Mine, Lewis And Clark County, Helena, Montana., John C. Archibald Jr.

Bachelors Theses and Reports, 1928 - 1970

The Golden Messenger Mine which is approximately twenty-three miles northeast of Helena, Montana, near York, on Trout Creek, has long presented several problems of both theoretical and practical interest.

The Geology And Ore Deposits Of Jardine, Montana, Wolter Duykers

Bachelors Theses and Reports, 1928 - 1970

The subject to be covered by this paper is based upon field study made during a six week stay at Jardine. The work began on June 19, 1937 and ended on July 31 of the same year.

A Rapid Determination Of Small Amounts Of Lead In Zinc, George T. Hanson

Bachelors Theses and Reports, 1928 - 1970

This investigation, carried on in the metallur­gical laboratories at the Montana School of Mines, was undertaken with the desire to work out a rapid method for the estimation, or the determination, of the amount of lead in zinc.