Digital Commons Network^™

Test 377: Massey-Harris Model 101-R, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 373: John Deere La, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere LA

TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear.

This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated.

BELT HORSEPOWER TESTS

TEST …

Test 366: John Deere B, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere B

TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear.

This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated.

BELT HORSEPOWER TESTS

TEST …

Electrodeposition Of Copper-Lead Alloys From A 7.2 Per Cent Amine Solution Saturated With Respect To Copper And Lead. Study Of The Production Of Cupric Oxide To Be Used As Solute, Edmund Simon Roszkowski

Masters Theses

"The purpose of this work is to deposit electrolytically a copper-lead alloy from an amine solution for use specifically as a bearing metal. Generally speaking there are four classes of bearing metals: tin base alloys or the babbitts; the cadmium base alloys or the white metals; the silver alloys; and the copper-lead alloys. Additions of other metals may be employed to produce alloys with certain desirable properties"--Introduction, page 1.

The Electrolytic Separation Of Copper, Nickel And Precious Metals From Copper-Nickel Matte, Oden Cass Garst

Professional Degree Theses

"During the last few years considerable interest has been shown in domestic reserves of strategic metals. Broadly speaking, the strategic materials of any nation are those materials of commerce essential to the country both in time of war and peace, which are not produced within the boundaries of that country in sufficient quantities to supply even peace-time requirements. The United States is far more fortunate than other countries inasmuch as there are only eight metals which may be classified as being strategic metals; namely, aluminum, antimony, chromium, manganese, nickel, mercury, tin, and tungsten. The work on nickel covered herein was …

Coal Mine Safety Engineering, Charles F. Herbert

Professional Degree Theses

"The progress of coal mine safety may be compared to the development in mining through the years. When coal was first discovered centuries ago, it was taken from river or creek beds and from the outcroppings on the sides of hills. After removing the most accessible coal from the surface, it was necessary to mine the coal by quarrying or stripping the overburden from the coal seams. It is reasonable to assume that when such operations began, accidents of a serious nature also began to occur. Such accidents were no doubt due to rolling rocks or stones, falling material, and …

The Chemical Engineering Aspects Of The Saint Louis Smoke Problem, George Augustus Hale

Professional Degree Theses

"During past years smokeless combustion of fuels has been conscientiously sought only in those larger industrial plants where fuel costs were a major factor. Smoke was considered a sign of prosperity in some moderate and even large size industrial practice, and no wholehearted effort was made to utilize the vast amount of energy lost through the smoke stack in the form of unoxidized carbon.

Inefficient combustion, which is so common today, is due in part to a wrong approach to the study of this problem. Industrial combustion, as a science, has, to a certain extent, been left to the mechanical …

Some Causes For Porosity And Leakage In Non-Ferrous Castings, Alfred H. Hesse

Professional Degree Theses

"Non-ferrous copper base alloys find many applications in industry. Among these alloys one finds the tin bronzes rather widely used for many purposes, and by delving still farther one finds pressure castings as one of their important applications. In many foundries the percentage of rejections due to leakage or porosity is quite high. This is obviously very costly since leakage is generally only found after machining. It is with a view to determine the causes for leakage in pressure castings and to devise methods for its prevention that the work described in this thesis was undertaken. It is not intended …

The Effect Of Glaze Fit Upon The Strength Of Missouri Zadock, Karl Emil Krill, Floyd Rolland Elliott

Bachelors Theses

"We know that, in the case of a beam, the really effective part of the cross-sectional area is that part farthest from the neutral axis. The I-beam, with most of the central area eliminated, is just as strong as is the rectangular beam of similar outside dimensions. Why should not the glaze on a piece of ceramic ware play as important a part in the strength of the piece as does the outermost area in a beam? Microscopic cracks in the flanges of an I-beam weaken it appreciably. Might not a parallel case exist in a piece of glazed pottery …

Dry Pressing Refractory Insulating Brick, Frank Clarence Steimke

Bachelors Theses

"The expensive process of grinding the insulating brick and the slow production methods of hand forming led to the possibilities of dry pressing the brick. The use of the dry press would increase production, give greater uniformity to the brick and materially reduce grinding if not eliminating it entirely. Since present day combustives were either impractical or else impossible to use, some new material must be found. Three materials presented themselves, napthalene, sulfur, and petroleum coke. The former for its low melting temperature and the latter two for their complete volatility at high temperatures and low if not negligible resiliency. …

Firing Behavior Of Missouri Plastic Fire Clay, William E. Crockett

Bachelors Theses

"There are two districts in Missouri in which plastic fire clay occurs. The oldest and least significant of these deposits is the "Cheltenham", in the St. Louis area. The most prominent area in which plastic fire clay occurs is generally termed the "east central" district. Included in this district are Calloway, Montgomery, Audrain, Warren, Boone, Monroe, Pike and Lincoln Counties. The clay as tested in this report occurs in Boone County, near Columbia. A plastic fire clay does not have as high a P.C.E. (pyrometric cone equivalent) as the ordinary flint and semi-flint clays, but its high plasticity warrants its …

Solubility Of Glass Tank Refractories Using A Small Electrically Heated Furnace, James Vincent Heddell

Bachelors Theses

"This investigation was undertaken to study the refractory blocks used in glass furnaces - their relation with the molten glass. It was decided to employ for this examination a model glass tank, heated by electrical carborundum resistors known as Globars. Experimental glass tanks have been constructed using fuel oil or gas to obtain the required heat to perform melting. These fuels were used mainly to simulate commercial practice and thus to obtain results which could be easily applied to industrial furnaces. The design of a model electric tank is included as part of this investigation"--Purpose of the Investigation, page 4-5.

The System Benzene-Methyl Alcohol : ǂB Densities, Refractive Indices, Boiling Points, And Specific Heats., Samuel Rosenberg 1918-

Electronic Theses and Dissertations

No abstract provided.

Newark Engineering Notes, Volume 4, No. 1, November, 1940, Newark College Of Engineering

Newark Engineering Notes

A journal by the administration, faculty and alumni of the Newark College of Engineering. This issue includes: "The President's Diary" by Allan R. Cullimore "Defense Shelters for Civilians" by Harold N. Cummings "Highways and Defense" by Robert W. Van Houten "Bomb Shelters as Recreation Rooms" by Odd Albert "The Cover Design" "A Precision "Q" Meter" by Alfred Heinz "Some Fundamentals of Geology" by D. C. Frost "Named Adviser for Training" "Economics for Industrial Engineers" by George D. Wilkinson "Graduate Students—Newark College of Engineering" "Promotions and Appointments" "Professionalities" "A. S. M. E. Student Chapter Growth" "Fall Convocation Addressed" by Dr. Jackson …

A Geological Report On An Area Five Miles Southeast Of Renova, Montana, And On An Area Seven Miles South Of Jefferson Island, Montana, Herman Neibauer

Bachelors Theses and Reports, 1928 - 1970

This trip was conducted to give those students working for their respective degrees an excellent opportunity to work under actual field conditions. A total of three weeks was taken to complete the required work. Two weeks were spent in the field gathering data, and making maps, and the last week was spent in the drawing room at the college preparing the final map.

Fm 30-15, Examination Of Enemy Personnel, Repatriates, Documents, And Materiel. July 22, 1940, Robert Bolin Depositor

United States Department of Defense Military Intelligence

Three-fourth of this manual deals with the treatment of enemy personnel and repatriates, one quarter with documents, and only one brief section, about 1 page, with enemy materiel.

Newark Engineering Notes, Volume 3, No. 4, May, 1940, Newark College Of Engineering

Newark Engineering Notes

A journal by the administration, faculty and alumni of the Newark College of Engineering. This issue includes: "The President's Diary" by Allan R. Cullimore "The Engineer in Public Service" by Joseph M. Byrne, Jr. "Peter Homack Wins Award" "Why Should I Study This?" by James A. Bradley "The General Quadratic, or Conic, Angle and Its Functions" by Albert A. Nims "An Automatic Slide-Back V. T. Voltmeter" by Philip E. Volz "Civilian Pilot Training Course" "An Optical Method of Visualizing Low Velocity Air Flow" by Stanley Corrsin "Promotions and Appointments" "Co-Operative Plan for Graduate Work "General Motors Assembly of College Students" …

The Age-Hardening Of Aluminum With Mgzn2, Sidney E. Worthen

Bachelors Theses and Reports, 1928 - 1970

The purpose of this thesis is to investigate the age-hardening of aluminum with magnesium and zinc in such proportions as to conform to the compound MgZn₂.

Because of a lack of time and proper equipment, the only property investigated was the hardness as indicated by the Rockwell Superficial Hardness Tester.

The Investigation Of Different Variables In The Assaying Of Silver Cyanide Solution, Warren M. Mahan

Bachelors Theses and Reports, 1928 - 1970

The assaying of gold and silver cyanide solutions is by no means new. The first method of analysis which is given in the literature is an evaporation method by S. B. Christy in 1896. However, the fire assaying of gold and silver dates further back than this. There is a method of fire assaying for gold and silver given in literature as early as 1556 in Georgius, Agricola’s De Re Metallica book.

The Measurement Of Current Efficiency In Zinc Sulphate Electrolytes Containing Antimony And Cobalt By Hydrogen Evolution, Arthur R. Hard

Bachelors Theses and Reports, 1928 - 1970

The measurement of current efficiency by hydrogen evolution is based on the assumption that the portion of the current which deposits no zinc will release hydrogen. This assumption is correct for solutions containing no impurities electropositive to zinc.

The Geology And Mineralogy Of The Independence Mining District, Alan Kuhlman

Bachelors Theses and Reports, 1928 - 1970

From 1888 until 1893 the district was a booming mining camp. Seven stamp mills were running and ore was be­ing mined from the Independence, King Solomon, Poorman, Golden, Hidden Treasure and Crown claims. The town of Independence, which was on the Boulder River at the fork of Basin Creek, boasted a population of 400 people.

A Study Of Metallic Eutectics, Robert P. Corbett

Bachelors Theses and Reports, 1928 - 1970

All of the metals have definite melting points. When a metal is heated above the melting point, it exists as a liquid. Now if the melt is allowed to cool, it will solidify when a temperature corresponding to the melting point is reached.

However, if one metal is added to another metal, both of which are mutually soluble in the liquid state, a certain effect can be noted. The melt will not solid­ify when the melting point of the pure metal is reached, but will freeze at a lower temperature.

Areal Geology Of The Post-Paleozoic Surface Of The Northwest Plains, William M. Broderick

Bachelors Theses and Reports, 1928 - 1970

Probably most of the area included in this report has been ex­amined to some extent by oil geologists, and most, if not all, of the important domes have been discovered and surveyed thoroughly. In parts of the area, the bedrock is covered by glacial drift or alluvium materi­al, but it is reasonable to believe that no new domal structure will be found. This means that surface examination alone will be insufficient in locating new oil fields, so future prospecting will be dependent, to a great extent, on studies of sub-surface stratigraphy.

A Study Of The Concentration Of A Copper-Zinc Ore., Kenneth L. M. Dodd

Bachelors Theses and Reports, 1928 - 1970

The ore under investigation in this thesis is a copper-zinc ore which came from the state of New Mexico. The exact location is unobtainable. The purpose of the investigation was to determine the most effective means of concentration of the valuable min­erals present in the ore.

The Testing And Concentration Of A Low Grade Copper-Nickel Ore., Laurence T. Eck

Bachelors Theses and Reports, 1928 - 1970

The purpose of this thesis is to investigate the possi­bility of concentrating a low grade copper-nickel ore, to determine the most effective method of concentration, and to attempt to draw some conclusions to determine whether or not the concentrates produced would be of sufficient high grade to make the recovery of nickel and copper a profit­able enterprise.

Geology And Ore Deposits Of The Jardine Mining District, Park County, Montana, Douglas M. Dowell

Bachelors Theses and Reports, 1928 - 1970

The Jardine Mining district is in the extreme southern part of Park County, Montana. Jardine is five and one-half miles northeast of Gardiner, Montana, the northern entrance to Yellowstone National Park.

The Electrolytic Recovery Of Copper And Zinc From Scrap Brass With Special Reference To Lead-Bearing Brass., Frederick A. Hames

Bachelors Theses and Reports, 1928 - 1970

Several methods have been investigated, with some success, for treating scrap brass to recover copper and zinc, either as pure metals or as salts of the metals. One of the more promising of these methods is electrolysis in sulfate solution for the recovery of pure copper and zinc.

Electrolysis Of Molten Mixtures Of Galena And Lead Chloride., Donald Q. Cole

Bachelors Theses and Reports, 1928 - 1970

Electrolysis of molten mixtures of lead chloride and galena was carried out under various conditions of temperature, time, composition, and current densities; without a diaphram, and with various diaphrams. Continuous runs, with necessary additions of lead sulfide and lead chloride to maintain a melt of the proper composition, were attempted on a small scale.

A Study Of The Effect Of Third Metals On The Wetting Properties Of Solders, William L. O'Brien

Bachelors Theses and Reports, 1928 - 1970

Solders are not new alloys, since they were known in late Roman times when they were mentioned by Pliny. These solders differed very little from our modern ones. Tertiarium, consisting of one part of tin to two parts of lead, is known today as plumbers solder; and argentarium, consisting of equal parts of lend and tin, is still extensively used for many purposes.

Geology And Ore Deposits Of The Clinton Mining District, James F. Piquette

Bachelors Theses and Reports, 1928 - 1970

This report includes the results of geological investigation of the Clinton Mining District and the Hidden Treasure Mine.The Clinton Mining District is an unorganized mining dis­trict situated in the Garnet Range two and one-half miles northeast of the town of Clinton, Montana, which is on the Northern Pacific Railway and the Chicago_, Milwaukee, St. Paul, and Pacific Railroad seventeen miles east of the city of Missoula.

The district is in the same range of mountains as the Gar­net Mining District and the drainage from the district covered is to the south into the Hell Gate or Clarks Fork of …