Digital Commons Network^™

Test 359: Massey-Harris Model 101r Junior, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 360: Allis-Chalmers Model Hd-7w (Wide Tread), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 361: Allis-Chalmers Model Wd-10w (Wide Tread), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 357: Caterpiller Model D-8 (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 362: Allis-Chalmers Model Hd-14, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 350: John Deere D, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere D TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST …

Advertising Brochure: Minneapolis Moline Anniversary, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Advertising Brochure: International Harvester Td-6 Crawler, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 351:Oliver Row-Crop 70 Hc, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 342: Mccormick-Deering Model W-4, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 343: International Tractractor Model Td-14 (Wide Tread), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 347: International Tractractor Model T-6 (Wide Tread) (Distillate), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 353: Mccormick-Deering Model W-4 (Gasoline), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 355: Mccormick-Deering Model W-6 (Gasoline), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 260: Allis-Chalmers Model Hd-7w (Wide Tread), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 363: Allis-Chalmers Model C (Distillate), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 350: John Deere D, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere D

TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear.

This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated.

BELT HORSEPOWER TESTS

TEST …

Absorption Of Carbon Dioxide In A Bubble Plate Tower, William Arthur Enderson

Masters Theses

"Gas absorption, one of the chief operations of chemical engineering, has occupied investigators for a long time. Results of many experiments on the general subject of gas absorption has been published. However, relatively few data have appeared in the literature on the use of bubble cap towers for gas absorption although they constitute one of the three major classifications of absorption equipment. Bubble cap towers are used extensively in the petroleum industry. More performance data would increase the versatility of existing equipment"--Introduction, page 1.

The Application Of Fluid Level Measurements To Oil Wells In Kansas, Charles Calvert Rodd

Professional Degree Theses

"The mechanics of determining fluid levels and a knowledge of the depth-to-fluid in a well are matters of general interest. To the oil-producer, however, such information is of value only as it may affect the operation of a well or reservoir"--Uses of Fluid-Level Measurements, page 9.

The Clark National Forest Of Missouri, Walter A. Werner

Professional Degree Theses

"The question might logically arise as to the appropriateness of a thesis with a forestry title being submitted for an engineering degree. The writer has been connected with the United States Forest Service for the past four years in an advisory capacity on staff of the Forest Supervisor of the Clark National Forest, during which time he has found that the engineers and construction men have performed a major function in the development of the forest.

As the initial development consisting of lineal surveys, construction of roads and telephone lines, erection of fire lookout towers, planning and erection of ranger …

X-Ray Data Concerning Some Manganese-Copper Alloys, George Lester Mitsch

Bachelors Theses

"Until recently the only commercial method of producing metallic manganese in large ammounts sic was a pyrometallurgical process. Producing a metal of about 97% purity, it was not very satisfactory. With the advent of a process for producing a metal of 99.9 plus % purity electrolytically, introduced by the United States Bureau of Mines, for the first time was there a sufficient quantity of pure manganese available for alloy use. The manganese-copper system was chosen for study because of the inconsistencies in the reports of previous investigators, and because of the properties alloys of these components possess, such as magnetism, …

Report Of Cooperative Investigation Of Joint Spacing In Concrete Pavements, Louis Campbell

Kentucky Transportation Center Research Report

In order to aid in a final determination of a rational, economical, and practical jointing method for concrete pavement, and to obtain factual data for future construction, the Kentucky Department of Highway built 6.27 miles of experimental pavement during the summer of 1940. This project was one of those planned by the Public Roads Administration and the Portland Cement Association in cooperation with the various states.

The Vapor Phase Oxidation Of A Benzene Solution Of Phenanthrene, Using Soluble Catalysts., Carey William Brackin

Electronic Theses and Dissertations

No abstract provided.

The Effect Of Addition Agents In Grinding Portland Cement Clinker, Eugene Farrell Hill

Masters Theses

"In the dry grinding of most materials in a ball mill or similar apparatus, a degree of fineness is eventually reached when a noticeable decrease in the efficiency of grinding occurs. The degree of fineness where this phenomenon occurs, as measured by the specific surface of the material being ground, varies greatly with different materials. The accompanying effect in all cases, however, is the formation of a coating upon the balls; this coating in the case of cement adheres tightly to the balls and increases in thickness as grinding progresses after the initial "coating' fineness has been reached. Usually an …

Newark Engineering Notes, Volume 3, No. 2, December, 1939, Newark College Of Engineering

Newark Engineering Notes

A journal by the administration, faculty and alumni of the Newark College of Engineering. This issue includes: "The President's Diary" by Allan R. Cullimore "Council on Public Relations" by Charles J. Kiernan "George Erle Beggs" by H. N. Cummings "Background for War" by Ruth Littig "Repulsion Motor Calculations" by Paul C. Shedd "Eccentric Welded Connections" by Odd Albert "Cellophane" by Donald A. Waterfield "The Industrial Relations Department" "Weston Light Machines by Beatrice A. Hickstein "The Student Engineering Societies" "What Our Readers Say" "Fast Reading Stadia Rod" by Professor William S. La Londe

Newark Engineering Notes, Volume 3, No. 1, October, 1939, Newark College Of Engineering

Newark Engineering Notes

A journal by the administration, faculty and alumni of the Newark College of Engineering. This issue includes: "The President's Diary" by Allan R. Cullimore "Some Problems in Moisture Measurement" by William B. Wible "We Cast Out 9's, or 3's" by Elmer C. Easton "Impressions of a New Employee" by Herbert Erdman "The Faculty" "Isotopes as a Tool in Chemical Research" by Joseph Joffe "Employment Among 1939 Graduates" "Changes in the Staff at Newark College of Engineering" "Civillian Pilot Training Course" "Registrar's Report" by Paul L. Cambreleng "The Student Engineering Societies" "Student Interest and Hobbies" by Seymour Feder "What Our Professors …

Montana Oil Fields, Conrad F. Lundgren

Bachelors Theses and Reports, 1928 - 1970

Since the discovery of oil in Montana in1916, the petroleum industry has advanced to a point where over 5,000,000 barrels of oil worthover $6,500,000 has been produced in each of the three past years (1936, 1937, and 1938).

Newark Engineering Notes, Volume 2, No. 6, May 1939, Newark College Of Engineering

Newark Engineering Notes

A journal by the administration, faculty and alumni of the Newark College of Engineering.

This issue includes:
The President's Diary
"The In-and-Out Reservoir Problem" by H. N. Cummings and B. S. Koshkarian
"Scientific Management in the Small Business" by J. Ansel Brooks
Technical Article
"The Alternating-Current Network Analyzer of the Public Service Electric and Gas Company" by Hollis K. Sels and Raymond C. R. Schulze
What Our Professors are Doing
"Mechanically Minded" by Frank N. Entwisle
The Student Chapter of the American Institute of Chemical Engineers
"A.I.E.E. Holds Thirteenth Annual Convention" by Elliot Godman
The Fixed Point Theory
Professionalities
"The …

The Age Hardening Of Silver With Copper-Silicide, Joseph Edward Shaw

Bachelors Theses and Reports, 1928 - 1970

The successful application of the phenomenon of pre­cipitation hardening to aluminum and copper has indicated the possibility of hardening all metals in the same way. The phenomenon of age hardening was discoveredin 1911, and since that time much research has been car­ried on in all parts of the world on various alloy sys­tems.

Structure Of Eutectics, Dilip K. Das

Bachelors Theses and Reports, 1928 - 1970

The present paper is a result of work done on the study of structures of eutectics of a certain eutectic-forming binary systems. In this research work no systems with intermetallic compounds have been studied.